Maverks 10.9.4 lost some ICC profiles and cant download new Epson ICC

Just downloaded Maverks 10.9.4. and i can't print. reloaded epson 3880 print driver But I am unable to download the ICC profiles that seem to have gone missing. I want my ICC hot press natural BACK...help. Is it me or is it that Maverks thing???

Do you have Time Machine enabled and have backups made before you upgraded to Mavericks? If so do the following;
1 - enter Time Machine.
2 - go to the HD/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles folder.
3 - go back in time till just before you upgraded to Mavericks.
4 - select all of the profiles in that folder (there were 176 in my folder) and click on the Restore button.
5 - have them replace any existing profiles in that folder.
6 - launch Disk Utility and repair disk permissions.
7 - try to print again.

Similar Messages

HT3529 I lost some text messages and I want to get them back. I tried an iTunes backup, but I ended up losing even more messages.

I lost some text messages and I want to get them back. I tried an iTunes backup, but I ended up losing even more messages? Can they be recovered?

Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

Help! lost some of my contacts after the new update

help! lost some of my contacts after the new update

hi, i have the same problem, xept i get an error message that my video didn't sync because the ipod needs to be updated. it tells me to go to summary and hit update. the summary says that my ipod has update 1.1.2 and that that's the latest update. i would appreciate some help with this.

Invalid Page Fault Error Messages - ICC Profiles and Fonts

Possible causes of these error messages include bad ICC profiles and/or bad fonts. See below for corrective measures

Q: Message reads:
PHOTOSHP caused an invalid page fault in module
KERNEL32.DLL at 017f:bff7b9f5. Registers:
EAX=796692e0 CS=017f EIP=bff7b9f5 EFLGS=00210202 EBX=00d0fe28 SS=0187 ESP=00c10000...
A: You have an incompatible or corrupt ICC profile in your
Windows/System/Color folder (win 98/98SE/Me) or ./system32/spool/drivers/color (win2k).
Make a temporary folder, ICMs, under and move all the
ICM and ICC files to that folder.
Start PS and make sure it restarts OK.
Now move back JUST THE PROFILES YOU NEED to Windows\System\Color (win 98/98SE/Me) or ./system32/spool/drivers/color (win2k)
Also see: http://www.adobe.com/support/techdocs/1c4f6.htm

I downloaded icloud and lost most of my apps.I did restore didnt work.when i try to download app it asks for a usa zip code and i live in canada and cant download anything now

downloaded icloud after the download the apps some apps didnt work, tried again then lost most of my apps, now when i try to download apps at itunes it asks for my info when i fill in info it asks for zipcode which is USA and im in Canada and cant download anything. Also tried to restore and that did not work

To purchase and update apps, iTunes requires a valid payment method, even for free apps.
Yu can create a new iTunes App account that is only good for free apps but you still need the old account to update apps purchased wth that account.
Create an iTunes App Store account without a credit card

I lost an Iphone 5 and got a new one on the next day by mail but it still doesn't work, what I need to do to activate the phone?

I lost an Iphone 5 and got a new one on the next day by mail but it still doesn't work, what I need to do to activate the phone?

Let's ensure we get this new device up and running, 123Vika. I know the importance of having a functional device. I have some great news you can activate the device directly from My Verizon. Take a look; http://vz.to/1gdvahs
YosefT_VZW
Follow us on Twitter @VZWSupport

Palm Profile cannot sign in and cant create new palm profile!

Hello,
I am looking for help with my company Pre 2 EU Unlock Phone.
I am an HP Employee and i got my Pre 2 months ago, then i dont have any issue to create my palm profile - [email protected]
Few days ago I wipe my phone coz it was very slow and when i try to sign in i get an error - Sign In Failed.
Of course i check the site and everything looks fine. I delete the device under my profile coz i thought that cause any issue. And try to log on again - unsuccessfully
Then i try to create new profile and again nothing happen
I go to live chat and i have 3hours chat with support - again no success(Chat session ID:99825861). We try everything possible but its not working..
Ofcourse web chat rep try to explain me that the root cause is in my carrier which is not true because my card have 3G and its working perfectly.
Because when i type wrong password it said me password is wrong and i click on forgot password i select the secret question and change the password via the phone - which is a clear proof that Internet 3G is working!
Then i decide to downgrade to 2.0 - again cant login and cant create new profile, try with 2.01 again no success.
Now back on 2.1 with #*DEVMODE# everything is working i have signal and i can use the phone but i dont have app catalog and cant install apps because there is no Palm profile on the phone.
I try SDK tool and to find what is the app which start profile creation card with palm-launch but without success.
So i have few Question
- Do we(you) have a problem with WebOSProfile Services ?
- why i cant create new or login to my existent profile ?
- in DEVMODE how i can create palm profile (is that possible) and if it is how to do it ?
- what is the HP internal group which support this services and how i can contact you internaly ?
Looking for your reply because thats and urgent and i cant use my phone more than 3 days
Post relates to: Pre 2 p102ueu (Unlocked EU)
Post relates to: Pre 2 p102ueu (Unlocked EU)

Djumanta wrote:
Dear Friends
Please Help me !!
I try to upgrade my palm pre + and after that i cannot login to my palm profile
i have tried so many time and it keep rejected all the time
Please give me solution coz i cannot use my phone, i cannot make a call or anything before finish the palm profile login
i will appriciated your help
Post relates to: Pixi Plus p121vzw (Verizon)
What do you mean by "upgrade?" If you've installed some software version that isn't supported for your device, then you may have to use the WebOS Doctor to go back to a supported version.
If you've "upgraded" to a supported version, then this problem will require you call Palm/HP's support to find out why you can't sign into your profile.
HTH

How do I delete my old gamecenter profile and start a new one

How do I delete my old Gamecenter profile and start a new one?

I suggest changing the existing ID rather than creating a new one, all purchases are forever linked to the ID that bought and can never be transferred, you can change all detauils about your ID here:
http://appleid.apple.com
Read this
http://support.apple.com/kb/HT5621

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

ICC Profiles and Aperture 3

There has been some discussion about Snow Leopard not recognizing Version 4 ICC Profiles. Although I am working with Leopard (10.5.8) I am having printing problems, prints that look as though they aren't profiled or double profiled. My custom profiles are Version 4. Does Aperture 3 recognize Version 4 ICC Profiles, or only Version 2?

Nevr mind. I built a version 2 profile and got the same bad results.

ICC Profiles and PSE3.0 - How to Needed?

I recently bought a monitor calibrator, and I am quite satisfied that what I see on the monitor is the way I should be seeing it. I've printed a few prints with my Canon Pixma 4000, and the prints are almost exactly the same as what I see on the monitor. So, as far as using my printer, I am pretty satisfied with the workflow/color management.
As a test, I sent a photo to Adorama, and I chose to use no ICC profile or color correction. I just picked up the print from them, and it is noticeably different from my other prints and the monitor. Basically, it appears to be darker, which of course renders the colors slightly different shades and the saturation different than what I started with. It is a nice print, but not true to my original.
So, I assume the missing ingredient was the ICC Profiles I could have downloaded from them; a different one for each of their paper choices. Please help me understand when I embed this profile in my workflow, and how it works. Can I do this at all in PSE 3.0?
Does it get embeded early in the process, in which case what I see on the screen is different than if I didn't use a profile; or, is it embeded in the end of the process, and only used as a set of instructions for their printer?
I think I'm oh so close to understanding this process.

Steven,
Most photo labs are set up to process sRGB images, NOT Adobe RGB images. In
fact, most commercial printers either do not read embedded profiles or
ignore them.
If you are going to send an image to a commercial printer without using the
labs custom icc profiles you should be working in sRGB and send them an
sRGB image. If you do want to use the labs custom icc profiles, you must
have software that can convert the image to the selected profile. Elements
cannot do that.
I'm going to give you a link to Dry Creek Photo
(http://www.drycreekphoto.com/icc/using_printer_profiles.htm) that has some
pointers for using custom profiles with commercial labs. Especially read
the info at the bottom under "Example color managed editing and printing
workflow". They also have pointers to some utilities that can do the
conversion.
Dry Creek Photo creates custom profiles for commercial printers and, in
fact, lists Adorama in their profile database. Here's the entry:
a.. "Adorama Pro-Lab Inc.: 42 West 18th St., New York, NY 10011 Phone:
888-216-6400
a.. Store info: Noritsu 34-Pro, Kodak papers.
b.. Royal Glossy paper profile, June 26, 2006
c.. Endura Lustre paper profile, June 26, 2006
d.. Royal Matte paper profile, June 26, 2006
e.. Mac OS 9 format version (both profiles) See usage note.
f.. Note: This printer uses our enhanced accuracy custom profiles.
g.. Note: Adorama has multiple printers. Specify that your profiled
prints run on the Noritsu 34-Pro.
h.. For more information, please contact Adorama Pro-Lab "
Using custom profiles or not using them and using just sRGB should only make
subtle differences. Gross changes would suggest that you have something
wrong in your settings and/or calibration. You have a calibration device,
which is good, but what are your Elements color settings? While you can
never get a perfect match between monitor and print, you should be able to
get a reasonable and consistant match. It's also possible that Adorama is
doing something that's affecting the print. If you are sending an sRGB
image that views ok on your system using something other than Elements and
it comes back from Adorama significantly different, it could be on their
side.
Bob

ICC Profiles and Photoshop Elements 10

Photoshop Elements 10 will not bring up any of the ICC Profiles downloaded for my Epson Stylus 1280. I have photos of the PSE Screen shot showing paper types "NONE" under change settings. And under Printer Settings: Paper Type shows "UNKNOWN".
Whats going on with my PSE 10 and RR ICC Profiles?

Hi ,
go to C:\Windows\System32\spool\drivers\color
and copy icc profiles to C:\Program Files\Common Files\Adobe\Color\Profiles
Mac- \Users\Library\ColorSync\Profiles folder
By this PSE will show the list of icc profiles.

Canon ICC profiles and color printing issues

I use two Canon printers -- an all-purpose MP460 and a iP4000 for photos.
I use Canon's Photo Paper Plus Glossy II paper and Canon inks.
I print with color management off in the "Print Settings" and by selecting the ICC profile from the drop down in the Aperture print window.
Since updating to Snow Leopard, the MP460 prints images that are consistently dark using the "SP" ICC profiles.
The iP4000 has an issue in that it prints images from Aperture with magenta cast in areas of yellow to orange tones.
I have had prints made through online services that have come back accurate, so I am wondering . . . is this a Canon profile or driver issue? I haven't tried printing from Photoshop or Photoshop Elements as of yet.
Any suggestions?
It is very, very frustrating since prints from these printers were fine before Snow Leopard.

I have a Canon IP5200 and had numerous problems with Aperture printing from OS X10.6.2.
In November Canon came out with new print drivers. With SNL 10.6.2 update and new canon drivers my prints come out pretty well using canon's ICC profiles. I use the PR3 canon ICC with Costco (Kirkland) paper and am pleased with the results. Hope that helps

How to use ICC profiles and soft proofing profiles?

Hi,
I got an Epson Stylus Pro 3880 and Epson Hot Press paper which, upon investigation, received great profeesional reviews and, having never printed digitally before, I don't know how to use profiles for soft proofing or printing.
I don't know where to go in Aperture or what to do. My driver is up to date and I downloaded the paper profile - not sure where it ended up. What's next?
So far as I know, soft proofing is about calibrating the monitor to the paper - am I correct?
Thanks guys,
Raphael

Raphael,
A good reply is going to require a full-size keyboard, which I don't have access to just now. Here are some starter pages:
http://www.cambridgeincolour.com/tutorials/soft-proofing.htm
http://www.luminous-landscape.com/tutorials/soft-proofing.shtml (a bit grumpy and out-dated)
Fwiw, I print to Epson Hot Press using a 3880. Imho, it's a _great_ printer, and that combination of printer and paper produced state-of-the-art results. (Not suitable in all cases, but if that is a look you like, the only thing that I've seen that surpasses it is the Epson 9900, and without looking at prints side by side you can not tell them apart.)
Your profile ended up wherever you have told your browser to save downloaded files. The Epson site should provide instructions on where to move the file. Once it is in the right Finder folder, when you next Aperture it should show in your list of profiles.
Keep in mind, though, that soft-proofing is useless without a well (read: hardware-calibrated) calibrated display.
HTH,
--Kirby.
(Sent from my magic glass.)

Icc profiles and 10.4.3

Hi! I just bought the highly praised Epson Photo R2400 printer. This was my choice most of all because I´m into b&w photography - also as a professional. My problem seems to be getting the icc profiles for different papers to work properly with the printer driver and printing features in Photoshop CS2.
However many profiles I install in the ColorSync-Profiles folder, not more than the four originals will turn up as choices in the driver dialogue. Can anyone help, please? I already got rid of the R1800 ...

Hi, and thanks for your comment!
The lack of matte paper alternatives in the driver obviously solves itself by exchanging the Photo Black ink for the Matte Black.
Still my print´s quality haven´t improved much. Still working and testing. I´m told everybody else are satisfied, even HAPPY, so I guess I´m the stupid guy.
Yours
leif e
(giving up on Epson soon)
G5 2x2,0 GB & PowerBook G4 667 Mac OS X (10.4.3)

Maverks 10.9.4 lost some ICC profiles and cant download new Epson ICC

Similar Messages

Maybe you are looking for