Mavericks X 10.9.4 does not recognize Canoscan 8800f scanner

I was previously using my Canoscan 8800f scanner. I had Canon on the phone for 30 minutes trying to resolve my scanning issue. I download all of the drivers necessary (see below) but I get a "Fatal Exception" message when opening the Canon Navigator. The Canon Support representative could see all of the appropraite software was installed, yet the Mac was not recognizing my scanner. The scanner was plugged into two different USBs with no success. The support rep suggested either get a new USB cord or call Apple. Hel
1) File Name: msd_-mac-8800f-13_9_2a-ej7.dmg 
This file is a TWAIN-compliant scanner driver for Canon color image scanner.
2)
File Name: mmno-mac-mpnv10-1_0_0a-en.dmg 
In OS X v10.7/10.8/10.9/10.10, you will need to set up MP Navigator EX 1.0 Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons on the machine. 
3)
File Name: mnve_1_0-mac-all-1_0_8-ej7.dmg 
This application software allows you to scan, save and print photos and documents. You can also edit images, or attach images to e-mail using this application software. 

Check in the Mac App Store to see if there are any new drivers for it. If not then try using Image Capture (already installed on your iMac) and attempt to scan from that. If you have never use IC then please click Mac Basics: Using a scanner - Apple Support for instructions.
If the scanner still cannot be seen then it's not directly compatible with OS X and you will need to buy a tool such as VueScan.

Similar Messages

  • Quick menu does not recognize my Canon scanner

    I've been using my Canon 9000F scanner for a couple of months. Added an iX6520 printer today and installed all the software. The Quick Menu no longer recognizes the scanner. How do I trouble shoot this? Thanks.
    System: Windows 7 x64

    Hello Mike9685,
    Please try disconnecting the scanner and connecting it back into the computer again.  Be sure it is connected via USB cable directly to the computer instead of going through a USB hub or the like.  If the issue persists, please try scanning with the MP Navigator software the scanner came bundled with, to help test the issue.  If all else fails, please reply with the specific error or message that occurs when you attempt to scan.
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Mac version of Elements 12 does not recognize HP L7680 scanner

    Can anyone suggest a fix?

    I installed the driver and restarted the computer. When I tried to activate the driver it launched Elements 12 and I got the following error:

  • TS3276 How do I open Microsoft word documents in a Email since Maverick does not recognize MS Word?

    How do I open a Microsoft Word cocument in a Email since I upgraded to Maverick. Maverick does not recognize MS Word, Excel and Power Point.

    MS Office 2008 and 2011 work fine in Mavericks. What version are you using? You can always use a program such as Open Office to open the docs.
    Pete

  • Time Machine in Mavericks does not recognize previous backups

    Hi!
    I've just installed Mavericks and Time Machine does not recognize my previously existing backups. Tried reconnecting to my backups and nothing changed (I have used this successfully in the past with Lion). Decided to do a full new backup in another drive, which worked fine, and after deselecting that drive in TM preferences and selecting it again it also does not recognize the new backup and indicates it is going to do a full new backup... Any suggestions?
    Besides the problem of not recognizing previous backups, this is problematic for me because I am used to do 2 different TM backups in 2 different locations and it was very easy just to select the corresponding disk in each location and TM would recognize the existing backups and just follow on the incremental backup. Now this seems to be impossible in Mavericks...
    Any help will be much appreciated.

    FireWire or thunderbolt?
    FireWire and thunderbolt HD interfaces seem to be universally affected.   I've seen no exemptions yet to same
    There is no resolution to this yet, techs are working on it
    Its happening on 80% WD Raid My Book on this board and others, and happening entirely on Firewire and Thunderbolt drives and apparently all WD Mybooks
    Its seen on O Raid and 1 Raid both alike.
    also occurring on LaCie (Seagate) FW drives.
    until resolution , use external USB drives proven to work with Mavericks.

  • Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

    Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

    Cedip,
    in September 2012, following the release of Mountain Lion, Phonic advised Firefly owners that their products’ support ended with Lion — with the possible exception of the Firefly 302 USB. Since they didn’t support the Firefly 302 FireWire under Mountain Lion, they’re not going to support it under Mavericks either. (Note that Mavericks was first released eight months ago, not one year ago.)

  • Mavericks does not recognize audio CD's on iMac

    Mavericks does not recognize audio CD's on iMac. Is there a solution for this?
    My first time on this platform as could not find a solution on net.
    B

    +1 here
    iMac with OS X 10.9.5 does not recognize CDs on external superdrive. Tested with two separate external drives. CDs not defective. No issues with DVDs. Any solution available?

  • After OS X Maverick download my mac book air does not recognize my external hd

    after OS X Maverick download my mac book air does not recognize my external hd

    Finder > Preferences > General
    Make sure External Disks is selected.

  • Mavericks on my late 2013 Mac Mini (8gb RAM) does not recognize my APC650CI UPS as a UPS

    I have a late 2013 model Mac  Mini running Macvericks.
    I just bought a an APC Back-UPS XS 650CI for it (I have 3 other Back-UPS 650CI for other systems - Windows 7 and 2x Netgear NAS setups).
    In the Energy Saver panel of System Preferences the Back-UPS 650CI is not recognized, but it IS correctly listed in the USB section of System Profiler.
    I have tried other UPS monitor programs: PowerSave UPS does NOT recognize it, but apscupsd DOES recognize it.
    The Netgear ReadyNAs DOES recognize the new unit (I tried swapping the two Back-UPS XS 650CI's around)
    I have reset the UPS - still not recognized.
    I have tried on of the other Back-UPS XS 650CI's that I have around - not recocognised.
    I have reset the Mac's Pram - still not recognized
    I have reset the Mac's SMC - still not recognized
    I have reset the com.apple.PowerManagement.plist - still not recognized
    My ancient Macmini1.1/Intel Core Duo DOES recognize the Back-UPS 650CI in the Energy Saver panel of System Preferences.
    Thanks for your help
    Andrew

    Answering myself
    Had long conversations with APC/Schneider (quite helpful once you get past the drones)
    They weren't aware of the problem but it does seem that Apple have removed/omitted the code that used to recognize the APC Back-UPS XS650CI at some point after Snow Leopard - Lord knows why.  This despite the fact that it is correctly listed in the USB section of System Profiler.
    The only solutions that I can see is either for APC/Schneider to get Apple to reinstate the relevant code (unlikely) and/or for APC/Schneider to issue an updated version of PowerChute for Mac (long overdue), which is possible but don't hold your breath.
    I bought the (rather expensive) PowerSaveUPS app from the Apple Store but that doesn't work either (http://www.powersaveups.co.uk/) - I've emailed them to grumble but no reply yet.
    In the meantime best bet is to use apcupsd for Mac - it isn't ideal but it works - RTFM. 
    The latest iteration is available on http://sourceforge.net/projects/apcupsd/files/osx-binaries%20-%20Stable/3.14.11/
    Cheers!

  • After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

    After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

    Hello, chocotac0.  
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    Cheers,
    Jason H.

  • LR 4 on OSX 10.8 does not recognize iPhone

    Ever since upgrading my Macbook Pro to 10.8 LR 4 does not recognize my iPhone 4 (iOS 5.1.1) on the import menue.
    No problem with iTunes, same problem with iPhoto. Help anyone?
    Gabriel

    Just saw your reply. I am not sure what you are suggesting.
    I have the following in my Mac Harddrive/Library/Image Capture/Devices folder:
    Canon IJScanner2
    Canon IJScanner4
    EPSON Scanner
    HP M1130_M1210 Scanner
    However, the icon for the last mentioned is different. It does not have the Image Capture icon. It simply has the generic application icon (two white papers with an "A" formed out of a ruler, a pencil and a brush). I doubt that the icon makes a difference, but it is what I observe.
    The permissions for the first three and the last are identical.
    The file sizes for all the files are in the same size range (except for EPSON, which is much bigger).
    I should reiterate that I am using the Lion version drivers on Mavericks (just upgraded from Mountain Lion yesterday). Those are the newest drivers for this MFP.

  • Mountian Lion does not recognize Yosemite in Start up disk

    Greetings All,
    I recently installed Yosemite on the partition of my HD (1TB) I ran Mavericks on.
    On another partition of the same HD I run Mountian Lion (I use Pro Tools 9.06 on it).
    When working within Mountain Lion, I used to switch to Mavericks (and vice versa) via System Preferences / Start up disk. Now Mountain Lion apparently does not recognize Yosemite as a bootable disk: in System Preferences / Start up disk Yosemite does not appear (as Mavericks used to do).
    Does anyone know what's the cause of Yosemite not being available as Start up disk in System Preferences in Mountain Lion?
    Kind regards,
    Gerrit
    MacBook Pro mid 2010
    2.4 dual core intel cpu
    1 TB HD; 3 partitions: Mountain Lion; Yosemite; Data
    8 GB RAM

    gerritfromnijmegen wrote:
    ...Another thing is a language issue: what you call the "media" line I can't translate with accuracy into Dutch. I guess it is called "Naam" (Name) in the second line of the information panel in Disk Utility and this says: Volume. I'm adding a screenshot here, maybe you'll be able to make out what what is by the way subjects are ordered in it?...
    Your hard disk drive is shown divided up into three partitions: Mountain Lion, Yosemite, and the Data partition, all of which are indented in the list on the left in Disk Utility. The "media" on which the partitions exist (your Western Digital hard drive device, which is not indented), is shown in the traditional configuration we've known for years (so I apologize for introducing "Logical Volume Groups" to the discussion). It's been my experience that sometimes, installation of Yosemite will take the partition arrangement you have and convert it into a Logical Volume Group which becomes much more difficult to work with, and much, much more difficult to explain.

  • Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

    Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

    Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
    God bless. Thanks again.

  • Image Capture does not recognize my CanoScan LiDE 700F after downloading pix via iPhoto.

    My scanner was working fine. I downloaded some photos using iPhoto. My computer now does not recognize my scanner when I use ImageCapture. I think this happened once before but I can't remember how I remedied the situation. In researching the scanner before purchase, I discovered many reviews that indicated "don't download the software; it doesn't work: just use ImageCapture. That has worked well....until now. Any suggestions?

    Try resetting the printing system. It can also affect the scanner.
    OS X Mavericks: Reset the printing system
    You can also check for drivers here.
    Gimp - Print
    HPIJS for Mac OS X

  • New Macbook does not recognize Time Capsule backup from old macbook

    I just purchased a late 2013 13" macbook pro. I have a mid 2009 macbook pro running Mavericks. The new macbook will not recognize the time capsule backup from my old macbook. I am trying to migrate all data over, but the new mac does not ever acknowledge the external drive that contains the backup. I've tried two different external drives with the same result each time. Both computers are running Mavericks.

    Do you see the drive in Disk Utility?
    If yes, run Repair Permissions then restart the drive.
    1. Open Disk Utility in your Applications/Utility folder.
    2. Click on the First Aid tab and select Repair Permissions
    3. Click on the icon for your boot volume.
    4. Click the repair permissions button.
    In System Preferences > Time Machine can you select the old Time Machine with Select Disk?

Maybe you are looking for

  • In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

    Dear , when i used FTP_R3_TO_SERVER to download data in FTP server  i checked in FTP server  file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .

  • How to fix ipad 2 when blue screen appears after dropping it sideways?

    I dropped my ipad 2 from my kitchen table to the seat of the wooden chair at the table. The ipad landed on it's side and now the screen is dark blue and I cannot see anything on it. I can hear the camera take pictures though. I tried a reset and even

  • 60i to 24p conversion problem-Compressor 3

    I'm trying to do a conversion from 29.97 interlaced footage to 23.976 progressive. The results look good but the clip comes out 125% of its original duration. I don't want slow motion. On the frame control page i activate the button that says: so sou

  • Error Installing QT 7.1 Over Old Version

    When we push out an installation of QT 7.1, it runs fine on machines that did not previously have any version of QT installed. However, if a machine had an older version, then the following error is generated when trying to run the new version: Fault

  • HT1414 Outlook Syncs but not music

    Here is a strange one. Have just upgraded my PC to Win 8.1.  I have iTunes, iPhone 4S and iPad both running latest versions. I get error message in iTunes saying "...  iphone cannot be synced.  You do not have enough access privilages for this operat