Mavericks use super high memory after upgraded from 2008 early

I suffered this pain after I upgraded from 10.7 to 10.9 on my early 2008 MacBook Pro.
Just as image shown above, I don't know what reason will cause this problem. It usually gets high with unknown operation.
I only get 4G memory. After I start 10.9, its kernel process and finder process consume almost 2/3 memory, it is so reduclous.
Is there any way I can reduse the memory usage of finder or prevent it eats memory so high ?

arthur, thank you,
I do worry about it, because 4G is not enough any more for these memory monster =.=
They together eat almost 3.99 GB memory, so that Mac becomes slow and shows SBBOD a lot and not responsive for many many seconds. It slow down my daily work a lot.
Here is the info from Etresoft:
Hardware Information:
          MacBook Pro (15-inch Early 2008)
          MacBook Pro - model: MacBookPro4,1
          1 2.5 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 2:0:16
Disk Information:
          FUJITSU MHY2250BH disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 249.2 GB (24.95 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.0)
          foo.tap          (1.0)
          foo.tun          (1.0)
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
          tap: Path: /Library/StartupItems/tap
          tun: Path: /Library/StartupItems/tun
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
          [loaded] com.eltima.ElmediaPlayer.daemon.plist 3rd-Party support link
          [loaded] com.google.keystone.daemon.plist 3rd-Party support link
          [loaded] com.ipvanish.helper.openvpn.plist 3rd-Party support link
          [loaded] com.ipvanish.helper.pppd.plist 3rd-Party support link
          [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [loaded] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
          [loaded] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
          [failed] com.adobe.ARM.[...].plist 3rd-Party support link
          [loaded] com.google.Chrome.framework.plist 3rd-Party support link
User Login Items:
          Android File Transfer Agent
          Google Chrome
          SpeechSynthesisServer
          VMware Fusion Start Menu
          Tunnelblick
Internet Plug-ins:
          o1dbrowserplugin: Version: 4.9.1.16010 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 3rd-Party support link
          OfficeLiveBrowserPlugin: Version: 12.3.2 3rd-Party support link
          RealPlayer Plugin: Version: (null) 3rd-Party support link
          Silverlight: Version: 4.0.60129.0 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          googletalkbrowserplugin: Version: 4.9.1.16010 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 8.2.4 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 45 3rd-Party support link
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
          fbplugin_1_0_1: Version: (null) 3rd-Party support link
          fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
          Flash Player  3rd-Party support link
          Flip4Mac WMV  3rd-Party support link
          Growl  3rd-Party support link
          Java  3rd-Party support link
          MacFUSE  3rd-Party support link
          Perian  3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          RipIt:          Version: 1.6.2 - SDK 10.5 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 232.09 GB Disk used: 208.85 GB
          Destinations:
                    TimeMachine [Local] (Last used)
                    Total size: 200.00 GB
                    Total number of backups: 53
                    Oldest backup: 2013-05-27 16:45:13 +0000
                    Last backup: 2014-01-11 18:12:03 +0000
                    Size of backup disk: Too small
                              Backup size 200.00 GB < (Disk used 208.85 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              11%          AddressBookSourceSync
               4%          WindowServer
               2%          Google Chrome
               1%          eclipse
               1%          EtreCheck
Top Processes by Memory:
          1.45 GB          Finder
          401 MB          eclipse
          135 MB          Google Chrome
          70 MB          Skype
          49 MB          WindowServer
Virtual Memory Information:
          39 MB          Free RAM
          1.52 GB          Active RAM
          1.48 GB          Inactive RAM
          451 MB          Wired RAM
          1.65 GB          Page-ins
          12 MB          Page-outs

Similar Messages

  • Certificate errors after upgrade from 2008 r2 to 2012 r2

    After upgrading a DC from 2008 R2 to 2012 R2, Outlook will no longer connect to outlook.office365.com.  This appears to be a direct result of the upgrade, worked before and failed after.
    I get a flurry of message boxes when I launch Outlook, and it will run but not connect.  No path through the messages (granting permission to ignore the error, or installing the certificate) makes any difference.  Not seeing anything in the event
    logs, and have no idea how to fix this.
    In addition, IE is now raising cert complaints on every site, doesn't matter which.  Firefox seems to be managing okay, for the most part.
    Thanks for any guidance.

    Hi Michael,
    I am so sorry for the delay.
    I was trying to find more useful information about this issue, though there are very little information other than installing the trusted root certificate which is provided by the KB
    article above.
    I would suggest you download a
    certificate chain and install it.  
    If this method still couldn’t help you solve this issue, since you are using third party certificate (VeriSign) for your organization, you can get more efficient support by contacting
    third party support services.
    More information for you:
    Installing a Certificate Chain for Communicator Web Access
    http://technet.microsoft.com/en-us/library/dd441378(v=office.13).aspx
    Have a nice day!
    Amy

  • Can't queue a build after upgrading from 2008 to 2012 (TF246021)

    Hi,
    We're trialling an upgrade from TFS 2008 to 2012.4. New TFS has been set up on new hardware with new slq and build boxes. Then we imported 2008 backups and used TFSConfig to import / upgrade them. No errors or warnings where shown.
    Unfortunately we can't queue any builds on the collection. Even a brand new definition in a new team project building "hello world". Builds in other collections work OK.
    The error we're getting is 
    "TF246021: An error occurred while processing your request. Technical information (for administrator): SQL Server Error: 2601"
    Exception Message: Cannot insert duplicate key row in object 'dbo.tbl_BuildQueue' with unique index 'PK_tbl_BuildQueue'. The duplicate key value is (2, 1). (type SqlException)
    SQL Exception Class: 14
    SQL Exception Number: 2601
    SQL Exception Procedure: prc_iiQueueBuilds
    SQL Exception Line Number: 553
    SQL Exception Server: TFSSQL001\INST1
    SQL Exception State: 1
    SQL Error(s):
    Exception Data Dictionary:
    HelpLink.ProdName = Microsoft SQL Server
    HelpLink.ProdVer = 10.50.4000
    HelpLink.EvtSrc = MSSQLServer
    HelpLink.EvtID = 2601
    HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
    HelpLink.LinkId = 20476
    Exception Stack Trace:    at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.MapException(SqlException ex, QueryExecutionState queryState)
       at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.HandleException(Exception exception)
       at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.Execute(ExecuteType executeType, CommandBehavior behavior)
       at Microsoft.TeamFoundation.Build.Server.DataAccess.BuildQueueComponent5.QueueBuilds(IEnumerable`1 requests, QueueOptions options)
       at Microsoft.TeamFoundation.Build.Server.TeamFoundationBuildService.QueueBuilds(TeamFoundationRequestContext requestContext, IList`1 requests, QueueOptions options)
       at Microsoft.TeamFoundation.Server.WebAccess.Build.ApiBuildController.QueueBuild(String definitionUri, String controllerUri, String whatToBuild, String shelveset, Nullable`1 checkin, String priority, String dropFolder, String msbuildArgs)
       at lambda_method(Closure , ControllerBase , Object[] )
       at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters)
       at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters)
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
       at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
       at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
       at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
       at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
       at System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult)
       at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
       at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
       at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    I found a thread with similar error but it doesn't help us.
    http://social.msdn.microsoft.com/Forums/en-US/ec3f9a9d-0c93-422b-bbc4-959e1e6bfe59/tf246021-an-error-occurred-while-processing-your-request-technical-information-for?forum=TFService
    Any help will be much appreciated.

    Hi Rad,  
    Thanks for your post.
    Daniel provided us the helpful suggestion, please confirm that.
    If install the new Build Service cannot resolve this issue, and according the error message: Cannot insert duplicate key row in object dbo.tbl_BuildQueue with nique…, it seems that this issue relate to your TFS database,
    we suggest you contact a Professional Support Service at
    http://support.microsoft.com/common/international.aspx?RDPATH=gp;en-us;offerprophone to gain more support on this case.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • I have this empty black box in middle of screen with cursor in it after upgrading from SnowLeopard to Mavericks - any help???

    I have this black outlined box with cursor stuck in it after upgrading from Snow Leopard to Mavericks -- any help??? I can't get rid of it.

    From another thread.
    https://discussions.apple.com/message/24902799#24902799
    Go to accesibility/zoom/more options/show rectangle... and uncheck that.
    Strange outline rectangle on my screen...

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

    After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.)  Has anyone encountered this issue, and can you suggest a workaround? Thank you!

    Known bug - already fixed - get the latest FM11 patch

  • Maxdb give Kernel error after upgrade from 7.3 to 7.5

    Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
    dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
    ERR
    -24994,ERR_RTE: runtime environment error
    1,Check knldiag! Kernel died before reaching ADMIN state
    The details of the error in knldiag are:
    2008-07-02 14:22:39    19     11554 COMMUNIC UKT8 attached big comseg at  0x700000060000000
    2008-07-02 14:22:39    19     11555 COMMUNIC UKT8 big comseg ends at      0x7000000601803F8
    2008-07-02 14:22:39    16 ERR 20152 RTE      UNIX change owner with chown(knltrace,964,202) failed: Not owner
    2008-07-02 14:22:39    16     11000 vdevsize 'knltrace', 666 failed
    2008-07-02 14:22:39    16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
    2008-07-02 14:22:39    16 ERR 11599 BTRACE   -
    > Emergency Stack Back Trace <----
    As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
    We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
    We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
    thanks

    Hello Thomas,
    -> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
         Please check the upgrade log in the /sapdb/data/wrk
    -> Please check the ownership of the files in the database RUNDIRECTORY.
    For example, if the database owner:group of your database is sdb:sdba, then
    -rw-rw----   1  sdb        sdba  u2026.     knltrace
    -> Please update the thread with the output of the following commands :
               sdbregview -l
               xinstinfo SD3
               id sdb
              ls -l <runditectory>
    < rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
            more /etc/opt/sdb
    Thank you and best regards, Natalia Khlopina

  • Graphics instability and crashing after upgrade from FF 32 to 33

    Soon after upgrading from 32.0.3 to 33 (Windows 7), I was seeing occasional flicker-like split-second black flashes. (I *think* this was mostly when opening new pages, but I don't recall for sure...maybe also when scrolling). Then a few minutes later I was scrolling a page with my laptop touchpad and the screen flashed completely black, stayed that way for about a second, and then came back up with a Windows message that Intel Graphics had recovered from a crash. (Which is doubly interesting given that FF set to use my discrete NVIDIA graphics on this computer.). I haven't seen anything like this happen in the nine months I've had this laptop, with or without FF open. There was also a message that FF had crashed.
    Then I restarted FF, and all was going OK, except that I believe I still saw a few split-second "in the blink of an eye" black screens as I opened new pages. But then I went to Google Maps, and was dragging a map upwards. But instead of the lower portion of the map moving into view, I only got a blank white screen. The further up I dragged the map, the more of the the screen that was blank white, until it was completely white. Then FF crashed again.
    I thought the new FF native H.264 might be causing the issue so I disabled it and restarted FF. But then I went back to Google Maps, tried the same thing and had the same issue (but no associated crash, although I closed FF very soon after I saw the odd graphics behavior recurring so maybe I didn't give it enough "time to crash").
    I re-installed 32.0.3 and all the issues went away. FWIW, I've had occasional crashes and slowdowns with 32 and other recent versions. (I could recover from the slowdowns just by restarting FF.) Most of those issues seemed to be associated with Adobe Flash. That behavior was an occasional annoyance but nothing of the magnitude of what happened when I tried FF 33. I don't know if this latter observation adds anything, but I just thought I'd throw it out there. Fyi, the laptop has 2.4 Ghz CPU (Intel i7) and 16GB memory.
    Any ideas? Thanks.

    Today when I noted that Lenovo still hadn't released an updated driver specifically for the Intel Graphics, I went back and installed a Lenovo NVIDIA Optimus update that I had tried 4 or 5 months ago but had subsequently reversed because it had created problems with Firefox. (Specifically, it was causing Firefox context menus to render slowly and incompletely.) Not only does the NVIDIA update no longer cause the FF context menu problem, it seems to have *solved* the problem I posted about here. It updated the NVIDIA driver ("GPU #2" above) from version 9.18.13.1269 to version 9.18.13.3302.
    This makes some intuitive sense, since -- as I said above -- I have Optimus set to use the NVIDIA graphics with Firefox instead of Intel. (I had thought that, based on what I read in Lenovo support, the NVIDIA Optimus update might install a new Intel Graphics driver as well, but the Intel driver is still shown as the same version listed above (8.15.10.2725). (I don't know whether or not these driver numbers might be Lenovo-specific.)
    Anyway, the NVIDIA Optimus update fixed my problem, so thanks for pointing me in the direction of graphics drivers. (I suppose there's also a small possibility that something had simply gone awry with my first update to FF 33, and that what really solved things was simply reinstallingl...)

  • Bad performance on CF9 after upgrade from CF8

    Hello and happy new year for everybody 
    I'm stuck with a problem after upgrade from CF8 entreprise to CF9 entreprise.
    We are using IIS6 on WIN2003R2 (SP2).
    There are a lot of  "503 Server Error" with no content. (about 0.05% of request). This can be occured on big or small CFM, graphic ressources, etc...
    For each error I can see the following error on the connector logs (jrun_iis6_wildcardYYMMDD.log).
    2011-01-02 19:00:05 jrISAPI[1456:3940]  returning error page for JRun too busy or out of memory
    I've never seen this message in previous CF connector version.
    And on the jrun log (coldfusion-outXXX.log), I read the following errors:
    02/01 20:53:31 error unexpected end of part
    java.io.IOException: unexpected end of part
        at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
        at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
        at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
        at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
        at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
        at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
        at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
        at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
        at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
        at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
        at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
        at coldfusion.CfmServlet.service(CfmServlet.java:200)
        at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
        at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
        at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
        at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
        at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
        at jrun.servlet.FilterChain.service(FilterChain.java:101)
        at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
        at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    02/01 20:53:31 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@4006ca]) JRunPRoxyServer.invokeRunnable:
    java.lang.IllegalStateException
        at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
        at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    java.lang.IllegalStateException
        at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
        at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    Connector settings (jrun_iis6_wildcard.ini) :
    verbose=false
    Buffer=true (I've tried with false)
    serverstore=C:/ColdFusion9/runtime/lib/wsconfig/1/jrunserver.store
    bootstrap=127.0.0.1:51800
    apialloc=false
    maxworkerthreads=100 (I've tried to increase/decrease this value)
    JRUN settings:
    Threads number: 150
    Max queued jrun threads: 150
    Is anyone have experience the same issue ? How can I try to solve this ?
    Big thanks!

    @Charlie:
    in the cf\runtime\logs there is only that kind of information:
    05/01 10:28:44 error unexpected end of part
    java.io.IOException: unexpected end of part
        at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
        at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
        at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
        at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
        at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
        at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
        at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
        at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
        at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
        at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
        at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
        at coldfusion.CfmServlet.service(CfmServlet.java:200)
        at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
        at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
        at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
        at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
        at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
        at jrun.servlet.FilterChain.service(FilterChain.java:101)
        at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
        at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    05/01 10:28:44 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@16c00e2]) JRunPRoxyServer.invokeRunnable:
    java.lang.IllegalStateException
        at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
        at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    java.lang.IllegalStateException
        at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
        at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
        at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
        at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
        at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
        at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
        at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
        at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
        at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    There is no line about a memory issue!
    These errors happening on random request not ALL!! (arround 0.05%), and there is no real link between load and this... Our applications handle a lot of POST download, but like I've described before, error can occured on classic cfm page and static ressource...
    What I mean with upgrade CF8 to CF9, is with our 10 other servers running on CF8, I've never see that 503 issue outside a real jrun problem (like a memory crash, restart, etc...)
    @Carl:
    Server is running on WIN2003R2SP2 32 bits OS (dual Xeon E5506, 4Go RAM). Here is the jvm.config arguments:
    # Arguments to VM
    java.args=-server  -Xms1024m -Xmx1024m -Dsun.io.useCanonCaches=false -XX:PermSize=256m -XX:MaxPermSize=512m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
    Do you know if it should be possible to try old JRun connector used by CF8 ?

  • I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    Did you check your security software settings? eliminating conflicts from third-party security software.

  • Hello I am using iPhone 5s but after upgrading to iOS 8.0.1 I am unable to signin my iCloud account ?

    Hello
    i am using iPhone 5s, but after upgrading to iOS 8.0.1 I am unable to sigin my iCloud account
    whenever i try to signin it shows " verification failed" / " the password you entered in incorrect"
    i changed by Apple ID PASSWORD three times and tried to signin but it shows same as above - verification failed / password is incorrect
    please suggest
    regards
    karan deep singh

    I believe that all iPhones, purchased in Egypt, from official sources, are sold as carrier locked. So, your phone was hacked by someone so you could use it in Germany. Sorry, but that's what happens to hacked iPhones.
    No one here can help you, nor can/will Apple, and since none of the carriers in Egypt offer official unlocking, your choices are not good.

  • Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

    I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
    There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
    One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
    machine 10.6.1. with RDC 2.0.1 (non-working)
    9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
    On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
    9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
    9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
    Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
    Any help would be appreciated

    Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

  • On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    I think you are sailing in uncharted waters with those kind of modifications.
    I am only guessing, but if you have not already done so,  do a PRAM reset and then trash your FCP preferences.
    Big Poppa Chris wrote:
    I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
    My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
    MtD

  • Problems after upgrading from 10.2.3 to 10.2.8

    After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

    Hello rick,
    First of all, welcome to the Apple discussions.
    * How did you upgrade the OSX 10.2.3??
    * Did you use the combo update?
    * Did you run the dick repair permissions before an after
    Here is the Combo Update for OSX 10.x
    Combo Update
    An here is how you use the disc repair permissions
    About Disck Repair Permissions
    Applications Quits
    Let me know if so ...
    Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
    Dimaxum <]:~))

Maybe you are looking for

  • EXCEPTION_ACCESS_VIOLATION on forName0

    Java crash on forName0 method, please help # An unexpected error has been detected by HotSpot Virtual Machine: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d60171d, pid=16036, tid=7036 # Java VM: Java HotSpot(TM) Client VM (1.5.0_10-b03 mixed m

  • How do you apply multiple songs or audio clips to one slideshow?

    I created a large project, 200+ slides. I wanted to to use multiple songs so when one ends a new one comes on. Everytime a dragged a new audio clip from Itunes it just replaced the other song. 

  • NOKIA ASHA 201 PROBLEM

    Im using a nokia asha 201, im having problems using my email app. Everytime i try using the app it tells me application not ready. I can u please help me.

  • Simple external drive question please

    Hi all, quick and probably rather basic question here.... I have a mac mini which we use as a family internet channel, email and the occasional synching of an Iphone and iPod Touch. I am getting memory almost full messages from my mac mini. It is. Ho

  • Info record and pro

    How does Info Record tie in the procurement cycle, or how does it integrates with the purchase cycle Thanks Ganga