Mavericks and photoshop problem

Using photoshop CS3 in Mavericks and I get a ‘can't save file because it is already in use or was left open’ message when I try and save a photoshop file.
Found a fix online which is to turn off ‘Show preview column’ in show view options, but this is a pain because I like to have the preview with image and file info.
Is there a way around this, seems a strange way to get around this problem.

Resetting Photoshop Preferences has been known to solve Photoshop printing problems, especially when you have no problems printing from other Mac apps.
Hold down cmd-opt-shift while starting Photoshop and click Yes when the reset dialog comes up.

Similar Messages

  • Upgrade CS6 Illustrator and Photoshop Problem

    Hi hi,
    When I tried to upgrade my CS 6 Illustrator and Photoshop through my Adobe Updater, I kept getting the following errors:
    Adobe Illustrator CS6 Update (version 16.0.3)
    Installation failed.  Error Code: U44M1P7
    Adobe Photoshop 13.0.2
    Installation failed.  Error Code: U44M1P7
    Please advice on how to overcome the error.
    Thanks,
    just Q

    Hi hi,
    I've followed your manual downloading of patch installation, but error U44M2P7 occurs for both manually downloaded patch for Illustrator and Photoshop CS6 for Mac.
    Please advise.
    Thanks and Regards,just Q
    Date: Fri, 14 Dec 2012 21:28:21 -0700
    From: [email protected]
    To: [email protected]
    Subject: Upgrade CS6 Illustrator and Photoshop Problem
        Re: Upgrade CS6 Illustrator and Photoshop Problem
        created by Manish-Sharma in Downloading, Installing, Setting Up - View the full discussion
    Follow the steps in the below Kb :-  http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4922932#4922932
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4922932#4922932
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4922932#4922932. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Issues with Mavericks and Photoshop and Illustrator Cs6

    My illustrator cs6 and photoshop are unable to save documents, every time I try to save or save as the save window keeps disappearing. Occasionally I can save if I am really quick, but on average this is not an option,
    The same happens when I try and open something through either program, the open window disappears before I can click on anything.
    I can open psd or ai docs in finder but just not in the program.
    This has only happened since I installed Mavericks.
    any help?

    Same problem for me with CS5 so I downloaded the trial version of Photoshop CC--same problem again and Adobe does not know how to fix the issue.
    For a while holding down the shift key while opening Photoshop worked, then it failed yesterday. I'll try Alljeffedup's key combination solution.
    Current workaround is the Open With command in the finder.

  • OS X Yosemite - Ilustrator and Photoshop problems.

    I have a MacBook Pro, just over a year old. Updated to OS X Yosemite last week.
    Since updating Illustrator and Photoshop run much slower.
    Fonts don't show up in Illustrator, photoshop cursor flickers whenever I try do anything like there isn't enough power to run the program.
    I have 408GB of 498GB of memory free so that isn't the issue.
    This is really frustrating as I use them everyday as a designer and now wish I hadn't upgraded.
    I have uninstalled both programs and re installed but this has made no difference..
    Has anyone else had these problems / anyone help?
    Any info is much appreciated,
    P

    I've tried restarting a few times, and I still have the same problems. Any other suggestions?

  • Mavericks and Photoshop CC - blank white dialog boxes.

    On Mavericks.  I'm getting white blank dialog boxes in Photoshop CC. Doesn't happen right away. It lets me work for a limited time then I get the blank boxes and can only Force Quit.  I don't use Suitcase but I do have a Wacom. iMac.

    this is what WACOM responded to me:
    Dear Felix,
    We are sorry for the problem, but we cannot see such a problem in our tests. The PS menus are displayed
    by Photohop and the graphics driver. The tablet is technically not in any way involved in showing any menus.
    Nevertheless we have tested it here and unfortunately we cannot reproduce such a problem, neither in
    Photoshop Elements nor in Photoshop CC. We have customers complaining about lags in Photoshop under
    Maverick, but those customers do not have seen any problem with the display of menus. So not evryone has
    problems with displaying the menus, but might depend on graphics cards or other system parameters.
    As it is a wrong behaviour of Photoshop and not the tablet, the problem needs to be reported and
    reproduced by Adobe. Adobe developers have Wacom tablets and are in close contact with Wacom.
    If they can see a problem related to the Wacom driver, they can get direct assistance from us.
    So far we can only recommend to update the graphics driver and update Photoshop. Perhaps you need
    to uninstall and re-install Photoshop. We also recommend to set Photoshop preferences for the pointer
    to ‘standard cursor’ and not to ‘precise cursor’. If it is on a multi-monitor configuration we suggest to disable
    the option in Mission Control for ‘displays use separate spaces’. This is known to have problems with some
    graphics cards.
    Kind regards
    Andy
    WACOM technical Support

  • Slow imac with osx mavericks and other problems

    I have a late 2012 imac, after uprgrading to mavericks it is jerky, laggy, not very smooth, my internet is up and down, and many things in system preferences are not working even tough im an administrator. For example i want to reeboot from macintosh start disk and it after i click it nothing happens, or I attempted to run a command and it says i need to be root, but I am? i went to login option in my user, but same thing, when i click it nothing happens.
    How can i fix this?
    also is there an app to see if any apps of mine are incompatible now?
    ANy way to optimize my mac for most speed? my doc is back to 3d and wont go 2d anymore also.

    Activity Monitor – Monitor Performance Problems   
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • New Os X Mavericks and trackpad problem

    Hi everybody, yesterday i have installed maverick in my macbook white 2010. Today, after didn't use my mac for 20 hours, the trackpad is going crazy. It moves and click alone without any human contact. Can maverik create this problem?
    Sorry for the bad english!

    yep, I installed Mavericks earlier today, 27" 2011 imac, trackpad has no double tap smart zoom now, freezes whenever i attempt to swipe back to previous pages, really annoying as this is all pretty much second nature to me now so it involves having to close and reopen safari. This after i spent an hour on the phone to Apple support this afternoon after installing Mavericks due to an infuriating keychain assistant glitch. Not impressed.

  • Mavericks and RAM problems

    Since upgrading to Mavericks I have been having a great deal of problems with RAM.  I have 16GB installed yet it is quickly being all used to the extent the system basically shuts down as Apps are being paused.
    Looking in Activity Monitor it appears the main culprit is Calendaragent which at times is taking up 10GB of RAM.
    I am regularly quitting Calendaragent through Activity Monitor but this only gives me a brief reprieve before Calendaragent is again becoming bloated.
    I have had this Macbook Pro for about 15 months with no problems until I upgradeed to Mavericks.
    I haven't been able to find a solution.  Any ideas?

    Same issue here :-(
    I deleted Calendars Cache as described here, and that seems to have fixed it: https://discussions.apple.com/message/22480543#22480543

  • CS4 Encore and Photoshop problem

    Hello.  I was using CS4 Encore and opening a pre-packaged menu (Lakeside) and used the right-click "edit in Photoshop" option.  I've used it before without trouble, but it's been a while.  I'm seeing several oddities now and don't know what's going on. 
    1) Right-clicking in Encore and choosing "edit in Photoshop" opens Photoshop but not the actual file.  It just goes to a blank screen in Photoshop.
    2) If I open the file manually and make changes, they don't save.  As in, literally, the file doesn't save.  I can choose save and it doesn't return an error, but every time I choose "close" or "exit" I get the prompt to save again, and after saving if I force quit or something then the file does not exist in my target drive or update in Encore.
    I tried re-associating .psd files with Photoshop but it didn't work (they also appeared to be already associated).  I haven't made any changes lately that I'm aware of. 
    Thanks.

    Well, I like "gremlins."
    Only thing that I can think of, would be if the Library Menu PSD was Read Only, but that should have yielded an error message to that effect.
    Also, the first thing that one normally sees is the warning about PAR (Pixel Aspect Ratio), as all Menus, not designed for BD (Blu-ray Disc) will have a PAR for non-square pixels. A full HD Menu will have a PAR = 1.0 (Square Pixels). That warning is just a reminder about the display, which will be Square Pixels, even though the PAR is not 1.0.
    One oddity, that I have encountered, but on a very limited and random basis, is where the Save from PS does not always update back through the link to Encore. Seems to happen about 1:10 +/- basis. Because I am often working on multiple Menus in a session, I just make sure that I do a Save at least 3x, during the editing process. Why 3x seems to be the magic number is unknown, but then, it always works for me (a few others have found similar issues with Save not updating, but not many). I just do my editing, hit Save (or Ctrl-S), then close up my Layer Sets, and hit Save, or Ctrl+S again, study my work, and do one last Save, or Ctrl+S. That has always worked perfectly, and the Menu does always update in Encore.
    Yeah, probably gremlins...
    Good luck,
    Hunt

  • I have just installed Mavericks and Photoshop won't launch-Program error.

    I just installed Mavericks to a new Macbook Pro, then installed a fresh copy of CS5.1. Everything works except Photoshop CS5.1, which fails with a "Program error". I've stripped out everything Adobe, Re-installed , re-entering serial number, tried Adobe Suite Cleaner Tool. Still the same. Any more thoughts?

    Try this...
    Open System Preferences > Flash Player
    Deselect:   Block all sites from storing information on this computer

  • Mavericks and Entourage problems!!

    Hello all.
    I have just updated my Snow Leopard to Mavericks via the free offer.
    My Entourage has decided to play up on two things:-
    • When I open Entourage it automatically opens up a new email to compose = Don't want it to.
    • Also, as it launches a warning window appears asking for permission to allow/deny accepting incoming network connections. I have changed the settings in the Firewall pane (as suggested in the window) but still it asks me everytime Entourage opens.
    Finally, why when writing questions in this window, does the flashing cursor move up to the last sentence therefore mixing up the words typed?
    Hopefully when I type this it will show you.
    I will type some words here. ll add these words. As you can see it's jumped up. This would also happen in 10.6.8.
    Then I wi

    Entourage is End of Life software. it will receive no further updates. Be glad it opens.
    See this link for workaround to opening new window.
    Office 2008 apps open with new window after upgrading to Mavericks
    The issues with incoming network connections and cursor jumping most likely is specific to issues on your machine. It's either a settting or a conflict with a login item.
    Log out under the Apple in the Menu bar
    Log into Guest User
    Do you see the same behavior.
    (Fair disclosure: OfficeforMacHelp is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)

  • Mavericks and Keynote problems

    Hey guys, I am trying to work with Keynote presentation on my computer and when I try to edit the presenter notes below the slides it stops functioning. I wouldn't say it crashes as it seems to work, no spinning wheel, and the menu bar works ok. Has anyone came across this weird thing before ?

    Hi everyone
    Konsta_ntionos I did not experience the problem you mentioned.  So ypu added one more.
    Amongst many issues twith regard to Keynote 6.0.1 I have difficulaties to import templates from Keynote 5.3 into Keynote 6.  This seems not to work at all.  Even templates from the App Store have to be imported one by one from the app in Launchpad. Does anyone has a solution for this? 
    I agree with TheMarkusAllen that this update of Kaynote (and Pages) is not the quality we expect from Apple.
    I hope they offer a solution to make us enthusiast again.

  • Mavericks and Dropbox problems

    We have recently installed a new mac pro running mavericks 10.9.2. I have since been having issues copying files to various dropbox folders. Our dropbox is set up with 10 folders, one for each customer service rep. These are all in a volume which i mount on the mac. I cannot seem to copy directly into these folders. I can copy to a subfolder within each csr's main folder but not directly into thier main folder. Then I can sometimes move the file from the subfolder to the main folder and sometimes not. Does anyone have any ideas of what is going on.

    Same issue here :-(
    I deleted Calendars Cache as described here, and that seems to have fixed it: https://discussions.apple.com/message/22480543#22480543

  • Updated to Mavericks and have problems in terminal with bash

    Hi,
    After a number of years of being really happy with my Macbook Pro, Snow Leopard, I updated to Maverics. Amongst other problems with numerous apps, I ve come across a problem with terminal environment. Specifically when I startup a terminal shell I get these errors:
    -bash: .bashrc: No such file or directory
    -bash: /usr/local/auto/07p/cmds/auto.env.sh: No such file or directory
    ': not a valid identifier
    -bash: /auto/07p/cmds/auto.env.sh: No such file or directory
    for some reason I cannot set .sh environments and I also have a problem running python commands on command line for an analysis software AUTO07p (http://indy.cs.concordia.ca/auto/) such as @pp or @R
    Can any one help?

    Hi,
    Thanks for the prompt response. I do have a bash_profile and it looks like that
    . .bashrc
    source /usr/local/auto/07p/cmds/auto.env.sh
    source /Users/myprofile/auto/07p/cmds/auto.env.sh
    source /auto/07p/cmds/auto.env.sh
    # Added by Canopy installer on 2014-04-24
    # VIRTUAL_ENV_DISABLE_PROMPT can be set to '' to make bashprompt show that Canopy is active, otherwise 1
    VIRTUAL_ENV_DISABLE_PROMPT=1 source /Users/myprofile/Library/Enthought/Canopy_64bit/User/bin/activate
    # Setting PATH for EPD_free-7.2-2
    # The orginal version is saved in .bash_profile.pysave
    PATH="/Library/Frameworks/Python.framework/Versions/Current/bin:${PATH}"
    export PATH
    I m not sure whether the Canopy additions are causing a problem.
    What do you mean creating a new account? Like a new profile for my mac?

  • Mavericks and Photoshop elements 11

    Is Mavericks compatible with Mac OSX 10?

    By Prefs Barbara meant Editor preferences. Please see if solution #1 mentioned on the blog is help or not.
    Please let me know if it doesn't resolve the issue.
    ~Surendra

Maybe you are looking for

  • Do not carry out new pricing when plant change in sales order

    Hi, I have one z field in additional data tab in sales order. This field store the original plant if anyone has changed plant in Sales order. My requirement is to trigger the pricing in sales order with this old plant. I am not getting any exit for t

  • How to display the Arabic language

    Hi all, I have been developed the driver and generated the driver for the multiple language. But I have a difficulty to work in the Arabic. I generated the RC file with the notepad application on the Arabic OS and build with that RC file in the Visua

  • Random songs are missing from iTunes folders from CD's I converted.

    The dreaded exclamation point has shown up on a number of random songs that were converted from my music CD's and are completely gone from my hard drive, including the iTunes folder. The titles and descriptions are there, just not the music. Even str

  • Calculating months instead of days

    Dammit!  My client wasn't happy with me calculating 90 days from a given date field. He wants 3 months. So I thought I'd solved my problem, but I haven't.  Can anyone help me to calculate 3 months instead of 90 days. eg. If the 'from' date is 23/05/1

  • Can any one prvide documentaion for BAPI Material, Sales order and Pricing?

    Hi,         Can any one provide documentaion for BAPI Material create and change, Sales order create and change and Pricing? thanks & Regards, Gop.