Maverick changed alternate display for keynote, works in powerpoint?

My alternate display (projector) does not show the presentation, it ends up on top of the presenters information.
How do I get my computer to move the presentation back over to where it belongs.
It only happened when I first used Mavericks?  and I know Pro Presenter 5.0 warned everyone not to move to Mavericks because of a presenter issue until they could get it figured out.  But I am not reading about very many others having any kind of similar issue!

Hi,
I just bought a Keyspan (PR-US2) presentation remote.
I have used it a few times and found it to be reliable and easy to use. It meets your request to be "small" and it contains a laser pointer.
Works with both Mac and Windows based computers.
GS KLIVANS

Similar Messages

  • Change my display for a matte or anti-glare one

    Hello.
    I've got a new G580 laptop, but I found really annoying and unuseful the glare screen.
    I've tried to put over a protector film, but it's even worse because it makes some bubbles in between the film and the display.
    so, is it possible to change my display for a matte or anti-glare one? is there any other solution?
    Thanks.

    Hi Akronix,
    Welcome to Lenovo Community!
    I’m sorry to hear about the situation and the display cannot be replaced by other type of displays and the only available option is to use a protector film, I suggest you to get the protector film on the Laptop by an expert to avoid bubbles on the screen.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Bug? Error when using Alternate Display for a preso with Build transitions.

    I was working on a preso and Alternate Display worked fine for a while when I'd play the presentation. Then I added some Build transitions and when I tried to play the presentation, I started getting this error:
    *Keynote cannot play your slideshow because an error occurred.*
    I restarted Keynote and created a new presentation. Alternate Display worked fine when I just had a couple of plain test slides. Then I added a Build to a set of bullet points and started getting the error again.
    Is this a known bug? Any way to fix it? Is it caused by something else?
    System Version: Mac OS X 10.6.4 (10F569)
    Chipset Model: NVIDIA GeForce GT 330M
    Model Name: MacBook Pro
    Total Number Of Cores: 2
    L2 Cache (per core): 256 KB
    L3 Cache: 3 MB
    Memory: 4 GB

    Certainly not a known KN bug, but might be an expression of the NVIDIA problem referred to here: <http://www.macrumors.com/2010/09/29/nvidia-class-action-settlement-for-macbook -pro-owners/>. Given your expertise and your hardware, that'd be my first guess. Barring that, you have to line up the usual suspects: corrupt pref file, corrupted app, etc. Have you been having any other problems/strange behavior either with KN, with other apps, or with your Mac generally? What, if any, software maintenance/repair have you tried/do you do routinely?

  • Changing iBook display for external monitor

    does anyone know how to change the screen resolution past 1024x768 on an iBook G4 12 inch? I'd like to set it at 1280x1064 on my 19 inch monitor, but its not an option in the displays preference page. Does anyone know a way around this?

    There are a few ways the display resolutions and/or settings can be
    changed; you can use custom controls offered by some applications
    and there also are unsupported "hacks" that can add features or
    resolutions not originally intended by Apple for certain models.
    So, since some choices (if failure results) may void your warranty,
    some people are reluctant to use an unsupported feature hack.
    That said, one of the better sites with a product that seems to be
    well crafted (which I have not tried) is SwitchRes X
    Another less polished and maybe more on the edge (?) is one that
    adds the ability to expand the desktop between two displays and
    not just mirror; such as the PowerBook supports. That may work,
    or it may not. Some hacks may be bad on the video card.
    Extended Desktop
    With the second display attached to the iBook, you may be able
    to use one of these utilities listed to add features and resolutions.

  • Changing Colour Display for Temperatur​e Distributi​on

    Hi everyone,
    I am currently involved in reading a series of temperatures along a length of pipe as part of an experiment.  I thought it would be a nice touch for my VI to have a diagram of the pipe which changes colour to show the temperature distribution along it.
    I have attached my initial solution.  I would have posted a VI snippet but this seemed to effect the my references in the property nodes.  
    Issues
    The code 'works' in the sense that the foreground colour of each tab control will change based on the value of the corresponding temperature.
    The solution does not scale well.  I need 'n-1' case structures for 'n' colours/temperatures.  I considered using an enum input to a single case structure, but was not sure how to compare this to the for loop index.
    Unsure whether changing a tab control background is the most efficient way to do this.  Not sure of an alternative.
    I am looking for suggestions as to how to do this more efficiently as there will be up to 16 temperatures in the final system.
    Many thanks in advance,
    Pete
    Regards,
    Peter D
    Attachments:
    Temperature Display.vi ‏16 KB

    Tabs are probably the weirdest choice here. Why not use e.g. a simple colorbox or button?
    In any case, try to learn about autoindexing, it will dramatically simplify your code (see attached in yellow box).
    I probably would use an array of clusters, each containing a colorbox and a numeric with transparent background. Modify as needed. (see attached in green box).
    Of course you probably would want to make it a it prettier than my draft.
    For a larger ramp, I would use a plain array of flat colorboxes. Now simply index into a color ramp to generate it according to your temperatures.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    Temperature DisplayMOD.vi ‏18 KB

  • Macbook Pro 13" with Retina Display for Photography work

    Hi All,
    I'm looking at buying a Macbook Pro 13" with Retina Display with the following specs.
    2.6GHz dual-core Intel Core i5
    Turbo Boost up to 3.1GHz
    8GB 1600MHz memory
    256GB PCIe-based flash storage
    Intel Iris Graphics
    Built-in battery (9 hours)
    I need to use this mainly to edit RAW images as I'm a photographer and will be using this whilst onsite during a photoshoot. I have been advised that due to the graphics card, when using software like Photoshop, the laptop might slow down as it won't be able to handle the large files.
    The only one that has a good graphics card is the MacBook Pro 15-inch: 2.5GHz with Retina display - with the following specs.
    2.5GHz quad-core Intel Core i7
    Turbo Boost up to 3.7GHz
    16GB 1600MHz memory
    512GB PCIe-based flash storage
    Intel Iris Pro Graphics
    NVIDIA GeForce GT 750M with 2GB
    My issue with this model is the size and most of all the price. it costs 1000 more than the 13". Have any of you had the chance to use photoshop on the 13" version and how did you find it?
    Thanks

    Go step by step and test.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405
    If this does not help, you have to take the computer to the Apple store to
    have it checked out.
    Best.

  • Can't get a full screen display for keynote or movies.

    The deck or movie only displays a smaller section on the center of the screen with a thick black border. It used to display full screen, I don't know when it changed.

    Hi Mary,
    I don't remember those arrows in 10.6, only 10.7 & up!?
    I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved  all the way to the left.  Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
    By wuzradioman here...
    https://discussions.apple.com/thread/4218928?start=0&tstart=0

  • How do I use my 2011 27" iMac as an external display for a pc?

    I just bought a 27" imac for my home, and was also planning on using it as an external display for my work Dell Laptop running Windows 7.
    The Dell laptop has a displayport output, so I was planning on getting a displayport <-> minidisplayport cable, and using the iMac in target display mode.
    I would simply plug the minidisplay end of the cable into one of the iMac's 2 Thunderbolt ports. Seemed fairly simple.
    Except now it seems from what I have been reading that 2011 iMacs DO NOT WORK in target display mode unless they are connected to another Thunderbolt source. This leads to me two questions.
    1. Can anyone confirm or deny this? If this is true, does that mean I cannot plug my Dell's displayport into the iMac's Thunderbolt port as I described above?
    2. If #1 is true, is there any other option? Are there any adapters that I can use to turn my Dell into a Thunderbolt source for display purposes?
    If I can't resolve this I will have to return the iMac
    Thanks very much.
    David

    David,
    Sorry you can't use the 2011 iMac as an external display to your PC. The feature you are referring to is called Target Display Mode and works on 2009 & 2010 27" iMacs. The 2011 machines use Thunderbolt as you know however they do support external displays that are not Thunderbolt displays. So for example if you wanted 2 displays on the iMac you can easily do that with either Mini Display port to DVI or MDP to VGA or even HDMI. MDP is the same size as Thunderbolt and this will work fine to drive a display, TV or even a projector.
    I'd recommend reading Apple's explanations at Target Display Mode 2009 & 2010 iMacs & Target Display Mode Mid 2011 iMacs.
    Using a Mac as an external display for a Windows machine to me seems like a horrible waste of a Mac. Why not enjoy the iMac and if anything run Windows on it and get rid of the PC?

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Hyperlink not working in presentation mode when using alternate display

    Made hyperlinks to jump from slide x to slide y
    That worked fine when testing in presentation mode
    When the same file is played using a beamer as alternate display the hyperlinks are not recognised: clicking will start the next build of the presentation

    Is there anybody who successfully used a hyperlink to jump from slide A to slide Y? (and when using the beamer as an alternate display, using the macbook pro screen for the presentation notes)
    If so, I can try to find out what I do wrong, otherwise it might be a bug in Keynote'08
    thanks for your attention in this matter!!

  • Air Display for Windows 7 not working

    I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
    Both my laptop and iPad are connected to the same WiFi.
    Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • How to change the display name for Gmail aliases?

    I have a Gmail account with multiple aliases. They look like this:
    Joe User <[email protected]> (Primary)
    Support <[email protected]> (Alias)
    Billing <[email protected]> (Alias)
    Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
    I have to imagine I can do this. Can someone help me out?
    Regards,
    Dave

    Anyone came here, refer to this post.
    http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

  • I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

    I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
    Can anyone help me resolve this problem?

    Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

  • How to change colors for record working time calendar

    Hi,
    I would like to change the colors in the calendar displayed in record working time based on some conditions.
    How do i do that is there any BADI associated with that
    Thanks
    Bala Duvvuri

    Hi Bala ,
    Yes its possible to change that .
    You need to implement BADI for this ..
    BADI name : "PT_ABS_REQ"
    In the BADI "PT_ABS_REQ"   interface "IF_EX_PT_ABS_REQ" you can find the method
    "SET_CALENDAR_COLOR" in that you can set the colure for the Absent type ......
    Adjust Colors of Calendar and Team Calendar
    Functionality
    You can use this method to change the colors in the team calendar.
    In the standard system, the different statuses for requests have different colors. You can use this method to differentiate the colors of requests depending on the following aspects:
    Status of requests (status)
    Action that an employee has executed: new request, delete, change (UIA operation)
    Subtype of absence (SUBTY)
    Full-day or partial-day absence (BEGMT, where BEGMT = 0 signifies a full-day absence)
    Application mode ( mode). You specify the application mode in the Select Employees for the Team Calendar IMG activity.
    Color Display of Status of Leave Requests(COLORS_ACTIVE). You specify this status in the Specify How Leave Is Displayed and Default Values IMG activity.
    Available Colors
    You have a choice of 16 colors. The 16 colors are hard coded, that is, you cannot change them or add other ones.
    The available colors are stored with their RGB value as constants of the CL_PT_REQ_CONST class. Use these constants if you want to change the colors.
    Notes
    If you change the colors in the team calendar, you should also adapt the legend accordingly. You can use the Adjust Legend for Calendar and Team Calendar method to do so.
    Hope this work!!!

  • I want to use my Apple watch to time my patients' vital signs. The face only stays displayed for about 7 seconds. Can I change that?

    I want to use my Apple watch to time my patients' vital signs. The watch face only stays displayed for about 7 seconds, which won't work. Can I change that?

    Linda
    I am glad that bbqdevil's *workaround* will "do the trick"
    Did you give the Timer idea a try yet? It seems to me that you are really needing to know when a certain amount of time has elapsed rather than *time how long you have being taking a reading*. Will you always have your hand free to tap the Watch? If so, why would you need the StopWatch going? - just look again at the sweep second hand on the clock.
    It still remains that one should be able to set the time elapsed before sleep on a Chronograph w/ sweep second WatchFace though. I have searched and searched, to no avail.
    I would suggest Siri, but it seems like many issues with Siri are ongoing and might just add another problem to the mix.
    If I were you, I would Call Apple Support. It is sometimes tricky to get that option in the "breadcrumb" process Apple has instituted, but I was able to test the process before suggesting this:
    Click/Tap > https://getsupport.apple.com/GetproductgroupList.action
    Choose Apple Watch
    Choose "Setup & Usage..."
    Choose "The topic is not listed"
    Enter "set sleep duration" > [Continue]
    (I know this in not exactly right, but the point is to be vague)
    Pick your poison - I would ONLY choose to talk with them on the phone
    Rehearse an "elevator pitch" statement* for the Specialist that you get AND when you get no satisfaction (likely) ASK FOR A SUPERVISOR
    I have NEVER gotten an answer from a Level 1 Specialist - they are reading from a Knowledge Base not unlike all the resources available to us online
    I have ALWAYS gotten satisfaction from a Senior Specialist (sometimes pretty high up the chain - but always)
    Here's a sample "elevator pitch" that I actually sent as Feedback on the Apple Watch User Guide page
    I need to change the duration 'before' the Watch goes to sleep while observing the Chronograph Watch Face.
    I am a healthcare provider. I need to use my Watch to assist me in taking vital signs. On a normal watch, I would start counting pulses or respirations at a 15 second interval on the Analog Chronograph sweep second hand > stop counting at the next 15 sec. interval > multiply X 4 to get rate/minute.
    The Watch goes to sleep after SEVEN (7) seconds !! Therefore I cannot see when 15 seconds has elapsed.  I use both hands regularly in the procedure, so touching the Watch is not an option - or 'raise the Watch' to my viewing position.
    I, and others in the ASC forum have searched for a Setting for the before sleep duration in vain.
    Let us know what you decide.
    ÇÇÇ

Maybe you are looking for