Mavericks gets roughly 2GB in and then fails
I have a MacBook Pro that is currently running Snow Leopard (I know out dated) it is able to upgrade to Mavericks though. So I go to the AppStore and click download, it starts it goes relatively fast and gets to between 1GB and 2GB and then fails and says "unable to download check Internet connection and retry" or something to that effect. I've searched everywhere and can't find an answer. Any suggestions?
This might help: Mac App Store- How to resume interrupted downloads.
Similar Messages
-
After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!
From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting. -
Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light. -
how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting downYou have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
ISE first authorization sucess and then fail (MAB)
Hi,
Using ISE 1.1.1 and Switch 3650 12.2(55)SE6.
I have a client (computer) that should be authenticated with MAB and then the switch port should be asigned a DACL and VLAN 90. I do get
"Authorization succeeded" but directly after it fails and I can't figure out why. ISE only shows the successful authentication under "Live Authenticaions".
As you can se from the log below 802.1x fails, as it should, and then MAB succeed, asigns the VLAN and then fails:
0002SWC002(config)#int fa0/13
0002SWC002(config-if)#shut
0002SWC002(config-if)#
Jan 7 13:26:59.640: %LINK-5-CHANGED: Interface FastEthernet0/13, changed state to administratively down
Jan 7 13:27:00.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to down
0002SWC002(config-if)#no shut
0002SWC002(config-if)#
Jan 7 13:27:19.689: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to down
Jan 7 13:27:22.063: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to up
Jan 7 13:27:22.776: %AUTHMGR-5-START: Starting 'dot1x' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000
020D7C192D1
Jan 7 13:27:23.070: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to up
Jan 7 13:27:51.054: %DOT1X-5-FAIL: Authentication failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID
Jan 7 13:27:51.054: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (f04d.a223.8f43) on Interface Fa
0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.054: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0
A0005FC00000020D7C192D1
Jan 7 13:27:51.054: %AUTHMGR-5-START: Starting 'mab' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC0000002
0D7C192D1
Jan 7 13:27:51.088: %MAB-5-SUCCESS: Authentication successful for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005
FC00000020D7C192D1
Jan 7 13:27:51.088: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.088: %AUTHMGR-5-VLANASSIGN: VLAN 90 assigned to Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1
Jan 7 13:27:51.096: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT APPLY
Jan 7 13:27:51.096: %EPM-6-IPEVENT: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT
IP-WAIT
Jan 7 13:27:51.255: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A00
05FC00000020D7C192D1
Jan 7 13:27:52.027: %EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT IP-ASSIGNMENTReplacing duplicate ACE entry for host 10.90.5.1
Jan 7 13:27:52.036: %AUTHMGR-5-FAIL: Authorization failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00
000020D7C192D1
Jan 7 13:27:52.036: %EPM-6-POLICY_REQ: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000020D7C192D1| AUTHTYPE DOT1X| EVENT REMOVE
After this the proces starts over again.
This is the switch port config:
interface FastEthernet0/13
description VoIP/Data
switchport mode access
switchport voice vlan 20
switchport port-security
switchport port-security violation restrict
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 70 25 5
srr-queue bandwidth shape 3 0 0 0
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
mab
snmp trap mac-notification change added
no snmp trap link-status
dot1x pae authenticator
dot1x timeout tx-period 10
storm-control broadcast level 2.00 1.00
storm-control multicast level 2.00 1.00
storm-control action shutdown
storm-control action trap
spanning-tree portfast
service-policy input ax-qos_butnet
ip dhcp snooping limit rate 5
end
Is there a problem with the client (computer) or in ISE/Switch?Hi Tarik,
First off; thank you for helping me troubleshoot this problem.
I think the "IP-" part of "IP-ACL-IWMAC" is beeing added automaticly (in the switch maby?). I see this behaviour on other dACL too. I did not change the name of the ACL.
You seem to have a valid theory about the icmp statement. I changed it to "permit icmp any any" and it seems to work. But I can't explain why this is happening.
When I look at the debugs I see this difference
With the original ACL I get this:
%EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT APPLYReplacing duplicate ACE entry for host 10.90.5.1
%EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT IP-RELEASE
%EPM-6-IPEVENT: IP 10.90.5.1| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000053E70733F4| AUTHTYPE DOT1X| EVENT IP-WAIT
%AUTHMGR-5-FAIL: Authorization failed for client (f04d.a223.8f43) on Interface Fa0/13 AuditSessionID 0A0005FC00000053E70733F4
When using "permit icmp any any" i get this:
%EPM-6-POLICY_REQ: IP 0.0.0.0| MAC f04d.a223.8f43| AuditSessionID 0A0005FC00000055E70B8E7D| AUTHTYPE DOT1X| EVENT APPLY
%EPM-6-AAA: POLICY xACSACLx-IP-ACL-IWMAC-50eea905| EVENT DOWNLOAD-REQUEST
I tried googeling but can't find what "Replacing duplicate ACE entry for host xxx" means.
I have added debugs in attachment.
device1_orig_acl - the none working device with original ACL
device1_any_any - the none working device with permit icmp any any
working_device_orig_acl - the device that works with the original ACL
Do you have an answer to why this is happening?
Regards,
Philip -
Whenever I try to download any application, a motification pops up saying, "Could not download Minecraft: Pocket Edition lite and 6 others". The application that I am attempting to download does then pop up and start installing but beside it the Minecraft lite app appears and then fails to download. It's not a real issue, it doesn't stop me from doing anything but it's rather annoying. If anyone could help me out it would be much appreciated
I'm having the exact same problem! It's rather annoying, I know. I haven't completely solved it yet, but a temporary solution is going to App Store > Purchases, find Minecraft - Pocket Edition lite, swipe it from left to right and tap hide. The problem should now be fixed. You can always unhide it using View Account and bring up the list of hidden purchases.
I think the problem was caused by a temporary 'black out' of Minecraft (both lite and full), which made the app unavailable in the App Store for a short time and gave people who wanted to update the app the same message as you're getting right now.
I hope I helped you out a little. -
I tried to update my itune with the latest update and now i can't use itune at all . I have tried reinstalling it . all get is MSVCR80.dll and then I get Error 7 (windows erreor 126) . Need help please .
Similar problem here. iTunes11 notified me it was available. However, auto-update failed. So, I downloaded for manual update. That failed with "permission" message. I am administrator on this machine (WIN7). I tried uninstalling old version, but it failed with same permission issue. I now can't start iTunes... throws permission message. So, I'm completely dead in the water. Does this stuff get tested before it's shipped?
-
Systemd: some services starting too early and then failing
Hello everyone,
I freshly installed Arch on this new laptop (Asus Zenbook Prime UX32VD) and from the start, I wanted to have a pure systemd setup. I'm using services only and I've uninstalled initscripts and so far it's working relatively well.
However, some services seem to start too early by default and the workarounds are unsatisfactory.
Problem 1: asus-screen-brightness and asus-kbd-backlight
On this lap top, the stock screen brightness buttons do not work (yet). A script and a service file (which are both available via the asus-screen-brightness AUR package) have to be used to allow users to change the brightness via the script. The problem is, with that service enabled, it only succeeds sometimes. About have of the time booting the laptop it fails, most likely because the necessary nodes in /sys/ do not exist yet. Restarting the service manually after booting does the trick:
[root@tachychineta shapeshifter]# sc status asus-screen-brightness
asus-screen-brightness.service - Allow user access to screen brightness
Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
Active: active (exited) since Fri, 12 Oct 2012 11:23:44 +0200; 1min 1s ago
Process: 320 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/asus-screen-brightness.service
Oct 12 11:23:44 tachychineta systemd[1]: Starting Allow user access to screen brightness...
Oct 12 11:23:44 tachychineta sudo[349]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
Oct 12 11:23:44 tachychineta sudo[349]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/max_brightness: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 8: /10: syntax error: operand expected (error token is "/10")
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 10: 2*: syntax error: operand expected (error token is "*")
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/brightness: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chgrp: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chmod: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
Oct 12 11:23:44 tachychineta systemd[1]: Started Allow user access to screen brightness.
[root@tachychineta shapeshifter]# sc restart asus-screen-brightness
[root@tachychineta shapeshifter]# sc status asus-screen-brightness
asus-screen-brightness.service - Allow user access to screen brightness
Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
Active: active (exited) since Fri, 12 Oct 2012 11:25:28 +0200; 2s ago
Process: 2547 ExecStop=/usr/bin/asus-screen-brightness disallowusers (code=exited, status=0/SUCCESS)
Process: 2579 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/asus-screen-brightness.service
Oct 12 11:25:28 tachychineta systemd[1]: Starting Allow user access to screen brightness...
Oct 12 11:25:28 tachychineta sudo[2593]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chgrp users /sys/class/backlight/intel_backlight/brightness
Oct 12 11:25:28 tachychineta sudo[2593]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:25:28 tachychineta sudo[2597]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
Oct 12 11:25:28 tachychineta sudo[2597]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:25:28 tachychineta systemd[1]: Started Allow user access to screen brightness.
Exactly the same problem occurs with asus-kbd-backlight.service which is needed to allow users to control the keyboard backlight. It also fails because of missing /sys/ entries if started too early.
Problem 2: automatic login & X11
I use the method described on the wiki to autologin into TTY1 with my user and my .bash_profile contains
[[ $(fgconsole) = 1 ]] && startx
and my .xserverrc is configured as explained in this fantastically useful article by falconindy.
This way, X starts automatically and my session is properly authenticated for things like udiskie. I'm not using [testing] but instead rebuilt polkit with --enable-systemd and it's working just fine. The problem is, just like in problem 1, Xorg fails to start every now and then, failing with
(EE) No devices detected.
I don't have a full log because it hasn't happened in a while, but I'm very certain it's because the chipset isn't ready, yet.
Solutions?
I added "i915" to /etc/modules-load.d/static.conf hoping that would cover both the Xorg and backlight problems but it doesn't help. I then tried adding i915 to my MODULES in mkinitcpio.conf and rebuilding the initramfs and at least it looked like that way the problems went away but it added about 4 seconds to the time spent by the "kernel" during boot which is quite unacceptable. (Plots with and without i915 in MODULES).
I read the systemd.unit and systemd.service man pages but I can't find a way to speficy required kernel modules for a service file. I'm not sure if specifying the modules in /etc/modules-load.d shouldn't be enough (because apparently it's supposed to load for sysinit.target, which is early) but apparently it isn't.
Any ideas how I can get these services to work properly without sacrificing too much boot time?
Thank you
Last edited by Shapeshifter (2012-10-12 10:20:09)Please fill a bug report.
-
Users contacts missing after failing over and then failing back pool
We have 2 Lync enterprise pools that are paired.
3 days ago, I failed the central management store, and all users from pool01 to pool02.
This morning, I failed the CMS and all users back from pool02 to pool01.
All users signed back in to Lync and no issues were reported. A user then contacted me to say that his contact list was empty.
I had him sign out and back in to Lync, and also had him sign into Lync from a different workstation, as well as his mobile device. All of which showed his contacts list as empty.
We have unified contacts enabled (Hybrid mode with Office 365 exchange online, and Lync on prem). When I check the users Outlook contacts, I can see all of his contacts listed under "Lync Contacts", along with the current presence of each user.
If I perform an export-csuserdata for that user's userdata, the XML file contained within the ZIP file shows the contacts that he is missing.
I've also checked the client log on the workstation too, and can see that Lync can see the contacts as it lists them in the log. They do not appear in the Lync client though.
Environment details:
Lync 2013 - 2 enterprise pools running the latest December 2014 CU updates.
Lync 2013 clients - running on Windows 8.1. User who is experiencing the issue is running client version 15.0.4675.1000 (32 bit)
I have attempted to re-import the user data using both import-csuserdata (and restarting the front end services) and update-csuserdata. Both of these have had no effect.Hi Eason,
Thanks for your reply. I've doubled checked and can confirm that only one policy exists, which enables it globally.
I believe this problem relates to issues that always seem to happen when ever our primary pool is failed over to the backup pool, and then failed back.
What I often see is that upon pool failback, things like response group announcements don't play on inbound calls (white noise is heard, followed by the call disconnecting), and agents somehow get signed out of queues (although they appear to be signed in to
the queue when checking their Response Group settings in their Lync client. I've also noticed that every time we fail back, a different user will come to me and report that either their entire contacts list is missing, or that half of their contacts are missing.
I am able to restore these from backup though.
This appears to happen regardless of if the failover to the backup pool is due to a disaster, or to simply perform pool maintenance on our primary pool. -
I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud ConnectionHi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help
Did you try to charge it using the adapter or your computer?
If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
iOS: Unable to update or restore
If still not luck, your battery might have to be replaced:
Apple - Support - Service Answer Center -
Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!
Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit -
I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows -
startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).
ChrisJ4203 wrote:
Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
Chris,
This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!! I was having the exact same error messages as Mike.
Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
G
Maybe you are looking for
-
OBIEE: Criterias not appearing in Answers query
Hi All, I am trying to include two criterias based on date conditions in Oracle Answers but when I look at the query generated by BI server, I can't see the criterias included in where caluse.Please can u help! Criterias are something like this: CAST
-
How to get the index of children in JTree?
could you give a example please? THANKS
-
Hi All, I have a problem with the XY Graph representation. I'm trying to show different plot with different colours in the same graph. I realized a VI (8.2 Labview version), but it is wrong because at every iteration all the trace are re-colored with
-
Question re how iPlanet Directory Server applies the Look Through Limit.
I have a question on how iPlanet Directory Server applies the lookthrough limit... I am running an LDAP search on a 4.13 directory. The search filter is: "(&(rtrdaMaturityDate>=20020128)(rtrdaMaturityDate<=20020130))" rtrdaMaturityDate is an int
-
Storage management Sata Drivers
Hi, I installed xp on lenovo g550 by switching to IDE mode, after that i installed all sort of drivers iincluding sata drivers for sata channels, but when I switch back to AHCI mode & boot, Os will not load, Only blue screen comes & laptop restarts &