Mavericks doesn't work with eSATA Express Card

This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.

Have you foud a solution? Experiencing the same problem with a Nikon D4 and D800E

Similar Messages

Mavericks doesn't work with HP c309a Photosmart

I just upgraded my MacBook Pro to Mavericks. Now my HP c390a Scanning software doesn't work. I connect using USB, but the software acts strange. It shows a picture of the page I scanned, but when I print, it's blank. Does anyone have any idea what's happened here, and what I can do to get it to save a file or print a file. It doesn't save, either. The documents are blank.

I just found that others are have similar problems. I tried Image Capture, but it just freezes after telling me there was an error. Is anyone writing 3rd party printing software for this problem. Looks like it's several of the HP scanners that are affected.

WiFi Sync with iOS 5 doesn't work with Airport Express used as a wifi extender?

So in our apartment we have an Airport base station that doesn't reach all the way to the bedrooms, so we use an Airport Express as a wifi extender/repeater. The Wifi sync doesn't work when connected to the Airport Express. My iPhone and iTunes can't find each other. But if I'm sitting next to the base station it works just fine. Is there a workaround for this to get wifi sync working in my bedroom? I've updated both Airports to the latest firmware versions.
Thanks
Byron

Well, never mind. It magically started working.

Airport utility 6.3.1 doesn't work with airport express

need help I can't get my airport extreme and airport express to work together on airport utility 6.3.1. The extreme works but not the express. Message pops up this version of airport utility doesn't support this base station

is there any way to go backwards with my version of aiport untitlity?
I am not recommending this, but some users have had success installing an older version of AirPort Utility 5.6 on their Macs. This is not supported by Apple, so there is no guarantee that it will work for you.
If you want to give this a try, see this thread for information and details:
https://discussions.apple.com/message/21397085#21397085

Panasonic BL-C131 wireless doesn't work with Airport Express and Extreme

I have Airport Express to create a wireless network, and an Airport Extreme to extend the wireless network. When I connect the LAN cable on Extreme and the Panasonic BL-C131, the camera can successfully detect IP and work fine. However, when I remove the cable and switch the camera to wireless mode, it can never detect the IP. I've read somewhere in the camera manual that it needs a UPnP enabled router to have wireless work. I am wondering if there is any way to confirm, since I know Airport only support Bonjour.
I really like to keep the Airport at home, or I'll need to replace it with a D-link router.

Issue solved

IPad 4 with camera connection kit doesn't work with 64GB SDXC card on iOS 7.1.1

I have an iPad 4 and official Apple camera connection kit. Even though ios 7 was supposed to provide compatibility with SDXC cards there is obviously an issue. I'm using 64GB SDXC and 32GB SD cards - both Sandisck Extreme Pro with RAW Canon 5D Mark III files. The 32GB cards work fine - thumbnails appear quickly and pictures import fine. After inserting the 64GB cards thumbnail holders appear very slowly but the thumbnail images do not appear so I cannot import. I'm a pro photographer and I need this functionality so that I can show pictures to clients on location. Any ideas?

Are the photos on the 64GB card in RAW format? If so, this may apply.
Camera Connection Kit Fix
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
 Cheers, Tom

USB/eSata express card not working on stock kernel

Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)

For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.

New airport express doesn't work with Nintendo DS

I just picked up a new Airport Express. The WEP setting doesn't seem to be standard. Instead it is this Transitional Security Network that doesn't work with the Nintendo DS or the Netgear WG511T card I have. Any ideas on how to get it to work?
15" MacBook Pro 2.16GHz Mac OS X (10.4.9) 7200 RPM HD

yeah, the DS just ***** like that. Nintendo should have given it firmware upgradability.

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Buffalo Nas Navigator2 doesn't work with Mavericks

Hello,
On my Mac Pro (5.1) Buffalo Nas Navigator2 (v2.69 & v1.71) doesn't work with Mavericks :-(
The window opens and closes immediately (approximately 2s).
According the Buffalo support, all the versions works with Mac OS (including Mavericks ?)
Thank you for your help.
Regards
Olivier
PS: the firewall is not enabled

Hello Mark,
Thank you for your message.
For your information, I have no problem with the Finder (I don't use cifs), I can see my LinkStation. The problem is only with Nas Navigator.
Yesterday I tried to use LinkNavigator: Link Navigator installs Nas Navigator and tried to connect to the Link Station, and I could see a message like "no Link Station found on the network" while I have 4 Link Station :-(
I believe that Finder and Nas Navigator do not use the same protocol.
It's curious that the support of Buffalo are not aware about the problem between Nas Navigator and Maverick.
Olivier
PS: I also use fixed IP ;-)

Why the imsg doesn't work without a sim card with iOS 7???

Why the imsg doesn't work without a sim card with iOS 7???

If it worked for you using iOS 6, then it appears iOS 7 has made some changes. Was it working before?

Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM. Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone. If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

Esata Express Card 34 for MacBook Pro 17 - Help

Hi ,
Can you you recommend Esata Express Card 34 2 port card that will work with my Mac Book Pro, OS 10.6 and WD My studio II harddrive.
At present the following brands and models do not work:
Sonnett Tempo Esata Express Pro
http://www.sonnettech.com/support/kb/kb.php?cat=375&expand=_a2&action=b404#b404
Griffin Esata Express Pro
Look forward to hearing from you.
Thank you
Richard

Has anyone used a SONNET Tempo™ SATA Pro ExpressCard/34 (Note I said "PRO" yes the expensive one) on a new MacBookPro with 4GB RAM running 10.5.8?
Hi,
I use the Sonnet Tempo Pro ExpressCard with the SeriTek/2EN2 enclosure and the Mid-2009 17" MacBook Pro (Mac OS X 10.5.8) with 4GB of memory. I have not experienced kernel panics with this configuration.
AMUG has just posted a FW800 review that also provides eSATA ExpressCard performance details. Look at the eSATA section in the Performance portion of the article for more information. The heading is: "How does an eSATA ExpressCard Compare?"
http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/pro-fw800/

ESata express card. - opinions wanted

I've got a Lacie 1.5Terabyte HD and a Lacie eSata express card. I have created 2 partitions on HD, one for installing MAc OS X and the other one for data. Inserted Mac OS X disk that came with Mac, restarted Mac, boot up fine but the Lacie drive is not shown in the list of drives I can choose from to install the OS on. Am I correct if I say that is because the Express Card needs its driver to function ? Connected the drive with fire wire and installed the OS, connected drive to eSata card again. When I go to preferences, I can select the Lacie drive to start up from but the computer do not start up from it, it start up from internal HD, Am I correct if I say it is because the eSate express card is only seen by the Mac after the driver is loaded ?

Got this when I shut the card off while in iTunes :
Interval Since Last Panic Report: 884281 sec
Panics Since Last Report: 5
Anonymous UUID: 4D3C2F74-EB9D-4CF3-BE39-C54C41DBEA4D
Wed Dec 15 20:03:20 2010
panic(cpu 0 caller 0x2aab55): Kernel trap at 0x002993d6, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x088e6000, ECX: 0x0096973a, EDX: 0x00000000
CR2: 0x00000008, EBP: 0x58b6bee8, ESI: 0x00000001, EDI: 0x0000415e
EFL: 0x00010206, EIP: 0x002993d6, CS: 0x00000008, DS: 0x58b60010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x58b6bd08 : 0x21b50c (0x5d42fc 0x58b6bd3c 0x223974 0x0)
0x58b6bd58 : 0x2aab55 (0x59616c 0x2993d6 0xe 0x596336)
0x58b6be38 : 0x2a09a8 (0x58b6be50 0x0 0x58b6bee8 0x2993d6)
0x58b6be48 : 0x2993d6 (0xe 0x48 0x10 0x10)
0x58b6bee8 : 0x969752 (0x0 0x87fc000 0x58b6bf68 0x227259)
0x58b6bf08 : 0x54c4db (0x88e6000 0x88e2f00 0x1 0x29f54e)
0x58b6bf58 : 0x54b50c (0x88e2f00 0x886191c 0x58b6bf88 0x2272c4)
0x58b6bf88 : 0x54b966 (0x88f5880 0x8861900 0x0 0x0)
0x58b6bfc8 : 0x2a06cc (0x88f5880 0x0 0x2a06db 0x88033d4)
Kernel Extensions in backtrace (with dependencies):
com.SiliconImage.driver.Si3132(1.2.3)@0x967000->0x97afff
dependency: com.apple.iokit.IOSCSIParallelFamily(2.0.1)@0x94d000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x956000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBookPro5,2 (Mac-F2268EC8)
System uptime in nanoseconds: 104372700576
unloaded kexts:
(none)
loaded kexts:
com.deepseasoftware.driver.CDSDAudioCaptureSupport 1.2.1
com.roxio.BluRaySupport 1.1.3
com.SiliconImage.driver.Si3132 1.2.3
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1
Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.42f4
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: sppciexpresscardname, sppci_othermassstorage, ExpressCard
Serial ATA Device: FUJITSU MJA2500BH FFS G1, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-868
SCSI Device: SCSI Target Device @ 0
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
USB Device: Hub, 0x05ac (Apple Inc.), 0x9136, 0x26200000
USB Device: CTH-661, 0x056a (WACOM Co., Ltd.), 0x00d3, 0x26230000
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x2220, 0x26220000
USB Device: Hub, 0x05ac (Apple Inc.), 0x9137, 0x26240000
USB Device: Display iSight, 0x05ac (Apple Inc.), 0x8508, 0x26242000
USB Device: Apple LED Cinema Display, 0x05ac (Apple Inc.), 0x9236, 0x26243000
USB Device: Display Audio, 0x05ac (Apple Inc.), 0x2912, 0x26241000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BCM2046A, 0x0a5c (Broadcom Corp.), 0x2046, 0x06100000

RE: eSATA express card/34 and External Hard Drive for MacBook Pro

I have a 17" MacBook Pro and do lots of movie editing. I need a fast external hard drive option to use. My internal is totally used up. Also need a back up drive.
I am a newbie and all of my info is based on googling. My FIRST QUESTION: Can I, and would it be a good solution, to use an express card 34 such as, Sonnet Tempo or Firtek SeriTek/2sM2-E with an external hard drive such as SeaGate 500GB or 300GB.
QUESTION 2: Why do so many of the SATA hard drives come without a case or enclosure?
And QUESTION 3: Does anyone have any recommendations or experience with the express card/34 and SATA external hard drives.
Thanks alot,
Jill Rand
And please, don't hesitate to tell me I am nuts...because I am peicing this info together without any experience at all.

1. Yes, eSATA would be a good choice for an external enclosure with a SATA drive. Alternatively, you could use Firewire 800, but it's mostly a matter of choice.
2. SATA drives a primarily used in desktop machines. SATA capable enclosures have made them usable outside of desktops.
3. I can tell you from experience to get an enclosure with a good chipset. It makes all the difference in the world. Oxford is very good for firewire. Cypress AT2+ and Prolific 3507 are excellent for USB 2.0.
I have a case with the new Oxford 924 chipset (eSATA, FW 800, FW 400 & USB 2.0) and couldn't be any happier. An added bonus; it acknowledges OS commands to power down on inactivity. Link: http://www.cooldrives.com/esata-firewire-800-enclosure-case-external.html

Mavericks doesn't work with eSATA Express Card

Similar Messages

Maybe you are looking for