Mavericks Caching Server very slow on gigabit Microsoft Network

Specs. OS X 10.9.5 / Mac mini / 8 GB Ram - Connected to Gigabit ethernet, 2 TB Hard Drives, 2.3 Ghz i7
Only a few days old. I have done all available updates that Apple released.
I had some difficulty getting the Mavericks caching server to work in the first place on our Windows Server 2012 network. Caching would work for the Server itself but none of my iPads or other Windows machines would cache or pull from the cache.
My work around was to manually create a DNS Host Name and PTR on the Windows Server so that we could actually nslookup and ping the Mavericks Server by hostname.domain.local This immediately fixed the issue and all hosts can cache and pull from the cache.
Speed is an issue. I currently cannot get any transfer speeds over 2 MB/s
Using the caching server to deploy an app (I verified that the internet connection was not being used and that it was coming from the caching server)
Connecting to a file share on the Windows Server and manually Copy/Paste files.
I verified the slowness using Activity Monitor on the Mavericks Server.
I have researched and found many similar complaints for the SMB2 protocol. I did not find a good enough Terminal Command to paste that I felt comfortable doing and at a later date undoing when Apple fixes the slowness issue.
Any help is greatly appreciated.
Does anybody know the protocol that Mavericks uses by default to send out the cached updates etc (SMB)?
If you know the correct command to paste into Terminal to force Mavericks to use SMB1 and also the command to undo this change I am willing to try that as well.
Thank you in advance,
TechJeff

I tweaked the DNS a little bit more...Under DHCP IPv4 Properties --> DNS Tab. I selected "Dynamically update DNS A and PTR records for DHCP clients that do not request updates". This allowed our DNS to register the Macintosh server and ipads etc. My SMB2 speed is up to 300 mbps from 16 mbps.
My caching server transfers are still maxing out at 2.1 MBps. I have switched out my wireless unit to a 150 mbps unit that the iPad is connected to. My next troubleshooting step will be to download an app in iTunes on a computer that is plugged in to our gigabit ethernet on the same switch as the Mac Server to elliminate any potential bottlenecks or wireless issues.
Still looking for ideas if anybody has troubleshooting ideas.

Similar Messages

Mavericks Caching Server and PAT

Our network has a PAT configuration, with multiple public IPs. How effective will the Mavericks Caching Server (CS) be in our environment?
A PAT configuration would seem to be more likely in a medium to large sized network, which is where a CS would be most effective. Documents we've found so far indicate that the Apple update servers track the public IP of the CS and redirect clients using the same IP to the local CS. If that is correct, we'll probably see minimal benefit: with 32 public IPs in our PAT range, there is only about a 3% chance a given client has the same IP as the CS.
Although a firewall rule to route all Apple update-related traffic out via a single IP might work, that would require knowledge of all the addresses in use. A better solution might be to provide a way in the CS configuration to specify the pubic PAT range shared by the local private networks, with some mechanism for verifying that the CS can utilize all of those public IPs.

Apple have the entire 17.0.0.0 block of addresses so any Apple traffic will be in that block.
I also suggest you go to the following webpage on both your Caching Server and your clients several times over a period of time to see if they do all show the same single public IP address in which case you will not have a problem.
See http://www.whatsmyip.org

How to clear the cache clanup operations as the CE Server very slow?

Hi,
I am using SAP CE 7.1 on a Core2 Duo system(2.00Ghz with 2 GB of RAM), the server was working fine for the last 3 months but for the last 1 week or so it has turned very slow and its consuming a lot of my systems resources making my system dead slow though earlier my system was working fine.
Can some one please provide me the proces to clear the cache for the CE server as this might increase the performance, or any other process for improving the preformance of the CE srever?
Please reply ASAP.
Thanks in advance.
Regards,
Manish

Hi Manish,
Instead of guessing, the better option would be to run a profiler that would help you spotlight the issues which might be causing such a decrease in performance. There are plenty of tools available, also from SAP.
HTH!
\-- Vladimir
P.S. Please read the SDN Forums [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], especially about using words like "ASAP" and cross-posting in multiple forums.

After upgrading to Mavericks, macbook pro very slow

Hiya
I upgraded to Mavericks and ever since then my macbook pro is very slow.
When I try to open a new finder window, I get the rainbow ball. Chrome is extremely slow. Word is also slow to open, slow to wake, and slow to shut down. Pretty much everything is slow!
I did repair permissions using disk utility, but that didn't solve the problem.
I ran EtreCheck and here's what I got:
EtreCheck version: 1.9.11 (43) - report generated May 29, 2014 at 12:40:03 AM EDT
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:15:50
Disk Information:
          ST9500325ASG disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Ripley's Monster (disk0s2) / [Startup]: 499.25 GB (73.12 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Anywhere
Kernel Extensions:
          [not loaded] com.novationmusic.driver.usb.audio (2.3) Support
          [not loaded] com.numark.V7.usb_TIGER (2.0.3) Support
          [not loaded] com.numark.ns6.usb (2.1.0) Support
          [not loaded] com.numark.ns6.usb_TIGER (2.1.0) Support
          [not loaded] com.numark.ns7.usb (2.0.2) Support
          [not loaded] com.numark.ns7.usb_TIGER (2.0.2) Support
          [not loaded] com.numark.v7.usb (2.0.3) Support
          [not loaded] com.ploytec.xonedx.usb (2.0.2) Support
          [not loaded] com.ploytec.xonedx.usb_TIGER (2.0.2) Support
          [not loaded] com.rane.driver.sixtyeight.10.6 (1.1.2f4) Support
          [not loaded] com.rane.driver.sixtyone.10.6 (1.0.0f1 - SDK 10.6) Support
          [not loaded] com.rane.driver.sixtytwo.10.6 (1.0.0f1 - SDK 10.6) Support
          [not loaded] com.rane.driver.sl2.10.6 (1.0.1f3) Support
          [not loaded] com.rane.driver.sl3.10.6 (1.3.2f6) Support
          [not loaded] com.rane.driver.sl4.10.6 (1.0.1f2) Support
          [kext loaded] com.serato.usb.kext (2.3.0) Support
Startup Items:
          HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.rane.sixtyeight.daemon.plist Support
          [running] com.rane.sixtyone.daemon.plist Support
          [running] com.rane.sixtytwo.daemon.plist Support
          [running] com.rane.sl2.daemon.plist Support
          [running] com.rane.sl3.daemon.plist Support
          [running] com.rane.sl4.daemon.plist Support
Launch Agents:
          [running] com.amazon.sendtokindle.launcher.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [loaded] com.lexmark.bmspecificlaunchd.plist Support
          [loaded] com.lexmark.lxknetlaunchd.plist Support
          [running] com.pharos.notify.plist Support
          [running] com.pharos.popup.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
User Login Items:
          iTunesHelper
          GrowlHelperApp
          Stickies
          BlueHarvest
          EvernoteHelper
          Flux
          Flux
          Dropbox
          SpeechSynthesisServer
          EvernoteHelper
          Rowmote Helper
          6500 Series Button Monitor
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.4.1.18709 Support
          nplastpass: Version: 2.0.7 Support
          Unity Web Player: Version: UnityPlayer version 4.2.2f1 - SDK 10.6 Support
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
          OfficeLiveBrowserPlugin: Version: 12.2.0 Support
          ebrary Reader: Version: 2.22 - 1/26/10 Support
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.4.1.18709 Support
          iPhotoPhotocast: Version: 7.0 - SDK 10.7
          AdobePDFViewer: Version: 9.5.5 Support
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          AudioScrobbler: Version: 3.0.4 Support
User Internet Plug-ins:
          RealPlayer Plugin: Version: (null) Support
3rd Party Preference Panes:
          BlueHarvest Support
          Flash Player Support
          Flip4Mac WMV Support
          Growl Support
          SIXTY-EIGHT Audio Control Panel Support
          Sixty-One Audio Control Panel Support
          Sixty-Two Audio Control Panel Support
          SL 2 Audio Control Panel Support
          SL 3 Audio Control Panel Support
          SL 4 Audio Control Panel Support
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Ripley's Monster: Disk size: 464.96 GB Disk used: 396.86 GB
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 931.19 GB
                    Total number of backups: 10
                    Oldest backup: 2013-03-01 09:16:00 +0000
                    Last backup: 2014-05-29 03:59:43 +0000
                    Size of backup disk: Too small
                              Backup size 931.19 GB < (Disk used 396.86 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          WindowServer
               6%          Google Chrome
               3%          hidd
               1%          System Information
               1%          Dock
Top Processes by Memory:
          160 MB          Finder
          139 MB          mds_stores
          127 MB          com.apple.IconServicesAgent
          119 MB          Google Chrome
          82 MB          Dropbox
Virtual Memory Information:
          538 MB          Free RAM
          1.50 GB          Active RAM
          1000 MB          Inactive RAM
          1016 MB          Wired RAM
          483 MB          Page-ins
          0 B          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Remote Desktop To Windows Server Very Slow

I have OS X 10.6 running on a MBP and a problem that seems to be growing worse over time. I am using Remote Desktop (both CoRD and Microsoft Remote Desktop) to gain access to remote servers. One is a Windows Server 2008, the others are Windows Server 2003. Initially all was fine, but over the last 2 months access to the W2K server has crawled to a halt. Now, when accessing the other servers I'm having the same issue. I have tried different clients for remote access, used different high speed Internet connections (FIOS, a private network) and the result is the same. Very, very slow connections.
I have also tried using a different login on the laptop to no avail.
I booted Windows on my MBP using Parralels Desktop and tried using Windows RDC to the same servers; that works fine. In fact, I can access the servers very quickly using my iPhone's Remote Access software using the same Internet connection (home WiFi) as my MacBook Pro.
So I can only assume it's an issue with OS X 10.6, since different devices using the same Internet connection can make a much faster connection. But I can't find any similar posts on the issue.
Any ideas are appreciated!

Hi Jason,
From the error message, it seems that take time to load the user configuration properly from the server and then the network connection was slow. Please refer to following article
and check if help you to troubleshoot slow logon.
Troubleshooting
Slow Logons
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, please refer to following thread and check if can help you.
Remote
Desktop Services has taken too long to load the user configuration from server Event ID 20499
Hope this helps.
Best regards,
Justin Gu

Mavericks install incomplete. No Apple installers on HD. Will I be able to upgrade to Yosemite and will it fix all that didn't install with Mavericks upgrade? Very slow connection speeds 30 hrs to download Mavericks. Tried re-install; no help/

Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory 4 GB 1600 MHz DDR3; Graphics Intel HD Graphics 4000 1024 MB.
Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
Thanks,
JJ

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Re: BI Server very slow

Hi All,
Currently the BI server is very slow. Accessing the tcodes itself takes long time. Can anybody tell me the tcodes to monitor the server utilisation. How to improve the performance of BI system.
Regards,
Anand

Poor performance could be caused by many things.
Os level, check cpu utilization and memory usage with st06. If you are cpu bound or paging excessively it will cause very poor response time.
Look at sm51/sm50 to check for free dialogs. Are you running several data loads with parallel processing that could be tying up all your dialogs.
DB
st04, db02, Check that you are running runstats, that you have good buffer hit ratiios. Backups are at off-peak times
db01 to check for lock waits/deadlocks

Portal Server very slow!!

Hi
What's the best java compiler to use? javac is very slow!
thanks
willie

You can also precompile your JSPs, dig into the WLS docs to find out how.
Yahoo!
Brad
"Cameron Purdy" <[email protected]> wrote:
Try jikes. Search the EJB, Servlet and JSP newsgroups for "jikes" for
more
info.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"leslie.mampe" <[email protected]> wrote in message
news:[email protected]..
Hi
What's the best java compiler to use? javac is very slow!
thanks
willie

DI SERVER very slow

I have an application WEB that uses DI SERVER, with 150 users, and when data enter the site is put very slow, or collapse, the version that I have of SBO is 200Ä (6.80.318) SP:01 PL:14, somebody can help me

ok

Mavericks Caching server 2 for all Apple IDs?

Good evening,
At Mavericks server 10.9.1, does caching server 2 on Mavericks server caches for any Apple ID that is ont the local network?
Francois.

The application and the authorization are independent. The app/book are just data. When the first system requests it, the file is transferred to the caching server and held there as it is passed to the client that requested it. iTunes, Appstore, or the iOS device will then talk to the authorization server and assign the asset to the users account. When the next user requests the same file, it can now be vended from the caching server but authorization is handled by Apple's servers. So there is still an outbound request but this is trivial compared to the size of the payload.
One to of the best ways to see this in action is with a large OS update. Update one device. Then when complete, review your caching server to see that the data is there. Then update another system. It downloads in a blink of the eye.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

Airport Express as very slow in "extend wireless network" mode

Hi!
I am using a Airport Extreme (fourth generation) as a wireless router and a Airport Express 802.11n in "extend wireless network" mode.
I've set the Airport Extreme mode to 802.11n only - and all devices connect to the Airport Extreme as 802.11n Clients properly.
But as soon as they connect to the Airport Express, they only work in 802.11b/g mode (although they are capable of n)
and the connection is very slow - around 1Mb/s:
http://imageshack.us/photo/my-images/804/bildschirmfoto20111211u.png/
Can i force the Airport Express station to accept only "n" connections to speed up my file tranfers?
Thanks for any help!
matt

Where is the AirPort Express located in relation to the area that needs more wireless coverage?
Ideally, it would be at a point that is about half the distance between the AirPort Extreme and the area that needs more wireless coverage....and....there would be no obstructions like walls and/or ceilings in the signal path....tough to do in most homes, so do the best that you can.
Avoid placing the Express down low on the wall and use an extension cord to get it up as high as possible with a free look into the room.
The Express will normally "extend" what it receives, but you could try the following to see if it helps:
Temporarily, change the Wireless Mode setting on the AirPort Express to "Create a wireless network" and change the Radio Mode to "802.11n only".
(You may have to hold down the option key on your Mac while you click on the Radio Mode selection box to see the "802.11n only" choice). Then change the Wireless Mode back to "Extend a wireless network" and Update.

T500 running very very slow on specific WIFI network only???

Hi,
This problem is driving me absolutely crazy. It means that I can only use my PC at home if I use a cable connection to the router....
Problem is that on my home network my T500 is having a very very slow access to the internet via wireless. On all other wifi network I have connected to there is no issue and speed is high.
Also several colleagues have been here with their T500 and none of them experience any issues with speed. We all run on the same t500 model, ordered at the same time and with same setup. We use Windows XP.
I have tried to update all drivers, I have called my network provider who have updated router software, changed frequency and all other things they could do to avoid interference etc.
I have two other PC's at home - none of them have any issues.
I have done a web seacrh and could see that I am far from alone with this strange issue of a T500 being slow on only a specific network (often a home network). Many different routers are involved, so I dont think it is arouter problem (would also mean that my colleagues identical t500s would have issues right??).
Have there been any reolution to this T500 problem??
Best regards and with hope of "salvation" :-)
Christian

Which model of wireless card are you using? Intel 5100 or 5300 or thinkpad version?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Server very slow

i have a database wiht following configuration. My procedure is taking about 2 hours
Shared Pool: 2000 MB
Buffer Cache: 128 MB
Large Pool : 0 MB
Java Pool : 80 MB
Total SGA: 2223.568 MB
SGA Max Size : 4000 MB
Aggregate PGA Target : 300 Mb
Current PGA Allocated : 127726 KB
Max PGA Allocated : 323950 KB
Cache Hit Percentage : 96.71%
What setting can be done in the server to increase the speed

What settings? Set MAGIKS to TRUE and change TURBO_BOOST to a 100.
And yes, this is intended to be sarcastic Michael as there is no such thing as a magic button, silver bullet, special setting that can fix performance.
Nor can a performance problem be identified by the few lines of detail you have supplied.
It is like posting a photo of your car and telling us your car does not start - and we have to diagnose the problem and tell you how to fix it.
I can however see several major problems with these settings you have posted. Some which will cause performance problems for the entire database.
Shared Pool. A shared pool should never be that size. It is suppose to contain a set of sharable SQL. Do you have almost 2GB's worth of distinct SQLs? No.
What you likely have is no sharable SQLs. Which means each and every SQL that hits the database is unique. Needs to be hard parsed (expensive). Needs to be stored in the shared pool (expensive).
Make the shared pool smaller. A lot smaller. If you get memory errors on the shared pool, make it even smaller and create a job that flushes it every 60 seconds.
Use that freed Shared Pool memory to increase the Buffer Cache. This will reduce physical I/Os.
The cache hit ratio of the small buffer cache is close to a 100%. This is bad. A cache hit ratio that high usually shows that there is something very wrong with the logic of the code being executed. Why? 'cause that code is hitting the same rows (in the buffer cache) again and again and again. This drives up the hit ratio.
Why hit the same rows so many times? Process a row once and once only. Do not make multiple passes over the same row. And this is exactly what people not familiar with Oracle Concepts and Fundamentals do.
They write row-by-row processing code in PL/SQL. They do not use PL/SQL correctly, never mind applying SQL as it should be applied. Result? Very poor performing code that makes multiple passes against the same data set.
From the looks of it, you need someone on board to show you guys how to correctly use Oracle. It seems to me that Oracle is being badly abused from the little that you have posted. I shudder to think what it looks like when that database's hood is popped.

New VM Server - Very Slow Performance with QuickBooks

Hello all,
Oh the dreaded performance issues!
Okay we currently have a virtual server hosted with a different company - it has two VPU's and 8GB RAM. The contract is about to expire so we're switching to a Microsoft Azure VM. This server is running Windows Server 2008 R2 - main purpose is
to host QuickBooks Enterprise v15 - with 10 users connecting via RemoteApp and/or RD.
So for the new Azure server we selected the A3 (4 cores/7GB RAM) option - running Windows Server 2008 R2 - I know old O/S - but still need for now. We also attached a new 250GB disk for additional storage of data/programs. The test users noticed
performance issues right away so we temporarily upgraded it to the A4 option (8 cores/14GB RAM) and although it is better there are still performance issues. For example to run a statement report in QuickBooks - viewing both connections side-by-side
- it is 2x faster on the current "live" server we have hosted with the current hosting provider. On the Azure VM we also tested installing QuickBooks on the C:\ drive and then on the attached 250GB disk - the F:\ drive - same performance results
on both.
This is a new VM...fresh install....just so strange why it would be slower than the 8GB server.
Does anyone have any ideas on where we can start to troubleshoot this?
Thanks so much!

I understand the performance seen by end users are low. However, do you know what is really wrong? Do you see Azure VM using almost 80% of CPU & RAM, if not adding more RAM & CPU may not really help you.
- How is the CPU usage of your on-premise node vs Azure VM
- How is the memory usage of your on-premise node vs Azure VM
Do you have any specific characteristics for Disk IO requirement? Can you check IOPS on on-premise vs Azure?

Bridge CS6 Cache Indexing Very Slow

In CS6 the first time a folder gets indexed it takes about 5-10 times longer than for CS5. I use embedded thumbnails.
For example I have a new folder of 70 .wmv and .mp4 video files. Each file is between 100 and 240 megs. I took over 6 minutes to load the thumbnalils the first time. I dumped the cache from the Tools menu and it rebuilt in about 40 seconds, which is the same as for CS5.
Anyone else experience this?
Win7 64 bit, 8 gig ram.

Curt, I have noticed this for video files as well, it's painfully slow. I do notice it indexes much slower when accessing an external drive, but this is frustrating because I feel like it should be faster.

Mavericks Caching Server very slow on gigabit Microsoft Network

Similar Messages

Maybe you are looking for