MAVERICKS UPDATE AND ADOBE CS6

Hello, i am with Macbookpro mac os x 10.7.5 and i am going to update to Mavericks. I have adobe creative suit 6 (AE, PS, PR etc.) My question is-> When i updato to mavericks will all these programs and actually any program i have on my mac run as it runs on the 10.7. Will they work correctly? Please tell me i want to update but i want to work on the same programs. TY

See your duplicate post for answer already provided.
https://discussions.apple.com/message/25247889#25247889

Similar Messages

OSX Maverick and Adobe CS6 compatibilty

OSX Maverick and Adobe CS6 compatibilty
Any issues to note?

When you upgrade to 10.9 it installs the Java 7 JRE but there is no JRE6, so you HAVE TO download it from Apple before ANY CS5 or CS6 app will open. Other than that I haven't seen ANY issues with CS5.5 or CS6 in Audition, Dreamweaver, Fireworks, Flash, InDesign, Premiere, Photoshop, PSE9 or Lightroom 5.

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD display

after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

I have just downloaded firefox 3.6.11 and adobe flashplayer update and adobe reader update. Now I cannot get firefox to open. I have tried removing the program but when I try to do that it says that I need to close firefox - but of course it is not open

I have just downloaded firefox 3.6.11 and adobe flashplayer update and adobe reader update. Now I cannot get firefox to open. I have tried removing Firefox but when I try to do that it says that I need to close firefox - but of course it is not open. I have waited a long time but nothing has happened so I am getting desperate Thanks -- Jerry

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have Windows 8.1 and Adobe CS6 - acrobat just stoped working, won't open anything won't print to pdf. HELP!

Please help me!! I have Windows 8.1 and Adobe CS6 creative Suite. Adobe Acrobat x just quit, It won't open anything and it wont print to PDF. I need this for work!

Typically, the repair is done from the Control Panel>Programs & Features. In the future, try that route. Glad you found something that worked. When you do come to the forums for help, you may not get an immediate response, but may have to wait for someone familiar with your issue happens to check the forum, possibly after work. In any case, glad you have a working product again.

PSE 10 and Adobe CS6: When running silent install help is not working afterwards

Hello,
I'm not sure if this is the correct forum. If not: Please help me find the correct one.
I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
Kind regards
János

@hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
After you have deployed the package, separately install the products in the exception folder.
IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
http://www.adobe.com/go/aamee_exceptions
NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
###################################### Command to install AdobeHelp ######################################
InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

About Premiere: can Adobe CC and Adobe CS6 both run in the same computer?

Hi, I have the Adobe Premiere CS6 installed in my computer.
But now I'm gonna finish the edit of a film that someone already started editing.
This person was working with Adobe Premiere CC.
The question: If I install Adobe CC in my computer, will the Adobe CS6 still run?
Can Adobe Premiere CC and Adobe Premiere CS6 both run in the same computer?

Sure , you can run all the version of same computer , even you can CC 2014 , CC as well as CS 6 on same computer .

I stopped being able to open Adobe CC and Adobe CS6 Master Collection after installing Adobe CC

I have uninstalled and reinstalled Adobe CS6 Master Collection and Adobe CC multiple times only to have them a few days later fail to open any programs. Adobe CC also starts prompting for Adobe ID, but will not accept the ID and loops back. Has anyone seen this before? Win 7 Enterprise 64 bit.

first, fix your adobe cc: You are no longer signed into your Creative Cloud applications

Using Dell Latitude D630 with Windows 7 and Adobe CS6 - PCMCIA hardware accelerators?

I have a separate thread going using the hardware accelleration that comes with the Intel Mobile 965 Express Chipset not working
for me, and trying to figure out how to get OpenGL and 3d features of Photoshop CS6 to work.
So, I was thinking maybe a work-around. Are there supported PCMCIA card graphics accelerators that anyone could recommend
that would work with Windows 7 and interface via PCMCIA that meet the requirements to be used with Adobe CS6?

A Dell Latitude 630 isn't enough machine to do what you want to do, I owned one. Geerks.com had a great laptop today for 379.

I am using quicktime pro for apple codecs and adobe CS6 cant see them. I am using win7 64bit op sytem. Help please...

I am using Quicktime pro 7 the latest, on a win7 64bit PC machine.
Adobe Premiere and Encoder cant see it; has anyone had troubles and
how do i fix this problem..help. I am try to use the apple codecs for
digital editing "apple prores 422".

Hi Gary
thanks for your reply, look I was loading the latest Quicktime and paid for the latest version of Quicktime Pro for windows as well as updating Itunes. After restarting my PC, the apple codecs would not show in the codecs list when i was preparing the output specs which are for the Australian broadcast which my boss wants of:
1280 X 720, 25fps and Apple codecs prores 422.
Look I was wondering is there any area of Quicktime Player Pro that I have to turn on or off, I just wonder if I have to do something in Premier Pro or the other adobe program encore to convert certain levels of film from one level to another, as the camera crew I was with had 5 different levels of film to convert to the above format.
Do you have any other ideas that come to mind, I have had some troubles in the last six months with Indesign and Adobe pdf maker, I have alot of sucess with adobe before. I gratefull for any other hints. Cheers Hound Puppy

Mavericks: Firefox and Adobe reader as standard applications?

Mavericks: I want Firefox as my standard browser and Adobe reader to open PDFs. But every time I start my iMac, Safari and Preview are set as standards again. Example: when I click a link in Mail, Safari opens instead of Firefox. So every day I have to change these settings again. What to do?

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked
Allow user to administer this computer
Then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

My mac book pro does not boot up correctly anymore after doing some updates. I did have my ipod charging to my mac book. I ran the simple updates and never go to the maverick update and now my computer will not boot correctly. Help!

Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)

Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken. I hope that it helps.

Macbook Pro Retina and Adobe cs6

HI!
I'm pretty much ready to buy a Macbook Pro Retina and buy the adobe cs cloud too. I know Photoshop is to be updated to Retina, but I've not heard anything regarding Illustrator and After Effects.
My questiom is this: Does anyone know how non Retina compatible software, specifically cs6 or cs5 looks? I've read Engadget's review, which is very positive. However, they say non compatible programs look bad - blurry text etc.
Had anyone managed to get one yet, and whats your view with Adobes apps?
Everything else sounds ace (apart from the waiting times)!
Many thanks!

I've been reading the reviews etc, and looked at the Adobe forums, but I've not found that much main info.
Basically from all the reviews I have read, everyone thinks it's an excellent machine, and the Retina is great. Adobe's UI in CS6 apparently looks a bit blurry, but hopefully Adobe will fix this, and it's perfectly usable anyway.
Check out the Verge's review: http://www.theverge.com/2012/6/13/3082649/macbook-pro-review-retina-display-15-i nch
I've decided just to go for it, and ordered a Macbook Pro Retina, 2.3ghz with the extra 16gb Ram. My usual setup at my studio at work (I'm a freelance Illustrator and animator) is hooking my current 2009 MBP to my 20" Cinema Display.
Since I walk to work the slimmer design will be great, and if Adobe's programs are a bit dodgy on the retina display, it won't matter too much when I'm using my Cinema Display. It might make my display look old, but I'll probably upgrade that and get a 27" display in the future.
The retina display will be a nice addition for surfing the web etc.
Now if only Apple would release a non glassy cinema display again... Apple? : )
I hope that helps from my point of view.

Adobe Inspiration Browser Update and Adobe Air won't download/install?

I get repeated error messages, that it won't download/install. I followed the instructions. All I get is "a download error occurred. Try again?" Not much help there!!!!!! Now what?

Hi anon2011
Adobe has stopped supporting IB in PSE11 and is moving towards cloud sharing via Adobe Revel. In view of this I wouldn’t worry too much about installing or updating.
All of the tutorials can now be found on Adobe TV.

On May 24 installed latest Maverick update and now my Office 2008 (Entourage) crashes on open,

LOG: please help !
Process:         Microsoft Entourage [1898]
Path:            /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage
Identifier:      com.microsoft.Entourage
Version:         ???
Build Info:      Unknown-130206~0
Code Type:       X86 (Native)
Parent Process: launchd [143]
Responsible:     Microsoft Entourage [1898]
User ID:         501
Date/Time:       2014-05-25 22:28:03.723 -0300
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: CA622B44-00FC-6DE0-2E93-06BC2CA3B3D7
Sleep/Wake UUID: 2FAACDD1-EDFA-46D8-BCB8-21C3E7174E52
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/EntourageLegacy.framework/Versions/12/EntourageL egacy
Referenced from: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage
Reason: image not found
Binary Images:
0x8fe90000 - 0x8fec2417 dyld (239.4) <FF5ED937-CC28-3FEF-BCAF-750B1CDBAE36> /usr/lib/dyld
0x905bf000 - 0x907c1fff com.apple.CoreFoundation (6.9 - 855.16) <6283B27F-3C46-365F-932C-1A7102D8A3CF> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9085b000 - 0x908c4fff com.apple.SystemConfiguration (1.13.1 - 1.13.1) <3AD9C90B-40A9-312B-B479-3AB178A96EA1> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x909d2000 - 0x909d2fff com.apple.CoreServices (59 - 59) <06747539-5035-3307-8645-9BC4E7F89023> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e70000 - 0x9219bffe com.apple.Foundation (6.9 - 1056.13) <C33A8984-7E97-36BE-B842-EE4FE35F53EA> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x9268b000 - 0x92907fe7 com.apple.QuickTime (7.7.3 - 2826.19) <AEF12245-C9D5-3B50-8AB6-45DC794E693E> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x92e0d000 - 0x92e0dfff com.apple.Carbon (154 - 157) <C49AD4A1-8DE3-357D-AEF3-D6CD39EA91EF> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x93ae7000 - 0x93d56ff6 com.apple.security (7.0 - 55471.14.4) <4C9E60A9-6861-3AFF-BEB8-637771FEC78B> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9b623000 - 0x9b623fff com.apple.ApplicationServices (48 - 48) <7967F6FA-2984-3CC3-AD9A-7B9AEC562A2A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9250315ASG, 250,06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:

Identifier:      com.microsoft.Entourage
Version:         ???
Build Info:      Unknown-130206~0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/EntourageLegacy.framework/Versions/12/EntourageL egacy
Referenced from: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage
Reason: image not found
Follow the path to see if you file is actually missing:
Applications > Microsoft Office 2008 > Office > EntourageLegacy.framework> Versions>12
(Control-Click (Right-click) to view contents
Download and run the Mavericks combo updater.
OS X Mavericks 10.9.3 (Update (Combo)
http://support.apple.com/kb/DL1746
Run Repair Permissions
To use Repair Permissions:
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the First Aid tab and select Repair Permissions
3. Click on the icon for your boot volume.
4. Click the repair permissions button.
Check to see if Entourage opens. If not you'll need to re-install.
A simple remove and re-install should work. Be sure to update to v 12.3.6
Office for Mac 2011: Remove Office
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
Original DVDs of Office 2008 come with the installed version 12.0.0. Newer shipping DVDs install 12.1.0 (SP1) or 12.2.0 (SP2)
After installing verify version installed. Manually download or select "Check for updates" under Help in the Menubar in any Office application to update fully. If you do not update fully after reinstalling Office 2008, your identity might fail to open.
Manual download:
Updaters must be applied in order.
12.1.0 SP1
http://www.microsoft.com/en-us/download/confirmation.aspx?id=7799
12.2.0 SP2 requires 12.1.0 or higher be installed
http://www.microsoft.com/en-us/download/confirmation.aspx?id=17575
12.3.6 Requires 12.2.0 or higher be installed.
http://www.microsoft.com/en-us/download/details.aspx?id=29723

MAVERICKS UPDATE AND ADOBE CS6

Similar Messages

Maybe you are looking for