Maverick and thunderbolt display
I have upgraded to Maveick as soos as it was available.
I have got a MBPr 15" with an Thunderbolt Display.
The big issue I'm facing is that when hthe system go in sleed mode, the display doesn't wake up at all.
I submit the problem to Apple support but they were not able to fix it and sent the problem to Cupertino.
Has anyone the same problem?
Thanks
I'm also experiencing this problem and have to unplug the Thunderbolt cable as well. I've tried adjusting the monitor settings, but nothing seems to help. Apple are you working on a fix?
Similar Messages
-
Macbook pro 17 inch primo 2011 and thunderbolt display crashes
I have a Macbook pro 17 inch primo 2011 and thunderbolt display which has recently started to crash.
Only modifications I have doen lately is I swapped the CD/DVD drive for a harddrive and put in 16 GB of ram
but it has been running for more than a month with these hardware additions without problems.
Today my Macbook has started to crash frequently within 10 min to 1 hour after plugging in my thunderbolt display.
I tried to check CPU heat, change RAM but it keps crashing.
When it crashes it either gives me a blue screen, a black screen or a distorts everythings and freeze up.
When rebooting I have to press Command-Option-P-R to clear NVRAM / PRAM.
I found a few support threads from people having similar problems so I started to disconnect the thunderbolt display
and without plugging it in my laptop works fine.
I have done a SMC reset also but that has not resolved my issue.
Below is the crash report and if anybody has any suggestions what to do to resolve this please let me know
My thunderbolt display was purchased in late 2011
If this is not solveable what options do I have ?
Thanks !
Interval Since Last Panic Report: 2527129 sec
Panics Since Last Report: 6
Anonymous UUID: 5309BD58-3CBB-321E-545E-6EE6BED7E0E2
Tue Feb 5 17:02:21 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code: 0x0400
Model specific error code: 0x0080
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code: 0x0400
Model specific error code: 0x0080
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: no valid machine-check state
Processor 3: no valid machine-check state
Processor 4: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code: 0x0400
Model specific error code: 0x0080
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code: 0x0400
Model specific error code: 0x0080
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: no valid machine-check state
Processor 7: no valid machine-check state
panic(cpu 0 caller 0xffffff80048b83c9): "Machine Check at 0xffffff7f85769a95, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010cd0e30c, CR3: 0x00000000072b4000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff802516f800, RBX: 0xffffff802516f800, RCX: 0xffffff80253ab800, RDX: 0x0000000000000001\n" "RSP: 0xffffff8207ad3e90, RBP: 0xffffff8207ad3ec0, RSI: 0xffffff8207ad3edf, RDI: 0xffffff802520e000\n" "R8: 0xffffff8004ebec60, R9: 0x7fffffffffffff00, R10: 0xffffff8004ebdc20, R11: 0x0000000000000201\n" "R12: 0xffffff80253ab800, R13: 0xffffff81d60d2000, R14: 0xffffff8207ad3edf, R15: 0xffffff802520e000\n" "RFL: 0x0000000000010282, RIP: 0xffffff7f85769a95, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/trap_native.c: 280
Backtrace (CPU 0), Frame : Return Address
0xffffff800470bd20 : 0xffffff800481d626
0xffffff800470bd90 : 0xffffff80048b83c9
0xffffff800470bf00 : 0xffffff80048cedbf
0xffffff8207ad3ec0 : 0xffffff7f856d75b4
0xffffff8207ad3ef0 : 0xffffff8004c472a8
0xffffff8207ad3f30 : 0xffffff8004c45daa
0xffffff8207ad3f80 : 0xffffff8004c45ed9
0xffffff8207ad3fb0 : 0xffffff80048b26b7
Kernel Extensions in backtrace:
com.apple.driver.AirPort.Brcm4331(602.15.22)[5BDCA43F-AD42-3F05-BCCF-BC364D17E1 5F]@0xffffff7f856ca000->0xffffff7f858bbfff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f84e72000
dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8565e000
dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f85015000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 6197670207287
last loaded kext at 6133447331639: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f86cb5000, size 16384)
last unloaded kext at 5379727445407: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f86cb2000, size 12288)
loaded kexts:
com.apple.driver.AppleUSBCDC 4.1.22
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.afpfs 10.0
com.apple.nke.asp_tcp 7.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.filesystems.ntfs 3.10
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.CoreStorage 274.7
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.I
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.70f5
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: ST750LX003-1AC154, 750,16 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0246, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc51b, 0xfd130000 / 5
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
FireWire Device: My Book 111D, WD, 800mbit_speedThe other day I got the blue screen, the fan going on high, and then when I disconnect my thunderbolt connection from my macbook pro - i get a shutdown.
Today I got flickering followed by the fan on high and then again I disconneced my thunderbolt cable and after a minute or two a shudown.
This never happened before. Actually I was suprised to hear about a firmware update for flickering since that's never happened to me but since updating I now get the flicker.
Any ideas?? Any help would be greatly appreciated as this is my work labtop. -
MBPr Windows and Thunderbolt Display
Hi there,
I am trying to have my MBPr and Thunderbolt Display working under bootcamp with Windows 8. All the peripherals attached to the TBD are working fine but the display remains black/off. I am pretty sure that a solution exists but can't find the right. I've tried and under Windows 7 behavior still the same, whereas under MacOSx TBD display works fine.
Thanks for you support !
RVI made the usb stick back when I installed windows 7 that made my imacs amd gpu see the monitor connected as it did in osx and in the same was as any other windows computer with a connected extra screen
(so I turn it on in windows display settings and maybe the amd catalyst software i forget)
when I upgraded to win8 it just used the win7 driver and it still worked fine
same when I later got te official win8 drivers from apple -
MBP Retina and Thunderbolt Display color correction
What are my options regarding color correction for a new 13" Retina MBP and Thunderbolt display using Spyder color calibration system, or equivalent? Really important I nail that down before purchasing.
Thanks!
TomDisable GPU drawing in Photoshop's preferences, and let Apple know about their video driver problems.
-
Windows 7 and Thunderbolt Display
I have installed BootCamp using the reccommended method, a USB Drive and an ISO. BootCamp installed it's drivers at the end of the initial Win7 install and all seem to be running ok..BUT when I hook up an Apple "Thunderbolt Display", I get a black screen on theTB display while my MBP13Retina is just fine. All the other ports and audio that the TB Display supports seem to work just fine, so what happened to the Thunderbolt Display video driver???? I see others have similar problems but is Apple working on this issue? By the way, the TB display works just fine in MAC OSX 10.9 Mavericks. So, where is the TB Display driver for Win7? Inquiring minds, want to know...
I'm beginning to believe that this all started after upgrading to OSX 10.9 Mavericks. Apple need to update their BootCamp drivers to recognize the Thunderbolt display. Till then, It will be hit, and probably miss whether anyone can get it to work using Win7 Bootcamp. I have heard others are having the same problem with Win 8.x as well.
C'mon Apple, fix this thing..I want to use your display in Win7 as well as OSX !!! -
How can I run Macbook Pro screen and Thunderbolt display at same time with different programs?
I am running a Macbook Pro with Mavericks and using an Apple Thunderbolt display. I would like to run 2 different programs on the 2 screens at the same time. Is this possible?
Select Help from the Finder's Help menu and search for "mission control."
Mac Basics- Mission Control -
Citrix receiver on MBP and thunderbolt display get stalled due to screen resolution
Running citrix apps on MBP together with Thunderbolt display. Citrix app will launch but will not operate as is gets resolution error message. Also after upgrading to Mavericks launching the Citrix app only work 1 out of 3 time (not sure at all of the reason it is not always not working).
I have the latest Citrix receiver version 11.8.2 - Java 7-45 also up to date.
Anyone seen similar issue and got it resolved ?I am having a similar issue where I can log in to our server but once citrix viewer opens i get a black screen and thats it. No resolution errors though. Before the Mavericks update all worked just fine.
I have a MBP, citrix receiver 11.8.2 and java updated as well. -
MacBook Pro Retina and Thunderbolt display
Hi all,
I noticed a for me new strange behavior when running my new TBD on my new MBPR. Running Mountain Lion.
When the lid is closed, that is when the MBPR's screen is closed and I use the TBD as an external display it only works when I use the TBD's power supply or the Mag Safe dito, do i disconnect the power from the MBPR the screen geas black... ok , that is as described in the manual. But....
..in the same scernario with no external power to the MBPR... if I open the MBPR, that is pull up the MBPR's screen they both spring to life anf can be used again???
What's the logic about this?
Please tell me the relevance why this is possible?
Regards
/CekariWelcome to Apple Support Communities
Open System Information (in /Applications/Utilities) without the Thunderbolt Display plugged in, and choose Thunderbolt in the sidebar. What does System Information say? Then, try with the Thunderbolt Display plugged in, and tell me the results.
Also, reset the SMC > http://support.apple.com/kb/HT3964 And do a PRAM reset > http://support.apple.com/kb/HT1379 -
When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac. I was hoping that both screens would become secondaries for the MacBook Pro. Does anyone know how I should proceed? I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference. And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.
Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
High performance on display.
Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port. -
Macbook pro and Thunderbolt display on battery power no go.
I use my macbook pro mainly on my desk with the thunderbolt display and its lid closed. While having the power adapter connected to the macbook everything works fine. When I disconnect the power adaptor and try to wake up the computer it comes to life for a few seconds and then goes back to sleep for good. I cannot use the thunderbolt display while having the macbook on battery power. That causes the issue of the battery not discharging which I am aware is pretty bad. Any advice is welcome. Thanks.
I kind of figured this out. The reason I wasn't satisfied was that without the power adaptor when you hit a button on the keyboard the monitor actually wakes up the computer, works fine for a few seconds and then puts the computer to sleep. That kind of proves that it does work, technically at least. The problem is going into sleep mode afterwards.
Anyway i guess it just doesnt work. Thanks.
ps. If there is a way of discharging the battery with software while the power adaptor was still on, would be great help. -
IMac and Thunderbolt display connectivity
Hello everybody,
Several days ago I've bought new Thunderbold 27' display and connected it as a second screen to my iMac. Video works fine but I've just discovered that all ports of that display are not functioning, i.e. USB ports are not working, and I can't see its camera and speakers from my iMac.
Is it possible somehow to get it working? Especially USB would be very helpful.
Thank you.http://support.apple.com/kb/DL1451
I found this update on apple - but can't use it as I have 10.7.3 version of osX.
My data for thunderbolt display:
Thunderbolt Display:
Vendor Name: Apple, Inc.
Device Name: Thunderbolt Display
Vendor ID: 0x1
Device ID: 0x8002
Device Revision: 0x1
UID: 0x0001000100170ED0
Firmware Version: 22.2
Port:
Status: Connected
Link Status: 2/1
Port Micro Firmware Version: 0.0.21
Cable Micro Firmware Version: 0.1.18
Port:
Status: No devices connected
Link Status: 7
Super Port Micro Firmware Version: 0.0.21
Which version of firmare do you have?
Thank you -
Connection between Mac book pro and thunderbolt Display
When im connecting my mac book pro to the thunderbolt display ,it keep disconnecting from the internet.What i need to do with connection? Please guide me ,what i need to do when im connecting thunderbolt display to my macbook pro and wifi will work?
Bluetooth paring for file transfer is not supported on iPads.
You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection. -
External HD and Thunderbolt display
I have the THunderbolt Display with Macbook air and I plug my external HD into the thudnerbolt display. Before unplugging the macbook from the thunderbolt display I always undock it. This leads to it shutting off as it runs directly from USB power. However as soon as I unplug my macbook from the monitor, the monitor decides to power up the external HD and it is always on now. Is that normal. Is it good for my HD to be running constantly , is there any workaround besides unplugging it to get it to stay off? Thanks
Connect one Thunderbolt port of the drive to the Thunderbolt port on the computer. Plug the MiniDisplay Port to DVI adapter into the other Thunderbolt port on the drive. Connect the display to the Mini DisplayPort adapter.
If the display uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will also need a DVI to ADC adapter.
<http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2> -
What's the deal with DVI and Thunderbolt displays?
I have up and until now only ever had a MacBook, I planned on getting an iMac desktop but that didn't work out. However, now I am set on getting a Mini, but I remember there was a lot of comotion with the display connector and was hoping someone could guide me on that. I am looking to get a second hand late 2012 Mini, 2.3GHz and 16GB RAM.
I know there are Thunderbolt displays and DVI ones and converters and all that but what is the issue? Which one should I get?
Thanks in advance, it was one problem I thought I wouldn't have to worry about.All I can say is that I have a TB display with my Mac Mini (late 2012) and it works great. The Mini has a TB port so works with the display perfectly. If you do not want a display that has speakers, camera, mic and ports on the back then you could get a less expensive non Apple monitor but I see some users have display issues depending on the specific monitor being used.. I will others comment on that.
-
What is the best way to clean the display on an rMBP and Thunderbolt display?
Can I use a damp cloth to clean my display on an rMBP and a Thunderbolt display, or should it be a dry soft cloth? My displays are in desparate need of cleaning.
This is what I now use:
http://www.officeworld.com/Worlds-Biggest-Selection/DRACB702288/13Q1/?gclid=COjp r8rOj7kCFVNo7Aode3EAxg
I discovered it in the supermarket. I dampen a small microfiber cloth (6x6) with the Windex and wipe the display. Then I use a large microfiber cloth (12x15) to dry it. Excellent results.
NOTE THIS IS NOT THE CONVETIONAL WINDEX CLEANER.
Ciao.
Maybe you are looking for
-
Application coding and clustering
We are going to develop a web system using iPlanet as web server running http and jsp, weblogic as application server running Java bean RMI inbetween. We have to decide whether to run the app server tire in one box or two(clustered). The idea of havi
-
basically the question is the same as the title of the discussion. double sided printing option is grey and unselectable. i can't figure out if it can be changed to on in the presets etc. would appreciate any help. i am using maverick and the brother
-
LaunchPad WEBI error IES 10901
Hello gurus, I've a report created on web intelligence rich client, and on rich client it works perfectly. After this I publicate this report to CMS, but when I try to run on it throws me an error "COM Provider CLSID not specified or erroneous" (IES
-
NAC agent-multiple antivirus version
Hi, customer has two version of McAfee antivirus. What I need is - user get the same role when login to PC with version X or PC with version Y. Is it possible to create AV install rule with OR logic? Something like if on PC is installed version X OR
-
Apple ethernet thunderbolt vs usb adapter
Which one is faster?? which one should i get??