Mavericks doesn't work with HP c309a Photosmart

I just upgraded my MacBook Pro to Mavericks. Now my HP c390a Scanning software doesn't work. I connect using USB, but the software acts strange. It shows a picture of the page I scanned, but when I print, it's blank. Does anyone have any idea what's happened here, and what I can do to get it to save a file or print a file. It doesn't save, either. The documents are blank.

I just found that others are have similar problems. I tried Image Capture, but it just freezes after telling me there was an error. Is anyone writing 3rd party printing software for this problem. Looks like it's several of the HP scanners that are affected.

Similar Messages

Mavericks doesn't work with eSATA Express Card

This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.

Have you foud a solution? Experiencing the same problem with a Nikon D4 and D800E

Buffalo Nas Navigator2 doesn't work with Mavericks

Hello,
On my Mac Pro (5.1) Buffalo Nas Navigator2 (v2.69 & v1.71) doesn't work with Mavericks :-(
The window opens and closes immediately (approximately 2s).
According the Buffalo support, all the versions works with Mac OS (including Mavericks ?)
Thank you for your help.
Regards
Olivier
PS: the firewall is not enabled

Hello Mark,
Thank you for your message.
For your information, I have no problem with the Finder (I don't use cifs), I can see my LinkStation. The problem is only with Nas Navigator.
Yesterday I tried to use LinkNavigator: Link Navigator installs Nas Navigator and tried to connect to the Link Station, and I could see a message like "no Link Station found on the network" while I have 4 Link Station :-(
I believe that Finder and Nas Navigator do not use the same protocol.
It's curious that the support of Buffalo are not aware about the problem between Nas Navigator and Maverick.
Olivier
PS: I also use fixed IP ;-)

WebScan doesn´t work with iPhone browser

The C4780 web interface for scanning is very practical because no driver installation on computer is required for scanning. Just point any web browser to its internal web server, start the scanning process and download the scaned image as a regular element on a web page, all using web standards, right?
Well, wrong for the iPhone browser.
For some reason, the C4780 (and probably other HP multifunction firmware) has incomaptible/untested Javascript/HTML that doesn´t work with the iPhone browser.
On preview action I´m getting a question mark box.
On scan action - where a new browser window would open on a desktop - I get nothing.
Please fix that. It could be very useful for me since I can simply scan stuff directly to my iPhone without having to open a computer.
I also posted this message under Scanning Faxing and copying.
Thank you,
Avi

On the iPhone, go to Settings...Safari...Turn Blocked PopUps off.
Worked for me with a PhotoSmart C4700.
It would be even nicer to have a simple iPhone app instead of using Safari.
(Anyone want to write it?)
-Wayne

How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
Thank you

I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

Mavericks won't work with my cannon printer/scanner Cannon MP560 what can I do to solve this?

mavericks won't work with my cannon Cannon MP560 printer/scanner what can I do to solve this?

Try restarting the device first..
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't help, try here > iOS: Troubleshooting Messages

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Quicklook doesn't work with .avi files

Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
Please help me. If you need more info about specs or something i'll be glad to give them to you.
Thank you!!!

Also doesn't work with Grapher (.gcx) documents (an Apple format).

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Mavericks doesn't work with HP c309a Photosmart

Similar Messages

Maybe you are looking for