Mavericks Mail IMAP Server Connection Problem

I manage a number of IMAP servers for clients. One server no longer connects since I upgraded to Mavericks - it basically tells me the settings are wrong, though they have not changed for quite some considerable time.
The account works fine in Thunderbird (created for testing this morning), so clearly there is a bug of some sort in the Mail code. I'm connecting via IP address, as the server doesn’t host a live domain; I have connections working OK to other servers by IP address, so it's not clear why this one is not working.
How does this get reported to Apple?
Thanks,
Des

Open Mail App. Go to the Mail Menu and select Mail Feedback. This will provide more than just written feedback regarding the specific Mail Appl.

Similar Messages

...Not alone with problems on "Mail" app server connection, iMap!!!! I believe Apple is strengthening their server farm. Has been out for over a week; they were wise to have the iCloud also in the cloud.

Not alone with problems on "Mail" app server connection, iMap!!!! I believe Apple is strengthening their server farm. Has been out for over a week; they were wise to have the iCloud also in the cloud. Be patient!

Have you considered the possibility that the third party fan software might itself be implicated in the issue, theosib (or perhaps something else introduced at about that time?).
My inclination in a situation like this would be to back up your drive to an external, wipe the drive, and do a clean installation. At the very least I'd try an archive and install.
Do you have plenty of free space on the drive? Once you get things down below the last 10 to 20% things can get hairy at times, and may not be fixed as a result of simply freeing up some room, as free space fragmentation is likely to have set in.
As far as RAM goes, either "Rember" - http://www.kelleycomputing.net:16080/rember/ or, better still, but less user friendly, "memtest" - http://www.memtestosx.org/ does a much better job of checking your RAM than the AHT. Still takes a while to run for a thorough test, but much quicker than the approach you are planning on using.
You might also want to use "Activity Monitor" to check for any applications with progressive "memory leaks" or that are acting as CPU hogs, given your symptoms
Cheers
Rod

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.

Yes! Same thing happened suddenly to my Z10 this morning. No AOL.

M website in Verizon's Site Builder can't be crawled by Google-server connectivity problem-

I made a one-page website in Verizon's Site Builder program, then "added my site" at Google. Google says it can't crawl it. Don't know if crawling is necessary but seems good to have it working regardless. Google says there's -server connectivity problem-. Would that be Verizon? (I purchase FIOS)
I have another website made in same Verizon program & don't have a problem with it at Google. It's almost identically made, & also one page. So why the difference?.
Anyone know how to fix or understand this? How to correct server connectivity problem? or how to reach Verizon support service about this? (no support is available at Site Builder) .
FYI, the -add a site- & website tool dept. at Google is called Webmaster Tools. Free tools for websites.
I'm so disappointed all my efforts contacting tech supports at Verizon hasn't offered concrete answers. They pass me on to other depts. one after another...
Would appreciate direction with this. Many thanks.
Solved!
Go to Solution.

I've gotten a response, and it would seem that since my webpage comes up fine when typed in browser, that there isn't anything more that Verizon can provide. That it would be on Google's end to assist. But Google says there is a server connection problem.
In the end, the website seems to work fine and I'll leave it at that. And for whatever crawling provides, I guess I will pass on that.
thanks for the response.
also, the area for == private support messages == can be located below your post via your profile page. (i think that's how it works.)

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

Mail server connection problem

Mail in my macbook pro from time to time interrupts mail server connection (mac mini server). As i discoveredn turn off turn on wi fi reestablish connection. Does anybody know how to solve the problem?

Check the server log for details on the local mail server activity. These mail server logs are available via Console.app or via Server.app.
To verify local DNS services — a very common cause of problems — launch Terminal.app and issue the following harmless, diagnostic command:
sudo changeip -checkhostname
You'll need to enter an administrative password for the sudo, might then see a one-time message describing the use of sudo, then some server network configuration information if and as available, and finally an indication that there are no changes required, or that there are DNS or network or other issues.
You'll need to be referencing your local DNS server — you cannot reference your ISP DNS servers, nor any other off-LAN DNS servers here — in your clients. This either by explicit configuration in the clients, or via the DNS server settings distributed by your local DHCP server. Do not reference both local and off-LAN DNS servers, either — just your own local DNS server(s) on your local NAT'd network. No off-LAN off-NAT'd-network DNS servers can provide valid DNS translations for your local LAN, and SMTP traffic is based on properly configured DNS.

Server connection problem trying to scan document to e-mail

SERVER CONNECTION ERROR WHEN SCANNING DOCUMENT TO E-MAIL

Hey @oooth,
Welcome to the HP Support Forum.
I understand you're unable to currently use your HP ENVY 5530 e-All-in-One Printer's scan to email feature. I would like to assist you with this.
Are you an Instant Ink subscriber? If yes, please click here and scroll down to review the steps that I posted in my reply. These suggestions are only applicable to Instant Ink users.
If you are not an Instant Ink subscriber, try the following:
Touch your printer's wireless icon  to confirm that you're connected to your wireless network. If not, click here for instructions on how to get connected.
Next, touch  to ensure your webservices are enabled. (If you are seeing an @hpeprint.com address you are connected).
If your ePrint/webservices are not enabled, touch OK to complete the setup. Or, if you try to enable them and you run into the same server connection issue, I recommend you restore your printer's factory defaults and start from scratch with your wireless and webservices setup. Also follow these steps if you have ePrint enabled, but still cannot use scan to email. Here's how:
Touch Wrench/Setup Icon
Touch Tools
Touch Restore Factory Defaults
* Note that if you complete these steps you will be resetting your printer's wireless, webservices, scan to email setup and any other customized settings. If you have a customized ePrint address you will lose it permanently. Click here for more information on custom ePrint addresses.
After completing the restore, click here for instructions on how to setup scan to email.
Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below.
Thank you for posting in the HP Support Forum and have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How To Fix Mavericks Mail Unable To Connect Error

Mavericks Mail.app stopped being able to authenticate to any IMAP or POP mail servers -- my own OS X Server.app, iCloud, Gmail, etc. iOS clients could connect just fine, and I see that many, many others are having this problem as well. I solved this, but essentially by throwing in the towel and using these posts to bring Mavericks Mail and the login Keychain to their factory settings.
The following worked for me, and blowing away the Mail settings and Keychain were both necessary. If anyone has a less drastic solution, please post it. Make sure you backup any necessary certificates or messages before wiping this all out.
sudo rm -fr ~/Library/Caches/com.apple.mail ~/Library/Saved\ Application\ State/com.apple.mail.savedState* ~/Library/Application\ Support/AddressBook/MailRecents-v4.abcdmr* ~/Library/Containers/com.apple.mail ~/Library/Mail ~/Library/Preferences/com.apple.mail*
Keychain Access>Preferences>Reset My Default Keychain
I also used Disk Utility to fix permissions and did a safe boot to clear out a bunch of cache, though these steps didn't fix this specific problem.

I posted too soon -- this problem reappeared. Per this article and Apple support page, luckily a simple rekerberization of the OD Master fixes the problem. My fingers are crossed that it stays fixed.
This worked:
sudo touch /var/db/openldap/migration/.rekerberize
sudo killall PasswordService
# start Server.app, restart Mail

Icloud IMAP server connected to itunes password?

I just changed my itunes password and now I get a message on my computer about icloud: The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “(me)”. How do I solve this and are the two passwords connected somehow?

That depends on whether you are using the same ID for iTunes and for iCloud - some people have separate ones, some have the same, and it rather sounds as if you have the same. The iTunes Store window shows you login in the top right-hand corner - if this is your iCloud email address then you need to change the password in System Preferences>iCloud.

Soap server connection problem

in jdeveloper 9.0.2 i am trying to develop and deploy webservice. After starting embeded oc4j engine from the command prompt i m unable to get this url http://<hostname>:8888 from the browser .
Also facing the problem while running the new soap server connection wizard. while testing the connection i m getting this error.
Testing connection...
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html", must be: "text/xml". Response was:
<HTML><HEAD>
<TITLE>ERROR: The requested URL could not be retrieved</TITLE>
</HEAD><BODY>
<H2>The requested URL could not be retrieved</H2>
<HR>
<P>
While trying to retrieve the URL:
<A HREF="http://<hostname>:8888/soap/servlet/soaprouter">http://kanti:8888/soap/servlet/soaprouter</A>
<P>
The following error was encountered:
<BLOCKQUOTE>
Unable to determine IP address from host name for
<I>kanti</I>
</BLOCKQUOTE>
<P>
The dnsserver returned:
<BLOCKQUOTE>
Name Error: The domain name does not exist.
</BLOCKQUOTE>
<P>
This means that:
<PRE>
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
</PRE>
<P>Your cache administrator is <A HREF="mailto:root">root</A>.
<br clear="all">
<hr noshade size=1>
Generated Fri, 14 Feb 2003 13:05:51 GMT by firewall (Squid/2.4.STABLE6)
</BODY></HTML>
     java.lang.String org.apache.soap.rpc.Call.getEnvelopeString(org.apache.soap.transport.SOAPTransport)
     org.apache.soap.rpc.Response org.apache.soap.rpc.Call.invoke(java.net.URL, java.lang.String)
     org.apache.soap.rpc.Response oracle.jdevimpl.webservices.util.JDevServiceManager.invokeMethod(java.lang.String, org.apache.soap.rpc.Parameter)
     java.lang.String[] oracle.jdevimpl.webservices.util.JDevServiceManager.list()
     void oracle.jdevimpl.webservices.wizard.connection.TestConnectionPanel$2.run()
Unable to connect to SOAPServerConnection1 (http://<hostname>:8888/soap/servlet/soaprouter)
Connection test failed: unable to connect
right now i m ready to use any web service either
1 > j2ee web service .(or)
2 > soap web service
but both are not working .
Pls help me on this issue.
regards mangesh

If you use HttpsURLConnection for this, it will work on java 1.4.1, but not on prior releases. It will (as far as I can tell from experiment) use the time that the server provides for Keep-Alive.

Restore deleted mails (IMAP server)

Hi,
Many of the mails are accidentally deleted from my Inbox. Trash is empty as well. Is there any way to restore the deleted messages.
Server being used is an IMAP server.
Any pointers will be helpful.

There is an article on MOS:
How to Recover Deleted and Expunged Mail Messages? (Doc ID 1319036.1)
https://support.oracle.com/rs?type=doc&id=1319036.1
If the messages have not been cleaned up yet, that should help.

Data Server Connection Problem in MII 12.1 Version.

Hello Experts,
I am using two instances of MII 12.1.8 Build (20), at which am recently facing problems in the Data Server Connections.
Am not able to connect to the Data Servers using connectors [IDBC, Virtual IDBC].
When I checked the status of the servers, it is showing the status as running but there is no available connections.
When trying to create the query templates I dont get the available tables list populated too.
The driver details for jdbc used are the default ones,
For IDBC,
JDBC Driver : com.inet.tds.TdsDriver
ServerURL : jdbc:inetdae:<ip_addr>:1433?database=<db_name>&sql7=true
For virtual IDBC,
ServerPackage: com.sap.xmii.Illuminator.connectors.Proxy
The error that we got in the LogViewer.
Log Record Details
Message: Unable to get a connection from the pool
Date:
Time:
Category: /Applications/XMII
Location: com.sap.xmii.Illuminator.tools.database.ConnectionHolder
Application: sap.com/xappsxmiiear
Thread: Thread[HTTP Worker [@2017129105],5,Dedicated_Application_Thread]
Data Source: j2ee\cluster\server0\log\applications_00.log
Arguments:
DSR Transaction: 603b4f9bad3011e0c6f000001b57fb82
Actually the connections were working fine, in both the MII instances am working on (of the same build).
Now they both have gone down, all of a sudden
Please suggest the checks and corrections, I should do to overcome this hurdle.
Thanks for any help in Advance.
J Linovaz

Hi Anshul,
Thank you for your kind response.
I am uisng SQL SERVER 2005 and I have also tried with MS JDBC driver versions 2.0 and 3.0.
and
    Connection Status   in DATA SERVER tab.
Server Name ABC
Connector Type SQL
Status Running
No. of Used Connections
No. of Available Connections
Max. No. of Used Connections
Max. Wait Time
This is the status that i am getting and there are no available connections..
Everything was working fine before two days and we are not trying anything new

Server Connection Problem - connecting to ePrint

Hi, I've just purchased a new HP Photosmart 5515 printer. I've connected it to my PC over wireless successfully. My PC is fully connected to the internet. There is no network involved. I cannot get the ePrint function working. When I select the ePrint button on the printer I get the following message - 'Server Connection Error'. I am requested to 'Enter Proxy'. I cannot fing any instruction how to set proxy seettings to get this operational. Could you please assist me with this problem. Many thanks

I hope you are doing well and welcome to the HP forum;
In order to take advantage of all the features the ePrint service has to offer, your ePrint-enabled HP printer must be directly connected to a network with an active Web connection. You need and router or Access point which is reffer to as an infrastructure network, If you have not installed your product on a network, select your product from the following list to review complete network installation instructions.
If you complete the previously mentioned steps you can do this after to set your printer with an static (non changing) IP Address and google dns public servers to ensure that this works properly
(sometimes the preset DNS server assigned by you ISP will create conflict)
Let's do this;
Follow these steps to print a network configuration page from the HP product.
On the product-control panel, touch the Wireless icon ( ), or touch Wireless .
Touch Print Info . The product prints a network configuration page. After you have printed a network configuration page or wireless network test report, check for the following:
Does the network configuration page or wireless network test report indicate any problems? If so, follow the recommendations on the report to try to resolve the issue.
Do the reports indicate that the HP product is connected to your wireless network? The network name that the HP product is connected to shows on the network configuration page or the wireless network test report.
Make sure that the product is connected to the correct wireless network, and not another wireless network in the area (such as your neighbor's).
Follow these steps to assign a static IP address to your HP product.
In the browser on your preference please type the printer's IP address and the EWS (Emblemded Web Server) should open here Click the Networking tab, click the Wireless tab, and then click the IPv4tab. (Your menu path might be slightly different, depending on your HP product model.) A new settings page displays there do the following;
Set a Manual IP : Your wireless router automatically sets an IP address within a specific range (called the DHCP range). If you know what the DHCP range is, set an IP address in which the last set of numbers is outside that range, but no higher than 254. Keep the first three sets of numbers the same. If you do not know the DHCP range, select a fairly high IP address, like 250 (again, for the last set of numbers). To learn about your router's DHCP range, contact your Internet Service Provider (ISP) or wireless router manufacturer.
Subnet address : Use 255.255.255.0, unless you know that it is different, in which case you should use that number.
Set the gateway address and the first DNS. Find the gateway address in network configuration page you printed previously and added here and for the DNS servers. Use google's Public DNS Servers which are 8.8.8.8 and in the second (Alternative DNS) 8.8.4.4
Att this point you will be ready to take full advantage of the capabilities of EPrint just follow this instructions to get started GO HERE.
Hope this answer your question and helps you. Let me know if I can assist you any further I will do my best to help you.
Best of luck;
RobertoR
And Remember...
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Shared Server Connection Problem On Rac

Hii All
I configured dispatcher parameter in Rac environment as
"alter system set dispatchers='(address=(protocol=tcp)(host=node1-vip.domain.com))(dispatchers=10) (session=75)' scope=both sid='RAC1';
but when I run lsnrctl services I see vip ip address instead of node1-vip.domain.com so I have connection problems because Client trying to access to server via internet through Nat ip address and listener replies requests vip ip address so client can not connect the server.
I can acces to server on DEDICATED connection.
Have you idea ?
Best Regards
GI 11.2.0.2 PSU4
RDBMS 11.2.0.1
OS AIX 6.1

EB wrote:
I did exactly what document says.Parameters are
on NODE1
dispatchers (address=(protocol=tcp)(host=node1-vip.domain.com))(dispatchers=10) (session=75)
local_listener (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1-vip.domain.com)(PORT=1521)))
on NODE2
dispatchers (address=(protocol=tcp)(host=node2-vip.domain.com))(dispatchers=10) (session=75)
local_listener (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node2-vip.domain.com)(PORT=1521)))
In document lsnrctl ouput shows host=node-vip But I cant see nor node1-vip.domain.com neither node2.domain.com just see node vip address That does not really matter - as the hostname is an alias for an IP address and as long as the hostname resolves to the correct IP address.
The issue (as I mentioned above) is that the external client needs to resolve these names to the NAT addresses. So what happens if you ping node1-vip.domain.com and node1-vip from the client? What happens when you telnet on the client to port 1521 and hosts node1-vip.domain.com or node1-vip ?
If this works and the client's Oracle connection does not, enable SQL*Net tracing on the client and look in the trace file for failed calls.
Also keep in mind that you would (by default) only have port 1521 NAT'ed. So should the client be redirected for a connection using a different port, it is unlikely that this port is NAT'ed - unless you're basically blindly NAT'ing all ports which would be unusual and risky.

Mavericks Mail IMAP Server Connection Problem

Similar Messages

Maybe you are looking for