Max amount of songs that can be written

Hi all
Not that it is a big concern but more a curiosity. Why when there is 700 megs of space on a CD that you can only burn on average 18 songs. If I was to take that same amount of songs and just burn a data file in toast it adds up to about 100 megs. Toast is the same for audio songs..what else is being written or is it just the way the apps are programmed.
thanks

Burning on Data CD/DVD will leave the files unaltered. It is the same as copying from one disk to another.
You will not loose audio quality.
The same is true for purchased music.
To play purchased music on another computer, that computer must be authorized of course.
Find out more about authorizing in this article:
iTunes: About Music Store authorization and deauthorization
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.3.9)   Several ext. HD (backup and data)

Similar Messages

  • How can I have a video of my personal song That I've written in iTunes Have 3200 views in 4 hours, ? Does iTunes upload your iTunes library ?

    How can I have a video of my personal song That I've written in iTunes Have 3200 views in 4 hours, ? Does iTunes upload your iTunes library ?

    You can't write videos with iTunes.  You can't even write anything with iTunes.  iTunes plays media, not create it.
    iTunes only uploads your library if you have subscribed to iTunes Match and then it is only viewable by yourself.  It doesn't include video.
    iTunes is an application that runs on your computer.  It is not the iTunes Store which is something run on Apple's corporate computer's.
    I think there's terminology problems here so perhaps simplify it a bit.  Are you talking about something you have on the iTunes Store server?  I know nothing about that but I guess it is possible people (or more likely automated computer programs automatically scanning the web) have had a look and that gets flagged as a view.

  • What is the max amount of RAM that I can install using Snow Leopard?

    What is the max amount of RAM I can install in my MacBook Pro? Does having Snow Leopard raise the RAM limit?

    Michael Velasquez II wrote:
    Despite only being able to read 3GB, what is the better way to go?
    qty(1) 2GB and qty(1) 1GB Stick
    or
    (2) 2GB sticks?
    In general, for best performance, it's best to match up the same size modules in each slot (2x2 in this case). However, given that it's only going to read 3GB, I'm not sure if that holds true here.

  • HT4859 I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

    adkennon wrote:
    And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
    I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
    The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
    And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

  • When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified.  Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

    The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
    tt2

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • Is there a max number of names that can be put into Contacts

    is there a max number of names that can be put into Contacts and still have the app work well?

    Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

  • Max no of records that can be dispalyed using ALV GRID CONTROLS

    Hi ,
    Can any one please tell me the maximum no of records that are allowed to be displayed using the ALV grid controls.
    As I am getting dump for more records and I need to control the report based on the max no of records that can be actually diplayed using contols.
    Thanks,
    Kavya.

    Dear Kavya.
    If you are getting Dump because you have too many records it means that there is something wrong with the program design.
    ALV is not meant to display more than few thousands of records.
    There is no point is displaying more than few thousands because it will over-flow the users and it will do no good for them.
    If the problem is with the Internal-tables that you're using to manipulate the data, you can think of using an intermidiate DB table that will hold summarized data of the DB data and can be filled via a periodic job. This have the benfit of speeding up the ALV program too.
    thanx
    ayal.

  • Max no of calls that can be queued in ICM

    Where can I find for a given installation the max no of calls that can queued for given ICM system.

    I looked at that but I think the answer is still not well defined. It talks about max call per second.That means that it can receive 300 max calls per second in ICM/IVR system.  It does not say anything about how many concurrent calls can sit in the system and be queued.
    For example on IVR side, we clearly know that it can support X no of  max concurrent calls or whatever the figure may be based on ports.  However for queued calls in ICM, it does not seem to very obvious. Unless I am missing something here.

  • Is there any form that works like Jtable that can be written into the html

    Is there any form that works like Jtable that can be written into the html or jsp format?
    <INPUT TYPE="SUBMIT" NAME="command" VALUE=""> refer to a Sumbit Button.
    There no such thing below "I think"but just dreaming
    Is there something like
    <INPUT TYPE="TABLESUBMIT" NAME="customer" VALUE={rowcolumn(1,3,"peter"),rowcolumn(last,"name","jane")}> ......

    Keep dreaming. As long as you are using HTML you are stuck with
    all of its limitations. Among these is the lack of a JTable.
    You have several options:
    1) Use an HTML <TABLE>. For plain text you just put the
    text between <td></td> tags. For input you put the input
    as <td><input...></td>.
    2) Extend #1 by creating your own object to draw the table.
    You can do this in either Java or JavaScript. There are several
    examples on the internet of how to do this. Some even include
    sorting by clicking the column headings.
    3) If you really want to use a JTable then you can write a JApplet
    and put it on your JSP page.

  • Maximum amount of ram that can be installed

    What is the maximum amount of ram that can be installed in MAC Book?

    MacBook (Mid 2006) (Model ID 1,1): 2GB
    MacBook (Late 2006) (Model ID 2,1): 3GB
    MacBook (Mid 2007) (Model ID 2,1): 3GB
    MacBook (Late 2007) (Model ID 3,1): 6GB
    MacBook (Early 2008) (Model ID 4,1): 6GB
    MacBook (Late 2008) (Model ID 4,1): 6GB
    MacBook (Aluminium Late 2008) (Model ID 5,1): 8GB
    MacBook (Early 2009) (Model ID 5,2): 6GB
    MacBook (Mid 2009) (Model ID 5,2): 6GB
    MacBook (Late 2009) (Model ID 6,1): 8GB
    MacBook (Mid 2010) (Model ID 7,1): 16GB
    Cheers,
    Adam

  • Photoshop can not print the maximum amount of data that can be spooled to a PostScript printer is 2G

    Hi all,
    This is the first time I've worked with the .psb (large format) size and I have gone to print a PDF of the file and I get the message:
    "photoshop can not print this document because the document is too large. The maximum amount of data that can been spooled to a PostScript printer is 2GB".
    The file itself is a 2700x1570mm 300dpi flatten .psb image that is 500mb in size.
    Not sure how I can get around this, where abouts do I see the image size information that is being spooled?
    Any help would be great

    There's no easy way to see the size of the image that's being spooled, but 2G limit is uncompressed, 4 bytes per pixel (either RGBX where X is a padding byte, or CMYK, depending on the image / printer), times about 1.6 because the image data is sent in ASCII85 format rather than binary.
    With your image at over 100 inches at 300 dpi, you're also perilously close to the 32k limit on the pixels in any one dimension (31,900 by my calculations) that PostScript can handle.
    The limits are 32767 pixels in either dimension, and 2GB of data total. The data that's sent at 4 bytes per pixel, and converted to ASCII85 so that it'll make it across any connection. ASCII85 gives about a 1.6 expansion factor, if I remember correctly.
    Do you really need a 10 foot image printed at 300 dpi? If not, changing down to 200 dpi will probably let this image print.

  • Is there any limit on the amount of data that can be read using DB Adpater?

    We are trying to read large amount of data using "Select" of DB Adapter. I wanted to know if there is any limit to amount of records that can be returned in 1 message?
    We have tried for 30K so far and no issues - but any clues on the threshold?

    Hmmm...I dont think there is a restriction for reading data from tables.
    I have fetched more than 65k data and it ran successfully.
    Cheers,
    Abhi...

  • How do I delete all "songs that can not be located" at one time?

    In trying to move my music files around from drive to drive in my computer, I messed up somehow (I don't know what I'm doing, exactly and am just making things up as I go along)....but long story short, I now have duplicates of most of the songs in my music library. With each set of duplicates, there is one music file that plays fine and is "located" to the new drive (where I was trying to move everything) AND a duplicate of that music file that "cannot be located". My ultimate goal is to just delete all the duplicate titles that can't be found. Is there a way to group them all together more easily that using the Ctrl key to hunt and peck then delete them in chunks? Help!! Thanks!

    Using a playlist to collect dead tracks.
    Create new regular playlist – Playlist1
    Select whole library and drag to Playlist1
    Create new Smart Playlist with the rule: Playlist is not Playlist1
    Live updating checked – after you run it, uncheck live updating or you may not be able to delete tracks.
    This playlist should contain all the dead tracks ready for deletion
    http://discussions.apple.com/message.jspa?messageID=5696793#5696793
    Or you can use a Robert Jacobson script - iTunesremovenotfound at:
    http://mysite.verizon.net/teridon/itunesscripts/
    The playlist method doesn't work on large libraries - iTunes get indigestion.

  • Need to format a vpn log text file into a format that can be written directly to a SQL table

    I am trying to do two thing inside of powershell
    1. Take a vpnlog text file  "C:\temp\ps3\vpnlogs\testlog.txt" formatted as such and be able to directly add the columns to a sql table
    "Number" "Date" "Time" "Interface" "Origin" "Type" "Action" "Service" "Source Port" "Source" "Destination" "Protocol" "Rule"
    "Rule Name" "Current Rule Number" "User" "Information" "Product" "Source Machine Name" "Source User Name"
    "291" "29Nov2013" "23:59:00" "" "A*****" "Log" "Log In" "" "" "111.*.*.* " "A*****" "" "" "" "" "pet*******"
    "VPN internal source IP: 192.*.*.*; reason: disconnected from gateway" "Security Gateway/Management" "" ""
    2. Remove the empty colums in this text file so that I can then find a way to upload only colums that have a column name directly up to the sql table via a powershell script .
    SO basically import txt file format it into colums that have data that can then be directly written to a sql table without me having to manually create the columns in the table. if this worked correctly the sql table would be uploaded with the colums and
    data from sql.
    I can do the upload portion with the below listed powershell command however when I import the following file into powershell I have to manually import the testlog.txt into excel then save as a csv to upload... not to mention I had to
    manually create the columns in the sql table so that it imports correctly.
    get-content "C:\temp\ps3\vpnlogs\testlog.txt" I can not get the data to format correctly without manually importing it into the logfiledata.csv.
    $dt=Import-Csv-Path"C:\temp\ps3\vpnlogs\logfiledata.csv"|Out-DataTable
    Write-DataTable -ServerInstance"myserver"-Database"mydata"-TableName"dbo.VPNLOGS"-Data$dt
    I also have tried this to format the text file but it's not working the way I thought it should, but I don't want to have to create the .CSV file if I can avoid it I would rather take the data in powershell formatted and use the colums to
    get-content"C:\temp\ps3\vpnlogs\testlog.txt"|Foreach-Object{
    ($_ 
    -replace'"',',')
    } |Set-Content"C:\temp\ps3\vpnlogs\testlog2.csv"
    | Import-Csv
    "C:\temp\ps3\vpnlogs\testlog2.csv"|selectNumber,date,time,interface,origin,type,action,service,"source
    port",source,destination,protocol,rule,"rule
    name","current
    rule number",user,information,product,"source
    machine name","source
    user name"
    "Number" "Date" "Time" "Interface" "Origin" "Type" "Action"
    "Service" "Source Port" "Source" "Destination" "Protocol" "Rule" "Rule Na
    me" "Current Rule Number" "User" "Information" "Product" "Source Machine Name" "Source User Name"
    "473" "4Dec2013" "23:59:01" "" "AAMESXF604" "Log" "Log In" "" "" "ip72-198-30-53.ok.ok.cox.net" "AAMESXF604" "" "" ""
    "" "usthompst"

    Thank you Mjolinor this seems to have given me a good output, now do you know of a method using the out-datable  and write-datatable that I can use to directly upload the objects and data. Really I do not want to have to create another file at this
    point I would like to take all of this info and now write it directly to my SQL-Table...
       TypeName: Selected.System.Management.Automation.PSCustomObject
    Name                MemberType   Definition                                                                                       
    Equals              Method       bool Equals(System.Object obj)                                                                   
    GetHashCode         Method       int GetHashCode()                                                                                
    GetType             Method       type GetType()                                                                                   
    ToString            Method       string ToString()                                                                                
    Action              NoteProperty System.String Action=Log In                                                                      
    Current Rule Number NoteProperty System.String Current Rule Number=                                                               
    Date                NoteProperty System.String Date=4Dec2013                                                                      
    Destination         NoteProperty System.String Destination=******                                                          
    Information         NoteProperty System.String Information=VPN internal source IP: *.*.*.*; reason: disconnected from gateway
    Interface           NoteProperty System.String Interface=                                                                         
    Number              NoteProperty System.String Number=473                                                                         
    Origin              NoteProperty System.String Origin=********                                                                  
    Product             NoteProperty System.String Product=Security Gateway/Management                                                
    Protocol            NoteProperty System.String Protocol=                                                                          
    Rule                NoteProperty System.String Rule=                                                                              
    Rule Name           NoteProperty System.String Rule Name=                                                                         
    Service             NoteProperty System.String Service=                                                                           
    Source              NoteProperty System.String Source=ip*-*-*-*.ok.ok.cox.net                                                
    Source Machine Name NoteProperty System.String Source Machine Name=                                                               
    Source Port         NoteProperty System.String Source Port=                                                                       
    Source User Name    NoteProperty System.String Source User Name=                                                                  
    Time                NoteProperty System.String Time=23:59:01                                                                      
    Type                NoteProperty System.String Type=Log                                                                           
    User                NoteProperty System.String User=*******  

Maybe you are looking for