Maverick and Avid Interface

I am a faithful apple user but this maverick software shut down my home studio, I have a core 2 processor on a imac from 2010. Update the drivers please ASAP

Apple does not make the drivers for your audio interface. This is the responsiblity of your device's manufacturer. You might see if there are updated drivers on the device manufacturer's website.
This is a user-to-user discussion which is not monitored by Apple for feedback purposes, so even if Apple did make the drivers, your post here would not do any good.
Try uninstalling the drivers you have and see if your Avid interface will work. I have a Focusrite audio interface. The drivers that Focusrite supplied for it never worked. The Focusrite people really tried, they kept sending me beta versions, but none of them ever worked, with Mountain Lion or Mavericks. Then I just uninstalled all the Focusrite software and drivers that were on my Mac and the interface worked.

Similar Messages

"Error Disk too Slow" Macbook Pro 2011 - Maverick and Yosemite - The Great Grand Mystery Unfolds!!!

Hey everybody,
Logic Pro X user here, have a late 2011 Macbook Pro, upgraded to 16gb of ram, 2.8ghz intel core i7, running latest version of Mavericks and more recently on a separate partition I tried Yosemite with a clean install of only Logic Pro X.
I use Apogee Quartet as my audio interface, I have a OWC Mercury Elite Firewire 800 external drive that I record to, all LPX files are on my internal drive.
Before Mavericks I had 0 issues with this setup, no with just one sole drummer track, or one single audio or software track, I get the various disk too slow errors after a few seconds.
I have tried reinstalling LPX, I tried a clean partition with nothing but Logic Pro on it (both Mavericks and Yosemite).
I have reset my PRAM and used Apple Hardware diagnostics as well as memtest (i think it was called) and even reverted back to my old original RAM that came with the computer. All hardware tests passed, I have verified and repaired disks from disk utility as well as from the recovery partition.
I have worked with Apple a bit over the phone doing these things, I have also read just about every thread on this pervasive issue. And its ruining my experience as a user. I absolutely loved Logic on Mountain Lion, no issues whatsoever! I'm considering reverting back to it actually.
On a side note I also have a HDMI Tv connected through the thunderbolt display, and a self powered USB hub that I connect my wireless mouse, iPhone cable and WD MY passport drive (which I only use for Time Machine).
I'm basically at my wits end and open to anybodies suggestions, I even tried resting the SMC and several other things advised in these forums.
I'm Stil under Apple Care and wondering if going into them is my only hope left.
I find that garageband acts the same, but I have no other system issues! its so bizarre, performance on all other programs is totally fine, its only when I want to record that I get issues.
For the record I do have some 3rd party VTS (Arturia V collection, EZ drummer 2 and AMplitube) but when I did the clean partition they weren't there and I still had the disk to slow error, so I'm not convinced its because of those.
Also Since the partition I obviously have played with my storage but I still have 75 gas of space on the mavericks partition (out of 500gb ) and on Yosemite partition I have 125 gbs available and on my Firewire external drive I have about 150gb left on a 500gb drive, so I'm not convinced its a space issue either (especially since before Mavericks Mountain Lion seemed to work just fine.)
HELP! Please help...I'm so exhausted trying to fix this on my own, and admittedly I've run to the end of my own capacity and don't know where to go from here.
Thank you for any suggestions, sorry for the long post, and if I have left anything out please let me know, this is my first post.

And yes I did upgrade my apogee drivers to the recent ones they just released.

How to connect to AVID interface

I am using Avid interface and would like to connect with Logic but I am lost, can any one help with this please? thanks

hi,if the network have been configed, you can use telnet directly connect the SL500 .use pulic interface.

Using avid m-audio fast track and avid m-audio fast track solo together

I Wanted to use avid m-audio fast track and avid m-audio fast track solo together so that I can get 4 inputs
i I tried to select it, but could enable any one only. How can I use them together??

You can use only one device at a time I Logic. However, in the Audio MIDI Setup utility (Applications>Utilities) you can create an aggregate device, which effectively combines multiple devices into one "virtual" device, which you can then choose in Logics' coreaudio device setup.
How to combine multiple audio interfaces by creating an aggregate device

Remote and local interface on same ejb 3.0 bean instance

Hi,
Is it posible to get remote and local interface on same ejb 3.0 bean instance.
For example get local interface of a bean and than pass it as remote to client.
Both interfaces must operate on same bean instance.
Thanks
Zlaja

yes. You can implement multiple interfaces on a single class, so you can add a local and a remote interface. One trick to avoid duplicate code is to simply make the remote interface extend the local interface; then you only have to add the @Remote annotation and you're done.
For example get local interface of a bean and than pass it as remote to client.You don't pass an instances to a client, a client looks up a remote instance of the bean through JNDI.

The difference between IEEE802.1Q Native VLAN sub-interface and Physical interface?

Hello
I think the following topologies are supported for Cisco Routers
And the Physical interface also can be using as Native VLAN interface right?
Topology 1.
R1 Gi0.1 ------ IEEE802.1Q Tunneling L2SW ------ Gi0 R2
R1 - configuration
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
ip address 10.0.0.1 255.255.255.0
Topology 2.
R1 Gi0 ------ IEEE802.1Q Tunneling L2SW ------ Gi0 R2
interface GigabitEthernet0
ip address 10.0.0.1 255.255.255.0
And is it ok to use the physical interface and sub-interface with dynamic routing such as EIGRP or OSPF etc?
R1 Gi 0 ---- Point to Multipoint EIGRP or OSPF ---- Gi0 R2 / R3
Gi 0.20--- Point to Point EIGRP or OSPF --- Gi0.10 R4 (same VLAN-ID)
R1 - configuration
interface GigabitEthernet0
ip address 10.0.0.1 255.255.255.0
interface GigabitEthernet8.20
encapsulation dot1Q 20
ip address 20.0.0.1 255.255.255.0
Any information is very appreciated. but if there is any CCO document please let me know.
Thank you very much and regards,
Masanobu Hiyoshi

Hello,
The diagram is helpful.
If I am getting you correctly, you have three routers interconnected by a switch, and you want them to operate in a hub-and-spoke fashion even though the switch is capable of allowing direct communication between any of these routers.
Your first scenario is concerned with all three routers being in the same VLAN, and by using neighbor commands, you force these routers to establish targeted EIGRP adjacencies R1-R2 and R1-R3, with R1 being the hub.
Your second scenario is concerned with creating one VLAN per spoke, having subinterfaces for each spoke VLAN created on R1 as the router, and putting each spoke just in its own VLAN.
Your scenarios are not really concerned with the concept of native VLAN or the way it is configured, to be honest. Whether you use a native VLAN in either of your scenarios, or whether you configure the native VLAN on a subinterface or on the physical interface makes no difference. There is simply no difference to using or not using a native VLAN in any of your scenarios, and there is no difference to the native VLAN configuration being placed on a physical interface or a subinterface. It's as plain as that. Both your scenarios will work.
My personal opinion, though, is that forcing routers on a broadcast multi-access segment such as Ethernet to operate in a hub-and-spoke fashion is somewhat artificial. Why would you want to do this? Both scenarios have drawbacks: in the first scenario, you need to add a neighbor statement for each spoke to the hub, limiting the scalability. In the second scenario, you waste VLANs and IP subnets if there are many spokes. The primary question is, though: why would you want an Ethernet segment to operate as a hub-and-spoke network? Sure, these things are done but they are motivated by specific needs so I would like to know if you have any.
Even if you needed your network to operate in a hub-and-spoke mode, there are more efficient means of achieving that: Cisco switches support so-called protected ports that are prevented from talking to each other. By configuring the switch ports to spokes as protected, you will prevent the spokes from seeing each other. You would not need, then, to configure static neighbors in EIGRP, or to waste VLANs for individual spokes. What you would need to do would be deactivating the split horizon on R1's interface, and using the ip next-hop-self eigrp command on R1 to tweak the next hop information to point to R1 so that the spokes do not attempt to route packets to each other directly but rather route them over R1.
I do not believe I have seen any special CCO documents regarding the use of physical interfaces or subinterfaces for native VLAN or for your scenarios.
Best regards,
Peter

What is the diff b/w Abstract class and an interface ?

Hey
I am always confused as with this issue : diff b/w Abstract class and an interface ?
Which is more powerful in what situation.
Regards
Vinay

Hi, Don't worry I am teach you
Abstract class and Interface
An abstract class can have instance methods that implement a default behavior. An Interface can only declare constants and instance methods, but cannot implement default behavior and all methods are implicitly abstract. An interface has all public members and no implementation. An abstract class is a class which may have the usual flavors of class members (private, protected, etc.), but has some abstract methods.
Edited by SASIKUMARA
SIT INNOVATIONS- Chennai
Message was edited by:
sasikumara
Message was edited by:
sasikumara

Remote and Home interface binding to an EJB2.1/3.0 bean.

When deploying a complete ejb bean,
-What associated a bean class, within the container,
with it's home and remote interfaces?
-JBoss Application server requires that the Bean class
directly implement both interfaces.
-Assuming EJB 2.1, is this approached by
interface implementation, a naming convention,
a common location in a package/directory,
or is this put in the deployment descriptor xml file?
What is the standard approach?
Z.

If you have included the HTTP server with your 10.1.3.2 installation you could also setup a proxy/proxy-reverse setup in the portal http server for the /app08 mountpoint and point this to your 10.1.3.2 server....

Remote and Home Interfaces

Why do we need a home interface and remote interface for a ejb.
Must these interfaces be there for each ejb?

Why do we need a home interface and remote interface
for a ejb.The Home interface is like a factory for getting to your beans. The remote interface is what you use to speak "directly" to the bean. It's remote because the bean is usually on a remote server somewhere (not in the same VM as your client code). The same is true for the home interface in terms of it being remote.
The corresponding LocalHome and Local interfaces are for use when the bean in question is not remote.
Must these interfaces be there for each ejb?You need either a Home and Remote or LocalHome and Local interface for all beans except Message Driven Beans.

Hi i have just downloaded maverick and cannot find a search icon that'l stay on my toolbar

just up graded to mavericks and i cannot find a search icon that'll stay on my tool bar..? i can find the one in edit/find but it closes after use. also safari help does now not work... would much appreciate some help
thanks
nicola6

In Snow Leopard the Spotlight access is exactly the same. The only search field is in the Safari toolbar, and this has been amalgamated with the address field - as I said above, just type the search terms in the address field:

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

How to connect to third party using PI for outbound and inbound interfaces

Hello,
I have scenarios where I have data coming in from third party EDI subsystem and sent to SAP. And also from SAP to EDI subsystem. We need to send the XMLs to the EDI subsystema nd also receive XMLs.
Can someone please suggest the ways I can connect to EDI subsytem for both Outbound and Inbound interfaces.
Thanks

Hi Prabhu,
EDI file is different from the normal flat or xml file. Hope you understand the difference.
Now if your EDI subsytem has the capability of converting the xml file to edi file viceversa then create and receive the xml file from the EDI subsystem. For the xml file you may use the file adapter as an option.
If it doesnot have the capability then seeburger adapter needs to be used. This is not an inbuilt adapter. So your company needs to purchase it.
Regards,
---Satish

Can't open Pages '09 Document (Upgraded to Mavericks and Pages 5.0))

There is one Pages '09 file that I can not open now that I have upgraded to Mavericks and the new Pages. Of course it is an assignment that my son needs for school! When I double-click on it I get the message that the document could not be read, that it does not have a valid format. I tried opening it with the 4.3 version of Pages, but get the same result. I also tried to pull the document from the time machine, and same problem.
Any suggestions/work-arounds? I tried simply renaming the file format--no luck. Do I need to repair permissions?
I am on a 3-week old iMac 2.7 GHz Intel Core i5 with 8GB 1600 MHz DDr3, 1GB old school drive.
Jim

Maybe try what was suggested here:
https://discussions.apple.com/thread/5466954?tstart=0
"I had this problem with both pages and numbers so I closed all the background apps did a reset by holding down the home and power buttons and now they both work."

I updated the maverick and now mail won't open at all

i updated the maverick and now mail won't open at all

Have you tired opening it from the Applications folder?
What happens when you try to open Mail?

Recently upgraded to Mavericks and iMovie '13, and suddenly I'm beach balling like mad?

I upgraded to Mavericks and iMovie '13 recently, and have been working on a video project in iMovie for the last few days. I hadn't been having any issues, but now I'm 'beach-balling' almost constantly, not just in iMovie, but everywhere. Opening a new app (iMovie/Chrome/Safari) will cause beachballs, and sometimes iMovie will fail to launch entirely, appearing as 'Not Responding' in Force Quit. Even using the Finder bar has caused beachballs. I've removed extraneous apps, cleared hard drive space, performed Disk Repair, and am not seeing much improvement. My EtreCheck output is as follows:
EtreCheck version: 1.9.11 (43) - report generated June 12, 2014 at 2:37:47 PM EDT
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.9 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: (null)
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:48:8
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (389.64 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] com.logmein.hamachi (1.0) Support
          [not loaded] com.tascam.usb2audio.driver (2.0.4) Support
          [not loaded] com.tascam.usb2audio.driver_TIGER (2.0.4) Support
Launch Daemons:
          [running] com.adobe.ARM.[...].plist Support
          [loaded] com.adobe.fpsaud.plist Support
          [invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [failed] com.logmein.hamachimb.plist Support
          [invalid] com.oracle.java.Java-Updater.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.google.keystone.agent.plist Support
User Login Items:
          iTunesHelper
          Dropbox
Internet Plug-ins:
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
          Default Browser: Version: 537 - SDK 10.9
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              11%          iMovie
               6%          Safari
               1%          fontd
               1%          WindowServer
               0%          hidd
Top Processes by Memory:
          408 MB          iMovie
          179 MB          com.apple.WebKit.WebContent
          147 MB          com.apple.IconServicesAgent
          131 MB          Safari
          82 MB          Finder
Virtual Memory Information:
          3.86 GB          Free RAM
          2.44 GB          Active RAM
          889 MB          Inactive RAM
          846 MB          Wired RAM
          800 MB          Page-ins
          0 B          Page-outs
I have had no software issues with my MacBook prior to this (although I did have water damage that was repaired by Apple). If the problem is an issue with Mavericks/iMovie, I wouldn't be opposed to downgrading back to iMovie '11 or Mountain Lion if that's possible, as long as I can maintain my work on this project. I'm really looking for a 'quick and dirty' fix, as I'm already behind on this video project and need to finish as soon as possible. Thanks!

You may find these articles useful:
http://support.apple.com/kb/PH14176
https://discussions.apple.com/docs/DOC-6162
Ciao.

Maverick and Avid Interface

Similar Messages

Maybe you are looking for