Max. amount of nodes in feature SCHKZ in ERP2004/2005

Hello,
I'm utilizing feature SCHKZ for IT0007. The structure is like
field WERKS
(10001, 10002, 1003, etc.)
--> PERSK
      (if 10 then NORM or else then STAN)
So there are two levels and no includes, just "simple" fields and return values.
My concern is that the SAP Help states that the amount of nodes is 36 and the requirement for amount of WERKS is far more.
However, I have carried out experiment with more than 36 WERKS values and the consistency check accepted the structure. I cannot now find anywhere an answer, which is the maximum amount of different values for the field WERKS and PERSK (for one WERKS).
Does the number 36 stated in the Help refers to the amount depencies; i.e. 36 different fields depending on each other?
Best regards,
Pipsa

Hello,
Unfortunately I cannot use that technique since not all the values for the field (or node) WERKS have been entered in the system. Even though all the existing values would work, there can be problems during future implementations and we do not want to create a new logic and feature from the scratch. Besides, I do not know how I could find out how much ABAP lines adding one WERKS field with its return values would create. Can you please elaborate you answer for that part.
Thank you and best regards,
Pipsa

Similar Messages

  • Is there a max amount of calenders in ical?

    Im currently organizing my schedule and creating new calendars for different things. I've created 10 calendars and it won't allow me to create any more. Is their a max amount of calenders in ical? If not, how do i fix the problem

    sbrotherhood,
    The only document that I know of which describes calendar limits is: iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks.
    What happens when you attempt to create more than 10?
    What names are you attempting to use?
    Are the calendars being created "On My Mac?"

  • Can you assign a max amount to Journals?

    Does anyone know if you can set a Max Amount to Journal entries?
    If so, can you take it one step further and limit the amount each user can journal?
    Thanks,
    Mike

    No you cannot do that in the journal module or on posting.
    You can only use validation rules (or logic by crossposting a value to some acocunt if a journal goes over a certain value) to for instance check and fail validation rules if journals (based on datasource for instance) are over a certain value.
    Just some thoughts,
    Edwin van Geel
    SAP EMEA

  • How to create new node in feature

    Dear Members,
    Culd any one help me out .........
    How to create new node in features..
    Example:  NUMKR
    On defaulting which option to select to create new node?
    Return value
    field for decision operation
    sub feature
    programme
    debugging operation
    error operation
    comment
    How to proceed................????????????

    hi,
    Where you can select the option field for decision operation then select the filed which you want like personal area, subarea, employee group and subgroup.
    and then select the node and then goto create and assign the return value by selecting the option ' Return value'.
    NUMKR -> FILED - PERSKGemployee group)  -> field PERSK(employee sub group) and --> return value.
    thanks,
    Vasu.

  • What is the max amount of articles in Adobe DPS?

    What is the max amount of articles in Adobe DPS.

    Maximum Memory
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMMs

  • What is the max amount of ram can I put in my Macbook Pro (2010 Model)?

    I was wondering what is the max amount of ram can I put in my Macbook Pro?
    Here is some specs of my macbook pro:
    Version: 10.7.4 (Lion)
    Processor: 2.66 Ghz Intel Core i7
    Memory: 4 GB 1067 Mhz DDR3
    Also I bought my macbook pro in 2010 when I had Snow Lepoard on it.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • My brother forgot his passcode then his ipod disabled after trying the max amount of times. How do I fix it for him?

    I need to know how to fix my brothers ipod touch 3. he used the max amount of times putting in the passcode and it disabled his ipod.

    Start it in DFU mode, connect it to your compter and restore it using iTunes

  • What is the max amount of RAM that I can install using Snow Leopard?

    What is the max amount of RAM I can install in my MacBook Pro? Does having Snow Leopard raise the RAM limit?

    Michael Velasquez II wrote:
    Despite only being able to read 3GB, what is the better way to go?
    qty(1) 2GB and qty(1) 1GB Stick
    or
    (2) 2GB sticks?
    In general, for best performance, it's best to match up the same size modules in each slot (2x2 in this case). However, given that it's only going to read 3GB, I'm not sure if that holds true here.

  • 5508 WLC - Max amount of AP's it supports

    Cant seem to find any info on this, but what is
    the max amount of AP's one 5508 WLC can support ?
    Cheers
    dave

    As per mentioned link here it is the information:
    Table 3. Ordering Information for Cisco 5500 Series Wireless Controllers
    Part Number
    Product Name
    SMARTnet 8x5xNBD
    AIR-CT5508-12-K9
    5500 Series Wireless Controller for up to 12 Cisco access points
    CON-SNT-CT0812
    AIR-CT5508-25-K9
    5500 Series Wireless Controller for up to 25 Cisco access points
    CON-SNT-CT0825
    AIR-CT5508-50-K9
    5500 Series Wireless Controller for up to 50 Cisco access points
    CON-SNT-CT0850
    AIR-CT5508-100-K9
    5500 Series Wireless Controller for up to 100 Cisco access points
    CON-SNT-CT08100
    AIR-CT5508-250-K9
    5500 Series Wireless Controller for up to 250 Cisco access points
    CON-SNT-CT08250
    AIR-CT5508-500-K9
    5500 Series Wireless Controller for up to 500 Cisco access points
    CON-SNT-CT08500

  • MAX. CPU/NODES ON RAC

    I just had one of our System Architects ask,
    What are the MAXIMUM number of nodes and MAXIMUM number of cpu per node that we can put on Oracle 10g 64bit RAC on SUN Solaris (latest or future version).
    Any feedback (theoretical, sales, technical, etc.) would be helpful.

    Max Number of Nodes: I think the maximum number of nodes supported by oracle or tested by oracle is 100. Of course, there would be a much lower limit if you are using any other vendor cluster software.
    Max number of cpus - I don't think Oracle has any limits on this as far as your OS supports, Oracle should be able to make use of it....again it is limited by your OS.

  • IPhone 5, Max Amount of Rintones?

    Okay before anyone starts, I searched the subject and only found "how to make ringtones?", "how to download ringtones?", etc.... My question is there a maximum amount of ringtones one could have on an iPhone 5 w/ios6? I had a bunch when I first got it. Then I made a few more lastnight and tried to install it. In doing so, I lost a few that I had before, and some didn't get installed. I tried syncing in different modes, "all tones" and "only checked". Whatever the case, I lose a few and gain a few. So again, is there a max amount of ringtones I could store on this phone.  At this moment I have 21 custom ringtones with a size of just 13.3 MB and all the stock ringtones. I remember I had more on my 3GS w/ios3.0.  Just to clarify, I checked my now inactive 3GS w/ios6. I have a similar problem, but the strange part is, the same ringtones are not loaded.  It seems to just sync a random few. So are these phones set up to allow only a certain size/amount of ringtones?  If so, what is the magic number?  I have posted this question on another forum, but didn't get any real data/answers.

    I had to break down and call the Apple customer support.  It turns out, the problem I had was with iTunes.  For some reason, I had to remove my library and reinstall.  A pain in the ***, but it finally works.

  • Low value asset max.amount exceeded

    Hi all,
    When doing a full settlement in CJ88, I am getting the following error: 'Low value asset max.amount exceeded. No posting allowed'. When I have defined a new asset class, I have copied from a LVA class. The new asset class is not an LVA asset class, therefore there is no limitation. Then, why am I getting the above error?
    Please help.
    Thanks,
    Nas

    ok

  • HT4859 I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    adkennon wrote:
    And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
    I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
    The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
    And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

  • Low Value Asset max. amount exceeded. No Posting Allowed.

    Dear All,
    We are prchasing items under low asset value asset. where low asset value is limit - 5000.
    Now  system shown the error mseeage "Low Value Asset Max Amount exceeded. No Posting Allowed." at the time MIRO tcode.
    PO - 41311*****************
    GRN - 51000***************
    Asset Items -     2 same items - value (4800 of each)
    Please anyone give the reply

    Hi Aman,
    DId you create your asset when you created your Purchase Order?
    Did you create 1 asset or 2?
    Are you trying to enter both assets in the same line in the MIRO invoice?

  • Max amount of ram

    What is the max amount of ram, which the hp g72 b15sa laptop can support?
    On the hp website it says 4GB max, 2GB per slot. But on a review about this laptop, it says the hp g72 b15sa can support 8GB max, 4GB per slot. Which one is correct?
    laptop make and model: Hp G72 B15SA
    operating system: Windows 7 64bit
    This question was solved.
    View Solution.

    This is from the Service Manual:
    Supports up to 8 GB of system memory √ √
    Supports the following configurations:
    ● 4096 MB (2048 MB × 2) √ √
    ● 3072 MB (1024 MB × 1 + 2048 MB × 1) √ √
    ● 2048 MB (2048 MB × 1) √ √
    ● 2048 MB (1024 MB × 2) √ √
    ● 1024 MB (1024 MB × 1) √ √
    The checkmarks are for the discrete graphics and UMA graphics model (which you have), so yours can take 8 gigs. HP just does not sell the G72 in any version with 8 gigs. At the low prices I have seen recently I can think of no excuse not to install 8 gigs. Just do not expect a lot of noticeable difference over 4 gigs.

Maybe you are looking for

  • Decimal places in database

    Hi all, Please can you make B1 do all calculations and store all data in the database to the maximum number of decimal places, and then let users pick to how many decimal places to view on screen? At the moment, if I only pick 2 decimal places, the d

  • Use of Xerces Parser in out application with Oracle App Server 9.0.4

    The problem in brief: Our product is a web-app that runs under various Application servers. One of our customers who uses Oracle App server, recently upgraded from 9.0.2 (9g) to 9.0.4 (10g), and our product no longer works with the latter version. Ou

  • Osx 10.7.5 timemachine error qnap

    I have a error when timemachine run backup: 28.12.13 10:31:35.924 com.apple.backupd: Error -36 applying backup protections to /Volumes/Backup di Time Machine/Backups.backupdb/iMacxxxxxxxxxxx 28.12.13 10:31:35.924 com.apple.backupd: Error: (5) setxatt

  • What Exactly is upgradable in a iMac 7,1

    This computer has been in the family for a while. I was wondering What can be upgraded? I know The ram And ive seen a few videos on hard drive upgrades Not to sure on the ram speed. And can i just pick out any hard drive or does it have to meet some

  • External services in MM

    Hi All, Is there any standard content available for external services, I have checked out all the node there I could found only customer services. But here they want like external services i.e., like Tendering/purchasing details for painting a buildi