Mavericks Vimeo Sound Problem

Hi, since i updated to mavericks, it appears a problem with vimeo (only!!) When i watch a film there it appears a flanger/clicking sound..don't know how to fix

Have you tried a PRAM reset?

Similar Messages

  • I play music on my hi fi via an airport express attached to my iMac. Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before. I have reset the airport express and reconfigure my wireless settings.

    I play music on my hi fi via an airport express attached to my iMac.
    Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
    I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
    I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
    Has anyone else been having the same types of problem, and better still has anyone got the answer?

    When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.

  • Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

    My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1.  I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

    Did you install the latest driver set for the device?  there is a new release on motu.com for mavericks.
    rachel

  • I play my music via an airport express attached to my hi fi system. Since upgrading to maverick the sound quality is very poor. It sounds very flakey with the volume level going up and down. Tried Ethernet and wireless, but no good

    I play music on my hi fi via an airport express attached to my iMac.
    Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
    I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
    I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
    Has anyone else been having the same types of problem, and better still has anyone got the answer?

    Radcolt wrote:
    So if I connect my ipad or iPod to an airport express that is being "extended" from the main airport express (the main router which is plug into my audio system), I should still be able to listen to my music, correct?
    Yes but be sure to turn on Airplay at whatever Airport connects to the audio.
    Radcolt wrote:
    Also, will the date rate be decreased if they are connected by cat 5e Ethernet cable?  I thought signal drop is minimal.
    That's a whole different ball game and a much better solution if it's practical to implement.  The data rate will not decrease.

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

    So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
    I thought that was odd...but then the problems really started.....
    After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
    Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
    (and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
    Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

    by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
    I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

    I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
    I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
    I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

    Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
    Hope it helps.
    Regards,
    Waseem,
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Any resolution to the sound problem?

    I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it.  I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix.  The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers.  I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
    Is there anybody else out there with this problem, and has been able to resolve it?
    Thank you.

    I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem.  I don't recall any problems setting it up.  But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to).  Not sure why the preference wouldn't stick.  And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

  • Sound Problems on iPad: how to fix, easy [video]

    Hi dear iPad user,
    Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
    I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
    So I made a video (short: 1m40s):
    https://www.youtube.com/watch?v=FjBP-Ncj_fE
    It shows:
    how to unmute the sound (even if the side-switch locks the rotation of the screen)
    how to put volume up
    how to close all the apps (in the case there is an App messing with the sound system)
    how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
    What it won't fix: if you have a hardware problem...
    If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
    Hope this helps!
    Everson.

    UPDATE: fixing iPad Sound after iOS 7
    http://youtu.be/SDf1LDcE95Q
    (1min 36sec)
    It covers the basics:
    checking side-switch / mute / "Control Center"
    volume all up
    ...and also the worst cases:
    closing all apps (for rare cases when a single app might render the sound system instable)
    rebooting the iPad
    So, don't get desparete: try the things in the video.
    There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
    On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
    Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

  • Please Help - sound problem

    After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
    Any Ideas????
    [Edited by: admin on 02-Apr-05 15:40]

    Hi Nick,
    Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
    To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
    1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
    2. Check Software. This is where the fun begins.
    2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
    2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
    2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
    2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
    2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
    2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
    HTH

  • USB Sound Problem

    I'm having a problem with my Bose USB sound system that has just recently developed. The system is plugged directly into the back of my Mac Pro desktop so it's not going through any hubs or secondary systems. When I first start my computer the sound works just fine. But after about 10 to 15 minutes of use the sound stops completely - as if the sounds have been turned off. If I boot into Windows 7 using Boot Camp, the sound system there works just fine with no problems at all, so I do not believe this issue is hardware related but is something associated with OS X.
    This all started recently after installing Tinker Tool and then realizing that their latest version is not compatible with Snow Leopard. I followed their directions and told Tinker Tool to restore the previous settings and then I removed it from my system. Now, I'm having this USB sound problem. I think it's highly probable to be the cause of my problem.
    Is there anyway to reinstall the USB drivers in OS X without reinstalling the entire OS? Or, is there something else I can try to restore the USB function to Snow Leopard? Many thanks for any tips or suggestions.

    They are plug and play.
    I did try unplugging all of the USB devices and then powered off the computer and unplugged it for about 5 minutes as I heard that that sometimes solves USB problems. However, upon reconnecting the problem returned. All other USB devices seem to be working normally - it's only the Bose sound system. I tried plugging it into a different USB port in the back of the computer but the problem continued after about 10 minutes. Therefore, I am convinced this is not hardware related.
    At this point I am thinking I need to reinstall OS X Snow Leopard to undo whatever Tinker Tool damaged. Is it possible to just replace the USB drivers in OS X without reinstalling everything?

  • A30 sound problem

    have tried all drivers from toshiba web sites, uk, canada, europe etc but cannot get sound to work on my satellite a30, model no PSA33E 7C3F3 EN, fresh install of xp had 4 drivers missing, ati video, smbus, modem and sound, only drivers from canada site worked for video smbus and modem, xp states sound working properly but no sound from speakers or headphone socket and have checked all volume levels (on full nothing muted), any ideas ???

    Hi,
    Just to inform you that my problem was solved by itself :)
    I've reformatted my laptop and installed the original XP Pro SP2 again by following the instructions.
    Sound problem was solved automatically, no chipset utility installation required..
    The sound problem was probably caused due to missing Microsoft KB835221 update for SP1, and KB888111 for SP2, which then was solved with the original latest XP..
    Rgrds..

Maybe you are looking for

  • How to make picture inside frame leaving bits of the picture out?

    Hey Sorry for the cryptical topic name. What i would like to do is use a frame with a picture so that the part of the picture that is inside the frame is visible and the part that is out of frame is not visible... Can somebody please assist me in acc

  • My wrt1900 is now unplugged

    i'd say it started about 2 months ago and i had to unplug and go back to the old unreliable netgear router that is slow and keeps kicking android devices off. I don't know what happened, but one day i could no longer log in to smartwifi, kept telling

  • ITunes Not Syncing Album Info

    An album I had in my iTunes library had the wrong year in it so it was not in the correct order chronologically so I changed the album release year in this case from 2008 to 1994. However despite it changing in iTunes OK when it syncs over to my phon

  • Configuration Cisco switch 802.1x for ISE

    Hi dears, I configurated EAP_FAST authentication on Cisco ISE  from Cisco Video material. Now I need full 802.1X configuration in cisco switch  guide or video link. Please provide this. Thanks.

  • Modify deleteSelectionState of InsertTextOperation of TextOperationEvent possible?

    Hi, I have a spark textarea component listening to TextOperationEvent.CHANGING inside creationCompleteHandler. text_area.addEventListener(TextOperationEvent.CHANGING, textChangingHandler); What I want to do is when the user inputs "a" the InsertTextO