Mavericks After Upgrading to 10.9.2 the font size in the address/seach bar has changed to be small.

After upgrading to Mavericks 10.9.2 the text in the address/seach bar on Safari is a lot smaller.  This is not a screen resolution issue. The fonts in Finder are larger than they were before anoying fix for this would also be nice. It is also not a screen resolution issue.
I really do not know what Apple are doing with quality control with Mavericks.   The 3 month GMAIL problems have not been fixed with this upgrade and you also have a lot of font size changes accross you whole machine, within mail, finder and safari.
Any help appreciated.
Mark
Message to Apple: 
Mavericks reminds me of all the old problems I had with Windows before I moved to Mac. Prior to Mavericks upgrades would not change screen resolutions, Font sizes etc.   The GMAIL issue has not been fixed.
It is inconceivable to me that you could release this product which does not support basic mail functionality for one of the largest email services on the internet ie. GMAIL and then take 3-4 months and still not fixed with the 10.9.2 upgrade. What are you guys doing. The loss of productivity for people is beyond comprehension.
Can we please get a fix for GMAIL in Mavericks that actually works.

avjebs wrote:
I got this e-mail from WD a few days ago:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
THIS is very disturbing news from WD.

Similar Messages

  • After upgrading to OSX Mountain Lion the movie preview app has disappeared.  Anyone know why?

    The movie preview app that had a red chair as an icon has disappeared from my tool bar after upgrading to Mountain Lion.  Does anyone know why this happened?

    You might try Movist I can't personally recommend it.
    I never used Front Row feature, myself.

  • After upgrading to APEX 4.1 the database management GUI has been removed

    I've succesfully upgrated to APEX 4.1 on my database 10gXE
    The only problem is that now the database management GUI (Usage Monitor section) has been removed from APEX and I'd like to keep on dealing with DBA activities as before. How is it possibile? Now can I handle DBA activities only by using SQL*Plus and SQL Developer?
    Thanks!

    Hello Mark,
    unfortunately, that management GUI is an XE specific application build into the APEX version that shipped with XE. So basically, what you experience is correct: After an APEX upgrade, you can't use it anymore, because the "generic" APEX versions are not branded for XE.
    There is a theoretic possibility of using the command line exporter to export that management application from the old APEX instance before upgrading (or using a different XE instance that still has it) and import it to the upgraded APEX instance. But I would not recommend to do that, as APEX itself has changed a lot from the 2.2-branch that XE 10.2 shipped with to the 4.1 you use now. This can cause severe issues when using that application in 4.1, especially concerning the APEX management part of that application.
    Now can I handle DBA activities only by using SQL*Plus and SQL Developer?I'd recommend that. And I really think SQL Developer has become very handy for that purpose compared with the version that was out when XE 10.2 was released...
    -Udo

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • After upgrading to iOS 8.3, the keyboard has frozen up  and I can no longer text or access my contacts.  I've re-booted the phone several times, to no avail.

      After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts.  I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android.  Can anyone help or have the same issues?

    Im having the same problem. This started with iOS 8 and Yosemite. Im in a group message with 10 people with and without iPhones. Currently have 9 threads and when ever a new person responds a new thread forms. they all have the same people but in a different order, that may be part of the reason why iMessage doesn't recognize them as the same conversation.
    As I'm writing this post 3 new threads opened and other people with and without iPhones are mentioning the same problem
    hope apple can fix this. VERY annoying

  • HT4528 after upgrading to IOS 7.1 the camera on my 5s no longer works

    after upgrading to IOS 7.1 the camera on my 5s no longer works.  Prior to the upgrade, I had no issues with the camera

    Hi JoieC,
    If you are having issues with the camera on your iPhone after a recent update, you may find the Camera troubleshooting portion of the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    - Brenden

  • After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    Go to the App Stor and download an app- any free app will do, it doesn't matter.
    Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
    And no, you don't have to keep that free one you just downloaded.  You can delete it if you don't want it.

  • After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
    I wonder if there is a broken .plist file that may be fixed ...?

  • After upgrading to iOs 5.1 the AV composite cable don't work, appear a message: the device is not compatible with iPad2, anyone else had this problem or have a solution for it?

    After upgrading to iOs 5.1 the AV composite cable don't work, appear a message: the device is not compatible with iPad2, anyone else had this problem or have a solution for it?

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
    If that does not work, restore the iPad to the factory settings.

  • After upgrading to iOS 5.1, the sound output works abnormally.

    After upgrading to iOS 5.1, the sound output (the 3.5mm output) works correctly only when Apple provided headphones or certain headphones are plugged in. Others cause the iPod to produce sort of phased out sound with lots of digital, low-quality sounding artifacts. Other headphones have no problems since they work fine when plugged into my MacBook.
    Anyone having similar problems? Solutions?

    Could be due to a defective headhone jack in the iPod that just coinsided with the iOS update.
    However, to rule out a software cause, try the following.
    - Reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • After upgrading my ipad to ios7, the block cookies setting only has one choice: "always."

    After upgrading my ipad to ios7, the "block cookies" setting for Safari only has only one choice: "always."  No option exists for "never block" or "allow third parties."  Needless to say, this stops me from visiting a variety of websites.   Any ideas on how to get those other options to display?

    I met this question in a iPhone touch, at last we found the device was controlled by MDM profile before upgrade. After removing the Configuration Profiles in [Generals][Profiles], another two option display.

  • After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape?

    After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape? How do I change it
    .I have gone to Settings and rotation lock, does not change it and also to Control Panel with the same result?

    Do you have a toggle switch on the side of your ipad, next to the volume? If so, try that.......it took awhile for me to find that answer by googling.......hope it works for you.

  • After upgrading to OS 10.10 some fonts appear blurry. Specifically top menu bar, desktop icons, mail

    After upgrading to OS 10.10, some fonts appear blurry. Specifically top menu bar, desktop icons, mail and Safari. This only occurs after the computer has been running for awhile, not immediately after startup. I'm running an iMac, 20 inch, Mid-2007 with the following graphics: ATI Radeon HD 2400 XT 128 MB.
    It's not a huge problem, just darn annoying. Thoughts anyone?

    Hi,
    Please note that this upgrade related problem would very likely be what has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    If you also find any files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4, which is clearly the case for you), remove those, also, but never restore those.
    Often this is all that needs to be done, but you might then need to force an overall reindexing via the removal of the Envelope Index. Note the special instructions when forcing the reindexing of IMAP or Exchange accounts in the following:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    This will force the reindexing of all the POP mailboxes and all On My Mac mailboxes. With regard to any IMAP accounts if you have any, the practical result of this action of removing the account folder, is that with the IMAP account still set up in the Preferences, Mail will connect to the IMAP server and create a new account folder, and while doing so will index the messages in the mailbox folders of the IMAP accounts on the server.
    Keep me posted.
    Ernie

  • Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

    is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed.
    my process has been (i am open to suggestions for other free and EASY services/methods):
    garageband : create & edit audio. add 1400x1400 image.
    share to itunes.
    drag file to desktop.
    upload .m4a file to google drive.
    create a link post in wordpress using "podcast" tag & create "podcast" category.
    click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
    i copy this url.
    go to itunes store > then "submit a podcast"
    itunes gives me the error message "we had difficulty downloading episodes from your feed."
    when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
    i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
    still the same error message.
    i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
    wordpress seems to be encapsulating the rss, what am i doing wrong?
    this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

    if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

  • When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

    Question
    When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

    Try some basic troubleshooting.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Maybe you are looking for

  • How to upgrade iTunes 12 BACK to 11?

    So, in every way I can think of, iTunes 12 seems to have wrecked everything good about iTunes . . . . 1) no side bar 2) poor contrast and hard to read 3) haphazard UI with like items arranged in all the wrong places 4) entering meta data is difficult

  • Connector specific error - blackberry bold 9790 - desktop software version 6.1 and outlook 2010

    Hi there I've recently upgraded my business partners' outlook from 2007 to 2010.  In doing so we've had a corrupt profile which we have had to delete and then replace with a new one.  In doing so his outlook started working again but now his blackber

  • Pattern Matching/Encoding

    I have the following code working to identify characters in a string that are not in the ASCII character set. Now I want to do the same thing and compare the string to the Cp1252 character set but regex doesn't seem to have that functionality. I trie

  • Need Help Setting UpWRT54G2 V1.5 In Windows 7

    First I apologize if I put this question in the wrong place. I am having a really hard time setting up the WRT5462 in Windows 7.  The setup disk that came with the router doesn't work. It can never detect the router when it asks to plug the router in

  • New macbook air loads thousands of emails?

    Setting up a new Macbook Air, w/Comcast wifi.  Mac is loading (finding) emails all the way back to 2007!  Over 17,000 emails!  Tried shift scrolling to highlight and delete, but they keep coming back!