Maunal Cheque updation

Dear Gurus
  When I was updating the  manual check updation  in FCH5 , system gives the error message
Lot 0037 is full and does not have a next lot
Message no. FS548
Can anyone give me the valuable inputs
Regards
Sri

Yes dear,
It is because of check lot number 0037 is used fully and no number is left to be assigned...
do one thing.....enter check lot number 0038 in the field Next Lot so system will take next available number from check lot 0038
Regards,
Chintan Joshi

Similar Messages

  • Importance of Cheque updation...

    Hi,
    Can any body explain me why we need to update the cheque clearance date......The usefull?
    thanks in advance
    Renu

    Hi
    Check Clearance Date is used for the Reconciliation purpose to know on which date the issued check has been cleared.
    Regards
    venkat

  • Issue same cheque

    Hi gurus,
    I have an issue.That is i posted vendor invoice in fb60
    Posted the payment in f-53
    cheque updated in fch5
    now it cleared.But i posted by mistake wrongly.Now i want to cancel the cheque payment and i want to issue the same cheque number .Please help.
    Thanks&Regards
    Raja

    Hi Waza,
    Thanks for your immediate reply.In fch8 we void the cheque.Then if we want to issue the same cheque number .can we issue?
    Thanks&Regards
    Raja

  • Cancellation of cheque date

    Hi Gurus,
    I have a requirement like: Doc Posting is date is: 15/07/2014 and payment date is: 16/07/2014. Aging should be calculated?
    The Biggest task is: Say they had a posted a vendor liability document on 15/07/2014 and payment has been made for the same on 16/07/2014.
    The aging would be 1 one day. On the next day 17/07/2014 they realised the need to cancel they cheque for some XXXX reasons.
    The cancellation of cheque is picking up the the document posting date which is: 15/07/2014. When they reissue the cheque for the same vendor on  18/07/2014. The aging is calculating as :15/07/2014 - 18/07/2014 which is 3 days. But client want the aging to be calculated from the reissue of the cheque.
    Any help on this is really appreciated...
    BR
    Rohit Raj....

    Hi Tejas,
    The client pays all  there vendors thourgh APP. So manula cheque updation is ruled out.
    The manual Clearing is also no done at the client place. even this ruled out. They will pay complete vendor liability amt on the next day.
    They will void they cheque through FCH8 which you mentioned. They have the same report which will give them the documents which got voided....

  • High Severity issue

    Hi sap gurus please helpme this issue,
    1.In f-43 user tried to 3 posting invoice(Ex:-100150250) belongs to one vendor.
    2.in f-53 user tried to post total payment(Ex:- 500) belong to that particular vendor.
    3.in fch5 transaction code user tried post manual cheque updation belongs to that particular vendor.
    4.Next user tried to delete uncashment date in fchg after user tried to void this cheque payment in fch9
    5.but user tried to  reverse that particular document in fb08,but system shows this Error "document includes already cleared items-reversal not possible   message number-f5308."
                            please give suggestion about on this issue.
    this is high level severity issue.pls help me.
    Thanks & Regards,
    Sri

    i tried to this transaction, but system shows this error
    "Document 3001039449 SD01 2008 is not a clearing document"Message no. FS598.
           what i am saying 3 document numbers belongs to one cheque number like.,
    Document 3001039449(150)
    Document 3001039450(250)   -
      cheque number-971506(500)
    Document 3001039451(100)
    Thanks & Regards,
    Sri

  • Cheque numbers are not completely updated for all payment document

    Hi,
    In the Automatic Payment Program, system is not able to update cheque
    numbers for some of the payment documents which were generated in one
    APP run. This issue, we are facing only in Production Server. APP
    The extraction of Payment details are not possible if the cheque has been
    generated manually. Hence we want the system should update the cheque
    numbers automatically without skipping some of the documents.
    Please look into the issue and revert us.
    Thanks,
    Malathi Reddy.

    hai,
    Goto FCHU and give the doucment number and check number. then sytem will post the cheque number to that document in assignment filed. This will solve your problem.
    FCHU is also one of the process to be done by the user.
    award points.
    govind.

  • Update cheque encashment date without posting

    Dear Expert,
    i am looking for a solution, whereby the check encashment date can be
    updated without any posting done. this need to be done on a weekly basis
    i have explored program;RFEBCK00 & txn code; FCHR but it generated posting,
    if there any other standard program that does that
    only FCH6 can do that. is there any standard program for mass cheque
    encashment date update?
    currently exploring FFB4
    regard

    Hello
    Where you able to get any program that will load the encashement date without generating posting?

  • Function Module or BAPI to update the cheque payments

    Hi Everyone,
    I would like to know whether we have any Function Module or BAPI which can update the cheque payment or its attributes into SAP.
    Thanks,
    KC
    Message was edited by:
            kittu chowdary

    Aniruddha,
    Does this BAPI update the Transactions FCH6, FCH9 ?
    Thanks,
    KC

  • Update Cheque number manually as well as automatically

    Hi,
    Kindly help me in assigning cheque number against all the outgoing payments manually as well as automatically.
    Also whether system puts a control of restricting wrong cheque while doing input for any outgoing GL A/c.
    Regards,
    Vikas

    for manual assignment you may use FCH5 transaction.
    Automatically, the cheque numbers are selected from the cheque lot you have configured.
    Regards

  • Updating songs maunally

    I have set my itunes to not update songs every time i plug my ipod in: i do it by hand. I just put a cd into my computer. Now, it is in my library folder, but i want to get it into my ipod where it said My Name's Ipod.
    I drag it in, and it wont work. I even drag the whole "folder" into Alexa's Ipod, and that wont work

    Just to be sure everything is set up correctly, check your update preferences. Connect the iPod and when it appears in the source list go to iTunes>Preferences>iPod> Music tab and make sure the "manually manage songs and playlists" radio button is checked.

  • Issue in TDS Challan Updation

    Hi
    I have an issue in which we have created a vendor invoice through F-02. The same has also been paid by creating an entry through F-02. However, when we are taking a challan for the same through j1inchln with the payment document number. the same is not showing. The system is giving an error that the document has not been updated in WITH_ITEM table.
    The payment cheque has also been cleared from the Bank A/c.
    Regards
    RS

    Hi,
    It looks like that, TDS line item has been created manually. If it was created manually it won't update in WITH_ITEM table.
    Only soultion is you have to issue a mannual TDS certificate to your vendor.
    All the best
    Prasad

  • Cheque printed but  fi document not created (line  item shows as open item)

    Hi,
    Problem Description :
    F110
    In  payment run Posting order is not matching it shows 11 generated and 10 completed .
    Due to this, document number 5100316279( i.e open item)  was not cleared but generated a cheque 809635 for 58.75
    The same document number  5100316279got cleared on  01.07.2008 ; payment run  and generated another cheque 809643 for same amount 58.75
    To summarize due to a system error we ended in a double payment to the  vendor.
    Request you  help us to solve  this issue.
    Thanks.

    Hi,
    The reason why you have more documents generated than completed is that update terminations on the executing the payment run.It means some documents were not posted in the data base. You could find the terminated update via using SM13.
    Here is some information saying what you have to do when this happens:
    You need to analyse the update record data to decide what has to be done with the update records. In order to analyse the record data, use transaction SM13 for terminated updates. By double-clicking on the terminated update records, the updates modules are displayed. By double-clicking on the function module 'POST_DOCUMENT' with error status you can see in whick line item the clearing has failed. Please use
    'Goto => Display data'. In table T_BKPF and T_BSEG are the data of the entered document. Important are CPU-Date (T_BKPF-CPUDT) and Time (T_BKPF-CPUTM). In table T_AUSZ1 is the the information which line item
    (BELNR, BUKRS, GJAHR, BUZEI) should be cleared with this update record.
    Afterwards, execute FB03 for this document and determine the clearing document BSEG-AUGBL for this line item. Analysing this clearing document with data of the terminated update records you have to decide what has to be done with this update record.
    For repeating the update task it is necessary that the clearing of the Open item is reset with transaction FBRA. Without resetting the other Clearing you will always get error F1 805 in the function module 'POST_DOCUMENT'.
    So can you please analyse the data concerning the update termination. Depending on the investigation, you have to decide, whether the data has to be re-entered or whether the update task can be deleted or whether the clearing has to be reset and the task has to be repeated.
    With regards,
    V.Krishnamoorthy

  • How can i update regup-sgtxt field in sap script

    Hi experts,
    I have created sap script for payment print prog. In that one field is amount discription "REGUP-SGTXT". i want to use field "REGUP-SGTXT" as a discription. for sap script payment print i use T-Code f-43, fb03,f-58... now in whic T-code i fiiled the value of "REGUP-SGTXT"?? how can i update value in my sap script?? cause i ceateed so many doc no but "REGUP-SGTXT" its blank... so how can i fill this fiels???
    Give me suggetion
    Zenithi

    Hi
    Most of the times this text won't get populated
    So better write an external PERFORM subroutine in the SCRIPT and fetch it from BSEG/BKPF tables using BELNR field and use in the cheque printing.
    see the sample code for subroutines
    How to call a subroutine form SAPscripts
    The Form :
    /:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
    /:USING &EKKO-EBELN&
    /:CHANGING &CDECENT&
    /:ENDPERFORM
    The report :
    REPORT zkrpmm_perform_z1medruck .
    DATA : BEGIN OF it_input_table OCCURS 10.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_input_table.
    déclaration de la table output_table contenant les
    variables exportées
    DATA : BEGIN OF it_output_table OCCURS 0.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_output_table.
    DATA : w_ebeln LIKE ekko-ebeln,
    w_vbeln LIKE vbak-vbeln,
    w_zcdffa LIKE vbak-zcdffa.
    FORM CDE_CENT
    FORM cde_cent TABLES input output.
    it_input_table[] = input[].
    it_output_table[] = output[].
    READ TABLE it_input_table INDEX 1.
    MOVE it_input_table-value TO w_ebeln.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = w_ebeln
    IMPORTING
    output = w_ebeln.
    SELECT SINGLE zcdffa FROM ekko
    INTO w_zcdffa
    WHERE ebeln = w_ebeln.
    it_output_table-name = 'CDECENT'.
    MOVE w_zcdffa TO it_output_table-value.
    MODIFY it_output_table INDEX 1.
    output[] = it_output_table[].
    ENDFORM.
    /: PERFORM
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    Example:
    In script form
    /: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
    /: USING &EKKO-EKORG&
    /: USING &EKPO-WERKS&
    /: USING &EKKO-EKGRP&
    /: USING &EKKO-BSTYP&
    /: CHANGING &COMPNAME&
    /: CHANGING &SENDADR&
    /: CHANGING &INVCADR&
    /: CHANGING &COMPADR&
    /: CHANGING &COVERLTR&
    /: CHANGING &SHIPADR&
    /: CHANGING &REMINDER&
    /: CHANGING &REJECTION&
    /: CHANGING &POSTADR&
    /: CHANGING &LOGO&
    /: ENDPERFORM
    In program
    FORM Read_texts - To extract the standard texts from the table *
    FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA : L_EKORG TYPE EKORG,
    L_WERKS TYPE WERKS_D,
    L_BSTYP TYPE BSTYP,
    L_EKGRP TYPE BKGRP.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
    CHECK SY-SUBRC = 0.
    L_EKORG = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
    CHECK SY-SUBRC = 0.
    L_WERKS = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
    CHECK SY-SUBRC = 0.
    L_EKGRP = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
    CHECK SY-SUBRC = 0.
    L_BSTYP = IN_PAR-VALUE.
    CLEAR Z08M1_ORG_TEXTS.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = L_BSTYP.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = SPACE.
    ENDIF.
    READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SENDADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'INVCADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COMPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REMINDER'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REJECTION'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'POSTADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'LOGO'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    REPORT ZMPO1 .
    form get_freight tables in_par structure itcsy out_par structure itcsy.
    tables: ekko,konv,t685t.
    data: begin of itab occurs 0,
             ebeln like ekko-ebeln,
             knumv like ekko-knumv,
           end of itab.
    data: begin of itab1 occurs 0,
             knumv like konv-knumv,
             kposn like konv-kposn,
             kschl like konv-kschl,
             kbetr like konv-kbetr,
             waers like konv-waers,
             kwert like konv-kwert,
           end of itab1.
    data: begin of iout occurs 0,
             kschl like konv-kschl,
             vtext like t685t-vtext,
             kbetr like konv-kbetr,
             kwert like konv-kwert,
           end of iout.
    data v_po like ekko-ebeln.
    read table in_par with key 'EKKO-EBELN'.
    if sy-subrc = 0.
       v_po = in_par-value.
       select
         ebeln
         knumv
      from ekko
      into table itab
      where ebeln = v_po.
      if sy-subrc = 0.
        loop at itab.
          select
            knumv
            kposn
            kschl
            kbetr
            waers
            kwert
          into table itab1
          from konv
          where knumv = itab-knumv and
                kappl = 'M'.
        endloop.
        loop at itab1.
          if itab1-kposn <> 0.
            select single * from t685t
                              where kschl = itab1-kschl
                                and kappl = 'M'
                                and spras = 'EN'.
            iout-vtext = t685t-vtext.
            iout-kschl = itab1-kschl.
            iout-kbetr = itab1-kbetr.
            iout-kwert = itab1-kwert.
            append iout.
            clear iout.
          endif.
        endloop.
        sort itab1 by kposn.
        loop at iout.
          sort iout by kschl.
          if ( iout-kschl eq 'GSDC' OR
               iout-kschl eq 'GSFR' OR
               iout-kschl eq 'GSIR' ).
            at end of kschl.
              read table iout index sy-tabix.
              sum.
             write:/ iout-kschl,iout-vtext,iout-kwert.
          out_par-name = 'A1'.
          out_par-value = iout-vtext.
          append out_par.
          out_par-name = 'A2'.
          out_par-value = iout-kwert.
          append out_par.
              endat.
            endif.
          endloop.
        endif.
      endif.
    endform.
    IN THE FORM I AM WRITING THIS CODE.
    /:DEFINE &A1& = ' '
    /:DEFINE &A2& = ' '
    /:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
    /:USING &EKKO-EBELN&
    /:CHANGING &A1&
    /:CHANGING &A2&
    /:ENDPERFORM
    &A1&
    &A2&
    This Code is to be written in the PO form under ADDRESS window.
    /:DEFINE &A1& = ' '
    /:DEFINE &A2& = ' '
    /:DEFINE &A3& = ' '
    /:DEFINE &A4& = ' '
    /:DEFINE &A5& = ' '
    /:DEFINE &A6& = ' '
    /:PERFORM GET_VENDOR IN PROGRAM ZMFORM_PO
    /:USING &EKKO-EBELN&
    /:CHANGING &A1&
    /:CHANGING &A2&
    /:CHANGING &A3&
    /:CHANGING &A4&
    /:CHANGING &A5&
    /:CHANGING &A6&
    /:ENDPERFORM
    &A1&
    &A2&
    &A3&
    &A4&
    &A5&
    &A6&
    Regards
    Anji

  • Updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    Maunally restore it. In order to do this:
    -Download the iOS 5.1.1 firmware from here  http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
    1. After downloading the firmware from the given link, open iTunes and click on your device.
    2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
    3. A dialog box will appear.
    4. Select the firmware you downloaded and click ok.
    5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards.

  • Updating the Assignment Field (ZUONR) with Check No

    Hi
    Can anyone help me please?
    I would like to update the assignment field (ZUONR) in the Bank Payables Clearing Account with the cheque number from the payment run (PAYR-CHECF).
    1.  Firstly is this possible?; and
    2.  If so could you explain how I do this.
    Thanks in advance for your assistance on this issue.
    Regards
    Claire

    Hi
    I would but there is no sort key which contains this, nor can I create one :o(.
    If you are aware of how I can do this then please let me know.  Is there a user exit which will populate this field when a payment has been made?
    Regards
    Claire

Maybe you are looking for