Mavericks and FCP 5.1

Anyone using Final Cut Pro 5.1 upgrade to Mavericks (10.9) and have things work/not work? Thanks for any anecdotes.
(Please, no snark about running such an "old version" as 5.1 - heard it all before.)

You have posted this in the FCPX forum. Here is where it should be posted in order to have your question seen by more FCP5 users.
Russ

Similar Messages

  • I have upgraded to Mavericks and I now cannot import DV into FCP through the capture presets.

    Since upgrading to Mavericks, I cannot import DV vision through my Sony FX-1E. I have tried various connections - DV to Firewire 400 + 800 with no success. I now have to get the vision ingested at another facility and exported to a hard drive in order to edit.
    Is there a way I can get vision into FCP?

    FCP (not FCPX) is legacy software, now EOL and not designed or guaranteed to work with Mavericks, some people report no problems others do, it depends on your setup. I'd suggest using iMovie to capture your footage then transfer to FCP to save using (or paying) another facility. An alternative (and my own solution) is a second boot drive with 10.8.5 and FCP 7 which still works OK.  

  • HT203477 My FCP 10.1 is freezing at  "Restore window layout" I am running on mavericks and the layout folder in not in applications support... What do I do ???

    My FCP 10.1 is freezing at  "Restore window layout" I am running on mavericks and the layout folder in not in library/applications support/ final cut pro... What do I do ???

    Had the same issues. For me, I found unmounting any external drives and relaunching FCPX worked.
    Mavericks seems to have some issues with launching Final Cut, so its best to launch and then plug in any external drives - hope that helps.
    Source - http://support-partners.com/troubleshooting-tips-for-fcpx-on-mavericks/
    M

  • Need to install FCS3 in Maverick and using USB 3.0

    I will be getting two machines - a new MBP with Retina and an iMac. Both are coming in any day, July 2014. This means OS Maverick OS. I opted to have FCX pre-installed (momentary lapse of judgement) on both, but I also hold licenses for FCStudio3. Can FCS3 be installed on both new machines with out much hassle? I'll adapt, but I need my back up editing platform as I am a non-stop editor. Or, do I suffer my fate, leave the old software on my old machines, which I get to keep, and press on.
    My only downside is the re-purchase of some peripheral software and plugins, but i'll suck that up, (its not my money, ha).
    ALSO, is USB 3.0 a good pipeline for editing? I've got to have new drives for these machines, and I really need to have a small daisy chain if possible. I need a good pipeline for full HD and my machines have Tbolt and USB 3 ports.
    Your suggestions will help, tremendously.

    As FCP X and FCP 7 both have the same name (Final Cut Pro) they cannot exist simultaneously in the Applications Folder but fear not, the cure is simple.
    Change the FCP X name to something like FCP X or whatever you fancy and then you should have no problem installing FCS3.
    Dyed-in-the-wool pros would probably never touch USB 3.0 but for normal mortals they are perfectly fine  .  .  .  as indeed are USB 2.0
    Addendum: I can't remember for sure, but if you try to instal FCS3 without changing the name of FCP X,  I have the feeling that it will go ahead and install FCS3 in a folder called Final Cut Studio  inside the Applications folder.
    Also, if FCP X does not have the name Final Cut Pro  Software Update will not recognise it.

  • I just got Mavericks and Final cut wont export!

    I've just got Mavericks and I recored a review of it. Wen I went to edit and export it, I found that non of the share options worked. Some of them said "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)" and some just dont do anything. Ive tried reintalling FCP but that didnt do anything. Please help!!!

    Try going through- http://support.apple.com/kb/TS3893 It usually takes care of these sorts of issues.

  • Hi i have just downloaded maverick and cannot find a search icon that'l stay on my toolbar

    just up graded to mavericks and i cannot find a search icon that'll stay on my tool bar..? i can find the one in edit/find but it closes after use.  also safari help does now not work... would much appreciate some help
    thanks
    nicola6

    In Snow Leopard the Spotlight access is exactly the same. The only search field is in the Safari toolbar, and this has been amalgamated with the address field - as I said above, just type the search terms in the address field:

  • Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

    Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games. 

    Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.   

  • Can't open Pages '09 Document (Upgraded to Mavericks and Pages 5.0))

    There is one Pages '09 file that I can not open now that I have upgraded to Mavericks and the new Pages.  Of course it is an assignment that my son needs for school!  When I double-click on it I get the message that the document could not be read, that it does not have a valid format.  I tried opening it with the 4.3 version of Pages, but get the same result.  I also tried to pull the document from the time machine, and same problem.
    Any suggestions/work-arounds?  I tried simply renaming the file format--no luck.  Do I need to repair permissions? 
    I am on a 3-week old iMac 2.7 GHz Intel Core i5 with 8GB 1600 MHz DDr3, 1GB old school drive.
    Jim

    Maybe try what was suggested here:
    https://discussions.apple.com/thread/5466954?tstart=0
    "I had this problem with both pages and numbers so I closed all the background apps did a reset by holding down the home and power buttons and now they both work."

  • I updated the maverick and now mail won't open at all

    i updated the maverick and now mail won't open at all

    Have you tired opening it from the Applications folder?
    What happens when you try to open Mail?

  • Recently upgraded to Mavericks and iMovie '13, and suddenly I'm beach balling like mad?

    I upgraded to Mavericks and iMovie '13 recently, and have been working on a video project in iMovie for the last few days. I hadn't been having any issues, but now I'm 'beach-balling' almost constantly, not just in iMovie, but everywhere. Opening a new app (iMovie/Chrome/Safari) will cause beachballs, and sometimes iMovie will fail to launch entirely, appearing as 'Not Responding' in Force Quit. Even using the Finder bar has caused beachballs. I've removed extraneous apps, cleared hard drive space, performed Disk Repair, and am not seeing much improvement. My EtreCheck output is as follows:
    EtreCheck version: 1.9.11 (43) - report generated June 12, 2014 at 2:37:47 PM EDT
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.9 GHz Intel Core i7 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: (null)
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 0:48:8
    Disk Information:
              TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 749.3 GB (389.64 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [kext loaded] com.logmein.hamachi (1.0) Support
              [not loaded] com.tascam.usb2audio.driver (2.0.4) Support
              [not loaded] com.tascam.usb2audio.driver_TIGER (2.0.4) Support
    Launch Daemons:
              [running] com.adobe.ARM.[...].plist Support
              [loaded] com.adobe.fpsaud.plist Support
              [invalid] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [failed] com.logmein.hamachimb.plist Support
              [invalid] com.oracle.java.Java-Updater.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist Support
              [loaded] com.facebook.videochat.[redacted].plist Support
              [loaded] com.google.keystone.agent.plist Support
    User Login Items:
              iTunesHelper
              Dropbox
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
              Default Browser: Version: 537 - SDK 10.9
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  11%          iMovie
                   6%          Safari
                   1%          fontd
                   1%          WindowServer
                   0%          hidd
    Top Processes by Memory:
              408 MB          iMovie
              179 MB          com.apple.WebKit.WebContent
              147 MB          com.apple.IconServicesAgent
              131 MB          Safari
              82 MB          Finder
    Virtual Memory Information:
              3.86 GB          Free RAM
              2.44 GB          Active RAM
              889 MB          Inactive RAM
              846 MB          Wired RAM
              800 MB          Page-ins
              0 B          Page-outs
    I have had no software issues with my MacBook prior to this (although I did have water damage that was repaired by Apple). If the problem is an issue with Mavericks/iMovie, I wouldn't be opposed to downgrading back to iMovie '11 or Mountain Lion if that's possible, as long as I can maintain my work on this project. I'm really looking for a 'quick and dirty' fix, as I'm already behind on this video project and need to finish as soon as possible. Thanks!

    You may find these articles useful:
    http://support.apple.com/kb/PH14176
    https://discussions.apple.com/docs/DOC-6162
    Ciao.

  • Upgraded to Mavericks - and iCloud.   Calendar will not stop 'updating' - and has not synced all entries across all devices/calendars.

    Hello Apple Support Community;
    I am looking for some help on several matters related to my upgrade to OS X Mavericks this week.   THIS issue is one related to CALENDAR.
    I believe that I have done everything (as instructed) to install, activate, and sync contacts and calendars via iCloud - immediately following my upgrade to Mavericks earlier this week.   When I opened CALENDAR for the first time - from the Dock on my computer (not the iCloud calendar) - after upgrading to Mavericks and setting up iCloud - CALENDAR provided a pop-up notification stating "Moving calendars to server account..." with a moving "candy cane" progress bar.  
    This has been "updating" for about 12 hours, now.   And while open and "updating" - it will not allow ANY other commands, scrolling, or menu options.   Additionally, I am unable to close this calendar of the Mac, unless I 'Force Quit'.   I have, in fact, executed Force Quit, and restarted the Mac.   No change... it still "updates".  
    When I open the iCloud calendar - it opens and works (mostly).   There are events on my iPhone 5 that are not on the iCloud calendar.   And there are events on the iCloud calendar that are not on my iPhone.   I have created new calendar events on each calendar account (iCloud on my Mac and iPhone 5) - and they seem to automatically update each device.   There does not seem to be any obviously rationale for the inconsistency of the calendar (iCloud and iPhone).
    Can you offer ideas for possible solutions to:
    1)  the "permanently updating" calendar from the Dock on my Mac?
    2)  ensure that all events are properly synced across all calendar accounts (and devices)?
    THANK YOU!!

    Hello Phil... I got nothing from the Apple Communities.   May have been very hard to diagnose via my description - or hard to resolve given many possible solutions.  
    The perpetually updating scroll-bar-of-death continued for about a week.
    I DID (finally) get resolution from the Genius Bar in my local Apple Store.   They deleted all prior "local" calendar back-ups and content - as I had my Calendar up on iCloud - which essentially "reset" the calendar function... and then reloaded the calendar, and then pulled in my calendar data from iCloud.  
    They twisted and tweaked a few more things that I was not able to follow (sorry I cannot offer more assistance on these other things).
    They also reloaded Mavericks.  
    Everything seems to be working well now.
    Apple Community... any more guidance for Phil - and others???
    Good luck, Phil.

  • Slow MacMini after upgrading to Maverick and later Yosemite.

    Gents,
    I have had nothing than trouble with my MacMini (late 2009) since i installed Maverick and I hoped some things would improve with Yosemite. That did not happen. I have been through all possible "solutions" but no luck. I hope someone can help me. My MacMini was working like a charm until I installed Maverick.
    (PS: My back-up drive is not connected as shown below)
    This is my Etrecheck:
    Problem description:
    MacMini (late 2009) Sluggish after installation Maverick and later Yosemite
    EtreCheck version: 2.1.2 (105)
    Report generated December 15, 2014 at 7:17:37 PM GMT-2
    Hardware Information: ℹ️
      Mac mini (Late 2009) (Verified)
      Mac mini - model: Macmini3,1
      1 2.53 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      SyncMaster 1920 x 1080 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:5:40
    Disk Information: ℹ️
      Hitachi HTS543232L9SA02 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 319.21 GB (67.50 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5670S
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Elgato Video Capture.app
      [not loaded] com.elgato.driver.Pluto2 (1.1) [Support]
      /Applications/Toast 10 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      /System/Library/Extensions
      [not loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) [Support]
      [not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Support]
      [not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Support]
      [not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.2 - SDK 10.5) [Support]
      [not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) [Support]
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) [Support]
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.divx.dms.agent.plist [Support]
      [loaded] com.divx.update.agent.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
      [invalid?] com.macupdate.desktop5.scanner.plist [Support]
      [invalid?] com.yahoo.YahooContactSyncAgent.plist [Support]
    User Login Items: ℹ️
      Caffeine ApplicationHidden (/Applications/Caffeine.app)
      AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
      G-Technology Assistant ApplicationHidden (/Applications/G-Technology Assistant.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Google Earth Web Plug-in: Version: 6.1 [Support]
      Default Browser: Version: 600 - SDK 10.10
      OVSHelper: Version: 1.1 [Support]
      AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 8.0.0 [Support]
      GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
      Silverlight: Version: 4.0.51204.0 [Support]
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    User internet Plug-ins: ℹ️
      BrowserPlus_2.9.8: Version: 2.9.8 [Support]
      Google Earth Web Plug-in: Version: 7.0 [Support]
    Safari Extensions: ℹ️
      ASCPowerTools
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.2
    3rd Party Preference Panes: ℹ️
      BrowserPlus  [Support]
      Flash Player  [Support]
      Perian  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 319.21 GB Disk used: 251.71 GB
      Destinations:
      MacMini Backup [Local]
      Total size: 402.92 GB
      Total number of backups: 15
      Oldest backup: 2014-10-12 15:52:07 +0000
      Last backup: 2014-12-09 00:11:21 +0000
      Size of backup disk: Too small
      Backup size 402.92 GB < (Disk used 251.71 GB X 3)
    Top Processes by CPU: ℹ️
          6% WindowServer
          3% JustCloud
          0% launchd
          0% AppleSpell
          0% SystemUIServer
    Top Processes by Memory: ℹ️
      137 MB Dock
      82 MB CalendarAgent
      77 MB Spotlight
      73 MB com.apple.internetaccounts
      73 MB NotificationCenter
    Virtual Memory Information: ℹ️
      62 MB Free RAM
      1.71 GB Active RAM
      1.70 GB Inactive RAM
      554 MB Wired RAM
      1.16 GB Page-ins
      471 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 07:12:36 PM Self test - passed
      Dec 15, 2014, 10:34:27 AM com.apple.AmbientDisplayAgent_2014-12-15...crash

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I downloaded mavericks and now I can't update iphoto, help!

    Please help! can't open and download iphoto!
    Don't want to lose all my pictures

    What version of iPhoto do you currenly have?  This screenshot describes which of the previous versions of iPhoto are compatible with Mavericka and which qualify for a free upgrade to iPhoto 9.5 and which require a paid upgrade:
    OT

  • After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • Can't find a folder after upgrading to maverick and still have the previous OS

    Hi,
    Last night I upgraded my mac to maverick...my previous OS was in Disk C and since it was showing that disk is full i had to put maverick in disk D..so i have two disks with OS that means less space for my personal use....also while putting maverick in D I already had a folder containing movies in it...When i am searching in spotlight i can get the movie but am not able to find it without it....Also how do i get rid of the previous OS and should i do that??

    ishica ghosh,
    it sounds like what you’re calling your Mac’s internal space is what I’d call your Mac’s internal hard drive, and what you’re calling your three separate disks are what I’d call three partitions of your internal hard drive.
    Let’s begin by approaching these aspects one at a time. On my Mac’s internal drive, only 22 GB of space is being used in total, including Mavericks and perhaps a dozen apps. If your Disk C has been sized to be 119 GB but it is mostly filled up, then it seems as though you must have significantly more apps or data installed there than just your old OS. Do you have more than one administrative user and one standard user under your old OS?
    Here’s something that you can try to find out the amount of space that is being used by the user accounts on Disk C: boot into the old OS by holding down an Option key as you power up, use your cursor keys to select the OS on Disk C, and press the Return key. Log in as its administrative user, and from the Finder press Command-Shift-U to open the Utilities folder. Run Terminal.app in that folder. Within the Terminal window, give it the following command:
    sudo du -sm /Users/*
    This command will ask you for a password; give it the administrative user’s password. The password will not be displayed as you type it. Please copy the output from this command into your reply.

Maybe you are looking for