Mavericks and Epson printer

I've just bought an Epson WF 7525 to work with my new MacBook Pro (late 2013 model). Due to there being no cd/DVD drive on the laptop and not be able to find any drivers online does anyone have any suggestions on getting the printer up and running?! Thanks.

It's shown as supported:
http://support.apple.com/kb/HT3669
Did you try Software Update?
Or download the entire package here:
http://support.apple.com/kb/DL1398

Similar Messages

  • Mavericks and Epson Printer driver problem

    What is the issue with the Mavericks to Epson Pro Printer driver upgrade which produces the error message: "filter failure?" The result is no printing. After wading through blogs, chat rooms and both Epson and Apple sites, installing and reinstalling components, I found this cryptic Epson post, under FAQ:
    Q: Should I perform Apple's Software Update to get the latest OS X 10.10 printer software for my Epson Pro printer?
    A: No. Do not run the software update; the printer software for your product is only available from the Epson support site.
    Q: Should I remove previous versions of my Epson Pro printer software before I install the OS X 10.10 printer software?
    A: Yes, remove the previous versions of the printer software.
    It truly annoys me that this information is not available when we begin to update drivers and operating systems. My Epson Pro 3880 is now printing perfectly from Lightroom as it should.

    hi Frank,
    I just came across the same problem yesterday trying to get a driver for my Epson Photo R300 printer. It seems that OS 10.3.9 falls between the cracks as far as Epson is concerned - the CD that came with my printer stops at 10.2. and none of the driver downloads on the Epson website exactly fit 10.3.9. But I found a driver nonetheless through a google search and it's working for me now! So far so good anyway. It's at http://www.versiontracker.com/dyn/moreinfo/macosx/15970. Make sure to follow their directions carefully for installing the driver.
    Good luck,
    emma

  • Upgraded to Mavericks and Epson scanner software was quarantined.Powered on the scanner, plugged in the USB, clicked Software Update, and clicked Update for the Epson printer software. Update occurred by I chose "not now" to a dialog and it didn't install

    Hi, upgraded to Mavericks and Epson scanner software was quarantined. Powered on the scanner, plugged in the USB, clicked Software Update, and an Epson Printer Software Update appeared in the App Store Updatees area.  Clicked Update for the Epson printer software.  During the download, I was presented with a dialog asking me if I wanted the software to be automatically installed. I chose the "not now" option and as far as the App Store in concerned the software was installed, but it has not been.  Where did this go to and how can I force it to install?  Or is there some way to force the App Store to go through the download process again.  Many thanks!   Joseph

    Solution:https://discussions.apple.com/message/23504811#23504811
    Epson install: http://www.epson.com/cgi-bin/Store/support/SupportMavericksDetails.jsp?BV_UseBVC ookie=yes&oid=139863#stage1
    Epson Image Capture instructions: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 237343&foid=244523&infoType=FAQ

  • Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

    Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
    System: Windows 7
    Adobe CS5
    Printer: Epson Stylus Photo 1400
    Paper: Inkjet matte presentation paper with slight luster
    Installed latest patch for Adobe CS5
    Epson driver up to date
    After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
    The files I am printing are photographs of dogs with lots of detail  I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
    My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
    Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
    When I change to these settings in printer window: Color Handling:  Printer manages color.  Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
    Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
    Also I am confused as to what ICM color management system to use with this printer and CS5:
    What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
    Do I embed the ICM I choose into the new files I create? 
    Do I view all files in the CS5 workspace in this default ICM?
    Do I set my monitor setting to the same ICM?
    If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
    Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
    Is using the same ICM for all devices what is called a consistent workflow?
    I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

    It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
    I hope this may help...............

  • I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

    I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

    Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

  • Hi, i have just scanned some docs via my Ipad  and Epson printer. Saved them on a local folder! Where can i see and access this folder?

    Hi, i have just scanned some docs via my Ipad  and Epson printer. Saved them on a local folder! Where can i see and access this folder?

    Welcome

  • I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

    I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

    this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
    this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
    i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
    remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
    i have been to the local apple care store and they are clueless, too.
    should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
    at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
    thanks...sorry it was you who got this problem..

  • Problem with Lightroom and Epson Printer

    I'm suddenly having problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5, and have an Epson Photo Stylus R2400. I've been using this combination from the beginning with no problems. Now suddenly when I try to print I get an error message that says Media is out or not loaded correctly. Neither is the case. I have tried restarting my computer, the printer and everything else I can think of, but nothing works. I can print from any other application without problems, so I'm assuming it's an issue with Lightroom.
    Has anyone experienced anything similar? I was going to uninstall lightroom and do a reinstall but I can't find my installation disc. Now I'm at a loss to figure out what to do.
    Thanks,
    Craig

    Try deleting you prefs file and/or print templates.
    Lightroom is unique to many other programs in that it saves and restores printer settings. Some bad data may tried to be passes. A "fresh start" might help.

  • Photoshop CS3 and Epson printer

    I have PS CS3 with an Epson 4000 running on windows XP. I know Adobe is aware of a problem in which under some circumstances, (when you use roll paper) PS will print a smaller image off center and displaying in the interface the portrait mode despite me clicking landscape. I also know Adobe has a technote that offers solutions (I am already using version 10.0.1 with Bridge 2.1.1.9. Also solutions 2,3, and 4 on the tech notes have not worked. I tried different combinations and permutations of settings to no avail. Now I work on CS3 on the image, save it, and print it on CS2 which I kept on my computer, and has no problems printing. Can you please keep this as an on-going problem, since it has not been solved yet? Any feedback on this? There are a lot of Epson printer out there, and printing for a photographer is absolutely important. Thanks.
    Ed Kneler

    Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
    With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
    Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
    What is the solution for right now?

  • O.T. iMac and Epson Printer Issues

    I have just set up my new 20" iMac running OS 10.5.6 and have been testing my various peripherals.
    Printing old saved PSE3.0 images on my Epson 1290 (1280) they are coming out noticeably darker than when printed under OS 10.3.9. I deliberately did nothing with the saved files in PSE,just clicked print to avoid introducing any screen calibration issues,and the correct .icc profile had been added to Library/Color Sync/ Profiles for the paper I was using (and have always used).
    Is this a known problem with an iMac running Leopard ?

    Perhaps I should have done this before starting my thread,but who wants to reinvent the wheel !
    Having spent many hours this morning,and even more sheets of paper to resolve this problem,I have come to the following conclusions on printing an image from PSE3 in Leopard :
    USING THE EPSON PRINTER DRIVER -
    Leave the printer manage colour - color controls - photo realistic - gamma 1.8
    USING GUTENPRINT DRIVER (http://gimp-print.sourceforge.net/MacOSX.php)
    Make no changes to Color Sync use Automatic
    Do not change the .icc profile (although I did leave it set in PSE3).
    Adjust print quality to max possible.
    Both these options give acceptable prints, Epson perhaps a shade darker.
    I preferred the colour representation in Gutenprint,but that is obviously a personal thing. Whether they'd satisfy someone making a living from photography is another matter.
    In the future I will probably tweak the lightness in PSE to compensate for the slight darkening in the print process,but probably leave the colours alone.
    Two other points -
    The Gutenprint driver seems to print more quickly.
    Adobe and Apple don't seem to care.

  • Using and Epson printer

    I have an Epson R200 which is great - does anyone know how I can select an option (on iMac or the Epson) to print in `black` only. If not, can anyone recomend a printer that only uses `black` - I print more docs thans pics and I can`t afford to keep renewing the colour ink cartridges especially when the docs are just `text` and thus B&W.
    I`ve searched absolutley everywhere for an answer to my problem.
    PS: I don`t have the original Epson `printer` paperwork anymore.
    Russell (Uk)

    just filled all the cartridge spaces with all black ones and that way they`d never run out - possible, yes?
    I don't think so, nozzles are not smart. When a color is called for it will go to the designated nozzle. If no color is called for, it will never go to that nozzle. Hence the expression, "nozzlehead". Also, the black catridge is usually larger?
    I suspect the overiding factor will be that if one (or more) cartridges is `ink out` then I`ll not be able to print even if only `black` is selected as the print optionI'm not sure, but you can use the printer utility to check how low your ink level in each catridge is so you don't let them run out.
    -mj
    [email protected]
    iMac G4 17 FP 800 MHz 768MB   Mac OS X (10.4.5)   2 X LaCie d2's APC-UPS / iMac 333MHz 256MB 10.3.9

  • Scripting Print Dialog and Epson Print Dialog - Consultant Required

    I have a project I would like to pay a Scripting  Consultant to develop.
    The script should run on Photoshop CS 3 , Mac OS Leopard 10.5.6,
    I would like the script to be preferrably in Applescript to link with the Mac OS, but it can be Javascript
    Functionality
    1. The script should  script the settings within the Photoshop print dialog box such as the colour profile
    and colour management options
    2. I would also like the script to control the Epson Print Settings in the Epson print dialog
    boxes such as the Page Size/Set Up and Printer settings such as paper type=  Epson Premium Glossy.
    3. Finally I would like  the script to be triggered via a button/palette which floats in Photoshop, so immediately we want to print
    a design to a particular Epson printer (we have 4 different Epson printers ) we can click that button and it will
    send the print to that printer with the correct profile, media settings, page set up etc
    Notes
    I have been told that "Configurator" made be the best application to create these printer buttons.
    I have also been told that it may be possible to script the Epson Dialog using information from the Script Listener
    As you can tell I am not a scripter but have a clear idea of what is required and am happy to pay for the experitise required here.
    If you want to email directly please do so -
    [email protected]
    Thanks very much
    Josh

    I have been told that "Configurator" made be the best application to create these printer buttons.
    But Configurator is for CS4.
    I’m not sure the print-dialog can be Scripted the way You want it; at the company where I work we use a Server-Hotfolder-setup which makes such things easier, as one can simply save separated copies into the respective Folders.
    You could also post on http://www.ps-scripts.com/
    Many of the most knowledgeable contributors to this Forum are involved in that Forum.

  • Maverick and Epson Perfection V759 Pro

    Just installed maverick and my scanner doesnt work any more. Epson says you should make an update from apple, but there is no update and epson hasn't any new software. What a great performance!
    Does anyone know how to make the scanner work?

    So...i got my scanner to function by way of someones advice on this thread to go to the system preferences and choose scanner....clicked on scanner in the side panel...clicked on open scanner and it ran the scanner.  I would hope the software update will be ready soon. I did not have to add my scanner as it was turned on during this process and showed up automatically.  I did not delete my epson software...It didn't seem to make a difference.

  • AEBS and Epson Printer Utility

    I wonder if anyone knows of any work-arounds for being able to use the Epson printer utility while using Airport Extreme Base Station? Printer does not show up in window when it searches, since it's connected to AEBS, thus cannot use utility that shows ink levels, or cleans out heads,etc! I have to connect it back to desktop (or laptop)to be able to use.

    That is expected. See KB 107430, AirPort Extreme, AirPort Express: Can't use USB printer utilities while printer sharing.

  • I upgraded to Mac OS X 10.6.8 and Epson Printer Software update 2.7 on the 29th of June and now I cannot print anything.  I have contacted Epson and Apple and both have tried to fix the problem without success. I am using a MacBook

    Does anybody else have this problem?  Epson and Apple don't have any solution.  The message I get from the printer is as follows:
    Error/library/printers/EPSON/Inkjet Printer2/Filter/rasteroescpII.app/Conents/MacOS/rasteroescpIIfailed

    Thanks for the replies guys.  Epson put me through a complex set of instructions to install an earlier driver.  The problem was not solved.  Apple also tried to solve the provlem by getting rid of the printer, unplugging it etc and then re starting and checking computer/printer communication by printing a test page from the system preferences/Pring & Fax options.  This worked proving the the computer and printer are talking to each other. 
    The printer works properly as a stand alone unit.  That is, I can copy and print and scan and print with no problems.
    The Apple support guy didn't suggest any Apple alternative drivers so I assume there aren't any.
    Neither the Epson nor Apple assistants seemed interested in the printer generated error message.  I would have thought it would at least provide a clue to the problem to someone with technical expertise.
    It seems that there are a lot of problems with the 10.6.8 update so maybe Apple will get to work and bring it up to scratch.  I hope it gets things right soon.

Maybe you are looking for