Maverick OS and Logic 9.1.8

Has anyone using Maverick OS, have a problem with Logic 9.1.8 working within Maverick?
Thank you,
EAR

EAR ~ This is just a tip...
You can edit your post within 15 minutes. To edit your initial post of a thread, click on the Edit post link in the Actions section at upper right. To edit your subsequent posts of a thread, click on the Edit link at the bottom of the particular post you want to edit. Either way, when done editing, click the blue Update button.
And by the way, it's called OS X Mavericks.

Similar Messages

  • Can you run Logic Pro 8 and Logic Pro X on the same machine?

    Hello all!
    Congratulations to us on the release of the new Logic Pro!
    I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!).  I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
    As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
    I am planning my Logic Pro and Mac OS migrations!  Thanks!!

    Try here:
    https://discussions.apple.com/community/professional_applications/logic_pro
    This forum is FCP X.
    Al

  • Logical Switch and Logical Network

    Hello All...................I have Hyper-V Failover Cluster based on 5 Hosts and I am managing it with VMM 2012 R2. I was slightly confused with respect to Logical Network and Logical Switch in the Fabric Settings.  I would appreciate if someone could
    shed a little light on the difference between them.  Also, while there is a Logical Network defined by default (Name of the Virtual Switch of Hosts), there is nothing defined in the Logical Switch.  Which one is mandatory? Logical Network or Logical
    Switch? Can I delete the default Logical Network?

    Hi Nick,
    Please find below link for the whitepaper mentioned by Kristian.
    https://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
    For a complete reference please refer below series. This covers VMM 2012 SP1 but should be fine with R2 as well.
    http://blogs.technet.com/b/scvmm/archive/2013/01/08/virtual-networking-in-vmm-2012-sp1.aspx
    Logical Network is defined for easier management and used in Network Virtualization where as Logical switch is used to configure networking in multiple Hosts rather than creating individual Virtual switches in each host. If it were me I'll leave the
    default logical network as there is no harm of doing nothing in it.
    I hope this will shed some light into your situation.
    Thanks,
    Janaka
    Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

  • I updated to Mavericks yesterday and my computer is exceedingly slow and the notes that were in my email have disappeared. How can I get them back??

    I updated to Mavericks yesterday and since then, my computer has been exceedingly slow!
    Windows and applications take forever to open. I get the spinning pinwheel of death every few minutes.
    The notes that were in the email app. are gone! where are they?!

    The notes are in the Notes application. Restart the computer and see whether there's an improvement in performance.

  • Problems with Presonus Firestudio and Logic

    I am having problems with compatability with my brand new Presonus Firestudio recording interface and Logic pro 8. I am new to logic but not to home recording, and i cant understand what might be the problem. When i use the firestudio with garageband it works easily. In the garageband sound preferences there are input AND output channels that the user can define. (i.e. you can set your input channels to come from the firestudio while the output channels go to the computer speakers or headphone jacks or whatever you define it as).
    From what i have seen in logic, there is only one option for your audio settings. when in preferences and under audio, there is a "device" setting in which you can define your audio device. Wheather this is input AND output for the program, i do not know. but the problem i am experiencing is that whenever i choose the firepod as the input device, no sound from logic will play from the speakers whatsoever. My first thought was that maybe ouput was going straight to the firestudio, but after plugging headphones into it this also did not work. Has anyone had success getting their firestudio to work in logic? if so let me know what settings you had to use, and how you got to moniter your input from from the firestudio via your computer.
    p.s.
    another WIERD problem i have run into, is that if i shut off the firestudio while logic is open, alot of times it will shut down my whole computer. i have never heard of this happening. what am i doing wrong?
    thanks!

    SydSeale wrote:
    The new beta drivers are now here...
    http://www.presonus.com/forums/showthread.php?t=3957
    ah, I was hoping to find my solution here, but alas the thread is gone...
    I recently bought a Macbook running Leopard, and am having difficulties with my PreSonus Firestudio Project thru Logic and Mainstage. I can get audio input and output just fine, but there's a ton of distortion/crackle. Kickstarting the sample rate seems to clear it up for a minute or two, but then the crackle comes back. The recorded tracks sound clean if I unplug the Firestudio, so apparently it's only in the monitoring stage?
    On the PreSonus board, they're claiming it's Apple who needs to update drivers for Leopard; PreSonus says the "Firestudio Project is Leopard compatible."
    still searching for some answers...

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

    I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
    <E-mail Edited by Host>

    Hi John,
    That's often a sign of a bsad Capacitor in the Power Supply, but...
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • Best Interface for GarageBand and Logic?

    I have been using GB and Logic Pro extensively for the past 2 years. I would now like to know what the best interface would be to use in order to use 8 mics at one time. Thanks for your help.

    Only around six grand....but if you want da best...this is certainly in that stratosphere...

  • Hard drive crashed on my MacBook pro and had to replace drive and logic board.  When I connect my iPhone and try to sync I get a dialog box stating iPhone is synced with another iTunes library, erase and sync?  How do I sync with iTunes without erasing?

    Hard drive crashed and had to replace drive and logic board on my MacBook pro.  After Install tried to sync with my iPhone and a dialog box pops up stating "this iPhone synced with another iTunes library, erase and sync?".  I checked the manually manage music and videos box because I don't want all my wife's pics and music on my iPhone.  How do I Sync without erasing what I have on my iPhone???

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

    My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done?  Why did this happen, the overloading of the Time Machine?

    Why has the TimeMachine drive run out of space?
    With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
    Will you have this problem with a 3TB drive?
    I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up  more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
    Moving Forward
    Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

  • My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

    my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

    Hi Ronald ...
    Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space.
    And make sure the OS X software is up to date.
    Click the Apple  top left in your screen.
    From the drop down menu click:   Software Update
    If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

  • My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

    My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

    1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
    2)  Use one of the following methods to install FCE 3.5 into Mavericks:
    a)  Pacifist:  http://www.charlessoft.com/
    b)  Jeremy Johnstone's Terminal method:  http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
    Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function.  FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

  • What are the physical topology and logical topology in sharepoint

    Hi
    what are the physical topology  and logical topology in sharepoint
    how to define  the physical topology  and logical topology in
    sharepoint
    adil

    Here are the example topologies for SharePoint:
    Traditional - 
    http://www.microsoft.com/en-us/download/details.aspx?id=30377
    Streamlined - 
    http://www.microsoft.com/en-us/download/details.aspx?id=37000
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • RFC and Logical System names

    Hello......is it necessary to have RFC and Logical system name for the connected system to be identical?Is there any explanation behind this if thats true....

    Hi Gaurav,
    It is recommended, but not mandatory, right, Muthuraman?
    The system uses some transactions to determine which RFC will be used for the communication between one system and another, for example, in transaction 'Define backend systems' in SPRO, you can define that the current SRM client has an ECC backend system named X and the RFC destination for this X system is Y (not necessarily the same name).
    Regards,

  • RFC Destination and Logical System

    Hi Friends,
    Can anybody tell me how the RFC Destination and Logical System are related to each other?

    Hi,
    In any ALE scenario u need one sender and one receiver system.
    Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
    Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want  to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
    In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
    Thanks.

Maybe you are looking for