Mavericks seems to break Scanner compatibility.

I can't use my high speed Canon DR2010c scanner after upgrading to Mavericks. It's not being recognized by Image Capture and there are no Canon-supplied TWAIN drivers since (according to Canon) Apple supplies the drivers. The scanner shows up in System Profiler.
According to other posters, Epson scanners are having the same issue.
Help is appreciated.

How do you edit your own post, BTW?
Withing 15 minutes there should be and Edit link next to the Like and Reply link.
If you fail to find a fix give ViewScan a try. You can check at its website to see if your scanner is supported. I would be surprised if it wasn't.
OT

Similar Messages

Upgrade to Adobe 9 pro breaks scanner compatibility

I have been using Adobe 7 Standard and Adobe 8 Standard to create PDF documents from my flatbed scanner (Microtek ScanMaker S400).
This had been working fine until I upgraded to Adobe 9 Professinal about 2 months ago.
Now, when I try to create a PDF from the scanner most of the options are grayed out (Black and White Document, grayscale document, color document, color image). There are two options available: Custom Scan and Presets. The Custom Scan opens another dialog box with some options. When I choose "scan" I get an error saying:
"Error while interacting with the scanner: the selected scanner was not found."
The scanner continues to work normally with other programs on my computer including Adobe Photoshop.
I am running Windows XP SP3 with 3GB of RAM. No recent hardware changes have been made.
I've reinstalled the scanner drivers and have the most uptodate version.

Try re-installing the scanner driver and/or finding the most recent drivers to install.

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Daniel Craigie-
How full is the hard drive that you are trying to save to? Not that it should matter, but have you tried scanning another document?
Is the scanner plugged directly into the Mac? Try it that way.
Disconnect all peripherals except keyboard, monitor, mouse and scanner and see if the problem goes away.
Luck-
-DaddyPaycheck

Upgrading to Mavericks seems to have lost my windows 7 dual boot up capability. How can I get it back?

After having installed with Bootcamp windows 7 a couple years ago, upgrading to mavericks seems to have lost that capability despite windows being installed in its own partition. How can I get this back?

This was the scenario:
The first time I updated, it was only my music that was lost.
When I got my music back, I lost my apps.
When I got my apps back, my contacts, notes and photos were lost.
Now I got back everything except for my photos.
(Yes, I restored from backup several times since the first update.)
Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
Thank you.

Cant seem to break up a 1hr movie into 10min segs.

i want to upload a 1hr movie to youtube. i cant seem to break up the movie into smaller segments for upload. ive tried chapters markers, cut and paste, chop(whatever). during this ordeal i have used up tons of disk space on files i cant find (but forget about that just help me break up this movie.
thanks
tencups

welcome tencupsdavid to the  iMovie boards..
obviously, you totally miss the basic functions of this edit app, e.g. chapter markers have for sure absolutely no effect on the length of a projectc nor on an export..
please use the Help feature of iMovie how to import, drag clips into timeline, how to edit those clips and how to export just selected clips o a project's timeline...
aside: this board is about version 5 of iMovie (HD= vers.5, iMovie6= vers. 6, iM08= version 7)... if you need addtional help, check which version is in use.. (=different versions/diff. help, advices...)

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

Posted this before I realised there is an update for the iPhoto app 9.1.3 which sorts the problem.

Package seems to break when distributed with SCCM 2012

Hello.
I made a package with an old Java version and a link to the locally installed IE, that opens a special webpage.
When i install this manually with the
AppV_DeployNPublish tool on my testmachine (that is a copy of a domain computer), the package works. It opens the webpage and uses the Java in the package (checked with ProcessExplorer). I can even upgrade the java or delete it and it works.
But when we deploy it with the SCCM 2012 to a domain computer, tha package seems to break. It opens the webpage but uses the local installed Java (checked again with ProcessExplorer), that ends with the software doesn't work. We must use an old java version
to get the software to function properly!
We are using the App-V 4.6.2 version...
Why is it like this?
Regards,
Peter

To properly isolate Java you need to make sure the AppData\LocalLow\Sun folder is part of your App-V package. Also adding the -noframemerging switch to the IE command line can help as sometimes it likes to latch onto the IE process already running outside
the bubble rather than starting a new one.
Lots more info here:
http://packageology.com/2014/02/sequencing-java-the-definitive-guide-part-1
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Xorg update seems to break ATI Catalyst

Hi all
Just a quick note for users of the proprietary ATI Catalyst driver, the latest Xorg update seems to break it (at least on my system).
Boot sequence proceeds as normal until GDM loads, then the screen oscillates slowly between black and white.
Any suggested fix?

Hi there
Did Pacman upgrade your kernel alongside Xorg?. Maybe you need to rebuild the fglrx module.
Best of Luck

Maverick has destroyed my scanner on MP160 canon,how can it be rectified

I have only recently discovered that my scanner will not function on my Canon mp160 . This prints fine but will not scan.
Maverick Os 10.9.1 has somehow destroyed the driver . I reset the printer and the scanner facility disappeared altogether!
Is there a software fix for this on the way , or in existence ? I have tried Canon's Easy Photo as recommended after a chat with apple support but this only offers format printing solutions.
What are the options here ? Is the MP160 un supported or now redundant?
Is this a pitfall of upgrading to Maverick?
Live in hope , Jeff293

I tried this, but under Mavericks MP Navigator 3.0 crashes every time on opening so the "Proceed with the scan and smile." part is very difficult.
Tried to download a MP Navigator 4 version, but it seems incompatible with the MP160.
A;so tried the website suggested above
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware
but it seems to say there is no Mavericks driver for the MP160.
Does anyone know if there is a more recent version of MP navigator thet does work with a) Mavericks b) the MP160
Thanks
Srtephen

Mavericks seems to have broken all my adobe programs, can I instal the previous version of osx?

I recently instaled mavericks and the new premier upgrade, there seems to be a permisions issue going on, all of my adobe programs seem broken, the import/ export does not work, dont know what to do, is there anyway that I can re instal snow leoopard? I am loosing money every day I cant edit video.
please help

What versions?
Allan

Mac OSX 10.9 (Mavericks) and D110 PhotoSmart Scanner not working together

My HP Scanning Software for my D110 PhotoSmart printer stopped working with the upgrade on my IMac from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Help! I don't want to have to use something like VueScan and abandon HP. I really need to be able to save scanned documents to disk, and right now my scanner won't let me save scanned pages.

Hello all,
I see that you are having issues scanning in MAC OX 10.9. The problem is that there are no drivers available for the D110 for Mavericks at the moment. The first link below will bring you to another page in the forums that will show you an alternate way of scanning.
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Problems-scanning-with-HP-printer-and-Maver...
This second link will take you to the download page for your printer. Keep checking back there to see if there are drivers available. There are still newer printers then yours that don't have drivers, so you will have to be patient.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=4023246&
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Epson 836XL Scanner compatibility - HELP!

My wife's Mirrored Door G4 died on her a few months back and I got her a MacMini. It works great, but had no room for the SCSI card used to drive/connect her oversized Epson 836XL scanner. I tried to find a Mac SCSI to Firewire or SCSI to USB adaptor but none of them had 1) the proper pin configuration and 2) were supposedly only PC compatible.
I pulled the SCSI card out of her old computer and put it in mine. The computer recognizes it in PCI slot 5 as a SCSI Bus Controller so I'm pretty sure it is still working, even though her old computer motherboard was fried. Anyway, I hooked the scanner to my G4, installed the drivers and tried to use it but it the computer just doesn't seem to be seeing it. I know the scanner drivers were supposedly only good up through OSX 10.2.X but I would hope that it would still be usable under 10.3.9.
I even tried using the optional parallel port connector on the back of the scanner and hooking it up with a parallel to USB cable to my Mac but that didn't work either.
I'm about at my wits end. It worked fine on her G4 under 10.2.9. I would hope that it would work on my older computer even though my OS is a later version. It just doesn't seem to be able to be recognized by my computer. A new oversized scanner runs in the $1500 range and that is a bit more than we can spend.
Anyone have any ideas?
Here is the SCSI card info, if it can be useful:
Type: SCSI Bus Controller
Bus: PCI
Slot: SLOT-5
Vendor ID: 0x9004
Device ID: 0x5078
Subsystem Vendor ID: 0x9004
Subsystem ID: 0x7850
Revision ID: 0x0003
Do I need a SCSI driver for the card maybe? Thanks.
Graphite G4 733MHz Mac OS X (10.3.9)

Thanks Dave. You know what? I downloaded the trial version and believe it or not it worked! I didn't expect it to as I thought there was a connection issue, but the SCSI interface seems to work with VueScan. I was hoping I'd be able to get it to work with the Photoshop plug-in but I guess that is not to be.
Thanks so much for turning me on to this, you don't know how much time and $$$ you've saved me. It anyone knows if there any current drivers that will get it to work with Photoshop under 10.3.9 or higher, that would be great too.
--Kort
Hi,
You might try installing the trial version of
Vuescan. It says it supports your model scanner.
http://www.hamrick.com/
Regards,
Dave

Language packs seem to break spell-check language selection

I suspect this is a bug, but maybe I am doing something wrong, so I'll ask here before submitting a bug report.
I have Thunderbird 31.2.0 installed on OS X Mavericks. I am pretty sure it is the en-GB version, but I have several language packs installed, including the (presumably redundant) en-GB pack. I also have installed (and sometimes uninstalled) the add-ons "Quick Locale Switcher" and "Simple Locale Switcher" at various times to switch the user interface language. (The reason I have included the two is, I had the "Quick" switcher first, and suspected what I was seeing might be a bug in the add-on, so I switched to the other.)
Now, the symptom. When the user interface language is set as en-GB, the spell-checker language choice in the "Preferences" menu (I guess "Options" in Windows, and I don't know what in Linux) is respected - I can type an email in one language, stop, switch the spell-checker language half way through, and the real-time spell-checking is then by the new language exactly as I would have expected. But, when the user interface language is anything other than en-GB (I haven't tried en-US, but I have tried German and Russian), the spell-check language follows the user interface language, and changing the spell-check language option in the "Preferences" menu has no effect whatsoever on anything.
This problem persisted even after I removed the two language-switching add-ons. Then, I removed all the language packs (which forced my user interface back into en-GB), and magically the spell-check language selection started working again.
So I am thinking the problem is driven by the user interface being from a language pack. When the user interface language matches the original install language, the spell-check language selection works; when the user interface language is something else, the spell-check language selection is ignored, and the actual spell-check language follows the user interface language.
The "Simple Locale Switcher" does not seem to allow the user interface language and the spell-check language to be switched independently, but "Quick Locale Switcher" does. However, this feature doesn't seem to work, nor does switching the spell-check language through the Thunderbird Preferences rather than the add-on (unless the user interface language is the default en-GB).
Has any one else seen a problem like this? Is there a way to fix it? (Maybe futz with the language settings on the other side of the "Here Be Dragons" warning?)

Before chasing dragons, right click in the body of a mail in the compose window and set the spell check language there. I have no idea if it will work, but it might add to the over all body of knowledge for a bug report.
Please post a link to any bug report you make.

Mavericks seems to break Scanner compatibility.

Similar Messages

Maybe you are looking for