Mavericks slow when typing non-English

Days ago I wrote that Mavericks is very slow when typing fast. And it still is slow. Untill you use other than English language keyboard (I haven't check German or French or other). I use keyboard with "ded key". And in this case everything goes wrong - suddenly in Pages cursor dissapear or it isn't possible to type at all for some seconds. Safari typically have delay after 2 characters modified by ded key, like "āšč" etc.Mess.
I check this in upgrade version and later in to clear install. No chance.
Now I'm back on Mountain Lion.

peter_ap_ap wrote:
I use keyboard with "ded key". And in this case everything goes wrong -
Why not tell us which one, so we don't have to guess. If it's Latvian, this is a known bug
https://discussions.apple.com/message/23920369#23920369
which you should report to Apple via
http://www.apple.com/feedback
If it's not Latvian, you have discovered something new and we want to test it to make sure it not something which only affects your system.

Similar Messages

Accents appearing on an "e" and an "a" when typing in English

I have noticed that when typing in English on my Q10, I occasionally get an acute accent on the "e" of "the" or other words with an "e" at the end. Also occasionally a grave accent on an "a" when the letter "a" appears in isolation as in "a person".
My language is set to automatic, and the two languages I have entered for automatic spelling correction are English and French.
Does anyone have any idea why this should be happening?
PJCMoray

PJCMoray wrote:
I have noticed that when typing in English on my Q10, I occasionally get an acute accent on the "e" of "the" or other words with an "e" at the end. Also occasionally a grave accent on an "a" when the letter "a" appears in isolation as in "a person".
My language is set to automatic, and the two languages I have entered for automatic spelling correction are English and French.
Does anyone have any idea why this should be happening?
I'm set up the very same way on my Z10, and am having the same situation when best prediction suggests e's and a's in words such as "the" and "that" which don't even exist in the French language...needs to be corrected.

Keypad is slow when typing after update?

why is it that after updating my phone to ios7 my keypad is incredibly slow when recognising touch and showing the typed words?
I was wondering if anyone else has had the same problem after updating their phone/ipod too and if there is any way to fix it.
its incredibly frustrating as I have to wait around 10 seconds before a sentence is typed up fully (its completely unresponsive then suddenly the whole thing appears) and if I need to add a number, comma, questionmark, etc it can take forever before I am able to do so. None of my friends who have updated have had the same problem but then they all have the iphone 5 (I have the iphone4)
any advise is extremely appriciated, thanks very much!

Although it has not happened to me, there are two solutions that seem to work to other people
1.- Go to Settings > General > Reset > Reset All Settings
2.- Go to Settings > iCloud > turn off Documents and Data
Hope that helps

Firefox UI is slow when typing or selecting text (after 33.0 update)

After the 33.0 update, I noticed that typing or backspacing in any field on a webpage or even in the Firefox address bar is slow to echo, about a 1 second lag. Also, selecting typed text (to delete it, etc.) by a quick click-drag doesn't select the whole area, yet when I click in the dialog to deselect, the portion that wasn't showing as selected at first, becomes selected for a moment before the whole string selection hilite disappears.
This makes the browser very cumbersome to use.
This appears to be new to 33.0. I tried resetting Firefox, but that didn't fix the problem. No issue in IE 11.0, so I don't think its malware. I also keep all s/w up-to-date, and run avast/zonealarm for security. I've never had a malware infection on this machine. Win7 Home Premium 64-bit, 8GB RAM. Resource utilization is low, so no out-of-control processes.
I did apply the latest Microsoft "Patch Tuesday" updates on 10/15, the same day that I updated Firefox. This may complicate the diagnosis. But again, IE wasn't affected, so how is the Firefox UI different for basic keyboard/display I/O?
If there's an easy way to "downgrade" to the prior 32.0.3 revision, I could try that to confirm. Please help!

Safe mode fixed it, so I then tested disabling all add-ons and plug-ins--no joy. I then disabled hardware acceleration, which fixed it. Re-enabled all add-ons and plug-ins, and still works, so it was the hardware acceleration.
For reference, my system is a Dell desktop with an ATI Radeon HD5670 graphics card, and Dell's latest official driver is the one that shipped with the system in 2010. ATI (AMD) has their latest generic driver for the HD5xxx series dated Sep 2014. Thanks, Dell :-( So, can't really do much about that--glad I'm not a gamer.
Anyway, this still begs the question of what changed in the last 3 days where Firefox went from working just fine with hardware acceleration enabled, to exhibiting this problem.

Problem when passing non English text to another amx page

Hi,
I'm using JDeveloper version 11.1.2.3.0 under windows 7, to deployed ADF Mobile application into android device,
when i used the application to pass 3 input text value to another page (or object)
i note that if passed the 3 text without any English character (means just Arabic,Urdo,Farsi ...)
the next page will received only the last text and the others will be null
that means the other texts Value Change Listener dose not work, they will work just in one case if i used English
or any other special Character (Space bar, Back Space ...) in order to invoke that action
Any help plz
Note:- when i deploy it to iPhone device it is work fine
Edited by: user2397713 on Jun 5, 2013 3:11 PM

Hi,
do you have a test case and instructions for me to try and run. Just create a simple page-to-page use case and send it in a ZIP file (renamed to ZIP) for me to test on 11.1.2.4 and file a bug if required. If you have a support contract, you can file a service request with support. My mail addres sis in my OTN profile, just click my name link.
Frank

SMS input box is covered by candidate bar when using non-English input. Any idea?

Any idea if any get-around?
Same for other apps too...

Hi,
do you have a test case and instructions for me to try and run. Just create a simple page-to-page use case and send it in a ZIP file (renamed to ZIP) for me to test on 11.1.2.4 and file a bug if required. If you have a support contract, you can file a service request with support. My mail addres sis in my OTN profile, just click my name link.
Frank

Customized Skins in Non-English Projects

I have a customized skin that when used non-English projects,
it omits special characters in the buttons for Contents and Index.
I didn't create the skin so I don't have Flash. Any suggestions on
how to fix the buttons to display the missing characters?

If she's no longer with the company and she was using Flash,
could it by chance be a company license for Flash that you could
take over...?
Rick referred to the LNG file, which exists in both the
source files and the output files. Do the copying and pasting with
the source versions. (The output version will be overwritten from
the source version every time.)
If Rick's suggestion doesn't work, the only other thing I can
think of would be to check the .fla files themselves in Flash. The
person who tweaked the files may have done something to the dynamic
text fields for the button labels. If you can get a copy of Flash,
you could check two things on the button label text field
(double-click the Label object twice to get to this point):
1. See if "Use device fonts" is selected in a dropdown on the
left side of the Properties panel. This selection won't let you
embed fonts. If it's selected, try #2 below instead. If it isn't,
select it, export the movie, and put it in your output files.
2. Change "Use device fonts" to "Anti-alias for animation."
Click the Embed button. Select every option with Latin in it, and
click OK. Export to a movie, and put it in your output files.
Note that you'd have to do this for each button that isn't
displaying the characters properly.
Hope this helps,
Ben

Question: Autocomplete/autocorrect when typing in iPhone

Hi all,
I'm hoping someone could shed some light on the following query I have ...
When typing in English, I've seen the iPod Touch autocomplete words for you and place it in the message screen whilst you're typing. I've also seen it autocorrect words (e.g. piza --> pizza). Since English is not my 1st language, I'll have to type e-mail in a different language when I eventually get my iPhone.
Will this autocorrect/autocomplete feature wreck havoc with my e-mails or will I be able to type e-mail in a different language (using the standard english alphabet though) without my words being changed to different words because the iPhone thinks I'm mistyping words?
If this message does not make sense, just let me know and I'll change it some more to see if it helps!
Thank you,
E

Hi,
I think it's only a matter of keyboard. If you activate 2 keyboards (let's say English and French), just switch from one keyboard to another to have autocomplete/autocorrect look for words in the target language.

I have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

i have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.

Bug when getting file path in non-english Windows Vista

Hello,
I'm getting an error when trying to get the file path of a video in a non-english Windows Vista... The code is:
var file = "video.flv"
var filePath = air.File.applicationStorageDirectory.resolvePath(file);
filePath = filePath.nativePath;
The filePath variable is used later by a flash video player to load the video file..
In the brazilian Windows Vista the path of the StorageDirectory would be something like "C:\Usuários\(user name)\..." but if I run this script it returns "C:\Users\(user name)\..." as the native path.
The problem seems to be in the "nativePath" function, cause I'm able to copy files to the app-storage folder using the "air.File.appicationStorageDirectory.resolvePath()" method without any problems.
I could insert a small code which substitutes "Users" with "Usuários" but then it wouldn't work on an english Vista...
Any ideas on this? Is there a way to check the language of the operating system in Air so to act accordingly?
Thanks for any help!

Hello,
has anybody found a solution?
Testcase: SQL Developer 3.1 on a German XP with default NLS Settings
CREATE TABLE "TEST_TABLE"
       "NUM" NUMBER
      ,"VCH" VARCHAR2(10 BYTE)
    ) ;Test file test_insert.dsv
num;vch
1;KL
1,5;tz
12345,45;ooImporting using the wizard inserts the first row correctly, for the others I get
SET DEFINE OFF
--EinfÃ¼gen fÃ¼r Zeilen 1 bis 3 nicht erfolgreich
--ORA-01722: invalid number
--Zeile 2
INSERT INTO TEST_TABLE (NUM, VCH) VALUES (1.5,'tz');
--Zeile 3
INSERT INTO TEST_TABLE (NUM, VCH) VALUES (12345.45,'oo');Beside the wrong umlaut in the message the insert statement itself is correct, because you cannot use the german decimal separator "," in the script. The bug is, that it should use the same NLS settings for generating and running the script.
Regards
Marcus

When using Mavericks, how can I automatically replace 'i' with 'I' when typing?

When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
It was easy to do prior to mavericks using system preferences (language and text), but now I can only submit a 2 letter word to replace, not a 1 letter word. I have tried using a space but it doesn't allow that. I would assume that most people would love to be able to type quickly without having to make uppercase I all the time (first world problem i know), so I can't understand why apple have removed this feature.

There is the shift key, or text replacement approach, providing you have enabled two things:
Edit > Substitution > √ Text Replacement
System Preferences > Keyboard > TextClick + to add a replacement
Replaceii[spacebar]
With
I[spacebar]
Press return
Quit System Preferences
Now, when you type ii, you will see a pop-up offering I.
In the OS X App Store, search for WordService. This free collection of Services will enable you to just type your content, select it, and then choose the Service item, “Initial Caps of Sentences.” It does what it says.

How can I add the Language Toolbar to my English version of Firefox? I want to be able to switch to Japanese language for certain websites and when typing e-mails.

How can I add the Language Toolbar to my English version of Firefox? I want to be able to switch to Japanese language for certain websites and when typing e-mails.
There should be something that allows me to switch back and foth between Japanese and English...or is that in Windows XP and not in the browser?

See:
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout

Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts.

Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts. Like many who can type quite quickly but at secretarial level, the text box freezes, nothing works and you know what's coming...crash!
This is most annoying. Is there bug fixes for this. Apparently I have the current updates and this problem still exists. Is it a Maverick bug or Keynote.
Barry

How did you install Mavericks, as an update ontop of the previous OS or did you wipe the drive and install clean?

've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

I've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

After an update or installation, your MBP may take some time to index its files. Give it some time - but if you don't see any improvement, post here - you'll get an answer!

Mavericks slow when typing non-English

Similar Messages

Maybe you are looking for