Maverick install is asking for an admin password which I never set up to begin with.

Maverick is asking for an admin password which was never set in the beginning.  I have tried all help suggestions to no avail  Help

I got to the same problem, because I have'nt an idea about my administrator password.
So I did reboot with command + R, then open Terminal, then define an administrator Kennword, then restart with pull down menu.
Restarting and opening the user ...(Systemeinstellung;Benutzer) the new setted password works, it is, it can be used to unlock user administration. But willing to start Maverick.....it does not work.
So at this time no Maverick....
Has any one a clue about what has to be done?

Similar Messages

  • Unable to install "Mavericks" as it asks for my 'Admin Password" and it does not work. Have not used it since I got my iMac in 2008. First upgrade to do so. Any solutions please?

    I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
    I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
    I am running Mountain Lion successfully.
    I have my original disks as supplied and also a Snow Leopard install disk.
    I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
    How can I repair this situation.
    Thank you to all those who respond.

    Thanks for your reply.
    I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
    I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
    I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
    I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
    This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
    I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what.

  • Restoring my new Iphone 5 from my backup. It is asking for an encryption password but i never set one up

    I've backuped my phone and then had it replaced as it was broken.
    Went to retore my new phone Iphone 5 and it is asking for a encryption password. I didn't set one two days ago.
    I have tried my itunes password, the computer password my iphone lock password everything.
    I even looked into my keychains. HELP

    There is no help, if you don't know the encryption password, then sorry you won't be able to use your backup.

  • My brand new Mac ProBook keeps asking for an admin password to download Adobe Flash Player

    My brand new Mac ProBook (OSX Mavericks 10.9.4) keeps asking for an admin password to download Adobe Flash Player and also when I try to set up adding my printer. The problem is that when I initially set up this new laptop--I opted to not have any password upon login. So what is my admin password that it keeps requesting??--that "I" did not create??

    I have heard that Adobe Flash Player and Apple OS & iOS do NOT care much for each other.
    Now half of Youtube videos would NOT play and many websites would NOT show on my Mac computer.
    This is absolutely rediculous!
    Because of the unfair monopoly, I have switched from Microsoft Windows PC to Apple Mac system a few years ago.
    Is it a MUST and worthy for corporations to compete each other by screwing up customers like this?
    What a shame!
    Big things have small beginnings and so do big failures!
    I think I will delay the idea of buying any more OS or iOS products until I can easily watch all the Youtube videos and browse all the websites!

  • I am trying to install vmware fusion and during the install it continues to ask for the admin password to install.

    I am trying to install vmware fusion 5-1.0.2 on osx 10.8.2 and it just keeps asking for the admin passoword for the computer.  I keep putting it in with no luck.  I have installed other programs with no issues.

    If yours is the only user account on the Mac, it will have Admin privileges by default, so just type your password. Provided the installer is legit (i.e., downloaded from VMWare's servers and not some shady place), it needs Admin privileges since it needs to add stuff in the innermost folders of the OS for virtualization to work.
    If your user account does NOT have admin privileges, you will need to have someone who does install Fusion for you. No way around this.

  • It asking for a admin password

    so looking at do the update to OSX MAverick download it and go to install it and ask for a administrater  password  but i cant remember every settting one so how do i find out where to reset it or find out where i could find it 

    Your Admin Password is what is used when you say Lock your computer or Re-Boot it..
    To Find it you Go to-->System Pereference>User&Groups.

  • Have down loaded Maverick OS two days ago. to activate it asked for my Administrator password which I could not remember. I changed my Password. Now where do I find the Mavereick OS on my computer as i can now give my Administrator password.

    Have down loaded Maverick two days ago. To activate it asked for my Administrator ID which I had forgotten.
    Now i have managed to change my ID. Now to instal Maverick I cannot find it on my computer. If I down load it again it will use my Internet plans %gb mor from out provider. So How do i activate my down loaded Maverick OS.

    No It did not help. After Down loading it asked for my administrator ID which I could not give as I had forgotten.
    Now I changed my administrator Id and remember it. But now I cannot find the same anywhere on my laptop. it is not in application as i could not instal it. so where is it. If I down load it again Iwill b using 5GB of my internet again from my plan of 30Gb which my provider will minus again. In short I will b using 10gb of my plan for a 5gb Maverick.

  • I changed my i tunes username and password a while ago, but there are still remnants of the old one appearing. I now want to wipe my iPhone, but can't as it is logging me in with my old username, and asking for the old password, which i can't remember.

    I changed my itunes username and password a while ago, but it still sometimes keeps popping up. I now want to erase my iphone, but i can't because it is asking me for my old password, which i can't remember. My old user name was an email address, however i no longer have the email address!! Help please community.

    https://iforgot.apple.com/
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • Got a new iPad and set up to sync with iCloud and now asking for password which I never set. How do I get on device if I don't know what it thinks password is?

    Help.  I just got a new iPad 2 and set up sync with iCloud and no password.  Now asking for a password and I never set one up.  What password does it want: iTunes, iPhone (no real password there either).  Tried as many passwords as I could think with the iPad locking me out since I don't have the password!  Would like to use the iPad but can't get on to try it.
    Thanks.
    Desparate

    So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
    Yes...  sorry.
    In the future, if need be, you can re download your purchases for free  >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Good rule of thumb is to back up your purchases regardless  >  Mac App Store: Backing up your app purchases

  • My hp 2450 is asking for a password which I never set up

    I am trying to set up my printers wifi and its asking for a password but i never set one up and don't know where I would find it

    Again, is the printer finding your routers SSID? Input the password for your network and connect. You need to be much more detailed on your setup and troubleshooting steps.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do I add a password where I never had one? All I can find is change password and that asks for an old password which I do not have.

    How do I add a password as user and administrator where I never had one? All I can find is change a password which asks for an old password to be entered and I do not have an old password.

    Just leave the old password field empty and enter the new password

  • Startup asks for Username and Password - which we don't have

    Our iMac G4 hard disk has failed and we've re-installed the Mac OX 4 system into our external drive. After installation the startup process asks for a username and password. We have never had to use a username and password on this computer and have no way of accessing what they could be. This means we cannot go any further and have to either shutdown or restart the computer (which just takes us back to username and password again). How do we circumvent this username and password?

    It is presumably asking you to create a username and password so that it can make an admin account with them. There has to be at least one admin account: once you've got it up and running you can set it to auto-log in so that you don't need to enter the details every time you boot up. The previous installation must have had an admin account with a username and password, it's just that if it was set to auto-log-in you would only need it when installing new software. The new account doesn't have to have the same name as the old one, just invent something convenient: the username should be one word and lower-case.

  • I have a new Mac. I turned it off and it is asking for my password which I never set up yet

    I turned off my new Mac and when I turned it back on it is now asking for my password which I had not set up yet. I have tried every password I can think of, nothing works so now I cannot use my Mac. Also, a password is set for Administrator but I did not set one so I cannot change it.

    Welcome,
    First you say "new Mac" which one exactly. Year and size? If you didn't set up a password that prompt might just be blank. How did you set it up originally?

  • My iTouch has apps that are ready to upgrade. I'm asked for my iTunes password which I enter but it tells me it's the wrong password. It isn't because I can login to iTunes with it. I also have another iTunes account but app upgrade defaults to one a/c.

    My iTouch has several apps ready for upgrade. When I ask it to upgrade it prompts me for my iTunes password relating to one of my iTunes accounts but when I type it in it tells me it's the wrong password even though it isn't. Any ideas out there?

    From your discussion it sounds like the app you want to update were purchased under a different iTunes account than the iPod is current signed into.  Go to Settings>Store and sign out of the existing iTunes account and sign into the account that purchased the apps.  You can't change the account when the message identifying the signed-in account and asking for the password.

  • My iPad won't open and keeps asking for a pass code, which I never installed?

    My iPad mini won't open, it would appear to have a pass code which I never installed. This was the first time I charged it up and I'm confused. Can anyone help please?

    What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

Maybe you are looking for

  • Printing a Special Message in ALV Report

    Hi, I have a requirement to print a special message in an ALV report. Customer wants to see this single line message between Report Header and ALV grid. This is a dynamic message to be displayed based on the values in the ALV table. Please suggest me

  • ERROR IN BDC SESSION BACK GROUND ( USING PP03 T.CODE)

    Hi Experts, When i am executing the session ( pp03 T.Code) ,it is working fine in fore ground as well as in display errors mode. But it is not working in back ground mode. it is raising the exception ( cntl-system-error). I used flat file which is in

  • HP Color laserjet CP3505n loses network connections

    My HP Color Laserjet CP3505n used to print flawlessly from 2 computers wired on my network. Now sometimes it says connected, but hangs up when trying to print. Or sometimes it says OFFLINE. Either way, I end up with a queue waiting to print and nothi

  • NFS: server reboot - client problem with "file handle" - no unmont

    Hello, when I restart a NFS-server and a client has a NFS-share on it still mounted, that NFS-share becomes unusable on the client: everything causes the client complain about an old "file handle", even trying to unmount that share! So my question is

  • Firefox not connecting to Addon Website for Updates

    Firefox says it is unable to connect to Mozilla Addon site when I try to update my addons. Likewise, it gives the same error when I try to update addons directly from their page on the Firefox Addon Website.