Mavericks audio not seeing M-Audio 2626 but Logic X works fine?

(Reposted because my first question title was confusing) 
10.9.2 doesn't recognise my M-Audio 2626 soundcard interface, even though Logic X does.  So this seems like a fault with with Mavericks?
I know there are issues with the 2626 and Mavericks but if Logic X sees it and works perfectly, but Mavericks doesn't, then what....?
Hope somebody can help.
Many thanks,
Hugo

Thank you, Christina. Turns out they are mostly focused on sound problems when the video is playing, but some of their ideas may be applicable.
Are you using audio from iTunes for your menu music, and have you tried other songs?
Is the music purchased through iTunes, or from a CD you own?
Does the Preview in iDVD have sound for that menu?
John

Similar Messages

  • DNS not resolving on one Mac but the other works fine in same local network

    Snow Leopard is doing something strange to the DNS or the permission to ping.
    I have 2 Macs on the same local network, connect through the same ISP (verizon FIOS). One has no problem resolving any domain, but the other is constantly not resolving some domains.
    The problem progresses like this:
    * All of a sudden, DNS is not resolving from Ethernet (when it did perfectly well a minute ago).
    * Then I switched to wireless (using the same LAN), and it resolved fine.
    * Then it failed completely a few minutes later.
    * Then I reboot my Mac, and it seemed to clear that, and worked for a day.
    * Then it failed again in both Ethernet and Wireless; rebooting does not fix it.
    * I cleared all the caches using Onyx, did "dscacheutil -flushcache", zapped the PRAM, reinstalled 10.6.2 combo update, repaired the permission, nothing works.
    * Since the unresolved domain is my own domain, I changed the nameserver, and waited for it to propagate to see if that may be the problem, since it appeared that it is not resolving the A Record, and I waited 72 hours, and it is not resolved or propagating to the local DNS, but it worked perfectly well on my other Mac within the same network.
    * Then I added other DNS, such as google DNS 8.8.8.8 or openDNS servers to it, but it didn't fix anything.
    * Then I "ping" either the unresolved domain or my own Mac .local, and it gave me the error "permission denied". (Whereas I have no problem pinging my own Mac or the unresolved domain in my other Mac that works!).
    * Then I "sudo ping" the unresolved domain or my own Mac, and it pinged perfectly well.
    * Then I tried "ping6" my own Mac or the unresolved domain on the broken Mac, and it worked fine!
    * Also, I used http://network-tools.com to ping it, and noticed that during the trace, somewhere along the route through te7-2.dsr02.dllstx3.theplanet.com and po2.car04.dllstx5.theplanet.com, it timed out along the route, so I don't know if the timeout could have been causing the reject, but I doubted, because "sudo ping" locally will get through but "ping" does not.
    So I think I traced the Snow Leopard DNS problem as follows:
    * Why does "ping6" works, but "ping" permission is denied unless the user is root?
    * I tried to "chmod 4755 ping" but it won't let me.
    * Is it because DNS is resolving using IPv6 but not IPv4?
    * Or is Snow Leopard somehow screwed up the permission to access ping or similar DNS service?
    * Why DNS has no problem in one Mac but caused problem on the other Mac, even though they are in the same local network?
    * The only difference between the Macs maybe because I have Parallels installed in the Mac that failed to resolve DNS (with the extra Parallels Shared Ethernet), which may be interfering with it, but I tried to turn Parallels Shared Ethernet off, and it did not fix the problem.
    Can anyone help or have any idea that I can fix this nagging bug with DNS? The DNS had worked before, but it simply quit working all of a sudden, and nothing can resurrect it.
    Thanks.

    Shut down Parallels and restart w/o letting any of Parallels TCP/IP stack resurrect itself. So many network issues with VM solutions. See if the problem persists. Create a new account and ping from there. Are your search domains manually entered on the 10.6 box?

  • FIREFOX 3.6 WILL NOT STAY ON TOP PROBLEM BUT 3.5 WORKS FINE

    WHEN I USE FIREFOX 3.6 OR ANY VERSION OF THE 3.6 AND I SELECT STAY ON TOP (I HAVE A THIRD PARTY PROGRAM THAT ALLOWS THIS) AFTER I MINIMIZE THE WINDOW THEN IT WILL LOOSE THE STAY ON TOP COMMAND. ALTHOUGH WITH FIREFOX 3.5 VERSIONS IT KEEPS IT'S STAY ON TOP EVEN AFTER BEING MINIMIZED. iN FACT ALL OTHER MICROSOFT PROGRAMS DO NOT HAVE THIS PROBLEM PLEASE EXPLAIN WHY THIS IS
    THANK YOU
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

    Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
    http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
    Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
    See:
    * http://kb.mozillazine.org/Installing_Firefox
    * http://kb.mozillazine.org/Unsupported_operating_systems
    Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
    Other browsers that you can look at:
    http://caminobrowser.org/download/releases/ (#os10.3.8)
    [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
    http://www.seamonkey-project.org/releases/seamonkey1.1.19

  • I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey.  Is there any way to convert them?

    I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey.  Is there any way to convert them or must I do it on another machine?
    Kaibil

    iPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
    Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them.

  • Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

    purpose: to create photo galleries to insert or not items:
    1) with phocagalery, it works
    2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
    Can you help me

    Mahsa21,
    We are glad that we were able to resolve the international calling plan issue for you.  If you need assistance,please  reach out to us.
    thanks,
    Tonya D.

  • ITunes does not see airport express speakers but airfoil does

    iTunes 6.0.2 and AE 6.3
    iTunes does not see the AE speakers but Airfoil does.
    Have restarted AE to no avail.

    Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

  • My laptop speakers are not working but my headphones work fine

    I have an HP Pavilion g6-1d73us laptop and although my headphones work properly the speakers do not. This is a recent problem.  I have tried troubleshooting with windows troubleshooter with no results. I have checked all the drivers for audio and they check out fine. I have tried driver software with no success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl
    This question was solved.
    View Solution.

    Hello @hifive11,
    I have read your post on how your notebook speakers are not working, but the headphones work fine, and I would be happy to assist you in this matter!
    The first step I recommend is to follow this document on No Sound from the Speakers (Windows 7). This should help to restore the sound to your speakers. 
    You can also enable the speakers on your computer as the default playback device. This can be done by following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's headset device). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Test your speakers
    If the issue continues, I recommend returning your notebook to a previous restore point before the speakers stopped working. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Why can't i update itunes on windows xp? It says update server could not be contacted but internet is working fine. I'm trying to go from itunes 10 to itunes version 11

    why can't i update itunes on windows xp? It says update server could not be contacted but internet is working fine. I'm trying to go from itunes 10 to itunes version 11

    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    See Here  >  http://support.apple.com/kb/TS3125
    From Here  >  http://www.apple.com/support/itunes/troubleshooting/

  • The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do n

    I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    Hello, give this a try...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

    I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

    Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
    If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
    EDIT: I assume you are saying that you just installed 10.8?

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • Iam not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

    am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

    i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
    i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud

  • Since I broght Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

    Since I broght (in Adobe Store) Ps6 for Mac, Bridge does not open and crashes. Mini Bridge, however works fine. What should I do?

    When I click gelsonhelmoldmacieira1 (me) in the Finder, I do not see the Library:
    The Library (Biblioteca) only appears when I click Macintosh HD:
    Following this path, I add gelsonhelmoldmacieira1 to the others in Photoshop, Bridge and Adobe:
    It seems that something is still wrong. The error message appears again.

Maybe you are looking for