Maverick does not mount flash card USB3 sandisk

a new USB 3 64GB sandisk flash card when connected to my 15 inch Retina that has USB 3 connections.
Anyone with similar problem ?
Problem for aplle to fix ?
Download a USB3 driver ? and from where ?
thank you

Update - I have three Seagate FreeAgent GoFlex external harddrives. The two that I have connected to my Macbook Pro no longer can be read. I took the two and connected to another MacBook Pro but it would not read the drivers either. I took my third drive which I have not connected to my Macbook Pro for several weeks and connected to the other Macbook Pro and it reads it fine.
I downloaded drivers from Seagate but it didn't help. I started my computer in safe mode, HD didn't work. I have another drive containing a duplicate of my internal HD (using Superduper) and booted with the backup drive. It would not open the two drives. I'm taking the HD to a friend who has a G5 using an early Mac OS, 6.0. These two drives contain my video files and I need to retrieve the files.
Conclusion: The Maverick on my computer has corrupted the first two Seagate drives.

Similar Messages

Why does not USB flash card work?

MacBook Pro 13' (late 2011)
OS X Yosemite 10.10
My USB hub does not see any flash card, but it works when I use my iPhone.
What have I done: I tried to open my flash card. Then, I cleaned my flash card with Disk Utility and tried to connect to Mac again. I also tried to use different flash cards. But there was no effect.

Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi

USB Flash Disk does not mount after Leopard Upgrade

I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.

vikas wrote:
I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.
Check to see if your USB Drive has the latest firmware. Leopard tends not to support older firmware.

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

Maxtor OneTouch III does not mount with Firewire

My Maxtor OneTouch III does not mount with Firewire.
I changed both cables, and ports on the drive to try with my 400 port on the MacBook Pro.
The drive will start up, the light will flash, remain steady, flash again. And then just as the Mac finishes booting, the light turns off and it does not mount.
It works just fine with a USB cable. But I bought it so it could be used as a firewire drive.
Other firewire drives work.

Hi Judy,
Has this external HDD ever worked while connected with FireWire? (In other words, did the drive just stop working via FireWire, or is this the first time you've tried to hook it up via FireWire?) Does it work over FireWire on another Mac?
If the answer to those questions is no, it's likely that the firewire ports on the external HDD are bad.

Aperture does not detect CF Card

I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
Any ideas?

Does the card show up in the Finder? I suspect this isn't an Aperture issue.

SD card not mounting in card slot, mounts only with USB card reader

hi all,
I have browsed this forum "Ports and interfaces on the MacBook Pro (2008 and Later)" for a bit and searched for "SD" but did not find any posts directly related to my issue here.
I have a Kingston 512Mb card which mounts in my MacBook Pro only when I insert it in a cardreader inserted in the USB port.
Directly in the memory card slot it does not mount. Other SD cards do mount. I did not yet recognise a pattern in what mounts and does not mount.
I need to mount this specific SD card in the memory slot because bigger, newer SD cards are not accepted by the device I am using the card in (an iRex iLiad).
The Kingston 512Mb SD card is formatted as MS-DOS (FAT16) according to Disk Utility.
Any suggestions on what I could try? Buying other 512Mb cards is not that easy, there is not a lot available and only the ones on this list http://wiki.mobileread.com/wiki/IliadSD_Memorycardslist are supported by the device.
TIA!

Within a year or two, a device that is limited to 512MB and smaller cards — and only certain ones of those — will probably be completely useless. As you've found, no one else is interested in buying such tiny cards any more, and their production is likely to be discontinued very soon.
This does nothing to explain why your card can't be read in the built-in reader, though. One thing to check is the position of the "lock" slider on the card; a small handful of other posters with similar problems have reported that if the slider isn't securely locked or unlocked (I don't recall which), it gets disturbed as the card is inserted, and the card can't be read as a result.
If that doesn't solve the problem for you, just use your USB reader when you have to read that particular card. As you say, your other (presumably larger) cards are all read properly in the built-in reader, so you know the reader works. There may just be a minute manufacturing-tolerance problem with that particular card.

Duel Adapter not mounting p2 card

I purchased a Duel Adapter for my panasonic p2 cards to be able to be read on my macbook pros--one running 10.5.8 and one running 10.5.5. I was having a hard time getting the adapter to mount my p2 card on either laptop until I realized I hadnt installed the P2 drivers. I did so and the duel adapter successfully mounted on my macbook pro running 10.5.5......however, I did the same install on my macbook pro running 10.5.8 and it does not recognize the card/adapter. In my "About this Mac" I see the PCI Cards section says "This computer does not appear to have any PCI cards installed." What is different from my 10.5.5 and my 10.5.8 that the adapter does not mount on the latter? I called Duel Systems to ask for technical support and they said at this point it is an apple issue. any suggestions?

I am having the same problem. I had been using my dual adapter with 10.5.5 and it was working fine, now it is running 10.5.8 and is not recognizing the card at all. nor is my firewire. if anybody has any solutions please let me know.

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

Ipod (3rd gen.) does not mount to iTunes

My ipod (3rd gen.) does not mount on iTunes (using a Mac). When plugged in, it appears on my desktop as if it were a jump drive.
I was planning on re-formatting it with Disk Utility but I'm not sure if this is a good idea. I also realised that the Format is listed as Windows NT File System (NTFS) when I have the disk utility window open. If I need to format with Disk Utility, what format option should i choose? (i.e. Mac OS Exteneded (Journaled), Mac OS Extended etc.)
Thanks in advance!!!

Now when I connect the Ipod to my Mac, it mounts as a Device on iTunes. I want to sync only a few items from my library onto this iPod - when I attempt to do this (by either adding the specific music to the "music" section on the iPod or creating a playlist and using Autofill to fill the iPod), the iPod says that it has Synced but when I disconnect the iPod, there is no music on it. Why?

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

TS3276 How do I open Microsoft word documents in a Email since Maverick does not recognize MS Word?

How do I open a Microsoft Word cocument in a Email since I upgraded to Maverick. Maverick does not recognize MS Word, Excel and Power Point.

MS Office 2008 and 2011 work fine in Mavericks. What version are you using? You can always use a program such as Open Office to open the docs.
Pete

Home DVD goes in, spins, does not mount, and then ejects. It does play on an old Windows PC.

Hi. I have a MacBook and I am able to play purchased DVDs just fine. However when I try to play the home DVDs my brother burned for me on his new MacBook Pro it doesn't work. The DVD goes in, spins, does not mount, and then ejects. It plays on an old Windows PC though. Very strange. Help!

I know your frustration, so happy I still own a PC just so I can burn any DVD I might still need!
I was told at the Apple store to go buy an external l0l
How awesome is THAT ...Yah you just paid an INSANE amount of cash for a CRAP laptop so now go out and spend MORE money on getting an external DVD burner so your expensive laptop can burn/play DVD's
YAY APPLE... wtg at putting out a quality product!
PS so fantastic to see all the responses to your cry for HELP here!

[SOLVED] Gnome does not mount ipod after system upgrade

I did a system upgrade today (2009.12.04) and now gnome does not mount my ipod video (gnome used to mount the ipod without problems before de upgrade).
Here is some information about the system messages:
Last lines of the output of dmesg before plugging the ipod:
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
After plugging it:
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 2 choices
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-4: reset high speed USB device using ehci_hcd and address 3
usb 1-4: reset high speed USB device using ehci_hcd and address 3
usb 1-4: reset high speed USB device using ehci_hcd and address 3
usb 1-4: reset high speed USB device using ehci_hcd and address 3
usb 1-4: reset high speed USB device using ehci_hcd and address 3
scsi 6:0:0:0: Device offlined - not ready after error recovery
usb-storage: device scan complete
The output of the lsusb command:
[miguel@miguel ~]$ lsusb
Bus 002 Device 002: ID 0408:030c Quanta Computer, Inc. HP Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05ac:1209 Apple, Inc. iPod Video
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb shows ipod is in Bus 001
Any help?
Many tks
Last edited by mmf1902 (2009-12-29 04:42:11)

Finally found the problem was the Ipod itself. After a soft reset everything worked again.

Unix Command install updates for 10.9 Mavericks does not work

Unix Command install updates for 10.9 Mavericks does not work
These commands no longer work with 10.9
softwareupdate -i -a
softwareupdate -d
Are there new unix commands for 10.9 to install updates?

Now that Safari 7.0.3 is out there is actually something to update, here is the results:
SYSTEM2 (192.168.1.6)
Software Update Tool
Copyright 2002-2012 Apple Inc.
Finding available software
Downloading Safari
Downloaded Safari
Installing Safari
Done with Safari
Done.
Get Info on the system shows:
Modified: Today 10:15
Version: 7.0.3, Copyright © 2003-2014 Apple Inc.
Regards,
Shawn

Maverick does not mount flash card USB3 sandisk

Similar Messages

Maybe you are looking for