Mavericks 10.9-10.9.1 bug/issue/problem: external drives connected through thunderbolt or firewire are not put to sleep when iMac goes to sleep

Previous to Mavericks (10.9 - 10.9.1) I've had no issues with external firewire or thunderbolt connected drives to be put to sleep. However, since Mavericks all of my external drives are not put to sleep when my iMac, or Mac Pro go to sleep.
How can a company such as Apple, pushing people to have external devices like hard drives, is not on top of fixing this issue? Apple pushed for firewire and thunderbolt, thus All external drives I've owned are firewire. Because of speed. I bought thunderbolt adapters for firewire, and before Mavericks all worked great. Now that we have 10.9.1 update, this is still an issue!
I'm aware of the temporary solution of connecting the drive through USB to make it work, this is not a solution, but a hack.
Please let Apple know that this is a known issue, and there should be a fix for it. Everyone's data depends on it! Not only current external backups, but also external sensitive hard drives we rely on. Currently, the following makes are experiencing this issue: Lacie, OWC (Elite Pro), WD, Promise, Seagate, Toshiba, G-Drive.
Other Apple Support Communities related thread:
https://discussions.apple.com/thread/5486167?start=60&tstart=0
https://discussions.apple.com/message/23541363
External References:
http://blog.macsales.com/21004-upgrade-to-mavericks-drama-free-with-owc
http://forums.macrumors.com/showthread.php?t=1659332&page=3
If anyone finds how to solve this issue, please help by posting the steps or solution.

Same 2 issues with 10.9.3:
External FireWire drive WILL NOT spin down when Mac goes to sleep.
also
External FireWire drive WILL NOT spin down for inactivity despite “Put hard disks to sleep when possible” is checked in energy saver.
This has been going on since the launch of Mavericks and no solution found yet.
USB ports work normally.

Similar Messages

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • XI adapter polling issue & JDBC  / DB2 driver connection timeout properties

    Hello Group,
    We have a long running issue with our XI 7.0 system running on iseries. (V5R3) The issue occuring is that our XI adapters stop polling and the only resolution is to restart the J2EE engine or to resart the adapter framework services.
    We have had several OSS messages open on this subject for over a year and are going round in circles with the a number of different SAP consultants.
    The one topic that we keep coming back to is that we are being asked to set DB2 driver connection timeout properties. We are using the toolbox driver and have upated to the latest JTopen driver, but have not managed to find any inofrmation on how to set the timeout parameter. Does anyone know where the timeout parameter set?
    Has anyone experienced polling issue like this before and how did you resolve?
    SAP referred to the SAP note 1078420 - XI/PI JDBC Adapter: Setting JDBC driver properties for DB which is for Oracle, but this will give an idea of what timeout parameters SAP are asking about.
    Extract of the note is below:-
    Symptom
    This note gives an option to set JDBC driver properties while acquiring a DB connection. When connecting to DB using JDBC adapter there are instances
    where DB connection take a long time to establish connection. Some times call made to Driver will hang permanently. Setting driver properties would resolve this problem.
    More Terms
    Connection timeout, time out, query timeout
    Cause and Prerequisites
    Solution
    In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any
    such property would have to contain prefix 'driver:'(with out quotes) For example, for Oracle Database JDBC thin driver 10.2.0.3 version, the
    property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use
    oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows:
    driver:oracle.jdbc.ReadTimeout 1000
    driver:oracle.net.CONNECT_TIMEOUT 1000
    (The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds)
    Refer to your DB documentation/ JDBC driver documentation on this. Please note that properties can vary from each driver version. For instance, some
    of properties of Oracle JDBC thin Driver 10.2.0.3 properties may not be present in older version drivers. Please contact DB vendor for the complete
    list of driver properties. In addition to above, we also provide another parameter for query time out.
    sqlquerytimeout (prefix 'driver:' is not required) is the parameter that is to be used for SQL query time out. This is case-sensitive and should be
    configured as positive integer value in seconds(greater than 0).
    Any help on this would be much appreciated.
    With regards,
    Steven

    Hello,
    I am not talking about the XI timeouts. But the timeouts which can be used to get the connection timeouts for DB2/AS400 databases.
    So please provide that information.
    THanks,
    soorya

  • IMac goes to sleep/hibernate multiple times per day after installing Maverick OS. I have to shutdown and power back on.

    iMac goes to sleep/hibernate multiple times per day after installing Maverick OS. Moving the mouse or hitting the spcaebar will not wake the pc. 
    I have to shutdown and power back on. My iMac was purchased in January 2011 and no longer in warrenty.  The energy saver 'sleep' and 'display' settings are set at 10 minutes. When I changed to 'never' the machine got very hot and I changed the settings back.  I have checks by: Put hard disk to sleep when possible and wake for network access.  Any help would be greatly appreciated. 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Flash CS4 Bug saving to external drive?

    I discovered last week when teaching my Flash class that in saving FLAs to my USB drive, and THEN testing/publishing, the AS3 code was ignored in the resulting SWF?EXE files.  I duplicated the situation with multiple computers, mutliple external drives and multiple FLA files. I even tried it at differnt locations (home and campus). The problem is only related to CS4 with Actionscipt 3.  Both CS3/AS3 and CS4/AS2 test/compile as one would expect. Save the CS4/AS3 file to the internal C: drive and then test/publish everything works fine. Go figure! WHy would the save location make any difference? I thought perhaps it was a PATH environment variable issue, but putting the external drive path in the PATH statement caused no effect.
    Here's the information I'm providing to my class tonight. Anyone else encountering the same? BTW, I upgraded to release 10.0.2 but to no avail.
    THE PROBLEM:
    I think I discovered a pretty major bug in Flash CS4. When creating an ActionScript 3 file (with scripts written on the timeline) and saving the FLA source to an external drive (such as a USB thumb drive) and then testing (Control > Test Movie) or publishing (File > Publish), the AS3 code is ignored in the resulting SWF or EXE. If you save the file to the C: drive and then test/publish, it works fine. I tried this on several computers with several different FLA files and differing script, with several devices including a network drive – all with the same result.
    I posted the problem to the ActionScript forum at adobe.com and contacted tech support (via email) but have yet to receive any useful feedback.
    SOLUTIONS:
    OPTION 1: Save your FLA to the hard drive before testing. You can create a temporary folder on the desktop of the campus computers or should have access to C:\TEMP. So save your files there and at the end of you session, be sure to copy the files (both the FLA and any published files) to your USB for safekeeping. When updating your FLA, first copy it to the internal C: hard drive, then make changes and test, etc.
    OPTION 2: AS3 code written to an external .AS file does work when compiled. But this really is beyond the scope of this class and adds a lot of complexity.
    OPTION 3:  Use Flash CS3 – works fine in CS3, but of course you can’t use any of the cool new CS4 features such as new motion tweening, and inverse kinematics (IK bone structures).

    Susan,
    Would the File > Archive Project do what you want?
    Don S.

  • Issue with SPA525g registation and FXO port call calls are not disconnecting properly

    Hi,
    I  have a UC540 and updated it to the latest IOS version with the latest  firmware to my phones and i am having registration problems with SPA525g  IP Phones. I updated the firmware of the phones as well and create  manual tftp bindings with but still it is not registering. I run a  couple of debugs (debug tftp events and debug ephone registration) I can  see from the logs and in the phone that it is taking the proper VLAN  and being discovered via CDP and being pointed to the TFTP server and  still wont register. I can see that it is also taking its own .cnf file  properly then the output sccp token regected invalid devices error is  shown I have a SPA502G and it is working fine. Also there is a previous  issue that all the voice port are shown as engage or offhook even the  calls are disconnected thus make the main PSTN number busy am based in  UAE and our service provider is etisalat I have check with them about  the proper disconnection values but still it the same. That's why I have  arrived in the conclusion to just update everything including the IOS  and the phones firmware. I have put my config in this post, I am also  trying to take the CCNA Voice exam on the 2nd week of april and I think  that if i don't know how fix this issue for our customer then I would  probably fail that exam. any suggestion and help is greatly appreciated  cisco experts.
    ! Last configuration change at 13:36:42 ZP4 Thu Sep 13 2012 by Nick
    ! NVRAM config last updated at 13:45:41 ZP4 Thu Sep 13 2012 by Nick
    version 15.1
    parser config cache interface
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    service internal
    service compress-config
    service sequence-numbers
    hostname UC540
    boot-start-marker
    boot system flash:uc500-advipservicesk9-mz.151-2.T4
    boot-end-marker
    logging buffered 64000
    enable secret 5 $1$3CIf$.rXyHeJQrwd97X/f2dS0M1
    no aaa new-model
    clock timezone ZP4 4 0
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-3558175224
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3558175224
    revocation-check none
    crypto pki certificate chain TP-self-signed-3558175224
    certificate self-signed 01 nvram:IOS-Self-Sig#3.cer
    dot11 syslog
    dot11 ssid cisco-data
    vlan 1
    authentication open
    dot11 ssid cisco-voice
    vlan 100
    authentication open
    ip source-route
    ip cef
    ip dhcp relay information trust-all
    ip dhcp excluded-address 10.1.3.1 10.1.3.10
    ip dhcp pool phone
       network 10.1.3.0 255.255.255.0
       default-router 10.1.3.1
       option 150 ip 10.1.3.1
    ip name-server 213.42.20.20
    ip name-server 195.229.241.222
    ip inspect WAAS flush-timeout 10
    ip inspect name SDM_LOW cuseeme
    ip inspect name SDM_LOW dns
    ip inspect name SDM_LOW ftp
    ip inspect name SDM_LOW h323
    ip inspect name SDM_LOW https
    ip inspect name SDM_LOW icmp
    ip inspect name SDM_LOW imap
    ip inspect name SDM_LOW pop3
    ip inspect name SDM_LOW netshow
    ip inspect name SDM_LOW rcmd
    ip inspect name SDM_LOW realaudio
    ip inspect name SDM_LOW rtsp
    ip inspect name SDM_LOW esmtp
    ip inspect name SDM_LOW sqlnet
    ip inspect name SDM_LOW streamworks
    ip inspect name SDM_LOW tftp
    ip inspect name SDM_LOW tcp router-traffic
    ip inspect name SDM_LOW udp router-traffic
    ip inspect name SDM_LOW vdolive
    no ipv6 cef
    multilink bundle-name authenticated
    stcapp ccm-group 1
    stcapp
    stcapp supplementary-services
    port 0/0/0
      fallback-dn 301
    port 0/0/1
      fallback-dn 302
    port 0/0/2
      fallback-dn 303
    port 0/0/3
      fallback-dn 304
    trunk group ALL_FXO
    max-retry 5
    voice-class cause-code 1
    hunt-scheme longest-idle
    translation-profile outgoing PROFILE_ALL_FXO
    trunk group ALL_FX0
    voice call send-alert
    voice rtp send-recv
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    sip
      no update-callerid
    voice class codec 1
    codec preference 1 g711alaw
    codec preference 2 g711ulaw
    voice class dualtone-detect-params 1
    freq-max-deviation 50
    freq-max-power 0
    freq-min-power 13
    freq-power-twist 4
    cadence-variation 6
    voice class custom-cptone UAE-CUSTOM
    dualtone disconnect
      frequency 406
      cadence 398 344 237 527 400
    voice class custom-cptone CCAjointone
    dualtone conference
      frequency 600 900
      cadence 300 150 300 100 300 50
    voice class custom-cptone CCAleavetone
    dualtone conference
      frequency 400 800
      cadence 400 50 200 50 200 50
    voice class cause-code 1
    no-circuit
    voice register global
    voice hunt-group 1 parallel
    list 301,302,303
    timeout 24
    pilot 511
    voice translation-rule 4
    rule 15 // //
    voice translation-rule 1000
    rule 1 /.*/ //
    voice translation-rule 1111
    voice translation-rule 1112
    rule 1 /^9/ //
    rule 3 /^0/ //
    voice translation-rule 2222
    voice translation-rule 3265
    rule 1 /\(^..........$\)/ /9\1/
    rule 2 /\(^.........$\)/ /9\1/
    rule 15 /\(^ABCD$\)/ /ABCD\1/
    voice translation-profile CALLER_ID_TRANSLATION_PROFILE
    translate calling 1111
    voice translation-profile CallBlocking
    translate called 2222
    voice translation-profile INCOMING_CallerID_PROFILE
    translate calling 3265
    voice translation-profile OUTGOING_TRANSLATION_PROFILE
    translate called 1112
    voice translation-profile PROFILE_ALL_FXO
    translate calling 4
    voice translation-profile nondialable
    translate called 1000
    voice-card 0
    dspfarm
    dsp services dspfarm
    license udi pid UC540W-FXO-K9 sn FHK143074G6
    archive
    log config
      logging enable
      logging size 600
      hidekeys
    username cisco privilege 15 secret 5 $1$vjNa$OFKLhupqR8al6x2b8Xmcj/
    username adminac privilege 15 secret 5 $1$NDC.$PtD0y4YGIj5SqI1gghxWE1
    username Nick privilege 15 secret 5 $1$iAmL$tsg7Jf2TEND1NN.h8z2dy/
    ip tftp source-interface Loopback0
    bridge irb
    interface Loopback0
    description $FW_INSIDE$
    ip address 10.1.10.2 255.255.255.252
    ip access-group 101 in
    ip nat inside
    ip virtual-reassembly in
    interface FastEthernet0/0
    description $FW_OUTSIDE$
    ip address 192.168.101.2 255.255.255.252
    ip nat outside
    ip virtual-reassembly in
    duplex auto
    speed auto
    interface Integrated-Service-Engine0/0
    description cue is initialized with default IMAP group
    ip unnumbered Loopback0
    ip nat inside
    ip virtual-reassembly in
    service-module ip address 10.1.10.1 255.255.255.252
    service-module ip default-gateway 10.1.10.2
    interface FastEthernet0/1/0
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/1
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/2
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/3
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/4
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/5
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/6
    switchport voice vlan 100
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/7
    switchport access vlan 20
    spanning-tree portfast
    interface FastEthernet0/1/8
    switchport access vlan 100
    macro description cisco-switch
    interface Dot11Radio0/5/0
    no ip address
    shutdown
    ssid cisco-data
    ssid cisco-voice
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    interface Dot11Radio0/5/0.1
    encapsulation dot1Q 1 native
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0/5/0.100
    encapsulation dot1Q 100
    bridge-group 100
    bridge-group 100 subscriber-loop-control
    bridge-group 100 spanning-disabled
    bridge-group 100 block-unknown-source
    no bridge-group 100 source-learning
    no bridge-group 100 unicast-flooding
    interface Vlan1
    no ip address
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Vlan20
    ip address 10.10.10.1 255.255.255.0
    interface Vlan100
    no ip address
    bridge-group 100
    bridge-group 100 spanning-disabled
    interface BVI1
    description $FW_INSIDE$
    no ip address
    ip nat inside
    ip virtual-reassembly in
    shutdown
    interface BVI100
    description $FW_INSIDE$
    ip address 10.1.3.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http path flash:/gui
    ip dns server
    ip nat inside source list 1 interface FastEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 192.168.101.1
    ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
    logging esm config
    access-list 1 remark SDM_ACL Category=2
    access-list 1 permit 192.168.10.0 0.0.0.255
    access-list 1 permit 10.1.3.0 0.0.0.255
    access-list 1 permit 10.1.10.0 0.0.0.3
    access-list 100 remark auto generated by SDM firewall configuration
    access-list 100 remark SDM_ACL Category=1
    access-list 100 deny   ip 192.168.10.0 0.0.0.255 any
    access-list 100 deny   ip host 255.255.255.255 any
    access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 100 permit ip any any
    access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
    access-list 101 remark SDM_ACL Category=1
    access-list 101 permit tcp 10.1.3.0 0.0.0.255 eq 2000 any
    access-list 101 permit udp 10.1.3.0 0.0.0.255 eq 2000 any
    access-list 101 deny   ip 10.1.3.0 0.0.0.255 any
    access-list 101 deny   ip 192.168.10.0 0.0.0.255 any
    access-list 101 deny   ip 192.168.101.0 0.0.0.3 any
    access-list 101 deny   ip host 255.255.255.255 any
    access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 101 permit ip any any
    access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
    access-list 102 remark SDM_ACL Category=1
    access-list 102 deny   ip 10.1.10.0 0.0.0.3 any
    access-list 102 deny   ip 10.1.3.0 0.0.0.255 any
    access-list 102 deny   ip 192.168.101.0 0.0.0.3 any
    access-list 102 deny   ip host 255.255.255.255 any
    access-list 102 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 102 permit ip any any
    access-list 102 permit ip 192.168.101.0 0.0.0.3 any
    access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
    access-list 103 remark SDM_ACL Category=1
    access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
    access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
    access-list 103 deny   ip 10.1.10.0 0.0.0.3 any
    access-list 103 deny   ip 192.168.10.0 0.0.0.255 any
    access-list 103 deny   ip 192.168.101.0 0.0.0.3 any
    access-list 103 deny   ip host 255.255.255.255 any
    access-list 103 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 103 permit ip any any
    access-list 105 permit ip any any
    snmp-server community public RO
    tftp-server flash:/phones/521_524/cp524g-8-1-17.bin alias cp524g-8-1-17.bin
    tftp-server flash:/phones/5x5/spa5x5-7-1-3c.bin alias spa5x5-7-1-3c.bin
    tftp-server flash:/phones/525/spa525g-7-4-8.bin alias spa525g-7-4-8.bin
    control-plane
    bridge 1 route ip
    bridge 100 route ip
    voice-port 0/0/0
    cptone GB
    station-id name Cordless
    station-id number 329
    caller-id enable
    voice-port 0/0/1
    cptone AE
    caller-id enable
    voice-port 0/0/2
    cptone AE
    caller-id enable
    voice-port 0/0/3
    cptone AE
    caller-id enable
    voice-port 0/1/0
    trunk-group ALL_FX0 64
    translation-profile incoming INCOMING_CallerID_PROFILE
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone UAE-CUSTOM
    input gain 14
    cptone GB
    connection plar opx 511
    impedance 600c
    description Configured by CCA 4FXO-0/1/0-Custom-BG
    bearer-cap Speech
    caller-id enable
    voice-port 0/1/1
    trunk-group ALL_FX0 64
    translation-profile incoming INCOMING_CallerID_PROFILE
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone UAE-CUSTOM
    input gain 14
    cptone GB
    connection plar opx 511
    impedance 600c
    description Configured by CCA 4 FXO-0/1/1-Custom-BG
    bearer-cap Speech
    caller-id enable
    voice-port 0/1/2
    trunk-group ALL_FX0 64
    translation-profile incoming INCOMING_CallerID_PROFILE
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone UAE-CUSTOM
    supervisory dualtone-detect-params 1
    input gain 14
    cptone GB
    connection plar opx 511
    impedance 600c
    description Configured by CCA 4 FXO-0/1/2-Custom-BG
    bearer-cap Speech
    caller-id enable
    voice-port 0/1/3
    trunk-group ALL_FX0 64
    translation-profile incoming INCOMING_CallerID_PROFILE
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone UAE-CUSTOM
    input gain 14
    cptone GB
    connection plar opx 511
    impedance 600c
    description Configured by CCA 4 FXO-0/1/3-Custom-BG
    bearer-cap Speech
    caller-id enable
    voice-port 0/4/0
    auto-cut-through
    signal immediate
    input gain auto-control -15
    description Music On Hold Port
    sccp local Loopback0
    sccp ccm 10.1.3.1 identifier 1 version 4.0
    sccp
    sccp ccm group 1
    associate ccm 1 priority 1
    associate profile 1 register confprof1
    dspfarm profile 1 conference 
    description DO NOT MODIFY, active CCA conference profile - CCA2.0 codec729
    codec g711ulaw
    codec g711alaw
    codec g729ar8
    codec g729abr8
    codec g729r8
    codec g729br8
    maximum sessions 2
    associate application SCCP
    dial-peer cor custom
    name internal
    name local
    name local-plus
    name international
    name national
    name national-plus
    name emergency
    name toll-free
    dial-peer cor list call-internal
    member internal
    dial-peer cor list call-local
    member local
    dial-peer cor list call-local-plus
    member local-plus
    dial-peer cor list call-national
    member national
    dial-peer cor list call-national-plus
    member national-plus
    dial-peer cor list call-international
    member international
    dial-peer cor list call-emergency
    member emergency
    dial-peer cor list call-toll-free
    member toll-free
    dial-peer cor list user-internal
    member internal
    member emergency
    dial-peer cor list user-local
    member internal
    member local
    member emergency
    member toll-free
    dial-peer cor list user-local-plus
    member internal
    member local
    member local-plus
    member emergency
    member toll-free
    dial-peer cor list user-national
    member internal
    member local
    member local-plus
    member national
    member emergency
    member toll-free
    dial-peer cor list user-national-plus
    member internal
    member local
    member local-plus
    member national
    member national-plus
    member emergency
    member toll-free
    dial-peer cor list user-international
    member internal
    member local
    member local-plus
    member international
    member national
    member national-plus
    member emergency
    member toll-free
    dial-peer voice 1 pots
    port 0/0/0
    no sip-register
    dial-peer voice 2 pots
    port 0/0/1
    no sip-register
    dial-peer voice 3 pots
    port 0/0/2
    no sip-register
    dial-peer voice 4 pots
    port 0/0/3
    no sip-register
    dial-peer voice 5 pots
    description ** MOH Port **
    destination-pattern ABC
    port 0/4/0
    no sip-register
    dial-peer voice 50 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/0
    dial-peer voice 51 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/1
    dial-peer voice 52 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/2
    dial-peer voice 53 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/3
    dial-peer voice 54 pots
    description ** FXO pots dial-peer **
    destination-pattern A0
    port 0/1/0
    no sip-register
    dial-peer voice 55 pots
    description ** FXO pots dial-peer **
    destination-pattern A1
    port 0/1/1
    no sip-register
    dial-peer voice 56 pots
    description ** FXO pots dial-peer **
    destination-pattern A2
    port 0/1/2
    no sip-register
    dial-peer voice 2000 voip
    description ** cue voicemail pilot number **
    destination-pattern 388
    b2bua
    session protocol sipv2
    session target ipv4:10.1.10.1
    voice-class sip outbound-proxy ipv4:10.1.10.1 
    dtmf-relay rtp-nte
    codec g711ulaw
    no vad
    dial-peer voice 6 pots
    description "catch all dial peer for BRI/PRI"
    translation-profile incoming nondialable
    incoming called-number .%
    direct-inward-dial
    dial-peer voice 57 pots
    description ** FXO pots dial-peer **
    destination-pattern A3
    port 0/1/3
    no sip-register
    dial-peer voice 69 pots
    destination-pattern 329
    port 0/0/0
    dial-peer voice 300 pots
    trunkgroup ALL_FX0
    description Local Numbers
    destination-pattern 9T
    forward-digits 9
    dial-peer voice 301 voip
    destination-pattern 2..
    session target ipv4:192.168.201.2
    dial-peer voice 303 pots
    trunkgroup ALL_FXO
    trunkgroup ALL_FX0
    description **InternationalCall**
    destination-pattern 88T
    dial-peer voice 304 pots
    trunkgroup ALL_FX0
    description *EM1*
    destination-pattern 9[1-9]T
    forward-digits 3
    dial-peer voice 302 pots
    trunkgroup ALL_FX0
    description **Mobiles**
    destination-pattern 9.[0-9].[0-9]......
    dial-peer voice 305 pots
    trunkgroup ALL_FX0
    description **800-**
    destination-pattern 9[0-9][0-9][0-9]T
    no dial-peer outbound status-check pots
    telephony-service
    sdspfarm conference mute-on 111 mute-off 222
    sdspfarm units 5
    sdspfarm tag 1 confprof1
    conference hardware
    video
    fxo hook-flash
    max-ephones 40
    max-dn 300
    ip source-address 10.1.3.1 port 2000
    max-redirect 20
    auto assign 1 to 1 type bri
    calling-number initiator
    service phone videoCapability 1
    service phone webAccess 0
    service dnis overlay
    service dnis dir-lookup
    timeouts interdigit 5
    system message American Center
    url services http://10.1.10.1/voiceview/common/login.do
    url authentication http://10.1.10.2/CCMCIP/authenticate.asp 
    load 521G-524G cp524g-8-1-17
    load 525G spa525g-7-4-8
    load 501G spa5x5-7-1-3c
    load 502G spa5x5-7-1-3c
    load 504G spa5x5-7-1-3c
    load 508G spa5x5-7-1-3c
    load 509G spa5x5-7-1-3c
    time-zone 35
    date-format dd-mm-yy
    voicemail 388
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    hunt-group logout HLog
    moh MOH2.wav
    multicast moh 239.10.16.16 port 2000
    web admin system name cisco secret 5 $1$iDgA$MKNi2RWfsO0KjuC82kgLJ1
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern 9.T
    transfer-pattern .T
    secondary-dialtone 9
    fac standard
    create cnf-files version-stamp 7960 Aug 29 2012 12:00:04
    line con 0
    privilege level 15
    logging synchronous
    no modem enable
    line aux 0
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    line vty 0 4
    exec-timeout 0 0
    logging synchronous
    login local
    transport input all
    line vty 5 100
    login local
    transport input all
    ntp master
    end
    Some of the output are not shown becaus it is to long I have attach the  whole config for reference and any advice on how could I optimize and  resolve my issues is greatly appreciated. Thanks

    Nicolo - First off this stuff gets crazy sometimes.  No worries about the exam.  Sometimes when FXO ports go crazy it is due to battery reversal.  If you go to the FXO port settings try turning battery reversal on and or off... depending on its current setting.  See if that helps. 
    As for the 525s not registering..  These are inside the network correct?  Are you connecting one directly to the UC500 with a Cat5E or Cat6 patch cable and the same thing happens?  Does the MAC address on the phone match a MAC address under the EPHONE settings? 
    If you telnet into the UC500 can you execute a "dir" command at the CLI prompt and "CD" (change directory) into the phones folder and then the spa525g folder?  Do files exist in there? 
    Also I only see an IP address under BVI100?  This is the voice side of things what happened to the IP address under BVI1 (Data VLAN).  Can you give us some information about the internal network?  Cna you PING this phone system from the network?  What IP address does it have?

  • IMac goes to sleep unexpectedly, Finder issues with flash drives - related?

    My iMac falls asleep for no known reason, often in the middle of active use. (Similar problem recently described in thread with messageID=11829917.)
    Sleep onset is frequent but seems to vary based on both currently-running software and attached devices (particularly USB flash drives). It will almost always wake up when I hit the space bar afterward, but might sleep again within a minute or two, then not for an hour or more. The sleep occurs with little notice (brief stall of display, sometimes enough time to click on another app window and bring that forward before the screen goes dark), and 95% of the time the computer wakes up after hitting the spacebar. The other 5 % of the time the display reappears but the entire OS is frozen and usually requires unplugging the power cable. There are other symptoms in the Finder - more below. Once in a while the fan revs up like a WWII fighter plane taking off from a carrier, but this is unusual and all the really irritating stuff also happens without this symptom, which usually stops on its own. Immediately after reawakening error messages are displayed to report that flash drives were improperly disconnected (Tell me about it! This has been the case for several months whether the computer goes to sleep by itself or if I put it there manually.)
    The computer seems to go into sleep mode most frequently when not-particularly-demanding graphics (Photoshop Elements and Adobe Reader) and video (QuickTime Pro 7.6.4) apps are running. Turning these off makes nod-offs less frequent but doesn't stop it entirely. When video thumbnails are displayed in Finder windows a lot of time may be required to load the data and this often paralyzes everything else AND this also seems to be a trigger for a nod-off (i.e. QuickTime not necessary to make the computer choke). This is highly variable and some video clips load quickly (< 20 sec), while others take several minutes, and this doesn't necessarily correlate with file size.
    Another factor is whether flash drives are connected - these seem to make the nod-offs more frequent AND Finder regularly loses communication to these both while just sitting there and also in the middle of file transfers. A very early 250 MB drive (Lexar - vintage 2004) will always communicate, but different USB2-capable drives all are either unreliable (Lexar 8 GB and KData 4 GB both < 1 yr old) or apparently dead (Lexar 2 GB ~ 2 yr old). The failures may be damaging the drives - they are inconsistent-to-bad at communicating with my MacBook Pro. I know this sounds like the drives are at fault, but there are things which make me suspect the OS (both computers use the same version): 1) different flash drives display the same on-again-off-again behavior AND the 2) the 2 GB drive that hasn't communicated with my Macs in over a month has no trouble talking with my wife's WinXP computer. When communication isn't working with these drives, they do not show up in either Finder or Disk Utility. When the Mac-dead 2 GB Lexar is plugged into either computer and I launch Disk Utility, the initial scan for drives never finishes so I have to force quit. (When they are working, on the iMac the large drives only appear in Finder if I go to User and press Command-uparrow (to go up a directory layer) - in columns display mode nothing appears in the left-hand column.
    (The following describes a set of problems I've had a little longer and which may or may not be related):
    At times the Finder loses some but not all functions:
    1) Sometimes files in the Trash can't be ejected* even when all apps are turned off
    2) usually when problem 1) is observed, no keyboard commands work: nothing happens when pressing Command-W, Command-uparrow or Command-N to open a new window. Text typed will not be entered to change filenames (but this can still be done by typing the desired text in TextEdit, copying there and selecting and pasting with mouse commands.)
    <* I have downloaded an app for forcing file deletion, but haven't really needed it - the delete option and keyboard commands all return after shutdown and reboot, and there's usually enough annoying stuff going on by this time that that seems the best thing to do.>
    Things which I've tried to fix it with so far (not in this order):
    - blowing dust out of the back with canned air
    - checking temperatures - CPU/GPU showing 72/73, HD bay 51, etc.
    - fixing permissions from normal boot
    - boot from install disk and running extended hardware test (no problems found during scans repeated several times during the past month)
    - fixing permissions and running Disk First Aid from install disk boot
    - getting files off the hard drive (was as low as 3 GB free space, currently ~ 35 GB and climbing)
    - clearing PRAM
    - resetting system manager (name? - hold down power button when reconnecting power cable, etc.)
    - Power Saver display and computer auto sleep are shut off (both on "never" - I regularly put it to sleep manually)
    - virus scans (Clam XAV)
    I realize that this is a kitchen sink collection of symptoms, but these things may be related and if so, OS developers may want to be sure these problems are avoided in current versions. (Yes I will upgrade my OS soon...)

    Thanks for checking in, Miriam - sorry to get testy about it.
    The iMac's RAM is maxed out (2.5 GB)
    Yes, the system log does report overtemp message to Power management prior to shutdown (today's log at end of post)
    Where do I find normal temperatures for the system? What are the important parameters to watch and what sort of fixes are possible?
    iStat currently shows:
    HD 54° CPU 67° GPU 72° Incoming air 38° (???)
    HD bay 54° GPU ambient 71° opt drive 49°
    ==========================================
    Console.log was largely full of stuff about a bad flash drive I stuck in as a Hail Mary and failure of communication with a scanner (old HP, driver package installs a program which starts at launch which doesn't show up under Startup Items. Apparently the permission got mislaid, so I fixed permissions and this seems OK now. (Only included that because some of it shows up in System.log and it's not worth focusing on.)
    [That all said, there is a software/OS component to the problem and it is graphics-related. The other night I was looking at some flash videos in a series and one in particular repeatedly caused shutdown, while others played normally: domain = jebhost.com /youtube/list.php?q=Henry+8.o&Submit=GO "The Tricycle Thief" only played through once out of about six tries.]
    =========================================
    System Log Aug 1 (last addition 20 minutes ago)
    Aug 1 14:52:46 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
    Aug 1 17:07:42 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
    Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x46c34c0)
    Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
    Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x3827ec0)
    Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
    Aug 1 17:38:33 gerda-kilgores-imac-g5 kernel[0]: disk1s1: I/O error.
    Aug 1 17:38:33 gerda-kilgores-imac-g5 diskarbitrationd[40]: unable to repair /dev/disk1s1 (status code 0x00000008).
    Aug 1 17:38:41 gerda-kilgores-imac-g5 kernel[0]: USBF: 31965.839 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.868 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.901 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31967. 23 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:38:49 gerda-kilgores-imac-g5 kernel[0]: USBF: 31973.868 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
    Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31977.938 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31978. 2 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.506 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.571 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.264 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.329 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 31 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 64 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986.187 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.712 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.774 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:03 gerda-kilgores-imac-g5 kernel[0]: USBF: 31988.139 IOUSBCompositeDriver[0x46bea00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989. 55 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.178 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.204 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.479 IOUSBCompositeDriver[0x46bec00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.455 ControlTransaction: control packet 1 error 0xe0004057
    Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.503 IOUSBCompositeDriver[0x36cb380](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
    Aug 1 17:49:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Aug 1 17:49:08 localhost lookupd[43]: lookupd (version 369.8) starting - Sun Aug 1 17:49:08 2010
    Aug 1 17:49:08 localhost kernel[0]: vmpagebootstrap: 633665 free pages
    Aug 1 17:49:08 localhost memberd[41]: memberd starting up
    Aug 1 17:49:08 localhost kernel[0]: migtable_maxdispl = 70
    Aug 1 17:49:08 localhost kernel[0]: 92 prelinked modules
    Aug 1 17:49:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Aug 1 17:49:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Aug 1 17:49:08 localhost kernel[0]: using 6553 buffer headers and 4096 cluster IO buffer headers
    Aug 1 17:49:08 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
    Aug 1 17:49:08 localhost kernel[0]: DART enabled
    Aug 1 17:49:08 localhost kernel[0]: USB caused wake event (EHCI)
    Aug 1 17:49:08 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe261dcc; max speed s400.
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::probe:
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
    Aug 1 17:49:08 localhost kernel[0]: Security auditing service present
    Aug 1 17:49:08 localhost kernel[0]: BSM auditing present
    Aug 1 17:49:08 localhost kernel[0]: disabled
    Aug 1 17:49:08 localhost kernel[0]: rooting via boot-uuid from /chosen: D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B
    Aug 1 17:49:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Aug 1 17:49:08 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40MVB1 Media/IOApplePartitionScheme/Untitled 3@3
    Aug 1 17:49:08 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Aug 1 17:49:08 localhost kernel[0]: jnl: replay_journal: from: 2051072 to: 8100352 (joffset 0xa701000)
    Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
    Aug 1 17:49:08 localhost kernel[0]: AppleSMU -- shutdown cause = 3
    Aug 1 17:49:08 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0092, SPU vers = 0x56, SDB vers = 0x01,
    Aug 1 17:49:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
    Aug 1 17:49:08 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
    Aug 1 17:49:08 localhost kernel[0]: Jettisoning kernel linker.
    Aug 1 17:49:08 localhost kernel[0]: Resetting IOCatalogue.
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 0
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
    Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
    Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
    Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
    Aug 1 17:49:08 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Aug 1 17:49:08 localhost DirectoryService[46]: Launched version 2.1 (v353.6)
    Aug 1 17:49:09 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:26:1d:cc
    Aug 1 17:49:09 localhost diskarbitrationd[40]: disk0s3 hfs D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B HiMac /
    Aug 1 17:49:09 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:14:51:7e:85:c0
    Aug 1 17:49:09 localhost launchd: Server 3507 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
    Aug 1 17:49:10 localhost usbmuxd[36]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
    Aug 1 17:49:10 localhost lookupd[63]: lookupd (version 369.8) starting - Sun Aug 1 17:49:10 2010
    Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
    Aug 1 17:49:10 localhost configd[38]: initCardWithStoredPrefs failed.
    Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
    Aug 1 17:49:11 localhost kernel[0]: Registering For 802.11 Events
    Aug 1 17:49:11 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
    Aug 1 17:49:12 localhost mDNSResponder: Adding browse domain local.
    Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
    Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000]
    Aug 1 17:49:13 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Aug 1 17:49:14 localhost loginwindow[67]: Login Window Started Security Agent
    Aug 1 17:49:18 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
    Aug 1 17:49:20 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
    Aug 1 17:49:20 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 17:49:23 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
    Aug 1 17:49:23 gerda-kilgores-imac-g5 lookupd[119]: lookupd (version 369.8) starting - Sun Aug 1 17:49:23 2010
    Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
    Aug 1 17:49:26 gerda-kilgores-imac-g5 configd[38]: target=enable-network: disabled
    Aug 1 17:49:27 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
    Aug 1 17:49:29 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.
    Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::init(0x3587f00)
    Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::free()
    Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: IOSMUPwrController:: OverTemp notification
    Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
    Aug 1 18:28:21 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
    Aug 1 18:28:21 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[119]: exited abnormally: Hangup
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown
    Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown complete
    Aug 1 18:28:21 gerda-kilgores-imac-g5 /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
    Aug 1 18:28:21 gerda-kilgores-imac-g5 lookupd[240]: lookupd (version 369.8) starting - Sun Aug 1 18:28:21 2010
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Sleep
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Wake
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: Wake event 0020
    Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: USB caused wake event (EHCI)
    Aug 1 18:28:26 gerda-kilgores-imac-g5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    Aug 1 18:28:32 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
    Aug 1 18:28:32 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
    Aug 1 18:28:35 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[240]: exited abnormally: Hangup
    Aug 1 18:28:35 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
    Aug 1 18:28:35 gerda-kilgores-imac-g5 lookupd[249]: lookupd (version 369.8) starting - Sun Aug 1 18:28:35 2010
    Aug 1 18:28:36 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
    Aug 1 18:28:37 gerda-kilgores-imac-g5 mDNSResponder: Repeated transitions for interface en1 (192.168.1.2); delaying packets by 5 seconds
    Aug 1 18:28:38 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
    Aug 1 18:28:41 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.

  • Issue w/external drive that was once an internal main drive

    I recently replaced the hard drive in my Powerbook G4 and planned to use the previous hard drive as an external drive, but I’m having difficulty with the drive being recognized. All the external case does is blink. Doesn't even whirl. I’ve used Disk Utility with no luck, but when I plug the drive into a Windows machine it does physically recognize the drive, it just can’t read it (likely due to having OS installed). Do I need to set the jumpers to slave on the old drive for it to be recognized on the Powerbook? Is there an issue with both the internal and external drives both having Mac OS installed?
    Thanks in advance for the help!
    -David

    Assuming you put the drive into a bus-powered USB enclosure, the problem is that your Powerbook, like most or all PB G4s, doesn't put out enough power via the USB port to operate the drive fully. It will spin, but the heads won't move. There are four remedies:
    1. Use a USB "Y" cable that enables the drive to draw power from two USB ports instead of just one. Here is one example.
    2. Connect an AC adapter to the drive to power it, if it has a port for one.
    3. Connect an AC-powered USB hub to the computer, and connect the drive to the hub.
    4. Replace the USB enclosure with a FireWire enclosure and connect the drive to your FireWire port, which provides more power than the USB ports do.

  • Networking issues following upgrade to 10.5.8 when iMac wakes from sleep

    Hello,
    I recently upgraded to 10.5.8 and I'm now experiencing issues with network connectivity following the iMac waking from sleep. I have to stop Airport and then start it again to resolve the issue.
    Can you provide any resolutions to this or advice?
    Many Thanks,
    Sam

    Reinstall the Mac OS X 10.5.8 Combo Update because the Combo seems to help a lot of people when a Delta upgrade doesn't take right.

  • Issues with external drive on Mac Mini / Lion

    I'm using an external SATA drive in a Newer Technologies Voyager dock (which I like to call the "toaster") with a brand new Mac Mini i5 2.3G via FW800.
    The drive was formatted using Disk Utility on a G4 running Tiger (10.4.11)
    With the drive mounted, the Mini's performance seems to slow down, and it randomly dismounts the drive, with the usual warning, "you disconnected your drive without dismounting it first, bla bla...)
    I think I remember when Leopard was new, there was a firmware issue that had to be dealt with, and when moving drives from OS 9 to X and back to 9, I lost access to the data on the drive.
    I'm also aware of the partitioning scheme difference when formatting drives for use on the Intel machines.
    Could either of the above have anything to do with the problem I'm having here?

    I'm not an expert in this, but as far as I know, GUID only comes into play if you want to boot from it, but...... you never know, it could - here is an excerpt from Disk Utility:
    If you’ll be using the disk only with Mac computers, choose GUID Partition Table.
    Another thought is: how old is that drive? All hard drives fail sooner or later - have you tried to check it with Disk Utility or something like Disk Warrior?

  • FireWire issues with external drive in Yosemite

    I have just upgraded to OS X Yosemite, and I have an annoying problem with my 500GB FireWire external drive (which I use for Time Machine backups).
    Basically, after updating the drive won't show up anymore, neither in the Finder nor in the Disk Utility. I also tried the "diskutil list" command in the Terminal, but it is nowhere to be found. Note that the drive does indeed receive power from the port - it spins - and when I look into System Report --> Hardware --> FireWire it does show up there (but I can't mount it). Furthermore, if I use a USB cable to connect the drive everything works fine, so the disk itself seems to be OK.
    The funny thing is that if I boot with the drive plugged in the FireWire port the system mounts it normally. But as soon as I eject the drive, I am unable to mount it again (unless I switch to the USB cable, as mentioned above).
    Prior to the update, everything worked flawlessly. For now, I backed up my Mac via USB 2.0, but it's very slow and I definitely don't want to resort to this workaround everytime. And it goes without saying that I don't like having issues with my primary backup device in general.
    I already did all the usual troubleshooting (rebooting, resetting NVRAM and SMC, ...), but the problem still persists.
    Any suggestion?

    I had the same issue on a rMBP 13'', brand new 2015 March.
    Two thunderbolt adapter connected: one for ethernet, one for firewire Lacie drive.
    and...
    even after taking the ext. Firewire on the Spotlight exclude list, and also after disabling sleeping hard drives, I always got the issue.
    Until I realized that touching the laptop or moving the screen was immediately leading to disconnection.
    Then I exchanged the thunderbolt connectors, and now it is stable and does not disconnect again.
    ??? Maybe one of the ports is more "delicate" than the other?
    Big hardware weakness here...

  • Why does OSX 10.9 Mavericks try to log me out when it goes to sleep?

    After I wake my Mac from sleep it displays a message saying that it couldn't log out because one or more of my Adobe apps or Quickbooks app that were open couldn't close properly. I don't want them to close, nor do I want the machine to log out every time it goes to sleep. Any ideas for a solution?
    Thanks!

    Ok. Finally found it. In System Preferences > Security & Privacy : General - Click on the Advanced button in the bottom right and you will get these options. Uncheck the "Log out after __ minutes of inactivity" and I think that solved my issue. Thanks again VikingOSX

  • USB issues with External Drive

    I am running a 1 TB Fantom drive (MDC1000) (2 Partitions) on new OS 10.5.6 MacPro via one of the back USB ports. Been using the drive for over a year with no problems.
    Now intermittent issue with mounting drive. After successfully mounting and letting the drive cycle down, the USB2 connection disconnects when the drive starts back up again. I receive the Device Removal Message, then the drive tries to remount. Then I receive the message again. What is strange is that the drive seems to work fine when data is being accessed consistently.
    I clicked off the "put the hard disc to sleep" checkbox in the Energy Saver preference which seemed to stabilize the intermittent problem, but now there is an issue with the machine not coming out of sleep, and I get the startup clock icon when I try to restart. The machine does not shut down with the USB connected.
    I'm still trying to determine if it's the drive or the machine. I ran the disc utility and repaired the disc as the intermittent disconnections seem to corrupt the trees and directories. I am able to fix them. Is there any utility for testing the USB ports? There should BE.
    Could this be due to a recent update? Or lack of firmware update from the drive manufacturer? Seemed to come out of nowhere.
    Thanks for any info.
    Message was edited by: jfc999

    Just to follow up with this for anyone has a similar problem.
    Tried new cables and seemed better for a short time, but then still would not mount successfully.
    I called Micronet after I didn't hear back via their email form. The tech there seemed to suspect it was the power connection on the network card in the drive which would make some sense. He confirmed there were no firmware upgrades for the Fantom drive.
    Also tried to mount the drive unsuccessfully via Firewire and it did not work.
    So my conclusion is that it's not the drive mechanism but the network card in the drive. I have a sinking suspicion that there is a power issue in my office space, which may have affected the drive. I've had other machines and devices which have had power issues in the past.
    Does anyone know any simple and easy way to test electrical integrity in a work/office environment?
    I bought another 2tb drive, transferred the data and reformatted the old drive to see if that does anything.

  • HT6030 Mail on Maverick is working on and off - one day problems with Smtp than this works and Imap is not working  and then all works for a day and then nothing works - advice?

    Mail on Maverick is very problematic since latest upgrade. One day it works other day it doesn't, especially with gmail. I don't change any settings but one day it will work and the other it will not. What give? All updates are installed....

    Hi Paweltu!
    Here’s an article that will help you troubleshoot this issue with your Mail program:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Directory Issues on External Drive?

    I have a Mercury Elite Pro 160GB external drive, and sometimes it won't mount. Disk Utility and DiskWarrior say there's no problem.
    If there's corruption, does using Disk Utility to erase the drive also rewrite a new Directory? A Mac tech told me that only Repartitioning will truly delete/write a new Directory. Don't know if that's true.
    The drive won't mount half the time. I've erased it twice. I ran the Drive Genius thirty-minute hardware test; the drive looked okay.
    What's the real story on Directory corruption? Thanks.

    Along the hardware lines, it would also help to know with what kind of computer you are using this (generally helpful for any question asked here).
    Before you return it I would suggest checking things like the cable (as BDaqua suggested), that your board and connections are secure. Are you plugging this directly into the computer or daisychaining?
    Message was edited by: Limnos

Maybe you are looking for