MAX 7041/6040 export

Hello,
I got 2 PC with PCI 7041/6040E RT Target. I'd like to export tasks and channels of the 6040 with max from one PC and import it to the other.
But when i chose RT::1 (which is my 7041 RT device) in the export wizard, it doesn't show me channels and task for the 6040 on the 7041 target, it only show me the 6040 itself (for nce file, nothing for ini file) under RT::1, and others channels under System (which are linked to a 6534 DIO device).
I've got Labview and Labview RT 8.0.1 and DAQmx 8.1.
Does anyone have an idea on how to export this ?
Thanks

Hello Ludos,
Could you please be more explicit ?
I don't clearily understand what you are waiting for...
As far as I understand:
1/ you have two systems, each one have a 7041/6040 RT card.
2/ you want to copy your config (including tasks and channels) from your first system to the second one.
3/ When you copy your config on the second one, you don't see your previous tasks nor channels...
That's the idea, isn't it?
Regards,
BRAUD Jean-Philippe
Field Sales Engineer - Nord et Centre France
LabVIEW Certified Developper

Similar Messages

Does "cropping" a clip affect the max resolution it exports at?

This might be a silly question.
I have a project that's made up of a bunch of clips that were all shot in 1080p. I cropped one of them, by a little bit. When I export it, the whole movie appears in 720p. When I uploaded to YouTube, also, the max resolution was 720, not 1080.
Is it because I cropped one of the clips?
Thanks!!

Not tried it but could you make a 2.7k sequence and warp stabilise that, using stabilise only or stabilise and crop. Then add this sequence to the 1920x1080 sizing to suit.

Cpu use maxed out on export

working with a mac pro, 4 core 3 gig speed, 8 gigs ram, fcpx. I shot off a logitech webcam in quicktime, 5 gig file, imported to fcpx, exported thru a cpmpressor preset for vimeo, 720p. It took 5 hours to export and between 98% and 100% cpu.
something has got to be wrong, any suggestions?

Firstly I would expect the CPUs to be maxed out since FCP & Compressor are designed to use all the computing power available. As to the time, well it depends on so many parameters. An input movie in a compressed format that is 5GB quite big - I find a 15 min 1080p movie can take 40 min to export to file also on a 4-core Mac Pro 2013 and I would guess that yours must be at least an order of magnitude larger so I'm not sure that 5 hours is totally unreasonable, (especially if you are not doing background rendering). Some-else with more experience than I may be able to make a better judgement if you supply more details.
Geoff.

Rotation Problem on 3DS Max 7 Scene Export

We have been experiencing some anomalies with animations
exported from 3DS Max 7. We have a set of linked groups that are
animated along a path and some of the groups also have rotation
keys. The path animation is always fine, but the rotations will
sometimes stop short of their destination (even though the key
exists in Max and it plays properly in Max). If the object happens
to stop rotating before the timeline finishes, the object will
continue, very slowly, to rotate to it's final destination by the
end of the timeline.
Our animations are primariliy of vehicles, and most of the
problems occur with tractor-trailer vehicles where the trailer is
linked to the tractor - so on a turn the trailer never completely
straightens out. Any ideas?

Thanks, sws (sorry didn't catch your reply earlier)...
It's not so much my own learning how to control rotation of the object I'm concerned about (though I can't imagine ever coming to see this type as preferable!) but that a non-3d-literate recipient of my 3dpdf would be confronted with something they had no control over and simply not have the time or patience to persist with.
As to your saying other methods would make seeing the whole object difficult or impossible, I just don't see that. Looking at any of the Kaon examples shows how really simple - and intuitive - this can be.
Incidentally, I'm now wondering what are these other types of rotation you refer to? Other types within A3d? How can they be accessed?
EDIT: I'm thinking I maybe didn't describe the difficulty too well (always find it hard to put 3d transformation into words!). As you see, the Kaon objects do "turn on all 3 axes" but are "grounded" - ie as if attached to a fixed plane and do not simply drift around like an astronaut's toy!
Sorry can't explain better.
My thanks for your time...
Glenn

Getting MAX models to export with the textures?

Could someone offer some guidance on how to export a 3d model (say even a flat picture frame) with a bitmap (sunset.jpg) applied so it appears in Acro 3D? The mesh exports ok, but the bitmap is lost.
Cheers
Gazzzz

if you export from max to .ase format, make sure that in the ASCII Export diologue box that pops up when you save, you turn on "mapping coordinates" in the mesh options section, its in the lower left corner. Then open that in toolbox and the map will be there. and so you can go to acrobat 3D from there.

Maxing CPU during export

Okay. I admit I'm pretty new to video editing. I've spent the past year or so muddling through with VSDC doing as little editing work as possible because that program is as user-friendly as a bengal tiger with rabies. I bought Premiere Elements 13 so I could have a more stable, usable editing software that I could do more interesting stuff with.
Problem is, when I try and export a video it goes just fine for the first 8% or so but then it immediately redlines my CPU. I have no idea what's causing it. I'm trying to export in WMV 1920x1080 (custom made because apparently Elements doesn't like WMV in HD and it's the only type that keeps the file size from being ridiculous).
Specs:
Intel i5-3470 CPU 3.2GHz
16GB RAM
GTX 760 graphics card
500GB SSD
I really hope someone can help. I don't want to have to go back to VSDC.

Updated. Hadn't done that. I assumed it would download the most recent version automatically. Unfortunately it didn't solve the problem. Initial CPU usage dropped from 30% to about 28% but it just redlined at the same progress as before.
The SSD is the default C drive yes, and Premiere is installed on it. Operating system is Windows 8.1 (with classic shell, if it matters).
Estimated output file size is 537.81MB. Duration is 37min, 51.51sec. And I'm only exporting to hard drive.
I would look at the results of the export but that would require the process finishing. Twice, in fact. And since the estimated completion time is ever increasing (it was over an hour by around 17%, up from 20 minutes at the start), there's not much chance of me doing that unless absolutely necessary. It'd take up most of my day at the rate it was going.
As a test to see if it was something to do with the custom output format I tried in the Youtube HD format. That maxed out my CPU immediately but maintained estimated completion time of about 20 minutes. Not exactly an ideal solution though. I don't want to lock up my computer for the several hours it takes to export footage.
Thanks for your help in advance!

Export-csv output maximum row size

Hi all. May I know the maximum row size that can output to .csv using 'export-csv'??

There's no limit on writing to a CSV file.
You can try:
# max rows to export to CSV:
$i=0
While ($true) { #Forever
$i++
$i
"Some text" | Export-Csv -Path .\test12.csv -Append -NoTypeInformation
until you run out of disk space, which may take a while. A million lines using the above script makes a 5 BM file..
Now reading it back is an entirely different story. Try
Delimit..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

BUG: Indesign CC 2014 - significant image artifacts with 'export as JPG'

Issue
Spreads exported from InDesign as maximum quality JPGs have heavy artifacts not present in PDF's with equivalent image compression settings.
Steps
Export spread to JPG (max, baseline, 300ppi)
Export spread to PDF (image compression set to JPG, maximum)
Compare both files in Photoshop at 100%
Results
Maximum quality JPGs are significantly artifacted.
Expected Results
Maximum quality JPGs should be identical to PDF images with equivalent image compression settings (and should be virtually indistinguishable from original files sized equivalently in Photoshop (and saved via Photoshop's 'Save for Web').
Please Note
I'm very familiar with the limitations of JPG's in pre-press work. Please trust that I have legitimate reasons for needing InDesign to export spreads as JPGs with the same image quality as is possible when exporting as a PDF (or using Photoshop's 'Save For Web' function with the source file sized identically as the spread in question.)
Samples
exhibit A: spread exported as PDF (compression set to JPG, maximum quality)
exhibit B: spread exported as JPG (maximum quality)

Rob,
Thank you for running your test!
Since posting (and just before reading your reply), I discovered an additional constraint on replicating the issue:
–it only appears when the linked image has been upscaled* (in my example, 107.1%)
*keep in mind, the PDF was upscaled to the same degree, ruling out it being solely an upscaling issue
–testing at 'even-magnification' scales (i.e. 150%) simply resulted in increased pixelation compared to the same PDF export (see samples below)
–testing at 'odd-magnification' scales (i.e. 101%) generated random artifacts (like those visible in the samples of my initial post)
–as such, this is likely more of a resampling/aliasing issue than jpg-artifacting.
That is, it would seem that upscaled images seem to enjoy a higher-quality resampling method when exported as PDFs.
I'd be curious to see how your test fared with upscaled images.
samples
image scaled at 150%, exported as PDF (compression set to JPG, maximum quality)
image scaled at 150%, exported as JPG (maximum quality, anti-alias**)
**tested with & without anti-aliasing, results were identical

Interactive PDF buttons / icons, after export, turn to flat 'blocks'

Hi, I'm attempting to export an interactive PDF from CC with buttons that I've made from white vectors. For example, a Google+ icon linking to a Google+ page. Links work great in the PDF but it's turned my 'icons' to white blocks. I've tried using the max resolution in export settings but it doesn't help. Any ideas?

I found that icons must be a single item. Shapes must be welded / subtracted to only be one vector / shape before exporting to interactive PDF.

Exporting HD via iMovie 08

I just purchased a Canon HG20 HD video camera. I can import the "full HD" into iMovie but when I go to export the maximum resolution if gives me is 960x540.
I've done extensive research on the web and apparently you CAN export to higher resolutions if you select the "Quicktime" option, but that's not working either. The resulting movies are choppy and pixelated (possibly a setting I've missed).
Can someone point me in the direction to get full HD quality videos exported from iMovie '08? So far my videos are filmed at 1920x1080 but I can go to 720p if that's easier. I suppose it doesn't really matter unless I'm burning to BluRay anyway but still, I'd like to know!
Any help is appreciated.
Message was edited by: The_Grudge

The_Grudge wrote:
.. you CAN export to higher resolutions if you select the "Quicktime" option, but that's not working either. The resulting movies are choppy and pixelated (possibly a setting I've missed). ..
your imports are internally 1920/AppleIntermediate.. when you choose 'Export Movie', iM allows only 720p/'960' as max resolution.
'Export using Quicktime' and choosing manually AIC, interlaced, current framerate and 1920x1080 should export the 'native' quality (=no pixelation)
such a mov is huge and needs 'some' computation power.. (= no stutter).
how do you watch the final output/judge final quality?

PCI-7041 pid loop rate

Hello,
I have PCI-7041/6040 card with which I would like to perform single point PID control. I have looked at the DAQmx example PID control - single channel.vi to do this. The only thing I am unsure on how to do, is set the loop rate to a specific kHz value. Is this done by using the 'Input Rate' control and how could I verify that the loop is running deterministically and to the rate I have set?
thanks,
David

Hi David
You are correct that the "Input Rate" control will set the loop rate for the example that you are using. There are a few ways to determine if the loop is running deterministically.
One thing you can do is use the "DAQmx is Read or Write Late" VI. If the "is late?" output goes true, your loop is not keeping up with the specified hardware timed acquisition and generation.
Another recommended method to determine if your loop is running determinisitically is to benchmark it using the TimeStamp VI's.
There is a great example in the LabVIEW Example Finder that you can use for this. From the Example Finder, go to
Tookits and Modules >> Real-Time >> Timing >> NI Timestamp Code Timer.
You can combine your PID example code with this example to determine how long it takes for your PID code to execute when running on the real-time target. Just place the code you wish to benchmark in sequence 0 of the sequence structure of the Timestamp Code Timer example VI. This VI will give you some great information including average execution time and maximum jitter.

VNI-2015 GONE - STILL CAN'T EXPORT

I've gone thru the problem of "Logon as Batch" problem, now when running export on NT 40 with oracle 8.1.6 (personal), during export i receive, HOME/oradata/EXPORT.LOG not found. Then when I tell the wizard don't bother with EXPORT.LOG, i get the same error for some damn work file.....thanks in advance, I would like to backup work in progress without doing one huge xcopy.
[email protected]
[email protected]
null

Hi Penny,
I can answer one of your questions (unfortunately it does not tell how
to solve the problem, but at least it gives a bit of guidance).
>We are wondering if NI-Max is supposed to support the CRIO-9002 for File->Export.
No, there is no configuration in NI-MAX to be exported for a cRIO-9002 controller.
Seems that the problem is lying in how the executable/installer will
get built into it information about the variables that the cRIO-9002
exports. My guess this is a "variable configuration" problem and not a
"hardware configuration" one, which is beyond my expertise.
JMota

Adding Memory RAM to System. Wich parameters needs to be changed ?

Hi,
My SO is Win 2003 x64.
I Have DEV and QAS system installed on to this server.
My server had 4GB of RAM.
Now has 8 GB of RAM.
Wich parameters do i need to change in RZ10 to adjust this new memory ?
Thanks.
On this link has to many information :
http://help.sap.com/saphelp_nw04/helpdata/en/02/962acd538111d1891b0000e8322f96/frameset.htm
I just wan to change a few parameters.

Hi,
Here you go!!
Buffer Settings
Parameters     Description     Recommended value
abap/buffersize     Program buffer size     400000
rsdb/ntab/entrycount     Number of nametab entries administrated     30000
rsdb/ntab/ftabsize     Data area size for field description buffer     60000
rsdb/ntab/sntabsize     Data area size for short NTAB buffer     2500
rsdb/ntab/irbdsize     Data area size for initial records buffer     8000
rtbb/max_tables     directory entries in the single record buffer     2000
rtbb/buffer_length     Size of single record table buffers     60000
rsdb/cua/buffersize     CUA Buffer Size     10000
zcsa/table_buffer_area     Size of generic table buffer     100000000
zcsa/db_max_buftab     Directory entries in generic table buffer     10000
zcsa/presentation_buffer_area     Size of the buffer allocated for screens     10000000
sap/bufdir_entries     Maximum number of entries in the presentation buffer     10000
nobuf/max_no_buffer_entries     Number range buffer size     1000
rsdb/obj/buffersize     Size of export/import buffer     80000
rsdb/obj/max_objects     Max. no. of exporting/importing objects     20000
rsdb/otr/buffersize_kb     Size of OTR buffer     4096
rsdb/esm/buffersize_kb     Size of exp/imp SHM buffer     40000
rsdb/esm/max_objects     Max. number of objects in the buffer.     10000
PhysMem Size = 60% of 8GB=     ~5GB (Ensure to delete Ztta/, abap/heap and rdisp/* parameters which are dependent on ZAMM). Ensure 3GB is set.
Database: SQL/Oracle= 40 or 30% of Total RAM
rdisp/ROLL_SHM     Roll buffer size in shared memory     32768
rdisp/ROLL_MAXFS     Maximum size of roll file     32768
rdisp/PG_SHM     Paging buffer size in shared memory     16384
rdisp/PG_MAXFS     Maximum size of ABAP/4 paging file.     32768
You can see some SAP Notes also.

Sony EX XDCAM from FCP MAC cannot be recognized by PC

Not sure if this is a quick fix, but my CGI guy - who works by remote - cannot get his PC to recognize my XDCAM EX 108024p clips from my MAC - which I have exported as MXFs using the SONY XDCAM export option in Export>using qt conversion. I sent him the link to the driver, and he said it installed fine - but still his computer was not recognizing the MXF file. Does he need a program to convert?
Basically, I am looking for a lossless way to give him my Sony EX1 files that he can work with on his PC (in studio max) and then export to a lossless format that I don't have to render in FCP.
Any tips or suggestions most welcome. This is my first time editing a program with EX 1 files in FCP.

I'm using the Sony XDCAM transfer 2.5.1 to bring in the clips from card into FCP. The clip browser I downloaded yesterday and I tried to get it to recognize an MXF file that I had exported from FCP using the sony xdcam plug-in (but it did not). I guess I can only use the MP4s to convert to MXF? Is there a difference going from FCP compared to Clip Browser? I want to be able to export cut sequences so that the CGI guy can composite...
Message was edited by: thecuz

ST22 Short Dump STORAGE_PARAMETERS_WRONG_SET

Hi
We have a NW04 BW 350 system running on Windows 2003 32 Bit/MS SQL 2000 32 Bit.
When I go into RSA --> Monitoring --> PSA it says 'constructing administrators workbench' then fails with the short dump:
<b>STORAGE_PARAMETERS_WRONG_SET</b>
The shortdump reccommends increasing parameters abap/heap_area_dia and
abap/heap_area_nondia, I would have thought you would want to avoid using HEAP memory as this locks the memory into a single work process ?
Looking at the memory consumption in the shortdump :
<b>Memory usage.............
Roll..................... 1709536
EM....................... 108964960
Heap..................... 406948064
Page..................... 57344
MM Used.................. 495709152
MM Free.................. 17059832
SAP Release.............. "640"</b>
EM has only been used for about 100 MB, then it go's to HEAP memory.
Looking at ST02 the system has 4GB EM and only 1.7GB used at 42%, so why would the process only use 100 MB of EM?
ztta/roll_extension is set to default 2GB so it appears EM memory should be utilised more by the work process before going to HEAP memory.
What parameters affect the usage of EM before entering HEAP usage?
Thanks for any advice.

Dear friend
kindly see the folowing rsdb/ntab/entrycount     Number of nametab entries administrated     20000     30000
rsdb/ntab/ftabsize     Data area size for field description buffer     30000     60000
rsdb/ntab/irbdsize     Data area size for initial records buffer     6000     8000
rtbb/buffer_length     Size of single record table buffers     16383     60000
zcsa/table_buffer_area     Size of generic table buffer     64000000     120000000
zcsa/db_max_buftab     Directory entries in generic table buffer     5000     30000
zcsa/presentation_buffer_area     Size of the buffer allocated for screens     4400000     20000000
sap/bufdir_entries     Maximum number of entries in the presentation buffer     2000     10000
rsdb/obj/buffersize     Size of export/import buffer     4096     40000
rsdb/obj/max_objects     Max. no. of exporting/importing objects     2000     20000
Parameters     Description     Current value     Recommended value
em/initial_size_MB     Size of extended memory pool     4096     8192
em/global_area_MB     Size of SAP Extended Global Memory (see SAP Note 329021)     96     255
ztta/roll_area     Maximum roll area per user context     3000000     16773120
rdisp/PG_SHM     Paging buffer size in shared memory     8192     32768
Parameters     Description     Current value     Recommended value
rdisp/wp_ca_blk_no     Work process communication blocks     300     1000
rdisp/appc_ca_blk_no     Buffer size for CPI-C communications     100     2000
gw/max_conn     Max. number of active connections     500     2000
rdisp/tm_max_no     Max. number of entries in array tm_adm     200     2000
rdisp/max_comm_entries     Max. number of communication entries     500     2000
gw/max_overflow_size     Max. swap space for CPIC-requests in the gateway     5000000     100000000
gw/max_sys     Max. number of connected clients     300     1000
shailesh

MAX 7041/6040 export

Similar Messages

Maybe you are looking for