Mavericks on mid 2010 MAC Pro really slow. Can I do anything to speed it up?

Mavericks OS X 10.9.2 on mid 2010 MAC Pro really slow. Can I do anything to speed it up?

do a clean install and re-install needed apps, lots of posts where in place upgrades are slow for unknown reasons

Similar Messages

I can't get 5.1 Surround Sound running Windows 7, Mid-2010 Mac Pro

Hello,
So I'm running bootcamp on my Mid-2010 Mac Pro and I can't get Dolby Surround Sound to run from the Realtek HD Audio Manager. Is there a way to produce true Dolby 5.1? I understand this may be more bootcamp related than to the actual hardware itself but I figured this is the best place to start troubleshooting this.
Thanks

I can try-dunno how much help I'll be, though
go here for Realtek drivers for surround sound
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
if realtek has a sound manager, try clicking on that, and a config dialog might appear
sorry can't be much more help than that
JB

Mid 2010 Mac Pro 10.6.4 Does Not Log In

This is both a MacPro question and an Avid ProTools question...first I need to get the Mac working again and then come up with a longer term ProTool solution....
I am at a new job where I am currently running ProTools 8 using a Digidesign 003 on a Mid 2010 Mac Pro running OS 10.6.4. There are two user accounts, and only one (the adminsitrator account) is marginally functional. It runs extremely slowly (five minutes to launch GarageBand) and the application icons in the dock do not display correctly. When attempting to log into the other account, after a few minutes a blue screen comes up and then it returns back to the log in screen.
I know that the computer would be compatabile with Mavericks OS 10.9, but I know that 10.9 is not reccomended for any Avid Product (even newer versions of ProTools).
How can I make the computer operational while still running OS 10.6? Do I need to upgrade to a newer OS and take on the expense of upgrading to a newer version of ProTools? What about compatability with the 003?

it shipped with an OEM DVD of special build of 10.6.4 but you really need 10.6.8+ at least, or 10.8.5. Depends on if your apps still rely on older PowerPC and Rosetta.
Software Update would have to be turned off it you are not already on 10.6.8 plus all the security updates and new Safari update and others.
I like to have a safety net, clone your system, take the clone off line, then make updates and changes. And have two such backup working clone systems handy. In some cases you can just partition one drive to do that.
Sounds like other issues. Invest in a 250GB or 500GB SSD for t he system. PCIe SSD card and SSD(s) for scratch and media libraries.
Make sure it has 24-48GB RAM.
ATI 5770 drivers really need 10.6.8.

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

10.7.3 USB Lockup on mid-2010 Mac Pro

Hello,
I updated my mid-2010 Mac Pro to update 10.7.3 this morning. Since then, I have had three occasions today, each one worse than the previous, where all USB devices connected just locked up completely and were totally unresponsive.
This includes my keyboard, mouse, and video camera. Those are the only devices that are connected to this computer.
One at a time I have tried disconnecting and reconnecting each device with no success. Interestingly on a couple of occasions, my keyboard would stop working but the mouse daisy chained out of the keyboard worked without any issues.
The most recent incident absolutely everything locked up and the only option I had was to do a hard reset of the computer. When I logged back in I quickly enabled the Bluetooth support and grabbed my wireless keyboard and mouse so that I can work.
Has anyone else encountered this yet? I know there aren't that many Mac Pro users any more.
In the meantime, Time Machine is performing a full backup and I think I will downgrade back to 10.7.2.
I wish I could go back to 10.6.8 but since this Mac Pro shipped with 10.7.2, it will not accept an earlier version of OS X. :-(

Wow, Same issue here on my Early 2008 Mac Pro. After 10.7.3 update, my USB ports have been behaving erratically. The problem actually seems to be getting progressively worse too.
From what Ive gathered so fat, it seems almost as if the ports are now underpowered. Plugging a keyboard directly into the USB port seems to work indefinitely. As soon as I add other devices to same port, the new device won't work.
My first assumption was that my USB hub was shot, but then I tried the ports on the back of my Cinema Display and they were all jacked up too.
I tried plugging another keyboard directly into the front USB port but That didn't work either, as it seems there was no power for it due to the other devices plugged into the back. I unplugged everything but the front keyboard and it still didn't work until I restarted it.
Extremely hard to troubleshoot how this issue is behaving. Like I said, erratic is probably best description.
This is the worst bug I've personally experienced after an update to an OS since I've been using Macs on System 7.
I really hope Apple fixes this ASAP.

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

Mid 2010 Mac Pro boot camp recognizing 1.86GB RAM

I have a mid 2010 Mac Pro w/ 6GB RAM and a dedicated video card. Win7 32-bit is boot camped on it. I know 32-bit Windows can only use 3.75GB of RAM. However, this Mac Pro is only seeing 1.86GB.
Since this is Win7, no boot.ini is available for /3GB switch and editbcd /set increaseuserva 3072 did nothing, even after clearing out the variable and resetting it to 3072.
I came across a post saying UEFI/BIOS for Mac Pros cannot see more than 1.86GB RAM in a Windows 32-bit environment. Is this true? It was only the one post and I forgot where I saw it. If not, how do I resolve this issue? If not, that's fine. I can format and install Win7 64-bit if needed. I want to confirm 64-bit Win7 will recognize more than 1.86GB of RAM. Any input?
Thank you.

64 bit Windows will see and use all your ram.

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro?

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro? I've read that you could go as high as 3GB with no problems although not supported. With the prices of HDD's dropping, I'd like to add more storage to my system, either internally of externally, but I'd like to get a couple of 4GB drives, and was wondering if anyone has used that combination with a Mid 2010 Mac Pro 8 core.

Drives as large as 16TB are directly supported in Mac OS X and behave well when formatted with GUID partition Table -- the default after 10.4.4.
There is a Bug in the Erase function in Disk Utility from 10.8.4, that is unresolved at this writing. Drives over 2.2TB, once erased with this software as an Internal Drive, the drive cannot be further partitioned or erased by that same software. A fix in 10.9.3 or later is anticipated, but not guaranteed. Older versions work fine. External enclosures with Large Drive support work fine.
Western Digital in particular (and others may soon follow) has also shortened the depth of the mounting holes on certain large drives -- the holes adjacent to the platters -- to allow for the addition of an extra platter on certain large drives. A washer may be required to reduce the effective length the drive mounting screw penetrates into the drive.

Best Video card for Mid 2010 Mac Pro

I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
Looking for suggestions, and links if possible to what you know works.
Thanks!

Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

Mid 2010 Mac Pro - Thunderbolt External Hard Drive

For Christmas my family gave me a 2T Little Big Disk thunderbolt external drive. I have a mid 2010 Mac Pro which doesn't have a thunderbolt port. Is there a PCI card I can use to connect the drive to my Mac Pro?

Those "adapters" are standard HBA. Like ATTO and others.
eSATA/USB
CalDigit FASTA-6GU3 2 port USB 3.0 & 2 Port eSATA 6Gb/s host adapter
PCIe Bus Extender
Sonnet Express Bus Extender PCIe 2.0
SAS/SATA
ATTO ExpressSAS H680 Adapter
ATTO ExpressSAS H6F0 Adapter
ATTO ExpressSAS H644 Adapter
ATTO ExpressSAS R680 RAID Adapter(2)
Firmtek Seritek/e6G 2 Port eSATA PCI Express (PCIe) Serial ATA Adapter
Newer Technology MAXPower eSATA 6G PCIe 2.0 Controller Card
Newer Technology MAXPower RAID mini-SAS 6G-1e1i Controller Card(3)
Newer Technology MAXPower RAID mini-SAS 6G-2e Controller Card(3)
Sonnet Tempo SATA 6Gb Pro 2-port
Sonnet Tempo SATA 6Gb Pro 4-port
Sonnet 6Gb/s SAS/SATA RAID Controller(2)

Wake up problems - mid 2010 Mac Pro - dual hex core OS X

Mid- 2010 Mac Pro desktop (dual hexcore) running Mountain Lion OS X version 10.7.5 will often refuse to awaken properly after being left alone for a few hours.
Will not respond to wireless mouse or wireless keyboard and sometimes not to USB mouse or keyboard ... requiring a "hold in the power button until it powers off, then push power button to restart."
Also, often notice fan on (can hear it) when computer has been "asleep" and shouldn't be requiring much fanning (to my way of thinking.
Nice machine - MacBeast, I call it - but with these persistent, though sporadic issues.

That 10.7.x is Lion, not 10.8.2 ML but that is minor probably.
What about strip your beast down to bare tacs hardware adn clean system and resetting SMC?
I would not be surprised BT wireless problem as well.

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

Ideal set up of mid 2010 mac pro

Hi - I've somehow been left in charge of a shared 2010 mac pro we have in the office. We use it for graphic design work and the odd bit of video editing. At the moment users are complaining that the machine is slow, I suspect its because they have all got used to SSD's in newer macs. My question is what set up should I go for if I rebuild this machine? Here are the specs:
Mac Pro Mid 2010
2 x 2.4 ghz quad-core
24 gb ram
Raid card
3 x 1tb hdd
1 x 2tb hdd
What I really would like is some advice as to how/which combination of drives and raid should we use in the rebuild?
Currently the machine is set up as follows:
2tb hdd running osx
3x1tb setup using RAID 5 as a scratch disk.
We don't need the scratch disk any more as most of the software we are using seems to have eschewed using scratch disks (FCP, Premier etc). I was thinking of setting it up using RAID 10 because that would then improve the os speed and provide data redundancy. However I recognise that I am a bit of an amateur at this, so please chip in with thoughts! I don't think we can get an SSD.
Thank you in advance!

Redundant. Multiple backup sets. Clone the system for sure. All that is needed is carve out 200GB partition on either or both of your WD Black drives, even the Green one.
That lets you always clone and have current copy, an older copy if needed, and so you can repair and restore the SSD.
And $10? for TRIM Enabler 3.x that you need for your SSD.
Before clone system, install TRIM Enabler
And after you clone, run Disk Utility's REPAIR DISK on the SSD -- just to be on the safest side.
http://www.macupdate.com/app/mac/37852/trim-enabler
Clone your system:
How to Clone a Volume
Using Cloning as a Backup Strategy
See also Erasing a Drive, How and Why to Partition a Drive, RAID.
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://macperformanceguide.com/Mac-HowToClone.html

Mid 2010 MacBook Pro extremely slow

Hi! I have a mid-2010 MacBook Pro,which suddenly decided to start moving at snail speed for me. Applications take 5 minutes to open and when they do, they usually crash and I have to force quit. Finder runs pretty smooth but it is also slower than it used to be.
I have:
4GB Ram
500GB capacity hardrive, 173GB available
I have booted in safe mode, done both a PRAM and SMC reset, is there anything else I can try before I spend a ton of money getting it fixed?
Thanks in advance, and sorry for any typos, I am on mobile.

Assume the boot drive is dying and have a extra copy of your user files on another regular external drive in addition to any TimeMachine or bootable clone you may have.
Most commonly used backup methods
Next run through these two user tips
Why is my computer slow?
..Step by Step to fix your Mac
If you want us to help you further and possibly pinpoint the cause please provide as much information in this next user tip back on this thread.
Help us to help you on these forums
For instance we have no idea what operating system version your using.
What do you mean by snail speed? Do you see spinning beach balls or is there a runaway process, is the machine hot?
Slow booting, loading programs or slow writing to the drive? Slow online only?
Thanks.

Mavericks on mid 2010 MAC Pro really slow. Can I do anything to speed it up?

Similar Messages

Maybe you are looking for