Mavericks isn't recognizing my monitors - manufacturer or resolution. Why?

Macbook Pro, 10.9.4, 16GB of RAM, two Genuine Apple Thunderbolt to DVI adapters.
I am trading up -- old: two 1600x1200 Samsung Syncmasters new: two Dell U2413's 1920 x 1200.
When I plug in the new monitors, I still only get 1600x1200 resolution and now stretched on these new 16:9 displays.
The Monitors dialog box says "Syncmaster" still, and 1920x1200 is not an available option under scaled resolutions.
Is there an approved way to fix this? I downloaded SwitchResX trial - but it still sees the monitors as "Syncmaster 1" and "Syncmaster 2". It allows 1920x1200 as a display resolution I can select, but in the advanced details for that view, it shows 1600x1200 scaled to fit 1920x1200?
It's really bizarre. I've never seen an Apple OS behave this way with regard to monitors - it's always "just worked instantly"

I am just going to go ahead and answer my own question here.
I forgot to mention: I am using an Adderview Pro Multiscreen Dual-DVI KVM switch -- and that had to be reset to recognize the new displays!
Once I figured that out - booyah! It "just worked"

Similar Messages

  • Lenovo B570 isn't recognizing a monitor through a HDMI connection.

    The title says it all really, every time I connect my B570 to my Benq monitor using a HDMI to DVI cable, the laptop fails to detect anything.
    When I connect the laptop and screen using the VGA to VGA cable, the laptop picks up the screen without any trouble at all. I bought a new HDMI to DVI cable and the laptop is still failing to recognise the monitor.

    hi flytch
    can you check if the cable works first? (you can use another computer to check it if you have)

  • WacomTablet driver installed 612-5, Mac Os Mavericks. The tablet isn't recognized. What can I do? Thanks

    WacomTablet driver installed 612-5, Mac Os Mavericks. The tablet isn't recognized. What can I do? The tablet is an old A3 intuos and doesn't work with the latest drivers. Thanks

    I 'll do that also. I just thought to post my question, just in case.. Thanks anyway

  • Installed Boot Camp; my external display isn't recognized upon boot in2 OSX

    Man... Apple should really allow more characters in the Subject line. Here's a fuller subject:
    "I installed Boot Camp and now my external display isn't recognized and receives no video upon booting into OSX (10.5.8)"
    Unplugging and replugging the monitor resolves the issue until the next reboot. Had no issues prior to the installation of Boot Camp. (Windows 7 works really well, btw. I've had no issues there amazingly).
    Has anybody seen this before and could point me towards the light? Thanks in advance,
    Dave

    I'd just like to add that this no longer works with OS X Lion 10.3.8 either...  Get your **** together Apple.  It's called MacBook "Pro" for a reason.

  • HT3775 MPEG-4 movie the quick time I get the following msg---1080p.mp4" could not be opened. The movie's file format isn't recognized.

    MPEG-4 movie the quick time I get the following msg---1080p.mp4” could not be opened. The movie's file format isn't recognized.
    Is there any way to make the movie work....anybody can help????

    Hi,
    Not all .mp4 items are created equal as there are many subvariants.
    You may want to Install Perian and/or Flip4Mac
    8:57 pm      Monday; January 27, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Ipod isn't recognized by itunes and computer but it still charges

    i've tried a hard reset but that didn't do anything.
    when i plug it into my computer i get a message saying that the USB device isn't recognized.
    so, when i look at it in device manager the ipod shows up as a unknown device
    and the device status says "there are no drivers installed for this device".
    anybody know what to do?

    Your iPod's battery may not be charged. Plug your iPod in, wait for a moment, press a button to turn it on, and check the screen. Here are some easy steps to get the most out of your battery. Note: On recent iPod models, when the battery is completely empty, your computer may not recognize your iPod for up to 30 minutes even though it's connected and charging.

  • I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

    Model Name: iMac
      Model Identifier: iMac12,1
      Processor Name: Intel Core i5
    I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

    "If you've forgotten the Apple ID password how did you log in to make the last post?"
    Exactly! The password I used to log on here and write my post I figured was the same Apple ID password I would use to reset my computer login password. But my computer isn't recognizing it as the correct password so it wont let me update my login password. I have 2 user accounts on my computer.
    As far as the link you provided, I already looked to that for help earlier. It states:
    Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it, then provide an administrator name and password. Select a user, then click Reset Password.
    I did these steps, but I don't remember my admin password. The question is: How do I reset my admin password so I can reset my log in password.
    Is my admin password the same password I use to log onto this website to post questions? If so, like I said previously, I already reset that password and my computer isnt recognizing it.

  • I had to get my hard drive replaced from Apple, I lost all of my music obviously.  My question is, how can I get all my music off of my iPhone onto iTunes?  Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

    I had to get my hard drive replaced from Apple, I lost all of my music obviously.  My question is, how can I get all my music off of my iPhone onto iTunes?  Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

    You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.

  • I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    For Windows see http://support.apple.com/kb/TS1538
    For Mac OS X see http://support.apple.com/kb/TS1591

  • I restored my macbook and now my ipod isn't recognized by itunes

    I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

    Have you worked through each and every single suggestion in this Apple support document yet?  If not it would be a good place to start.
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • My 5th generation iPOD isn't recognized by iTunes?

    When I plug my iPod into my computer, iTunes opens, but my iPod isn't recognized. Anyone else have this problem or any suggestions?

    By all of those suggestions, do you mean the ones I mentioned in the paragraph about or the ones in the support article I linked? Does this 5G iPod via still power on?  DId you try connecting it to another PC or Mac to see if it is recognized there?  Did you check the dock connector for any signs of debris or damage to the pins that could be preventing a connection to your PC?
    Any idea how long the average iPod should last? Ours if from 2006.
    Most people never get the iPod to last 6 years, so consider yourself lucky. That's quite a time span!
    B-rock

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • Ipod 5th Gen 60gig isn't recognized by Windows XP

    Hi,
    My 60 gig 5th gen Ipod isn't recognized at all by my PC. I tried different usb ports already, and in all of them when i connect the Ipod the PC just makes the typical sound when coneenecting any usb device and after that it doesn't shows the ipod neither in iTunes neither in My Computer but in the iPod screen appears te forbidden sign with the message "do not disconnect" and the ipod normally charges.
    See ya.

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.

  • Lumia 1020 isn't recognized by Windows 8.1

    I just installed Windows 8.1 and when I plug in my Lumia 1020, it isn't recognized.  In Device Manager it shows up under "Other Devices" as "Nokia Lumia 909 (RM-877)".  I understand that the 909 and the 1020 are the same so no mystery there.  When I right click and tell it to update the drivers, it says that there are no drivers available.
    I read in another thread where someone was having a similar problem and powering off the phone and then reconnecting it via the USB cable seemed to cause it to be recognized.  I am not having any success doing that.  I have gone through the steps listed by Microsoft also without any luck.
    I also have a laptop running Windows 7 and my phone is recognized by that computer without any trouble at all.  So, I don't *think* it is a hardware problem.
    I went so far as to re-install my OS.  I patched it, updated the BIOS and didn't connect or install anything else (besides the patches) before connecting my 1020.  Once I hooked up my 1020, still nothing.  Can't update drivers from the internet or from the downloaded drivers.
    What is going on?
    Thanks in advance for any help!

    drives64bits wrote:
    I can´t conect
    Look at other devices that are not loaded correctly.  Not the USB
    If your operating system did not come with Windows Media Player, install the Media Feature Pack for your version of the operating system.
    http://windows.microsoft.com/en-US/windows/download-windows-media-player
    Use the USB cable that came with the phone.
    Connect the phone to the PC.  Turn it all the way off, hold power button and slide the screen down. The phone will turn back on and it will be detected, drivers should load.
    You should see it in windows explorer. It should install in 'portable devices' in the device manager.

  • My ipod isn't recognized by any computer & itunes, and desplays a sad face.

    i have had my ipod mini for eleven months and this is the first problem i have had with it.
    i went on a vacation to flordia, and while i was there my ipod crashed. i had dropped it once a few days before the crash, but it continued to play my music after i dropped it.
    when i go to turn it on the apple logo appears, then the depressed ipod.
    my ipod isn't recognized by any computer or tunes. when i plug it into my computer, the 'do not disconnect' screen doesn't even appear. all that happens is the apple logo screen, then the depressed ipod screen, then a recharging screen appears that is stuck on the lowest point possible.
    i have already tried the "five R's" and everything else in the support pages, and so far they have helped me none. all they do is bring you around in huge circles, and you end up on the page you started on.
    i run a windows xp, and have everything fully upgraded.
    i know, i know, many of you are having similar problems, but could you please only post if you have an answer, thanks.
    -xb
      Windows XP  

    I know!!! It worked just fine one day, computer recognized it and i could add or remove songs at me leisure, but now I can't even charge it on a computer becasue it doesn't exsist to it. I also tried the five steps, but you can't restore the settings on it if the computer can't find it. Finally I had my sister bending the charge piece in the ipod just for it to show up, I restored it and it didn't make a bit of difference! I lost all 800 songs on it but I still can't charge it or add songs. If you find anything out, let me know!!!

Maybe you are looking for

  • Cannot Update Contingent Worker Number with API when no assignment exists

    Hi I am using hr_person_api.update_gb_person to update Contingent Worker Numbers (NPW_Number in PER_ALL_PEOPLE_F). This works fine apart from one exception. I get the following error: ORA-20001: You cannot enter a Contingent Worker number because you

  • Help required in commit operation

    hello , i have written on procedure , in Which i am selecting the data from table1 and then insert the data into table 2 and then i am applying a commit. the table 1 contains more tha 4 laks(0.4 million) records. now i really need your suggection abo

  • Insufficient memory error

    Hi, We have around 3850 items. while we tried to run the Inventory Audit Report, system throughs error like 'SAP Business One has run out of memory; It will be shut down automatically in order to prevent data inconsistencies. Anybody knows, Please gi

  • Not in GZip format...

    On the download page for the linux version of 9i Lite, it says to gunzip, when in fact, the file I recieved via the download was NOT gzipped at all. It was simply a renamed cpio. Just thought I should bring that to your attention before you get a flo

  • Business Partnaire - what is the bapi to create note ?

    Hello, what is the bapi to create a note inside a business partner ? tks,