Mavericks 10.9.2 Internet sharing prob after updgrade from 10.6.8, any solutions?

Hello World!
Here I am going to tell you my woe story which is, I finally decided to upgrade to 10.9.2 from my a little worn 10.6.8, and was very happy with a choice until stumbled upon the complete failure with establishing the Internet sharing for surrounded devices with wi-fi interfaces. Just the way it does just perfectly with 10.6.8!
Actually the network interface appears to be started but connected devices are no longer available to espablish any conection with it.
I never had deleted nothing, or changed a something tricky, I am not ageek at all.
Please help?

Same here from 10.9.1 to 10.9.2 internet sharing using WiFi won't work. I can see the little upper arrow flashing then it seems to be looking to connect over wifi instead of sharing it.

Similar Messages

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Did it work in Firefox 4, or did you skip that version?

HT204135 I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

Thanks Paul.
I'm connected by USB cable. Tried looking for a Brother driver download but they do not provide one for this printer.
If I delete all listed printers for the purpose of then doing a reset, will I not lose them all - as there is seemingly no appropriate driver - and finish worse off than I currently am?
Regards
Ephry

Nokia 520- Internet Sharing Issue After WinPhone 8...

I recently updated my Lumia 520 (AT&T) to WinPhone 8.1 OS. Since the update was installed, I am unable to turn on my internet sharing (mobile hotspot). I receive the following message on the screen, "Connect not shared. To enable tethering on this device, go to att.com/mywireless or dial 611." I have spoken with AT&T technical support on several occasions and they do not see an issue with my plan. I also have a second device (another Lumia 520) on my plan that was currently running WinPhone 8.0 and successfully sharing internet as a mobile hotspot. Today, I manually updated the OS on that device to WinPhone 8.1 and as expected, the internet sharing functionality stopped working after the update.
I have looked through various message boards and posts related to similar issues, however I cannot find one that is directly attributed to the WinPhone 8.1 update.
Any ideas or assistance would be greatly appreciated.

Thanks Abi99
After I pulled the battery to get the product code, the error message when I try to start ICS changed to: Connection not Shared. Internet sharing isn't currently available
I am still on AT&T. However, I ported the number (not the device) out to T-mob and then back to AT&T 3 weeks later. I used the 520 on WiFi in the interim 3 weeks, and during this time, it received the 8.1 update notification, and I installed 8.1.
Which connection profile is choosen in Lumia » menu » settings » celluar+SIM » SIM settings?
Active network: AT&T
Data Connection: On
Don't Roam
SIM Settings: SIM
No data under APN settings (all fields empty)
add internet APN » APN wap.cingular » save » power off » power on: Does it work?
Tried, doesn't work
add internet APN » APN phone » save » power off » power on: Does it work?
Tried, doesn't work. But after this change, the error messgae goes back to the original one:
Connection not shared. To enabled tethering on this device go to ; http ~ or dila 611

Firewire Internet Sharing Probs

Hi, looking for help to resolve the following issue: On my Firewire connected cpu, I can't get past the "You are not connected to the internet." dialog in Safari. Reaching the conclusion that one or more of my settings are incorrect.
1st). 24" iMac w/ 10.5.1; connected to Cable modem via Ethernet
(there is a 5-port switch prior to this cpu)
Sharing > Internet Sharing (Firewire) - ON
Network > Ethernet > Manually; IP Address: 69.92.45.xxx - Subnet: 255.255.252.0
Router: 69.92.xx.x
2nd). Dual 1 GHz Quicksilver w/ 10.4.11; connected to 1st cpu via Firewire
Sharing > Internet Sharing (Firewire) - OFF
Network > Ethernet > Manually; IP Address: 69.92.45.(same as above *plus 1*)
Subnet: 255.255.252.0 - Router: 69.92.(same as above)
I can see & browse files within Network > Servers yet, I'm not able to access the internet.
Might anyone have a suggestion for this prob? I have searched for the answers w/ no concise results.
Thank you for any help,
Sim

simoom,
I'm surprised you're getting anything, on either computer. Let's see if we can't get you straightened out.
First, computer #1 needs to get its IP address via DHCP, not manually (unless your ISP has told you otherwise; not very common). Plus, it would be a good idea to get rid of the switch. A switch is OK if it is downstream of a router, which itself acts as an internal DHCP server, but not when connected directly to a modem.
So, computer #1 should be connected directly to the modem. It will talk directly to your ISP's DHCP server and acquire an IP address. It would appear that the Firewire Sharing is set up properly, so this should be fine once an IP address is nailed down.
Second, computer #2 needs to gain an IP address the same way: via DHCP. When computer #1 has Internet Sharing turned on, it acts just a router would, issuing "private" IP addresses to the connected computer(s), then acting as a NAT router. On computer #2, configure a Firewire network port, and set it to look for an IP address via DHCP.
Scott

After upgrading to 6.1.3 battery drains fast. Moreover initial charging takes more time to change battery indicator from red to green. any solution ?

After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?

Anyone?
Thinking I'm S.O.L at this point.

Windows 7 Pro can't see Internet IP's after recovery from having WGA invalidate OEM license

My Win 7 Pro receives an IP, can ping local IPs, can see right up to the internal router IP but cannot see the internet. Yes the network functions for other PCs.
Important historical data:
Some weeks ago my spare admin pc was rebooting after the usual monthly WAU when it failed to complete the last stages of installation of the updates (this would have been June 2014 updates.) Instead of booting normally to Windows, the system ran a bunch
of registry change attempts and then booted to a black Windows desktop that contained the dreaded "You're a filthy pirate" message that Microsoft so gently slaps onto newly discovered Winhacks. The trouble is my Gigabyte/AMD powered barebones box
was purchased, by ME, from TigerDirect.ca WITH an OEM Windows 7 Pro bundle. Now I should point out that I have suspected the Seagate Barracuda that was included with this machine as being a little off as the machine would occasionally freeze up or reboot itself.
Instead of putting up with this HDD any longer, I ghosted the fractured build off of the Seagate and onto a new WD Caviar Black. On first boot the system seemed to work but the "pirate" message was still there. I then attempted to go through the
recovery wizard and fix my license issue. The wizard failed and advised that the installation was corrupt and that I should reinstall. I reinstalled (not scratch installed) Windows and was rewarded by a successful install minus the activation. I proceeded
to phone the MS automated attendant and successfully activated my installation. I have a functioning network card but can only see LAN stuff. What the deuce? Gigabyte GA-M68MT-S2 with AMD Phenom II X6 1045T.

You can try this:
From administrative account, go to start, type cmd, press Ctrl+Shift+Enter. Click Yes, if UACD prompots. Now, type the following command and restart the PC:
netsh winsock reset
After restart, check internet connectivity.
Balaji Kundalam

Cannot connect to internet with Huawei after upgrade from 10.7.4 to 10.7.5

I have an iMac which came with os X 10.7.4.When I installed my Huawei E303 data card, I was able toconnect to the internet.
After upgrading to 10.7.5 the system appears toconnect and I can text, but there is nointernet connectivity.
Thanks for any advice

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Is anyone having Web Sharing issues after switching from 10.6 to Mountain Lion?

I want to upgrade to Mountain Lion from Snow Leopard (10.6.8) but I wanted to see if anyone is experiencing any issues with their Web Sharing after making the switch. I use Web Sharing daily to build and test web sites for my clients and when I made the switch to 10.6 none of my database driven sites worked. Ultimately I had to install a new version of PHP 5 because 10.6 came with and older version. And I had to reinstall SQL for my databases along with some other related items. It wasn't a major problem but it took a couple of days to track down the issue. Anyone seen any weirdness like that with Mountain Lion?

Web sharing is absent in Mountain Lion. Apple removed the feature. There're some unofficial hacks to bring it back, search the forums.

Internet connection problem after migrating from Powerbook G4

After starting up my friend's new Macbook 2ghz for the first time, I migrated everything from his old Powerbook G4. However on starting the machine for the first time, although the Internet Status suggested his Airport connection to his Netgear router was working and that he was connected to the Internet, this was not the case, as the registration info could not be sent to Apple, the time/date wouldn't update and he could not browse or check e-mail.
Initially it occurred to me that perhaps the Netgear router didn't like the fact that the same Network settings (IP address) had been given to the Macbook when it had a different MAC address. However this didn't seem to be the case as I was able to add the new Macbook to the list of trusted devices and turn on Access Control, but this still didn't work
Eventually when I turned off the security settings, so that the password was set to "none", instead of WPA/PSK and then did likewise for the named network on the computer, I was able to get online at long last
However I don't want to leave the wi-fi system without any password protection for obvious reasons. His Netgear router is a newer model than mine and it had a choice of WPA2, and when I tried this and did likewise on the Macbook it was still working. Yet the matter gets more complicated as he also has a PC on the same wi-fi network and this would not accept the WPA2 setting on the router and I could not get online with the PC
I dont understand why WPA2 worked on the Macbook but WPA didn't and I need to find a password setting that works for both computers. I don't really understand the WEP option as the encryption choices are 64 and 128 but there's no 64 on the Macbook. More importantly I don't have the foggiest how to get a desired password, as when you put in a "passphrase' and click "generate" the router produces four different keys which are all decidedly impossible to remember and so totally impractical if you need to use these to log on.
I appreciate that this is a bit of a confusing query but if anyone can offer any assistance., I would be extremely grateful, as after all the time it took me today to suss out actually getting his new Macbook online, I am loathe to mess around without really knowing what I am doing and so I need to find a security option that can be used by the Macbook, his older Powerbook and a PC running Windows XP
With my utmost thanks in advance for any help you can offer, but please bear in mind I'm a bit of a techno-nincompoop so please be gentle with me
Many thanks
Bernard

Thanks a million for bothering to reply, it's very much appreciated. I rarely seem to get much success when I try searching in Apple support but I guess that must be because I choose the wrong search terms.
Since all the equipment is relatively new and quite high spec, I believe I should be able to use the WPA format and it's a matter of finding an arrangement that works with both the PC and the Macs. What I don't understand is why the Macbook appeared to be connected to the internet with a WPA password, but wouldn't in fact get online, until I either changed to no password, or to WPA2?
However I'm extremely grateful to you because those docs all proved well worth reading, if only so I might understand some of the technical gobbledigook (the avoidance of which was one of the principal reasons I became a Mac evangelist in the first place), as the whole password encryption thing has always been a complete mystery to me, hence for my own wi-fi set-up, I long ago settled for hiding the network and turning on the trusted devices access control, just to avoid having to deal with any of this technobabble. However my mate wants people to be able to log on to his network if they turn up with a laptop, but at the same time prevent totally open access to his internet connection to all and sundry, so this is not an option.
What really bugs me is that the interface for the Netgear modem/router (and any other router I've had experience with) never seems to work properly on an Apple, no matter what browser I use and having sold his family on the whole Apple experience, it's usually a bit embarrassing to have to squeeze my mercifully narrow backside into a baby's chair in order to use their PC to resolve any router issues (as the PC is only there for the kids to play games). But invariably it's only by using the browser interface on the PC that all the various options seem to work
Again much appreciate you going to the bother and the fact that there is relevant stuff in the support library leads me to believe I should attempt to find some more details which might resolve the WPA difficulties I've experienced with the new Macbook.
Meanwhile, although I am not so keen on the new glossy screen on the Macbook (I'm amazed you can't have the option of a matt one unless you get a bigger Macbook Pro), you've no idea how envious I am having to set up his new toy when I can't afford one myself. Mind you, the last time I told this bloke that if he wanted decent support for his iPod, he'd have to buy me one, he returned from the US with a 60gb model to match his (sadly pre-video iPods), so perhaps I should make matters more complicated by installing Boot Camp and Windows, so that I have to tell him that I can't offer support over the phone without one of my own
Kind Regards
Bernard
Macbook 13" 2ghz" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)

Wireless internet speeds slower after upgrading from 10/2 to 50/25?? Using olders revision Mi424WR.

We have been using the oldest version/revision of the Actiontec Mi424WR router provided by verizon for 3+ years. Recently we upgraded from an outdated 10/2 internet plan to our current 50/25 wireless plan. The speeds when wired are fantastic, but with wireless, on multiple computers the speed even right next to the router hovers at about 10mbps. I understand about the degradation and limit of wireless signals, but we should absolutely be getting higher download speeds than 10mbps(~1Mb/s). On our older 10/2 mbps plan our devices were receiving consistant download speeds of higher than we are getting now, maxing out at 1.6Mb/s usually. The only change that has been made recently is we reset the router to fatory settings, leading me to believe that wireless settings that were in place before are no longer there and throttling wireless speeds. I do not expect to get the full 50+ mbps speed that I am getting from wired, but I do expect my wireless speeds to be consistent with our upgraded plan(let alone slower than our massively slower old plan). Any thoughts or help would be greatly appreciated, thanks!

You should definetely get better speeds even with an older router, upto about 20 or so.
If that works for you, then it's probably just a little wireless interference.
you can change that in the router. open a browser, and go to http://192.168.1.1
user name is admin. and the password is most likely the serial number found on the service tag of your VZ router unless you changed it. Once you login succesfully, go to the top and hit wireless, then on the left basic security. then go to option 3 which is channel 1, 6 and 11 and are the only channels you should try.
So it will likely be set to auto, change it to 11 and put the check for keep settings even after reboot (Directly under the channel) and then hit apply. after you hit apply, test your connection out, if you notice a difference, leave it like that until the problem happens again, and if it happens again, go back into the router, and try channel 6, test it out. and then finally 1 if the first two don't work.
Also take a look at page 2 of Actiontec's Wireless PDF File. It gives you some idea's with regards to position and orientation of where the router sits and how it can best be positioned for maximum coverage.
http://support.actiontec.com/doc_files/MI424WR_Rev(all)_Wireless_Networking_Guide.pdf

Some probs. after migration from 4.5 to 6i

Hi,
I have converted full application
which was in forms4.5, Reports 2.5 to
Forms6.0 and Reports 6.0.
Conversion was cool and my full application
is working fine.
but i got some probs.
1. file size of new fmb, fmx, mmb, mmx, pll and rdf
are much more bigger then the original. in
some cases it almost 3 to 4 times.
2. If i run any report first time its working.
but if i run report again then its giving me Dr. watson.
in file RWRBE60.exe but if i close report background engine
then its working.
here i dont want to pass oracle_shutdown with value yes.
in that case it will work.
anybody has some idea. What could be the reason.
Thanx
Mehul
null

hello
i have convert my forms3 into forms 6i and some fix format if you have than i give you
doc and one fix to convert all forms and you just change some graphics prob.
if you need then post message

10.9.4 update causing internet browsing errors after wake from sleep

Macbook Pro Late 2011, OS X 10.9.4
So before the 10.9.4 update, I had no problems with Wifi and wake from sleep.
Now, after the update, random web pages either don't load (Chrome & Firefox) or return a "Memory Not Allocated" error (Safari). Also, my Work VPN application stops being able to connect. The related Console error is:
acvpnagent[104]: Function: getInterfaces File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1277 missing PPP destination address for interface "utun0"
The only solution I've found is restarting.
Any ideas?

Remove the Cisco VPN client. Use the built-in client, if possible.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Wi-fi internet connection problem after waking from sleep

hi, i have a macbook pro 5,4 running 10.6.8 OS and i have a wireless issue. whenever the laptop is awkoen from sleep it will take about ~60 seconds to connect to the internet. The wifi indicates that it is connected to my home wifi almost immediately but there is just no internet. Google chrome reports that it is sending a request or redirecting in which it eventually fails to load page. this is very annoying having to wait a minute for my internet to work. i have tried downgrading my wireless card driver/extension to older 10.6.4 as i read there was a wireless issue from 10.6.5 up, but this did not fix the problem. i have also tried changing channels and settings on wireless router with no effect. i do not have any connection issues once the internet connection is established. please help. thanks!

Have you tried it with a different mouse? I'm no expert, but you might want to find out, if the problem is mouse-specific.

ITunes says a newer version of software (4.3.3) is available. However, when I download it it gives me an error message after the download is complete. Any solutions?

When I sync my iPhone 4 with iTunes it says that a newer version of software (4.3.3) is available. However, after it appears to download the software I get an error message that the server timed out. What's happening?

This is asked and answered here many times each day. You can do a forum search ( right side of this page).
Disable your firewall/security software and try again.

Mavericks 10.9.2 Internet sharing prob after updgrade from 10.6.8, any solutions?

Similar Messages

Maybe you are looking for