Max amount of recipients in to: entry

Hi
Is there a maximum amount of recipients in the to:entry that oes is accepting?
Or maybe a maximum lenth?
Regards
Christian Bretting

"Maximum number of recipients allowed in an envelope" is a parameter of the SMTP_IN process that controls the number RCTP TO: entries in the SMTP header. For the message header, then you might hit a text limit of 4000 char on the internal storage of the To: string.
Paul

Similar Messages

  • Can you assign a max amount to Journals?

    Does anyone know if you can set a Max Amount to Journal entries?
    If so, can you take it one step further and limit the amount each user can journal?
    Thanks,
    Mike

    No you cannot do that in the journal module or on posting.
    You can only use validation rules (or logic by crossposting a value to some acocunt if a journal goes over a certain value) to for instance check and fail validation rules if journals (based on datasource for instance) are over a certain value.
    Just some thoughts,
    Edwin van Geel
    SAP EMEA

  • Is there a max amount of calenders in ical?

    Im currently organizing my schedule and creating new calendars for different things. I've created 10 calendars and it won't allow me to create any more. Is their a max amount of calenders in ical? If not, how do i fix the problem

    sbrotherhood,
    The only document that I know of which describes calendar limits is: iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks.
    What happens when you attempt to create more than 10?
    What names are you attempting to use?
    Are the calendars being created "On My Mac?"

  • What is the max amount of articles in Adobe DPS?

    What is the max amount of articles in Adobe DPS.

    Maximum Memory
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMMs

  • What is the max amount of ram can I put in my Macbook Pro (2010 Model)?

    I was wondering what is the max amount of ram can I put in my Macbook Pro?
    Here is some specs of my macbook pro:
    Version: 10.7.4 (Lion)
    Processor: 2.66 Ghz Intel Core i7
    Memory: 4 GB 1067 Mhz DDR3
    Also I bought my macbook pro in 2010 when I had Snow Lepoard on it.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • My brother forgot his passcode then his ipod disabled after trying the max amount of times. How do I fix it for him?

    I need to know how to fix my brothers ipod touch 3. he used the max amount of times putting in the passcode and it disabled his ipod.

    Start it in DFU mode, connect it to your compter and restore it using iTunes

  • What is the max amount of RAM that I can install using Snow Leopard?

    What is the max amount of RAM I can install in my MacBook Pro? Does having Snow Leopard raise the RAM limit?

    Michael Velasquez II wrote:
    Despite only being able to read 3GB, what is the better way to go?
    qty(1) 2GB and qty(1) 1GB Stick
    or
    (2) 2GB sticks?
    In general, for best performance, it's best to match up the same size modules in each slot (2x2 in this case). However, given that it's only going to read 3GB, I'm not sure if that holds true here.

  • 5508 WLC - Max amount of AP's it supports

    Cant seem to find any info on this, but what is
    the max amount of AP's one 5508 WLC can support ?
    Cheers
    dave

    As per mentioned link here it is the information:
    Table 3. Ordering Information for Cisco 5500 Series Wireless Controllers
    Part Number
    Product Name
    SMARTnet 8x5xNBD
    AIR-CT5508-12-K9
    5500 Series Wireless Controller for up to 12 Cisco access points
    CON-SNT-CT0812
    AIR-CT5508-25-K9
    5500 Series Wireless Controller for up to 25 Cisco access points
    CON-SNT-CT0825
    AIR-CT5508-50-K9
    5500 Series Wireless Controller for up to 50 Cisco access points
    CON-SNT-CT0850
    AIR-CT5508-100-K9
    5500 Series Wireless Controller for up to 100 Cisco access points
    CON-SNT-CT08100
    AIR-CT5508-250-K9
    5500 Series Wireless Controller for up to 250 Cisco access points
    CON-SNT-CT08250
    AIR-CT5508-500-K9
    5500 Series Wireless Controller for up to 500 Cisco access points
    CON-SNT-CT08500

  • IPhone 5, Max Amount of Rintones?

    Okay before anyone starts, I searched the subject and only found "how to make ringtones?", "how to download ringtones?", etc.... My question is there a maximum amount of ringtones one could have on an iPhone 5 w/ios6? I had a bunch when I first got it. Then I made a few more lastnight and tried to install it. In doing so, I lost a few that I had before, and some didn't get installed. I tried syncing in different modes, "all tones" and "only checked". Whatever the case, I lose a few and gain a few. So again, is there a max amount of ringtones I could store on this phone.  At this moment I have 21 custom ringtones with a size of just 13.3 MB and all the stock ringtones. I remember I had more on my 3GS w/ios3.0.  Just to clarify, I checked my now inactive 3GS w/ios6. I have a similar problem, but the strange part is, the same ringtones are not loaded.  It seems to just sync a random few. So are these phones set up to allow only a certain size/amount of ringtones?  If so, what is the magic number?  I have posted this question on another forum, but didn't get any real data/answers.

    I had to break down and call the Apple customer support.  It turns out, the problem I had was with iTunes.  For some reason, I had to remove my library and reinstall.  A pain in the ***, but it finally works.

  • Low value asset max.amount exceeded

    Hi all,
    When doing a full settlement in CJ88, I am getting the following error: 'Low value asset max.amount exceeded. No posting allowed'. When I have defined a new asset class, I have copied from a LVA class. The new asset class is not an LVA asset class, therefore there is no limitation. Then, why am I getting the above error?
    Please help.
    Thanks,
    Nas

    ok

  • HT4859 I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    adkennon wrote:
    And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
    I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
    The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
    And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

  • Low Value Asset max. amount exceeded. No Posting Allowed.

    Dear All,
    We are prchasing items under low asset value asset. where low asset value is limit - 5000.
    Now  system shown the error mseeage "Low Value Asset Max Amount exceeded. No Posting Allowed." at the time MIRO tcode.
    PO - 41311*****************
    GRN - 51000***************
    Asset Items -     2 same items - value (4800 of each)
    Please anyone give the reply

    Hi Aman,
    DId you create your asset when you created your Purchase Order?
    Did you create 1 asset or 2?
    Are you trying to enter both assets in the same line in the MIRO invoice?

  • Max amount of ram

    What is the max amount of ram, which the hp g72 b15sa laptop can support?
    On the hp website it says 4GB max, 2GB per slot. But on a review about this laptop, it says the hp g72 b15sa can support 8GB max, 4GB per slot. Which one is correct?
    laptop make and model: Hp G72 B15SA
    operating system: Windows 7 64bit
    This question was solved.
    View Solution.

    This is from the Service Manual:
    Supports up to 8 GB of system memory √ √
    Supports the following configurations:
    ● 4096 MB (2048 MB × 2) √ √
    ● 3072 MB (1024 MB × 1 + 2048 MB × 1) √ √
    ● 2048 MB (2048 MB × 1) √ √
    ● 2048 MB (1024 MB × 2) √ √
    ● 1024 MB (1024 MB × 1) √ √
    The checkmarks are for the discrete graphics and UMA graphics model (which you have), so yours can take 8 gigs. HP just does not sell the G72 in any version with 8 gigs. At the low prices I have seen recently I can think of no excuse not to install 8 gigs. Just do not expect a lot of noticeable difference over 4 gigs.

  • MIRO - Limit Item Category....amount is greyed and no entry allowed

    Hello,
    Is there a way to make the Amount field (DRSEG-WRBTR) not greyed at the line item level in the MIRO Transaction for Blanket POs (invoicing against PO, no GR generated)?
    In order to enter a value into this field, I need to click the Account Assignment button and enter the information in there.  It will then populate the greyed amount field at the line item and an amount can be entered in the invoice and posted.  This is not ideal and we would like the option to just enter the amount on the PO Line item directly to cut down on time/steps.
    Thanks.
    Edited by: Rob Egli on Apr 28, 2009 5:46 PM
    Edited by: Rob Egli on Apr 28, 2009 5:48 PM

    Hi Rob Egli
    The basic purpose of Blanket PO is to procure low value items against Account assignment only. We set the limit in PO and there will ne no GR/or acceptance for this kind of PO(FO) and is not a regular PO activity. You can say it is a Quick Clearing process where_in we need not go thorugh the normal PO>MIGO>IV Process. Each line item can have separate G/L asignment  for posting. Mostly we do this for text item procurement and it serves the prupose very well
    Line item entries are basically designed for Normal POs which are either Costcenter procurement w/o limit or Normlprocurement which may or may not be based upon GR. Here we can do all kinds of Variation with PO quanitity. But in Blanket we can not do such activity as the control lies only with the total limit amount not the quanity of PO , this is the basic reason why line item entry is not there. Once the Limit gets exhausted there will be no more invoicing.
    Regards
    Edited by: samuel mendis on Apr 29, 2009 7:39 AM

  • Max amount of planes in the air simultaniously - giving arrival and departuetime

    hi!
    I use oracle 11g and I have a SQL Server table with a flight field (flightNo) and  two datetime fields (Departuredatetime, Arrivaldatetime).
    How is it possible to query the max amout of planes being in the air simultaniously in a certain timeperiode? result should provide the datetime of this maximum also.
    Example:
    flight55:         |------|
    flight67:              |--------------------|
    flight69:                  |--|
    flight88:                              |-----------|
    result:
    timestamp     no of planes
    09:34             3
    sorry I can't provide an insert because I am beginner and have only read access to the database.
    thank you so much!

    Maybe for a complete solution some Tabibitosan is needed :-)
    Otherwise consecutive time slots will be shown as distinct rows.
    Let's modify Karthik's example data (flight 1 arrives one our later)
    DROP TABLE flight_time_table;
    CREATE TABLE flight_time_table
      flight_no  INTEGER
    , start_time DATE
    , end_time   DATE
    ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH:MI:SS AM';
    INSERT INTO flight_time_table(flight_no, start_time, end_time)
    VALUES (1, '14-JAN-2013 12:00:00 AM', '14-JAN-2013 05:00:00 AM');
    INSERT INTO flight_time_table(flight_no, start_time, end_time)
    VALUES (2, '14-JAN-2013 02:00:00 AM', '14-JAN-2013 10:00:00 AM');
    INSERT INTO flight_time_table(flight_no, start_time, end_time)
    VALUES (3, '14-JAN-2013 05:00:00 AM', '14-JAN-2013 06:00:00 AM');
    INSERT INTO flight_time_table(flight_no, start_time, end_time)
    VALUES (4, '14-JAN-2013 08:00:00 AM', '14-JAN-2013 12:00:00 PM');
    COMMIT;
    WITH  got_in_air_cnt  AS (
        SELECT    start_time
                 ,LEAD (start_time) OVER (ORDER BY start_time)  AS end_time
                 ,SUM (SUM (net_change))
                     OVER (ORDER BY start_time)  AS in_air_cnt
        FROM      flight_time_table
        UNPIVOT   (    start_time
                  FOR  net_change  IN  ( start_time  AS  1
                                       , end_time    AS -1
        GROUP BY  start_time
    ,numbered_count AS(
        SELECT  start_time
               ,end_time
               ,in_air_cnt
               ,CASE WHEN start_time <> LAG(end_time,1,DATE '0001-01-01') OVER (ORDER BY start_time)
                  OR in_air_cnt <> NVL(LAG(in_air_cnt,1,NULL) OVER (ORDER BY start_time),in_air_cnt)
                THEN
                    ROW_NUMBER() OVER (ORDER BY start_time)
                END rn
        FROM    got_in_air_cnt
    ,grouped_count AS(
        SELECT  start_time
               ,end_time
               ,in_air_cnt
               ,MAX(rn) OVER (ORDER BY start_time) grp
        FROM    numbered_count
    ,got_rnk AS (
        SELECT  MIN(start_time) start_time
               ,MAX(end_time) end_time
               ,in_air_cnt
               ,RANK () OVER (ORDER BY  in_air_cnt  DESC)  AS rnk
        FROM    grouped_count
        GROUP BY grp
                ,in_air_cnt
    SELECT  start_time
           ,end_time
           ,in_air_cnt
    FROM    got_rnk
    WHERE   rnk  = 1
    ORDER BY  start_time
    START_TIME               END_TIME                 IN_AIR_CNT
    14-JAN-2013 02:00:00 AM  14-JAN-2013 06:00:00 AM           2
    14-JAN-2013 08:00:00 AM  14-JAN-2013 10:00:00 AM           2
    I use the max-on-case-row-number version of Tabibitosan from About Oracle: Tabibitosan
    Regards
    Marcus

Maybe you are looking for