MAX and whole comp. gets freeze when I tried to run RESMAN

Hi
I am trying to run RESMAN for VXI-MXI-2 in MAX 3.3.1, but it and the computer gets freeze and said "Searching for Statically Configured Devices" such as message 1 (attached). Then next time I tried to run it again it says "VXI locked up" I have to reset it. Please help!! Thanks in advance.
Attachments:
message 1.jpg ‏73 KB

This problem happens when there is no VXI Bus Timeout. The way to verify it is when the Resource Manager locks up again, turn off the chassis but leave the computer on, if the computer resumes and go back to normal, then this will be the cause of the hanging.
The fix to it is to configure the VXI-MXI Bus Timeout, since you can not use the configuration utility, try switch the Factory Overwrite dip switch, this should fix it for you. The location of the this Factory Overwrite switch can be found in the KnowledgeBase you saw before:
http://zone.ni.com/devzone/conceptd.nsf/webmain/86054DE2C9DACE7A86256CEE0070237C?opendocument
The TMExlorer only came with older versions of VXI driver and the new driver uses Measurement & Automation Explorer which covers all the functionality of the old TMExlorer. By switching to the old driver will not help in this situation.

Similar Messages

Iphone getting freeze when a message arrive during a conversation

the iphone 4 with os7 getting freeze when a message arrived the phone during a conversation is in progress. needed to lock & unlock the phone to get rid of the problem. Any help?

Hi chocotee,
If you haven't already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes. Please be sure to backup your iPhone first.
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
http://support.apple.com/kb/HT5262
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

I uploaded a photo onto my desk top and it was too big when I tried to change it I couldn't get into iPhoto it just wouldn't open

I uploaded a photo to my desk top as my screen saver and it was too big, when I tried to get back into iPhoto I couldnt, it wouldn't open, I closed it and tried again and it still will not open, can you help me?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I downloaded version 4.0.1 and it crashed my system- my Norton no longer works and Firefox browser won't open. I did system restore which did not fix it. I tried downloading 4.0.1 again, it freezes when it tries to open "Checking add-on compatibility".

I downloaded version 4.0.1 and it crashed my system, my Norton no longer works and the Mozilla Firefox browser won't open. I did a system restore, which did not fix it. I tried downloading 4.0.1 again, it freezes when it tries to open "Checking add-on compatibility". What the heck is going on??

When I downloaded new stupid version causing crash my system My Norton gone
after 4 h struggling finally I got it back but only protection I lost my identity safe data witch is very important for me my password can not be verify and I can not fix it I'm so mad I want old version back

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

Lion, system preferences freeze when I tried to change wall paper,how do I fix this?

lion, system preferences freezes when I tried to change wall paper,how do I fix this?

Quit System Preferences if it's running. In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item.

I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store

I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store. OS was OS X Mountain Lion 10.9 When I received it. Is it because of OS? I upgraded to OS X Mavericks right after I got it.

Today, I went to the mac store and asked the staff about above issue. Apple obviously sent me a mac air which was manufactured before October 2013 and therefore, iworks and OX Mavericks weren't installed. I have refund for around £45 to purchase iworks. However, I wasn't happy with what Apple actually did. I asked for replacement and refund the one I got and getting the new one from store so I can use mac straight away. however, the refund takes 5-7 working days. The staff on the phone told me if I have enough money I can just buy the new one in the store and get refund later. So I gave up! I was so disappointed with Apple. Even though I use the mac now, this was not the one Apple promised when I purchased online. if anyone would like to buy a mac, Please go to the actual store. DO NOT buy a mac through MAC ONLINE STORE!!! I strongly recommend! I feel like I wasted my time because the company doesn't keep its promise.

Why did all my music on my iphone get erased when i tried to sync to the iTunes on my new laptop?

why did all my music on my iphone get erased when i tried to sync to the iTunes on my new laptop?

As a rule syncing is one way, from the library to the device. There should have been a warning that media content on the device would be removed and replaced with that in the local library. If the content were still on the device it could be recovered with the steps in Recover your iTunes library from your iPod or iOS device. You can redownload your qualifying past purchases from the iTunes Store, Amazon store, etc. Do you have the previous computer your device synced with, or a backup, from which the library could be recovered?
tt2

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

My phone is deactivated, and i cant get it open..tried Itunes but since the phone is locked, i cant to anything..???

Hi,
my phone is deactivated, and i cant get it open..tried Itunes but since the phone is locked, i cant to anything..???

Have you read the document ...............
That tells you how to fix an iPhone locked because the owner has forgotten the passcode
if you have a different problem explain it using more than just grunts
You need a PC or MAC with iTunes installed on it to achieve this AS IT SAYS IN THE DOCUMENT

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

MX 2006 is so old it's no longer supported. See if this helps you.
Error: Unable to Activate | Macromedia products
Nancy O.

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hi nprguy,
It sounds like an earlier version of the BlackBerry® Desktop Software installed on your PC may be conflicting with this installation.
I would advise uninstalling both versions of the BlackBerry Desktop Software then reinstalling the latest version.
The following KB articles should provide more information on the issue.
"The feature you are trying to use is on a network resource that is unavailable" when uninstalling BlackBerry Desktop Manager www.blackberry.com/btsc/KB10220
"Error 1316" InstallShield error is encountered when uninstalling or upgrading the BlackBerry Desktop Software
www.blackberry.com/btsc/KB04272
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

HT1349 I keep getting a compatability message trying to run my iTunes on Windows 7. I have reinstalled iTunes and ran diagnostics and keep getting the message. I also have been intouch with Apple Support. Why doesn't it work with Windows 7?

I keep getting a compatability message trying to run iTunes on Windows 7.
I have tried contacting Apple Support and sent a print screen picture.

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489
Uncheck all boxes in Compatability tab.

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

Her contacts would be wherever she put them
The iphone is designed to be synced to your computer or cloud service regularly. If she failed to do this, then they are likely gone.

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes. Can anybody advise?

I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpful

Hello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/

MAX and whole comp. gets freeze when I tried to run RESMAN

Similar Messages

Maybe you are looking for