Mavricks issues with Logic 9.1.8 and multiple dislays

I have graphical glitches every time i move my mouse from one monitor to the other. It seems to be an issue with the new way Mavricks works for adding wireless monitors and I can't turn its smart displays option off to rectify and revert to the way things were in previois versions od the O.S
A good example of this would be when i select my mixer on the right monitor then move to the left to adjust an EQ or filter.
Once i have adjusted the EQ/ filter it takes up to 5 seconds to respond graphically and audibly. somtimes it even locks play and pressing space bar has no effect at all. I never had this issue with Mountain lion and my machine is more than cpable of runningthe software as the CPU is not even over 1/5 cpacity. I also have 8GB ram so thats not the issue either.
Can anyone help am i doing somthing extrelemy stupid or just have bad luck? I'm really trying to avoid the "just get Logic X" option as many of my plugins wont work in 64 bit!
responses welcome
Mac pro 2x 3ghz quad core 8 gb ram
max

I'm having the exact same issue with the Multipressor in Logic (but not in Waveburner). What gives?

Similar Messages

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Metronome click issue with Logic 8

Hello.
I'm having a strange issue with Logic 8 where the first click after hitting play or record is lower in volume than the rest of the clicks and sometimes isn't there at all - every subsequent click sounds fine. I have checked the metronome preferences and made sure the bar click is the same velocity as the beat click. I've double checked my entire configuration to see if there is a problem somewhere and everything seems to be right. I figured this might be just a bug but I wanted to post this to make sure.
Any ideas on how to fix this?
Here is the configuration I'm working with which has all the latest drivers and updates:
Mac Pro 3.2 GHz 8-core Intel
Mac OS 10.5.2
14 GB RAM
Logic Pro 8
Apogee Ensemble
Trilogy with the Intel wrapper (this might be pertinent)

You need to add more RAM.

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Correct binding order in a Cluster with logical switches, NIC teams, and vNICs on the host.

I have seen many recommendations to set the network binding order on you Hyper-V hosts to something similar to:
Management NIC
Cluster NICs
iSCSI NICS
However, all of these recommendations are for scenarios where the NICs are all physical NICs in the host.
Using Server 2012 R2, I am building converged networks with logical switches, NIC Teams, and vNICs on the host. So when I go set the network binding order, I now have all these components to deal with as well. For example, on a 4 adapter blade,
I might typically have the following items in the binding order drop-down.
4 - physical NICs (2- teamed for the 1 virtual switch, the other 2 used for iSCSI)
1 - Team interface (Datacenter_Switch)
5 - vNICs (Management, Cluster, LiveMigration, iSCSI-1, iSCSI-2)
So, should you only worry about order of the vNICS (placed at the top) and let the other components just fall to the bottom of the list? This seems to be likely to me, since the binding order applies to service access to the resources, and the other
components are not being directly accessed by network services?
Or, should the order start out with the physical resources needed to access the vNICs, followed by any intermediate resources (switches or team interfaces, then the vNICS themselves, to ensure that the resources are available to the subcompnents accessing
them?
Any help would be appreciated.
Thanks.
-Tim Reid

If by 'network binding order' you mean the order set in the Advanced Settings of the Network Connections of the Control Panel, then the most important one is to make sure the domain network is at the top of the list. Whichever network is at the top
of the list is used first for auth functions. So auth functions perform best when the proper network is placed first in the binding order. After that, I don't know that it makes much difference at all. (If it does, I'm sure my statement will
start a lively discussion. <grin>)
. : | : . : | : . tim

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.
I am the music teacher in a Special school in London UK currently working with Drake Music who are a charity that go into schools to enable music making through music technology. Our purpose is to enable a group of 7 children who have profound and multiple learning difficulties to play instruments on the ipads or through the soundbeam and to be able to play and jam together with me underscoring on the guitar. We're having a lot of fun and we're all learning a lot about what can be achieved using the amazing ipad technology. If you're doing a similar project I'd love to hear from you and we can swap notes!

See Recover your iTunes library from your iPod or iOS device.
You can use iTunes to easily manage multiple devices by having each sync with selected playlists. I don't personally have any recommendations for other software but perhaps others might.
tt2

Mavricks issues with Logic 9.1.8 and multiple dislays

Similar Messages

Maybe you are looking for