Maverick server - How to post out of office on clients

Hello there,
since Maverick server dropped webmail how are you suppose to place an out of office on an email account?
Thanks

Hi
Use RoundCube
http://roundcube.net/
http://topicdesk.com/downloads/roundcube/
Working here on:
OSX 10.9.2
Server 3.1
Roundcube Webmail 0.9.5
If you have a lot of emails in your account then it takes a little while to load but then OK.

Similar Messages

Client/server - how to make out

In solaris how to make out weather the installed version is a client or Server..
??

Hi,
Earlier I had clint installed on my system. Now, I installed server as well on the system (for local testing purposes). Now when I look for what you said, OUI shows only server and when I look for directory I see
1. C:\Program Files\Oracle\bin
2. E:\oracle\product\10.2.0\db_1\BIN
there is nothing like $ORACLE_HOME/bin/oracle
Now how can I say what is what?
OS Windows XP SP2
Oracle 10gR2

Mac Mail: How to prevent out-of-office reply infinite loop

I'm in the habit of sending myself e-minders to my own email. I'm leaving town and enabled my out-of-office reply and later sent myself a message and it created a continuous loop of replies that would have overwhelmed my inbox had I not caught it. Is there a way to avoid this? I set up rules saying only to reply if "From" did not include my email address but the loop still happened.
Thanks for your input!

Get yourself another email address, like Gmail and forward to it instead of using the vacation message feature.

Proxy server - how to find out

Hi to all,
i'm writig a java web start app and i'd like to know if my user has a proxy
server to connect the internet.
How can i read this setting?
I know, it should be saved in javaws.cfg (or deployment.properties) file,
i'd like to know your opinion if there is a better way to find out this
setting?
Or the one and only way is to check java web start version, than to find a
config file and finally to find a right section in this file to read if my
user uses a proxy server.
Thanks in advance for all opinions.
Best regards
Maras

I can't remember where it was documented, but you can check the following system properties, which are automatically set if you lauch an application via WebStart:
proxyHost, proxyPort, httpsProxyHost, httpsProxyPort

Mavericks Server, how to retain Spotlight contents in NetRestore

In my experience, after a computer is imaged via NetRestore, the computer always has to re-index Spotlight, and it can take 6-8 hours of additional time. These are lab computers where the volume is then "locked down" with Deep Freeze. Although these are large images (some with Parallels container (.pvm) files of 87 GB), I can get a computer imaged via NetRestore in 150 minutes, but to have to wait an additional 6-8 hours for Spotlight to reindex the computer makes imaging less flexible. Is there a setting I'm missing in creating the NetRestore volume that will let the already-created Spotlight index on the computer be moved to the imaged computer, and not have the imaged computer simply recreate an almost identical Spotlight index from scratch?
Thanks.

Open System Preferences. On the Mission Control page, make sure that "Automatically rearrange Spaces based on most recent use" is unchecked.

JCO3 Server: How to invoke a RFC callback to client

Dear Community,
i have created a working jcoserver program.
Now this program needs additional information from client (in this case a sap-system).
In classic RFC Lib and in Netweaver RFC SDK i can find some samples how to do this.
Look here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5070f62a-6acd-2c10-8cb5-858ef06adbb9?QuickLink=index&…
Page 10-12 and Page 16 contain information how to do this.
But i can't find anywhere an example for JCO3 or a documentation.
Is someone able to point me into the right direction or has a working code-snipplet?
Kind Regards,
Tom

Hi Markus,
oh, that is to easy, As i'm converting from Classic-C such easy ways are simply overlooked.
Correct code is then:
//JcoFunctionTemplate "temp" is initialized before
JCoFunction func = temp.getFunction();
func.execute ( JCoDestinationManager.getDestination ( "BACK" ) );
right?
Thank's a lot Markus, you helped me very much!
Is there any documentation where one can find out about such build ins ?
Not only related to JCO, similar for build in rfc function in server programs like RFC_DOCU and so on ?
Best regards,
Tom

How to find out a file from client machine

hi all,
I want to read a file from client machine, like a outlook express file in which all the address are saved, using servlet. Initially i do not know the file path for that file, How i can read that file.
plz help me
thanx in advace
Manish

You have 2 possibilities. First, you might be able to mount the client's disk drive at the server; the servlet can then access that drive directly. Second, install a client program on the client machine and communicate with that program, and have it do the search (or whatever).
Outside of Java, there are remote-access programs - like PCAnyWhere.

How can you put out of office on your email

I am unable to find out how to put out of office on my email?

https://support.mozilla.org/en-US/kb/vacation-response

How to find out the exact culpirit session

How to find out the exact culpirit client machine process to kill the session and release.
Thanks,

We can not directly solve this mystery, only you can do so.
V$SESSION contains data for all connected sessions.
If no unique combination of fields exists that allows you to identify the culprit client session, then you are out of luck.
See you started this thread with the premise that 1 session connected to the DB is a problem.
OK, we will accept this as being true.
Now via SQL how/what can you SELECT so that only 1 row is returned & that row corresponds to "problem client" session?
Since this is YOUR system & not ours, only you can solve this mystery.

DHCP Server is not passing out DHCP Leases

I can't seem to figure out why DHCP server is not passing out DHCP lease a client?
Also I can't seem to figure out why NVI0 interface is UP? I have setup another box similarly and NVI0 is down on that and the DHCP server is working fine on that too. Strange!
I am working on CISCO 881 VPN Router...Please have a look at it and let me know. Thanks
Here is the configuration in the box...
sh run
Building configuration...
Current configuration : 6543 bytes
! Last configuration change at 17:09:54 CST Fri Sep 14 2012 by XXXXX
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname XXXXX
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa authentication login default local
aaa authentication login vpn_xauth_ml_1 local
aaa authentication login sslvpn local
aaa authorization network vpn_group_ml_1 local
aaa session-id common
memory-size iomem 10
clock timezone CSTime -6
clock summer-time CST recurring
crypto pki trustpoint TP-self-signed-3079619067
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3079619067
revocation-check none
rsakeypair TP-self-signed-3079619067
crypto pki certificate chain TP-self-signed-3079619067
certificate self-signed 01
30820252 308201BB A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303739 36313930 3637301E 170D3132 30393134 31393231
32375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30373936
31393036 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100993C D622004B F3AEA1E5 81106C28 36EC52D0 5435ABC3 8912095F 3641168A
B67D97AF AEB43CF3 00A00EB5 702FA355 9F58EBEF F42294DC 0E32CF40 E17D372A
3BC36401 55EDBA5C 910B7A51 89D709A8 7EAB3FF0 E4C99D34 CBE3F316 069C0E16
BC284055 35E3D762 463DABF6 852C4E7A D2EF45A4 21F08689 4DF17870 9E2A6C27
1BFB0203 010001A3 7A307830 0F060355 1D130101 FF040530 030101FF 30250603
551D1104 1E301C82 1A506F70 6C617276 696C6C65 2E796F75 72646F6D 61696E2E
636F6D30 1F060355 1D230418 30168014 64EA4CAE 2029E4C2 702584C6 B5732464
5C9DA38A 301D0603 551D0E04 16041464 EA4CAE20 29E4C270 2584C6B5 7324645C
9DA38A30 0D06092A 864886F7 0D010104 05000381 81006C27 96E06B83 04DBDA81
EEB0AF35 84ED370E A8C9694E F9B9326D 69CB1043 9C396D7B 760D252F 4881926D
878E434F 9AFC3E6D A5BF43F2 E619D6EC F45C039A 5FFB478F A99F7EE5 274E37D5
11976FDE 823FD1A9 700203E5 67A329B3 F4CF45F0 245757C8 E2349276 B13414D1
017616FA 38A40BA8 42545AC5 C7676D21 29E4F491 CADB
        quit
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.1.1 192.168.100.101
ip dhcp excluded-address 192.168.1.254
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
ip dhcp pool Internal_Network
   network 192.168.1.0 255.255.255.0
   dns-server 192.168.100.254
   default-router 192.168.1.254
ip cef
ip domain name yourdomain.com
ip name-server 192.168.100.254
no ipv6 cef
license udi pid CISCO881-K9 sn FTX1604828T
username XXXXX privilege 15 secret 5 $1$QEcR$96cmvs/h/.05G6BnorcWG/
username XXXXX secret 5 $1$PQQ1$3.Vin0i/2uZ/KD0xEJ8GC.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp client configuration group YYYYYYY
key XXXXX_XXXXX_XXXXX
pool VPN-Pool
acl VPN-Access-List
crypto isakmp profile vpn-isakmp-profile-1
   match identity group YYYYYYY
   client authentication list vpn_xauth_ml_1
   isakmp authorization list vpn_group_ml_1
   client configuration address respond
   virtual-template 2
crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac
crypto ipsec profile VPN-Profile-1
set transform-set encrypt-method-1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description WAN_INTERFACE
ip address 192.168.100.3 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Virtual-Template2 type tunnel
ip unnumbered FastEthernet0
tunnel mode ipsec ipv4
tunnel protection ipsec profile VPN-Profile-1
interface Vlan1
description VLAN1_INTERFACE
ip address 192.168.1.254 255.255.255.0
no ip redirects
no ip unreachables
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip local pool VPN-Pool 192.168.1.151 192.168.1.200
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 100 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.1.100 21 192.168.100.3 21 extendable
ip nat inside source static tcp 192.168.1.100 80 192.168.100.3 80 extendable
ip route 0.0.0.0 0.0.0.0 192.168.100.254
ip access-list extended VPN-Access-List
permit ip 192.168.1.0 0.0.0.255 any
permit tcp host A.B.C.D host 192.168.1.100 eq ftp
permit tcp host A1.B1.C1.D1 host 192.168.1.100 eq ftp
permit tcp host A2.B2.C2.D2 host 192.168.1.100 eq ftp
permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.100 eq ftp
permit tcp host A3.B3.C3.D3 host 192.168.1.100 eq ftp
permit tcp any host 192.168.1.100 eq XXX
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner motd ^C XXXXX-XXXXX VPN Router ^C
line con 0
exec-timeout 30 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password 7 124A50424A5E5550
transport input telnet ssh
scheduler max-task-time 5000
end

Hi Jennifer,
I have gotten it resolved. Per your suggestion, I have turned on debug ip dhcp events and found that POOL EMPTY message. After little research, I found out that I have made a mistake in my excluded-address range.
I have had it as
ip dhcp excluded-address 192.168.1.1 192.168.100.101
It should have been
ip dhcp excluded-address 192.168.1.1 192.168.1.101.
It was a typo.
Thank you for the suggestion.
Srini

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

HTTP Submit Button - How to post data to a Web Server

HTTP Submit Button - How to post data to an IIS Server
Steveoruni - 09:50am Sep 4, 2007 Pacific
Hello,
I have created a simple form in LiveCycle designer. The form only has some check boxes, radio buttons and text fields for users to fill out. Everyone in my office is on webmail so the Email Submit button is not a smooth option for getting the xml data back to me.
I would like to use the HTTP Submit button to allow users to submit their form data back to me but I am having trouble. I would like the xml files to end up in a directory on the web server.
I set up an IIS 6 server and granted the Write right to the anonymous web user account. When I fill out the PDF form and click the HTTP Submit button it doesn't seem to work. Are there any special configuration changes I need to make to my IIS server to allow this data to be posted?
Should this plan work? Should I be able to have users use the HTTP Submit button to post their data right to my IIS web server or is there some Adobe server I need to buy for this simple form? I'd also be happy if this could work with Apache; it doesn't need to be IIS. I guess my main issue is that I don't know how to get either web werver to accept data in an HTTP post and save it as a file.
Also, I noticed that when I configure a standard button and set the Control Type to "Submit", there is an option on the Submit Tab to change the Submit As setting to "PDF". Does this mean that my users can fill out my form with Acrobat Reader and HTTP Submit the form to my web server as a PDF complete with their data? If not that's fine, I would be sufficiently happy if the users could post their XML files to the web server so I can open them in the form with Acrobat Professional.
I am lost and would appreciate any helpful feedback.
Thanks,
Steve

HI again,
I want to have a pdf fillable form opened on a link.Once user has entered data, the user clicks a button(or some action to invoke saving). At this point I want the filled pdf file to be saved on a certain directory.
How can save a filled pdf form in pdf format on a certain directory?
Is it possible to dynamically give the final pdf a name so that it doesnt overwrite everytime it saves the file?

Out of office Relpy for apple Mail on Mountain Lion Server

We just recently switched our server from Lion to Mountain Lion and now we can not figure out how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server. I have searched the internet for an aswer and/or instructions on how to do this and haven't found any.
As anyone figured out how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server?

Eustace - Thanks for taking a crack at it! I saw this same post as well but it doesn't answer my question about how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server?
I'm not looking to create an out of office rule on my computer but on our Mountain Lion Server like we used to be able to do on Lion Server.

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Exchange 2013 - OWA "Something Went Wrong", Out of office in Outlook "Server unavailable"

Hi,
We have a new deployment of Exchange 2013 CU2 V2 running on a Windows 2012 server. Everything has been running without issues and then without any real clue to why, we are now getting an issue where OWA says "Something Went Wrong" after processing
your login, (it appears to process the login as if I type in incorrect details it tells me the password/username is wrong).
At the same time we have also lost the ability to run the Out Of Office in Outlook which comes back saying the server is not available and we can't seem to share calendars correctly either. (Can set Out Of Office via the Management Shell without issues).
When running a Get-Serverhealth on the OWA.Protocol it tells me the OWASelfTestMonitor is unhealthy.
I've tried re-creating the OWA, EWS Virtual Directorys and also the autodiscover but with no effect. I've also restarted the server.
Outlook 2013 and mobile phones are working fine on the server and the Exchange Admin Centre is also working without issues.
I am getting tempted to apply CU2 again to see if this sorts it but don't really like doing this on a server with 50 live users on it...
In the eventlog I can see lots of the 2 errors listed below which seems to line up. (System Log and Application Log seem to be clear of other errors or warnings.)
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 04/11/2013 11:25:00
Event time (UTC): 04/11/2013 11:25:00
Event ID: 2fcdb9112c794b63a9ea9577a23e4603
Event sequence: 2
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/owa-411-130280378905273269
    Trust level: Full
    Application Virtual Path: /owa
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\
    Machine name: SERVERNAME (I altered this for post)
Process information:
    Process ID: 9648
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
Exception information:
    Exception type: HttpException
    Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
Lots more code.......
AND
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 04/11/2013 11:24:24
Event time (UTC): 04/11/2013 11:24:24
Event ID: 2586a044b2d74b97a1095aec478bf4ae
Event sequence: 2
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/EWS-668-130280378564324526
    Trust level: Full
    Application Virtual Path: /EWS
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\exchweb\EWS\
    Machine name: SERVERNAME (I have changed this for post)
Process information:
    Process ID: 9840
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
Exception information:
    Exception type: HttpException
Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
lots more data...

Hi Angela,
I can't see any re-directions on the website and have certainly not set any intentionally. I did try installing the Remote Web Gateway on the server and then found that it doesn't work on an exchange box and removed it but the server was working after
this.
The HTTP Redirect in Default Web Site is not showing anything set and the same for the Back End.
The bindings on the default site all look normal with;
http     80   127.0.0.1
https   443 127.0.0.1
http     80    *
http    443   *
The same is mirrored in the Exchange Back End site but with ports 81 and 444.
Running the Outlook auto configure just using Autodiscover all looks good with the URLs listed all pointing to (http)://mail.mydomain.co.uk/whatever... and the log says Autodiscover to (https)://mail.mydomain.co.uk/Autodiscover/Autodiscover.xml Suceeded
(0x00000000)
But, if I type in the OOF address of (https)://mail.mydomain.co.uk/EWS/exchange.asmx I get a login prompt but once user details are entered I then get;
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
   System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) +163
   System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace() +7572550
   System.Xml.XmlTextReaderImpl.ParseDocumentContent() +62
   System.Xml.XmlReader.ReadToFollowing(String name) +112
   Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.ReadKillBitXmlContent(XmlReader reader, Int32& refreshRate) +185
   Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.TryReadKillBitFile(Int32& refreshRate, DateTime& lastModifiedTime) +710
   Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitTimer.Start() +202
   Microsoft.Exchange.Services.Global.Application_Start(Object sender, EventArgs e) +975
[HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
   System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +12864205
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +175
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): '.', hexadecimal value 0x00, is an invalid character. Line 1, position 1.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12880948
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12722137
Really wishing I had installed Exchange 2010 at this point!! Just can't see why its not working :(

Maverick server - How to post out of office on clients

Similar Messages

Maybe you are looking for