Maverick and Epson Perfection V759 Pro

Just installed maverick and my scanner doesnt work any more. Epson says you should make an update from apple, but there is no update and epson hasn't any new software. What a great performance!
Does anyone know how to make the scanner work?

So...i got my scanner to function by way of someones advice on this thread to go to the system preferences and choose scanner....clicked on scanner in the side panel...clicked on open scanner and it ran the scanner. I would hope the software update will be ready soon. I did not have to add my scanner as it was turned on during this process and showed up automatically. I did not delete my epson software...It didn't seem to make a difference.

Similar Messages

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

You might give VueScan a try. It should work with your scanner. There's a demo version that you can use initially.

Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What shou

Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.

No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton

Epson Perfection V750 Pro Scanner

Can anyone tell me if the Epson Perfection V750 Pro Scanner also scans documents, If not does anyone know of a similar scanner which does?

It scans prints so I think it's just a matter of switching to a "Documents" setting in the software. I have a V700 but have never scanned documents on it. Any cheap flatbed scanner will scan documents so I wouldn't risk scratching your V750 glass or something if you can use something else.

Upgraded to Mavericks and Epson scanner software was quarantined.Powered on the scanner, plugged in the USB, clicked Software Update, and clicked Update for the Epson printer software. Update occurred by I chose "not now" to a dialog and it didn't install

Hi, upgraded to Mavericks and Epson scanner software was quarantined. Powered on the scanner, plugged in the USB, clicked Software Update, and an Epson Printer Software Update appeared in the App Store Updatees area. Clicked Update for the Epson printer software. During the download, I was presented with a dialog asking me if I wanted the software to be automatically installed. I chose the "not now" option and as far as the App Store in concerned the software was installed, but it has not been. Where did this go to and how can I force it to install? Or is there some way to force the App Store to go through the download process again. Many thanks! Joseph

Solution:https://discussions.apple.com/message/23504811#23504811
Epson install: http://www.epson.com/cgi-bin/Store/support/SupportMavericksDetails.jsp?BV_UseBVC ookie=yes&oid=139863#stage1
Epson Image Capture instructions: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 237343&foid=244523&infoType=FAQ

Mavericks and Epson Printer driver problem

What is the issue with the Mavericks to Epson Pro Printer driver upgrade which produces the error message: "filter failure?" The result is no printing. After wading through blogs, chat rooms and both Epson and Apple sites, installing and reinstalling components, I found this cryptic Epson post, under FAQ:
Q: Should I perform Apple's Software Update to get the latest OS X 10.10 printer software for my Epson Pro printer?
A: No. Do not run the software update; the printer software for your product is only available from the Epson support site.
Q: Should I remove previous versions of my Epson Pro printer software before I install the OS X 10.10 printer software?
A: Yes, remove the previous versions of the printer software.
It truly annoys me that this information is not available when we begin to update drivers and operating systems. My Epson Pro 3880 is now printing perfectly from Lightroom as it should.

hi Frank,
I just came across the same problem yesterday trying to get a driver for my Epson Photo R300 printer. It seems that OS 10.3.9 falls between the cracks as far as Epson is concerned - the CD that came with my printer stops at 10.2. and none of the driver downloads on the Epson website exactly fit 10.3.9. But I found a driver nonetheless through a google search and it's working for me now! So far so good anyway. It's at http://www.versiontracker.com/dyn/moreinfo/macosx/15970. Make sure to follow their directions carefully for installing the driver.
Good luck,
emma

OSX Lion and Epson perfection 2450 scanner

After having upgraded to Lion, i cannot run the utility by espon to use my Epson perfection2450 scanner.
Shall i throw the scanner away or there is a way to use it?
Wich program shall i use to scan my pictures?
I'm worried!
thanks

Wayne of America wrote:
I too have an Epson scanner and Epson's scanner software no longer works.
Lion's Preview application allows me to scan (Preview>File>Import from Scanner) with very good options and functionality.
I was in the same boat with my Epson 4180 scanner. Luckily your little trick saved the day and I was able to get something scanned and printed through Preview. I had previously spent a lot of time downloading and installing the updates which did no good, Lion still won't let me use it.
Then I read about opening it through System Preferences and thought I'd found the answer, but that didn't work either. Thanks for your post as it was very helpful to me.

My friend have new Macbook Air with OSX Mavericks and I have Macbook Pro with OSX Mountain Lion, Can I create a bootable maverick in pendrive from macbook air and perform a clean installation/update on my macbook pro with osx mountain lion?

I have late 2012 edition Macbook Pro, I have a internet connection with does not run smoothly It gets disconnected and reconnects Thus I failed everytime when I update my OSX Mountain Lion to Mavericks in App Store. My friend just bought 2013 end Macbook Air whicch have OSX Mavericks pre installed.
I was hoping if I can create a OS X version in pendrive from his laptop and use that to install and thuss also update OS on my Mountain Lion.
Kindly explain me in detail how to perform this.
I have already taken back up of all files and I am ready to total clean my laptop.
And I want to update to Maverick so I can thus further update to upcoming OS X Yosemite.

The Mavericks on the Air is probably machine specific since it came pre-installed, so it wouldn't work on your computer. See if your friend will let you access the App Store, where you can sign in using your Apple ID and download the installer. You can use this free program to copy the installer and update your computer.
Bootable USB Flash Drive – Diskmaker X

Mavericks and Epson printer

I've just bought an Epson WF 7525 to work with my new MacBook Pro (late 2013 model). Due to there being no cd/DVD drive on the laptop and not be able to find any drivers online does anyone have any suggestions on getting the printer up and running?! Thanks.

It's shown as supported:
http://support.apple.com/kb/HT3669
Did you try Software Update?
Or download the entire package here:
http://support.apple.com/kb/DL1398

I recently updated to Mavericks, and now my macbook pro will not boot

Last week I updated my summer 2011 mackbook pro to the Mavericks OS, Now all I get when I turn it on is the grey apple logo and the loading wheel.
Ive tried booting in safe mode and it made no difference.
I left it loading for about 2 hours and it managed to boot up, it then took a further 40 minutes to load after I typed in my password but then I couldn't do anything.
Any help or suggestions? do you think if I to the genius bar they would be able to fix it?

There's really no telling what's wrong with your machine. A trip to your local Apple Store may be warranted as they have the diagnostic testing equipment to find out if you've a hardware or software problem.
Good luck,
Clinton

When I try to move documents from one folder to another, the image of the document gets stuck and essentially freezes my computer. I recently updated to Mavericks and have a macbook pro 13 inch. Any suggestions?

So basically my computer has been freezing a lot since I updated to Mavericks. Is that just an issue with the system or probably with my laptop?
My computer is fairly new( got it in August) and I haven't downloaded much on it. Is Apple planning on releasing an update soon? Also, what should I do to

So how much RAM do you have installed? 4 GB is generally considered a minimum - more is much better (such as 8 GB).
And, how much free space is on your hard drive?

Mavericks AND Epson Stylus Photo R280-driver?

I just removed one EPSON Stylus Photo R280 and plugged in another one of the same model. Can't find the printer when I send something to print, so I deleted the printer from my printer list and then added it back. It wants to go to the Apple server and get the software, which it says is available. When I hit add, it looks and says software is not available. The old printer was runnning printing fine, so obviously there is a driver. How do I get it to recognize it?

What if you try deleting the /Library/Printer/EPSON and the/Library/Caches/Epson/ folders and then reinstalling the updates?

Where can I find updated drivers for and Epson Artisan 800 all-in-one. Epson just refers to the apple update but there is nothing there or at Epson.

The old scanner software is not working after updating to Mavericks and Epson driver downloads refer to apple.

You may have to wait until Epson releases a new driver.

Trouble importing with Epson Perfection 3200 to Photoshop 7.0

Photoshop 7.0 imported the first image very red. Then it wouldn't import saying "Could not complete the import command because of a problem with the aquisition module interface". How can I fix this problem. I am using Windows XP, Photoshop 7.0, and Epson Perfection 3200 Photo, trying to scan a color photo.

Thank you John,
It doesn't let me use Epson Scan at all. The software won't even start. I called Epson today, but it seems that it's a Microsoft problem with the imaging aquisition (?). So I'll spend another day on the phone with them tomorrow.
lmwilliam

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File Import menu?

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File>Import menu?

There was no driver update available (it said my driver was up to date), so I just deleted the scanner and restarted the computer. when it came up, the scanner had already been added again. With great anticipation I tried to import from Photoshop...but no luck (scanner was not visible). I finally ended up calling Epson (had great difficulty in locating a number for support) and they finally told me there is no driver update for OS X 10.10 and I should as a work around use "Image Capture" application. I tried it, and it works quite well.

Maverick and Epson Perfection V759 Pro

Similar Messages

Maybe you are looking for