Mavericks HDMI Problem with Atomos H2S

I have recently come across a problem with Mavericks interfacing with a Atomos H2S that converts a HDMI signal to a HD-SDI Signal. I have used this device for the past couple of years and since upgrading two of my MacBook Pros to Mavericks, the Atomos H2S shows errors that it cannot recognise the signal. The exact same computer that before Mavericks worked perfectly. I have tested with other MacBooks and have found the same problem only with Mavericks.
I am aware people have had HDMI problems with certain monitors once upgrading to Mavericks but no one has posted about an Atomos H2S. Seems like a problem with Mavericks if it can't interface HDMI protocol with certain products that it could previously with.
Any suggestions on how to fix this problem without going back to Mountain Lion?

DVI seems to work perfectly fine though.

Similar Messages

  • Re: ASSISTANCE PLEASE HDMI problem with Humax DTRT...

     Hi starting this new thread as the one I have posted on has not been replied to yet and do not know how to flag it up for a reply!?
    Hi have just found this thread.  I had problems last October when my youview box which was installed in May the sound disappeared, an engineer came out and got it back again, however it has happened again this morning, have done 3 factory resets and still no sound.
    Having read this thread I have taken out the hd lead and put in a scart lead and the sound is back, took out the scart lead, put the HD lead back in and the sound is still not there, obviously a problem with the HD on the box!!!
    I was told by the engineer last year that if it happened again that a new box should be given.
    Will one of the mods please help with this one, it is just not acceptable for this to happen when we are paying for HD.
    many thanks Jules

    polish wrote:
    Hi Did that too.
    Have been contacted today and BT are sending me a new you view box on Wednesday, accepted that the one we have has a fault. 
    Hi Jules.
    Can you let the forum know if the new box sorts out your problem. It can help other customers who might be experiencing similar problems.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • After Mavericks upgrade problems with video playback from iPhoto11

    Since the upgrade to Mavericks my MBP (13” 2.4GHz 8GB medio 2010) is playing videos opened in iPhoto in poor quality and they are breaking up.
    I tried to update to Quicktime 7 (versie 7.6.6 (1709)) and then if I try to "open with" Quicktime 7 from the file which I copied to a different location(desktop) and this is showing fine.
    In iPhoto the .mov files are apparently still openend with the old quicktime version (10.3(727.1))
    Also I upgraded to iPhoto 11 but still the same problem and tried to do a system check via starting up in safe mode but no go.
    Does anybody have an idea?
    thanks

    You might try the following:
    1 - select a video file in the Finder and bring up its Info window (type Commnad + i).
    2 - go to the Open With menu and select Quicktime Player 7.6.6.
    3 - click on the Change All button.
    4 - reboot, relaunch iPhoto and try again.
    OT

  • Maverick causing problems with mission control

    hi,
    I have a early 2013 Mac book pro. I just upgraded to Maverick and I have been facing issues with mission control. When I swipe fingers up on touchpad to open Mission control, occasionally it lags. Basically the lagging is prevelant with swipe and pinch gestures on touchpad, the transitions are not smooth. Please help me fix it.
    Thanks in advance,
    Kritarth

    I'm not sure that what I'm seeing is this same problem, but it's similar. And worse.
    I have a MacBook Pro (Retina, 15-inch,Early 2013), and several times since I installed Mavericks both Mission Control and 4-finger swiping have stopped working completely. A restart always fixes them. They both fail at the same time--either both work completely, or both don't work at all.
    I'm guessing there's a lurking Mavericks bug, somewhere.
    Ed

  • Mini DVI to HDMI problems with 46" Samsung TV

    I bought a cable with mini DVI to HDMI at the Apple store. My new TV works great with a PC laptop, but my MBA (13") doesn't seem to be sending all the info to the TV. I get some windows, but not all of the window. I think I'm dead in the water here. Any ideas?

    Hey redhead,
    I have the same setup. Try messing around with the cable, it might not be properly connecting. Mine is pretty finicky and can lose connection if it's not sitting "just right". Also, just in case, click on "gather windows" on the bottom of the display settings dialog box. Then check to see if the Toshiba settings dialog box shows up. If it does, that means the TV is actually connected but the resolution settings have not be properly set yet. So if "gathering windows" gets you your TV's settings window, change the resolution to "1080p" if it offers that. If it doesn't, just go through all of the resolutions until you find one that works/works best.

  • Since Mavericks install, problem with gmail

    Since I installed Mavericks, the only way I can get mail from google mail is to take the gmail inbox offline and then online again before any mail comes in from my gmail account.   Any ideas on what I can do to fix this?   I'm current on Maverick updates (including the Mail update).  

    Have you done the Mail update?
    Mail Update – 7 Nov 13
    Troubleshooting sending and receiving email messages
    Gmail with Apple Mail
    Gmail with Apple Mail (2)
    Gmail with Apple Mail (3)
    Gmail with Apple Mail (4)
    Gmail with Apple Mail (5)

  • Maverick create problem with original softwares

    I've installed Mavericks and Poser does not work and software as Indesign cs6 does not work at better. Pages became white when I'm writing etc etc...

    Hi, first of all Thanks...
    I did it and I see the Line about Indesign is red... This means something? And watching this... I see 2.55 GB Adobe InDesign CS6... I have just a book without images open...
    Poser is Version 7 but with Lion was working...
    Hardware Information:
              iMac (27-inch, Mid 2011)
              iMac - model: iMac12,2
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              AMD Radeon HD 6770M - VRAM: 512 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              ChmodBPF - Path: /Library/StartupItems/ChmodBPF
              ProTec6b - Path: /Library/StartupItems/ProTec6b
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 5:37:57
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Zero11 (disk0s2) /: 999,35 GB (62,72 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-STDVDRW  GA32N 
    Top Processes by CPU:
                  25%          iTunes
                   1%          WindowServer
                   1%          EtreCheck
                   0%          coreaudiod
                   0%          fontd
                   0%          AdobeCrashDaemon
                   0%          Google Chrome
                   0%          softwareupdated
    Top Processes by Memory:
              2.55 GB            Adobe InDesign CS6
              352 MB             Finder
              238 MB             mds_stores
              221 MB             Mail
              197 MB             com.apple.IconServicesAgent
              195 MB             iTunes
              164 MB             Google Chrome
              164 MB             WindowServer
              156 MB             softwareupdated
              139 MB             Google Chrome Helper
    Virtual Memory Statistics:
              197 MB             Free RAM
              3.48 GB            Active RAM
              3.25 GB            Inactive RAM
              1.07 GB            Wired RAM
              2.79 GB            Page-ins
              0 B                Page-outs

  • Has Yosemite fixed Maverick's Mail problem with Group email addresses?

    Does anyone know if Yosemite has fixed the problem that Maverick's Mail program had with Contacts? Maverick's Mail program cannot show Group Address names in the email "To:" window. By default, it shows all of the email addresses in a Group rather than the Group name. The work-around requires putting Group Addresses in the "Bcc:" window. Has that problem been fixed in Yosemite?
    Many thanks,
    Bob Winckler

    Hi Barney,
    Just found out that Maverick's problem with Mail's Group address procedure has resulted in my email accounts being put on hold by my Internet Provider. I'm the president of a local club, and I routinely send out emails to 200+ email addresses several times a month. Since Maverick's Mail now doesn't keep Group addresses hidden when shown in the email "To:" window, we have to put those Group addresses into the "Bcc:" window.  The first couple of times that I did that, the emails went through, but the third time that I tried to send out such an email, my Internet Provider shut down my email account with the statement "Your ability to send new mail has been suspended as a high volume of suspicious mail has been sent from your account recently. Please contact your IT administrator."  The IT administrator required me to run a virus check and then set a new password for my account before they would reactivate it. In my discussions with several of my Internet Provideer's tech reps, it appears that the way the way that the Internet Provider has their server's security system set, a high volume of email addresses in the "Bcc:" section of emails is enough to shut down an account as suspicious. Until Apple gets this problem fixed, my only options are to switch internet providers (after finding one that will let high volumes of "Bcc:" go through) or switch to an older Mac operating system, which I've done (now using an ancient iMac 400DV running Tiger (OS 10.4.11).  Given the high number of businesses, etc., likely to be using Macs, I'm really surprised that Apple has let this problem with Maverick's Mail program go uncorrected.
    Best regards,
    Bob W

  • I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

    As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
    I do this and no matter what I seem to do this message continues to return.
    Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
    Many thanks
    Mike

    Hello John
    Sorry I haven't got back to you sooner.
    Thanks very much for your help, your solution solved my problem.
    Thanks again and kind regards
    Mike

  • Problem with Displayport and HDMI on 15pro Late2013

    I just got a new 15pro few days ago(the one with 750M video card)
    When I trying to connect it to my external monitor(DELL U2913WM 2560 x 1080) by miniDisplayport(to miniDP port), everything shown on my external monitor looks like I'm using a VGA cable instead. All images and texts are not clear.
    I have another windows PC, whcih is using HDMI-HDMI with this monitor, everything are very clear. ==> No problem with the HDMI cable and monitor.
    Then I tried to connect my MBP with HDMI-HDMI cable, both screen went dark for every 3 second peroid(and it is still not clear when the screen is on), again and again
    Any suggestions?
    Thanks.

    Thanks, I finally find the same question here,posted a year ago.
    https://discussions.apple.com/thread/4249436?start=30&tstart=0
    But there is still no solutions today.
    Thanks God! I found a way to solve that.
    MonitorMenu-DisplaySetting--Sharpness----Set it to 0. This finally solved my problem.

  • Problem with replies in Maverick's mail.  Originating emails send fine.  When replying to an email (various addresses) the reply is hung up and can not be sent.  Option becomes put in draft, delete, etc.  Any suggestions would be helpful

    Problem with replies in Maverick's mail.  Originating emails send fine.  When replying to an email (various addresses) the reply is hung up and can not be sent.  Option becomes put in draft, delete, etc.  Any suggestions would be helpful.  Mid 2013 iMac.

    I don't know how rare this is.  I went a week or so without a problem, and now it's starting to recur.  Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on.  Further, it will send the same email over and over during this madness.
    This is a show stopper.  If there isn't a software fix soon, I may chuck this phone in the garbage.
    Post relates to: Treo 800w (Sprint)
    UPDATE:  The problem comes and goes.  The next day, no changes to the treo, everything workeds.  Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming.  I've since turned off roaming, and haven't had a problem for several days.
    Message Edited by slrichardson on 12-22-2008 01:12 PM

  • [SOLVED]Problem with sound in HDMI

    Hello good society of Arch
    Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
    I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
    I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
    Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
    I have never encountered problem with Arch that i cant solve by using this forum and google
    Thanks
    Last edited by Vaski (2010-08-21 01:08:42)

    cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
    af=resample=48000
    I will look at this when i come home from work, thanks.
    nTia89 wrote:have you already read our wiki ?
    Yes i have, and sound is working, well most of the time.

  • Anyone having a problem with iMovie in Mavericks v 10.9.3 ? when previewing the a slideshow the colors all disappear after the first image.

    Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.

    Is your problem with iMovie as the title suggests or with iDVD?

  • Problem with maps in Mavericks on iMac

    I have a problem with my Maps on Mavericks.
    I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
    As you can see, it just stays blank all the time.
    I'm  also running Parallels 9 and don't know if that has something to do with problem.

    Spent days trying various fixes, but this is the one that did it for me. Thanks!
    livetowin
    Re: Problem with maps in Mavericks on iMac 
    Dec 8, 2013 7:14 PM (in response to robin1943)
    Try this
    Since my date and time were incorrect and imessage was not working as well, I tried this
    1. Go to system preferences and click date and time
    2. Select date and time tab
    3. Uncheck "set date and time automatically" and manually enter the correct time
    4. Go to time zone tab and uncheck the box there too
    5. Go back to date and time tab and now check the box "set date and time automatically"
    6. Then check the box in time zone as well
    Now open maps and see if it works!

  • Since installing Mac Mavericks all my friends with Macs and I have problems with the cursor disappearing, only in Firefox, Safari is fine...

    I have stopped using Firefox as nothing I have done has fixed this problem. I have tried shutting down Firefox and rebooting it, I cleared all my add-ons and then added adblock back (that's the only one) but it still doesn't work. I've deleted large files so that I have more space - I can't think of anything else that will work. I have spoken to four of my friends with Macs and they are all having the same problem with Firefox since Mavericks.

    Hi thanks very much for your reply. I did a few things like delete my add-ons and I don't have the problem of the disappearing cursor (sounds like a Sherlock Holmes story) any more but it seems to have been a mac issue as there were many complaints on the Apple forums of the cursor disappearing since the Mavericks OS and not just in Firefox but in multiple programs. Looks like they've fixed it somehow!

Maybe you are looking for

  • Open second vi and close the first vi

    i want to open the second.vi to be open from one.vi and,, and at the same time i want to close one.vi,,, i find may answers in labview about this but any of them could not setisfy my requirment,,, manisha

  • Error While running the prgram in Second time...Frank Could u pls check th

    Hi, I am using JDeveloper 11g. I have created a web application using ADF Business Components. Here I created a Bar Graph. When I am running the first it works fine. But when I try to run the second time it is giving some errors like Error 500 - Inte

  • Why do I have to buy Transformers II ?

    ... and other movies I've never liked that online video rentals are 24 hours when the old brick-n-mortar gave me a week or two. I would rent more if I was given even a few days - like through the weekend, 'ya know? The price of renting online bugs to

  • Development plan by Employee - Talent Management

    Dear Luke, Greetings. From one of your blog understand very clearly that Development plans are only accessible by TMS and Manager. And not by Employee. But this could be well accepted when the it comes to larger organization. In the event of small or

  • Alternative content for a user without Flash

    I want to incorporate a Flash navigation bar into my new site, but I realise that some users will not have Flash installed on their pc. Is there a way of having an alternative HTML menu appear if the users pc doesn't have the flash plugin. Cheers S