Mavericks support for express 34 cards?

What is Mavericks support for express 34 cards?

yes, you can install the usb 3.0 driver using Multibeast 6.3.1
when you are in the application,
go to the Drivers tab, click Misc
tick the USB 3.0 Universal
then go to the Build tab, click install!

Similar Messages

10.10.3 breaks support for ATI video cards

The 10.10.3 update has broken support for a bunch of ATI video cards that worked just fine under 10.10.2. This is for my Mac Pro 5,1. Some folks also reported issues with breaking support for Nvidia cards, but have mentioned that the latest Nvidia beta drivers might work.
There is a thread that may be found here that has some details:
OS X 10.10.3 Update
and here (reverting back to 10.10.2 fixes things):
http://forums.macrumors.com/showthread.php?t=1864352
Specifically, my Visiontek Eyefinity 6 7750 stopped working, and another users Radeon 7770 stopped working. Yet, the 7970 continues to work. Reverting to the old ATI 5770 that came with the machine renders it usable. This is a problem as the 7750 only took a single slot, and the two 5770s eat up 3 slots so I can't use my USB 3 card, etc.
I remember this once happened before. I think it was with the 10.9.2 update which borked a bunch of video cards that worked fine under 10.9.1, and then were again made to work just fine with the 10.9.3 update.
All the 'standard' fixes have been attempted. Clean installs. Fix permissions. Etc.
Not sure why apple would seemingly disable support for these cards, other than by accident, I assume, much like happened with the 10.9.2 update.
Also not sure if just copying the correct driver from 10.10.2 might solve the problem until Apple get's around to fixing the issue. Has anyone tried? Any suggestions would be appreciated. Thanks!

Hi, i am using dual Cinema Display 30 and 23 with a HIS ATI 7750 1 GB on a Mac Pro 3.1. Post upgrade from 10.10.2 to 10.10.3 my display eded unusable blurry. Therefore I have tried to replace the 10.10.3 kext with the previous 10.10.2. But it did not work out as expected. I managed to get some video output but no acceleration at all. Therefore the system is unusable. Therefore i full downgraded to 10.10.2 now.
Never the less it might be a good starting point for someone to get acceleration running. This is what I did:
I have to set the nvram variable kext-dev-mode=1, but be warned this will allow any unsigned > .kext to load, including rootlets, malware, etc.
I did this in order to allow me to modify the kext if necessary and to ensure that if 10.10.2 kext might be locked that they still be loaded and the computer will not be prevented from boot.
sudo nvram boot-args="kext-dev-mode=1"
sudo shutdown -r now
Post this i copied from my other Mac running 10.10.2 the file /System/Library/Extensions/AMDRadeonX4000.kext to my Mac Pro 3.1 running 10.10.3 with no proper video output. Basically i copied all ATI related kext from one mac to the other.
copied [MAC10.10.2]/System/Library/Extensions/ATI* ----> [MAC10.10.3]/System/Library/Extensions/ATI*
copied [MAC10.10.2]/System/Library/Extensions/AMD* ----> [MAC10.10.3]/System/Library/Extensions/AMD*
someone needs to do a diff here to identify the file with is necessary the only one i found with a significant change seems to be AMDRadeonX4000.kext
I forced to rebuild kext cache manually
sudo touch /System/Library/Extensions
sudo kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions
And reboot!
sudo shutdown -r now
After the reboot I had display output but no acceleration at all. Seeing the video out put made me happy but the system is unusable to to the lack of acceleration of the display. I am really looking forward for Apple to fix the update and to reapply support for the ATI GPUs hence it allows to save environmental resources to keep good products like the Mac Pro 3.1 running...

Mavericks support for ARD - when will this occur?

WHen being launched, ARD says it is incompatible with Mavericks - will this be fixed, and when?

None of us here know or can say when ARD will be updated for support for Mavericks. I would expect that Apple will have an update available at or shortly after the time Mavericks is released if not before, but we'll have to wait for Apple to make further announcements.
Regards.

A55M-P33 and support for non-graphics cards in PCI-e x16 slot.

Does this motherboard support using an LSI raid card in the x16 slot, or does it only support graphics cards? I am building an Unraid box and would like to use the slot for an x4 or x8 raid adapter in IT mode.
Thanks Matt

Well wait around and see if anyone else post's but if you do a quick search of pcie raid controller you will find varying results. All the results I found were with Intel boards though so all I can say is no guarantees.
This is Msi's official response for raid cards:
Quote
PCI-Ex4 RAID cards are designed and tested to work with Server/Workstation mainboards. Therefore MSI does not test server/workstation products with our desktop mainboards.
Please contact the PCI-Ex4 RAID card supplier for compatibility.
You can try to contact msi, but I assume they will tell you this.
>>How to contact MSI.<<
I have also heard some no so hot things about LSI service, I can however vouch for Adaptec's service, so you might want to contact both and see if they have tested and combinations.

Mavericks support for Nikon AW1 NEF

Any timescale for when Mavericks can support Nikon AW1 NEF files? So far no preview is available in Mavericks for the NEFs, I have to use Adobe bridge to view them
Kind regards,

Yes, this is really interesting since all the Nikon 1:s of this generation are exactly the same inside. What is really the problem? Is Nikon the probelm?
I switched to Lightroom now, so I can use the raw format from my AW1, but my wife still uses iPhoto so she is very frustrated. I don't see why the compatibility issue shouldn't be solved the same day a camera hits the stores.
If there isn't a problem in the communication between Canon/Nikon etc. and Apple.
Anyway, the biggest looser is Apple and their iPhoto/Aperture apps and that's too bad.

Support for WIFI microSD cards

Sorry if this was already asked and answered, but I was wondering if the Blackberry OS supported these new WIFI microSD cards which can be used to add WIFI access to devices that were originally not WIFI enabled.
Thanks,
Andrew

Got a link to the ones which you refer?
I know there was one accounced about six months ago which I read would work in the BlackBerry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mavericks support for Retina iMac 5k?

Hi guys, it is possible to downgrade the new Retina iMac to Mavericks? Supports Mavericks iMac retina? Thanks!

sunlifestyle wrote:
Hi guys, it is possible to downgrade the new Retina iMac to Mavericks? Supports Mavericks iMac retina? Thanks!
No. This question comes up every time new hardware is release, the version of OS X that originally shipped on the machine is the earliest version of OS X that can be installed. The reason being is the hardware is optimized for the version of OS X. There are rare exceptions to this rule however the iMac Retina would not be one of those exceptions.

Got 970A-G46 No support for 4 Video cards?

Hello, Got this board under the impression I would be able to run 4x individual video cards under a Linux install for work related projects, thus each card is on its own processing data. Right now I have 3 video cards working, but once I introduce the 4th video card, the motherboard starts to not work correctly as in sometimes 1 video card works, and none of them are detected, I do a reboot then a different card is seen and that's it.
I have verified I have enough power from my PSU
I'm using x1-x16 power risers so each card is hooked up for power to reduce the strain on the motherboard itself.
I have verified that each card is non DOA, each riser is correctly working and tested.
I'm trying to figure this out so I don't gotta swap to another board which will allow me to run 4x Video cards for my work related projects at my job. Thanks.
Latest Video drivers, latest BIOS, RAM working correctly, nothing is overheating. each PCI-e slot is alive.

Quote from: flobelix on 01-May-14, 23:14:16
It is not possible to run the board with four vgas. NO 970 board is meant for that tasks. Abnormal usage for mining is not officially supported and a matter of your luck and your research to find products working with odd configs. This board features two physical X16 slots and these are obviously the only slots to support vgas. There is no X1 vga. Risers aren't supported. The maximum possible with 970A-G46 is using two vgas in the x16 slots (x8/x8 config). That means besides using two vgas for multimonitor/physx setups also SLI and Crossfire (each two-way) are possible.
Well I was using it for non-mining projects, running ocl-Hashcat. Not sure why everyone assumes its for mining coins.

Support for multiple Cuda cards?

Just wondering. if I have more than one supported GTX 4XX cards in my box, does the acceleration benefit from both GPUs? or is it one or the other?

With After Effects, as long as they use the same driver, they should work together to improve your rendering.

Mavericks support for gmail within mail

I cannot sent from within iMail on my MacBook Pro (13in Oct 2011) running 10.9.4. I note this is a discussed problem any solutions?

Hello, Jim.
Thank you for visiting Apple Support Communities.
Here is an article that will walk you through some troubleshooting steps that may help with this issue.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jason H.

Mavericks support for Adobe Photoshop CS

Will installing mavericks require an upgraded version of Photoshop CS to a newer version? It is currently running on OS 10.6.8

Adobe Photoshop CS and CS2 will need to be upgraded to at least CS3.
(109509)

Arch 0.7.1 Install CD no support for my Network Card?!

Hi there,
I tried to install Arch with latest CD 0.7.1. I choose FTP Install, and wait for the DHCP Setup to complete, but it alway fails with a message like "DHCPCD could'nt start..." , so i tried installing from CD, everything went fine, rebooted, but as i guesses ii had no internet connection (or lan, im connected to a router,btw).
So my question to you is, what i have to do to make this work here?
Dont wanna miss Arch! :>>

detto wrote:
"lspci | grep net" says the following:
"Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller"
mh,...atm i cant test this, but would the command be "modprobe natsemi"?
and where to enter this?! :>>
edit: i edited the rc.conf at installation and did type eth0=dhcp thingy in there. always did so with 0.7 base installation cd, :>>
regards,
detto
Check if you have used
eth0="dhcp"
NOTE THE DOUBLE QUOTES

HT201209 Hello, I need to talk to support for my iTunes card I purchased

Hello, I put a iTunes card around the middle of jan. In my iPad, I checked today I have .40 left from a $20. Card that I have not used as yet, I would like to know where this money has gone?

Welcome to the Apple Community.
You can check where your credit has gone by looking in your purchase history.

[rs480M2-IL] MSI, Please Include Surround view support for NON ATI cards

As stated in the topic, don't see why it cannot be done, besides an ATI marketting tool to increase sales of their own cards.
the on board gfx and additional PCI-E card should be operating independently of each other, why restrict us to using ATI cards ?
thank you .

As stated in the Forum Rules we are not MSI. We are users helping users. All requests like that need to be directed towards MSI in the email listed in the link I gave you.
Have Fun
Jeremy

Enhanced PoE support for existing line cards

I have a situation where I'd like to run aironet 1252's with dual radios that require 18.x W per port. I understand that Enhanced PoE will support up to 20 and am at the software rev on my 6500 that supports it. However still no go. any ideas

Scott,
Did a type-o there. :P
I meant to say that I have 1250's connected to a PoE switch but it's NON-ePoE (15.4 watts). I have both radios enabled and associated to WLC running 5.2 firmware.
By chance, I loaded the LWAP image of "c1250-rcvk9w8-tar.124-13d.JA.tar" and I noticed during the bootup the AP's were reporting something like "RM1 upgrading firmware".
Anyway, the 1250 associated to the WLC running 5.2.178 and presto! both radios are working but on a lower transmission power.
PS: I've already been told by the Cisco SE that due to a significant number of complaints from 1250 who didn't realize the power requirements, Cisco made some changes with their LWAP codes.

Mavericks support for express 34 cards?

Similar Messages

Maybe you are looking for