Mavericks Time Machine volume disconnects without eject on sleep

Since upgrading, it has now happened three times that I let the MBP go to sleep on its own, and when I come back in the morning find a message that my Time Machine External Drive was disconnected without being properly ejected. In each case, one more backup was performed after I had left.
When waking up the machine, the drive was not being shown at first, but after a minute, it showed up without me doing anything or changing anything about the setup.
Anyone else? Any thoughts?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
before the upgrade, i could open time machine without the need for having the back up disk plugged in.

Ok. I got it to work, sort of....
As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

After upgrading to OS X Mavericks Time machine stops working

After upgrading to OS X Mavericks Time machine stops backing up and sometimes hangs on ,,preparing,, for o days and sometimes stops inmediatly. Report says:
Backing up to /dev/disk1s2: /Volumes/Backup/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
*** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndex:]: index 0 beyond bounds for empty array'

Is this a Firewire or Thunderbolt connected disk? There are know issues with that in Mavericks. If so try connecting the drive by USB as you continue.
Is it a WD drive? There appear to be issues with those drive on Mavericks.
Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
A4 - Full Reset of TIme Machine

Mavericks Time Machine Backup in Yosemite?

They say there are two kinds of people in the world. Those who backup and those who wish they did. I am the backup person, but when I did a clean install of Yosemite on my HD for a number of reasons, I cannot find my iphoto files (1000s of pictures). And I can't seem to utilize Time Machine at all. I have been able to manually drag files (music, documents, etc.) from the backup folder on the disk to the new system. But nowhere are my iphoto pictures....
So, where do I get the iPhoto files so I don't lose all my pictures? Is there a way to access a Mavericks Time Machine in Yosemite? Any help would be appreciated.
rog

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
The next part is "Users", followed by a slash.
Next is your (short) user name, which is also the name of your home folder.
Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

How to merge existing itunes library with another time machine volume?

hi all,
i am 2 macs, an iMac and a MacBook - both running Snow Leopard 10.6.3 and both running itunes 9.
is possible to merge the itunes library on the MacBook onto the iMac via my MacBook's Time Machine volume? i do not have my MacBook with me at this moment cos' i have sent it for diagnostic and repair. i have the latest itunes library backups on my MacBook's Time Machine.
hope to hear some valuable pointers. Thank you!

mook73 wrote:
is possible to merge the itunes library on the MacBook onto the iMac via my MacBook's Time Machine volume?
i have never attempted such an operation, so no step-by-step guide !
you will be able to restore the other Mac's library to the iMac. go here and follow the instructions: http://web.me.com/pondini/Time_Machine/17.html. restore whatever you need to a temporary location, i.e. the desktop.
if you only want the media files, just restore the iTunes music folder. when restored, use +add to library+ from the file menu or just drag the folder you restored to the +automatically add to iTunes+ folder inside the iTunes folder.
if you also want playlists, playcounts, and ratings, you should restore the entire iTunes folder.
take a look @ PowerTunes. this app should enable you to merge the two libraries.
good luck !
JGG

My new macbook pro retina recognizes, but can't transfer data from the Time Machine Volume

I back up my old 2008 MacBook Pro to a Time Machine volume sitting on a very new 2 TB drive that is connected to a Time capsule via USB. I got that new drive from OtherWorld Computing about 2 months ago.
I just received a brand new 2012 MBP (retina).
Pondini's page on setting up a new mac says that it's easiest just to transfer everything over the first itme you start up the new machine. (ref: http://pondini.org/OSX/Setup.html)
So, I took my new 2012 MBP, plugged it into the Time Capsule directly with ethernet (I have the Thunderbolt-to-USB connector).
Then turn it on.
The 3rd page into the startup sequence gives me a choice to "Transfer Information to this Mac". It offers 4 options
"From Another Mac"
"From a Windows PC"
"From Another Disk"
"Not Now"
I chose "From Another Disk"
Then it offers "Select the Source"
The sources are 4 blue icons. 2 of them are backups of other machines, ones that sit on the Time Capsule's internal drive. 1 is a small "media storage" space I saved on the internal drive of the Time Capsule.
The important one is "Macbook Pro backup ("StefanTimeCapsule")
This is the one physically parked in the external USB drive.
So.... I select it. It asks me to log on with user ID and password, and then says an endless "Connecting" message
It never gets to the next menu.
If I arrow "back" in the startup window sequence to the "Select the Source" windo, the 4 blue volumes are again displayed, with the word "Connecting" next to the backup I want, strongly suggesting that the "connection" is never fully established.
Just for fun I plugged that external USB drive directly into the USB port of the new Retina MBP, but it was not recognized at all.
I tried different ethernet cables.
At this point my thoughts are perhaps
(a) I need a powered USB hub
(b) I need to somehow have Apple service the Time Capsule (but for what? I don't know)
I could potentially just transfer from the Old 2008 Macbook Pro Directly, but it seems to me problematic not to be able to access the primary backup.
Any ideas out there?

A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
Do i have to make these Time Machines more open to connection?

Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network

Hi,
Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network.
Five minutes before upgrading it however performed successfully a last backup.
I found several posts on this forum and proposed solutions:
- restarted both the mac and capsule
- deleted the /Library/Preferences/com.apple.TimeMachine.plist (twice rebooting in between)
Still have the issue.

What brand of drive is it?
Disks You Can Use
Troubleshooting backup issues
Time Machine Can’t Find Backup Disk

Time Machine Volume and Disk Utility

I'm trying to figure out whether or not I can use Disk Utility's Repair Disk command on a Time Machine volume. Time machine is taking a very long time to finalize its backups. I don't know if there are directory issues that need to be addressed or if it's due to the very large size of the directory. I've been using Time Machine on this computer since last January and the Time Machine directory (the disk's catalog of files used by the OS) takes up over 7 GB of disk space! It's so large that DiskWarrior will no longer work on that volume. DiskWarrior, like all 32-bit OS X applications, has a limit of 4 GB. I can't be the only one in this situation. I don't want my Time Machine backup to get hopelessly corrupted and then have to start agin. I'm trying to be proactive about correcting any issues before they become serious.

See my reply to Steve Darden in this Topic.
You should not use Disk Utility in the normal manner. Time Machine uses hard links in a non-standard manner, which will cause normal repair utilities to complain, as Steve is finding.
If you read Time Machine: Troubleshooting backup issues you will see that it only recommends Disk Utility to "Attempt to repair the backup sparsebundle", not the actual Disk Volume itself.

Can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

If you want to and it is so large that it has room (350% is a good estimate for TimeMachine), then use a partition(s) to hold system restore images or bootable clones. Or VM images.
Using SSDs most Mac Pro models can easily hold 6 or more storage devices inside, except the nMP cylinder 6,1's; which do need external Thunderbolt and USB3.
System drive / data / scratch / backup data / backups of system / ....
I recommend a couple system backups, especially when faced with dual boot situations as well as an OS that is still undergoing updates and changes.

Can i restore my mavericks time machine to a snow leopard os?

I want to downgrade to SL from Mavericks. Can I restore my mavericks time machine files for use on a snow leopard?

I don't think there's any difference in the way TM operates, so 10.6 should be able to read the backup: however, note that many of your OS preference files will have been overwritten with new syntax that only Mavericks understands. So many of your settings won't work and the files may cause problems.
It's also worth mentioning that if you are downgrading because of crashing, slowness, or something like that, then Mavericks almost certainly isn't the cause in itself, but rather some incompatible third-party software doesn't work well in 10.9.
If you're just downgrading because you don't like some of the features, well, that's fair enough.

Mountain Lion Server App - Issue with Time Machine Volume Selection

Besides my gripes that 10.7 Server or the 10.8 Server app are radically dumbed down versions of what 10.6 Server was capable of, the upgrade to 10.8 from 10.7 unexpectably broke my home time machine backup.
Am quite familiar with the prior server versions as we are still using 10.6 Server on a dozen or so Xserve's, plugging along nicely
This is for our house setup using a Mac Mini with an attached 8TB RAID managing media serving and time machine backups. For simplicity, the array is partitioned as a single volume and simply configuring a file sharing sharepoint as a Time Machine Volume. Simple and easy!
When upgrading to 10.8 and then installing the server app, the upgrade conveniently didn't migrate any file sharing settings, forcing me to set them up again. Easy enough, just took a couple of minutes, except that the share point I used for time machine backups has no more setting to turn it into a Time Machine volume.
As such, under the Time Machine tab, which shows only logical volumes, I simply can't back up to our existing backups.
I suppose I can re-partition the array to create a logical volume for TM backups, but I can't believe that there is no provision to change a sharepoint into a TM volume anymore.
Am trying to stay away from CLI settings as well as that defeats the purpose of the app.
Any thoughts or suggestions?
Wolfman

I have asked the hosts to move your post to the OS X Server forum.

After a complete restore of Mac from a Time Machine volume, I don't want a full backup the next time Time Machine backs up.

After performing a complete restore of my Mac from a Time Machine volume, Time Machine wants to perform a full backup the next time it backs up.This is normal: http://support.apple.com/kb/TS1338
But I don't have enough free space on my external hard drive to do this because my external hard drive already contains one complete backup. My hard disc on my MacBook is 320 and my external drive is 500 GB, so it doesn't add up. I don't want to delete the original backup in case something goes wrong during the new full backup. What can I do?

You don't have too many options. The best approach would be to buy a larger external drive. The guideline for Time Machine is that you should have 2-3 times as much capacity on the external drive as data you're backing up. See item 1 of Time Machine - Frequently Asked Questions. In any case, you can't prevent that first full backup unless you're willing to turn off Time Machine permanently.

Copying a Time Machine volume to Time Capsule

One can transfer the contents of a Time Machine volume (external firewire hard disk) to a Time Capsule, can't one? Would SuperDuper work?

I don't believe that it is possible. Two different formats.

HT201250 Time Machine was disconnected.

My time machine was disconnected. Now the 'latest backup' says in red 'delayed'. 'next backup' says 'when disk is connected. But I have connected it so I'm wondering what to do now to back up my computer again? thank you

Try Here > http://pondini.org/TM/C2.html
From Section C Here > http://pondini.org/TM/Troubleshooting.html

Mavericks Time Machine Server - multiple client backups disappear and merge

Hi there,
In our environment, which is shop environment where many computers are worked on, we use a Mac Pro with roughly 5TB disk space running Mavericks server. Essentially, we rename the computers to be worked on (in the Sharing pane of System preferences), then use Time Machine to connect and backup using a Sharing Only account that exists on the server. The TM backups are verified using Migration Assistant by opening MA and making sure the option to restore is present, without the 'No Backup Volumes found' message, common with TM backups on the network. All OS's are backing up to our server, the oldest being 10.6 and the newest likely being 10.10 now.
Recently, we have noticed some backups seemingly disappear from the server. Just this morning, I looked at a VERY large sparesbundle and got curious.
Upon launching Migration Assistant and opening that very large sparsebundle, I was able to find all the backups that 'dissappeared'. This is very concerning, as all of these backups were verified using MA immediately after having been created. Migration Assistant is quit, the system shut down, and the computer's work proceeds.
A few bits of information:
-Computers sometimes come in to our shop (Apple Authorized) not being able to boot, so their storage volume is booted either via target mode or plugged in to another known good mac via a RocketStor Thunderbolt Dock, or simply directly in to another Mac
-if a computer boots it is backed up natively using it's own OS
-All of this takes place using AFP connections, and over an enterprise network, but devices are all plugged in to the same switch (at this point).
There seems to be no rhyme or reason to the disappearance of the backups, and they are very frustrating to attempt to locate when they 'go missing', especially since these backups are only looked for when a HDD is wiped and data is needed....
Any help is appreciated! As stated earlier, we are an Apple warranty authorized shop in a collegiate environment. Thanks all!
Best,
Chris
Message was edited by: cmburkhalter
Updated to make it slightly more clear

Linc Davis wrote:
I have indexing turned off for all my drives
I suggest you turn it back on, at least on the ones you want to back up.
Is this necessary? It seems to do half the backup without it. If I remember correctly I have indexing turned off not only because I don't use it but also because it was hanging up/using a lot of CPU... If I absolutely must I will turn the indexing back on and wait for it to do its dirty business, but I'm a bit reticent in trading my problem for one that I don't really have an interest in solving.

Mavericks Time Machine volume disconnects without eject on sleep

Similar Messages

Maybe you are looking for