Max binary file size in r3
we have certain reports that dump large files (over 1 gb). in r2, we set the max binary file size (cmc > servers > webi rep server) to handle this. where is this setting in r3 (we're actually at 3.1).
thanks in advance....
Hi Shawn
The exact location is:
Properties of WebIntelligenceProcessingServer > In the Web Intelliegece Processing Service section >
Binary Stream Maximum Size (MB).
By default it is 50MB in BO XIR3.1
Regards,
Hrishikesh
Similar Messages
-
Greetings.
After a few browsing sessions, I haven't found direction for a specific problem within a project bloat. First and foremost; we're always backed up. I have a restoration copy of the project that I will reference herein. Check that off the list.
Numerous people have posted here and around Creative Cow with problems regarding an expanding file size using CS6; watching files go from 300mb to 2.8gb. The unfortunate problem is when the project crosses a magical line that results in an inablity to open, import, export, or access sequences contained therein. Has anyone addressed a solution to repairing Premiere CS6 save files? Reducing file bloat? I haven't seen anything (recall the FCP7 repair days... solutions existed because problems were frequent; thankfully not so bad with Adobe).
Does anyone inside the code size know the maximum project file size that Premiere can read? I created a monster... Over 200 sequences utilizing 4.5TB of footage, stretching from Red codecs to EXCam to MPEG4 and H264. And for some time, the project size was manageable. Then, it inflated. And one day, randomly stopped opening. None of the auto-saves open.
Just curious. Files aren't the problem, but the 2.8GB save file is. Machine specs // etc. are openly available if required; no bad ram, no problems with all projects (just this one beast).
Cheers,
Jon Michael RyanREALLY_ Mac has a history of being more stable than PC with Premier ...
Pastor Bernie
International Evangelism Coordinator
Global Teen Challenge
visit us on FACEBOOK (http://www.facebook.com/bernie.gillott) or on
twitter-just tweet globalcry
~~~~Pray Big or Stay Home~~~
www.bgillott.org (http://www.bgillott.com/)
426 Newport News Ave, Hampton VA 23669
Phone (757) 728-0347 cell (757) 218 8499
In a message dated 6/2/2013 5:50:50 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Project Bloating and Repair in Premiere Pro CS6; Max Project File
Size? Adobe Coders Welcome...
created by joe bloe premiere
(http://forums.adobe.com/people/joebloepremiere) in Premiere Pro - View the full discussion
(http://forums.adobe.com/message/5373302#5373302) -
What is the max mp4 file size?
Does anyone know what the max mp4 file size that can be imported into iTunes for sync with ATV is?
RichSolNuv wrote:
I got HandBrake to work. What settings do you recomment for ATV? When I used the Apple Tv setting it worked pretty quick and I could view the file in iTunes, but it would not import into ATV. I got a message saying it was not playable on ATV. The "Normal" setting (h.264) seems to work good. I did a few minutes of a movie and it looks good and works with ATV, but it seems to take a lot longer (hours).
With Handbrake 0.9.1, always select "Apple TV" under the "Presents" column on the right side of the window. When you say it is "not playable on ATV" do you mean by streaming or syncing or both? -
Max Character File Size Limit exceeded.The document is too large to process
Hi
I have made set on section on products in report.
the Reports contains around 50 products when im opening the report
in draft mode the following error is displayed
"Max Character File Size Limit exceeded.The document is too large to be proceesed by the server .Contact your business Objects Administrator."
can some body help me out how to increase my report character file sizeHi,
If you are using Business Objects XIR2, there is a performance parameter in the Web_Intelligence Report Server where you can increase the size of that file. The parameter is Maximun Character File Size. Go to the CMC>Server>server.Web_IntelligenceReportServer in the Properties tab you will see it.
Cheers,
Luigi -
Huge binary file size difference LV 6.1 to LV 8.2
I have an application that was first developed under LabVIEW 4.2 and has been periodically upgraded as necessary. It is normally run as a built application so LabVIEW version changes only come in when something in the application has to be changed. That occasion occurred and we changed from LabVIEW 6.1 to LabVIEW 8.2 for the build environment. No changes were made to any of the file handling vis (other than what LabVIEW did in the conversion, which I didn't check at all).
The problem is that this application writes a large structure (4320 elements in each of 13 single-precision variables) into a binary file once a day. When I started the new version of the application the size of the files went from 242956 bytes to 775334 bytes.
The vi to read these files still works for the old files as well as the new files and a set of C routines that I use to read the files seems to also work correctly with the new files - at least the data looks like it is supposed to when it is plotted.
The change in file size is a concern since this application is supposed to keep writing these files every day for many years into the future.
Is there any known way to return to the original behavior with the smaller files?Hi Bryan,
you say: "all changes are made with rotates and insert elements to prefent the arrays from growing"!
You should use "replace array elements" to prevent array growth!!! Please check this with your application!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Unable to set max log file size to unlimited
Hi all,
Hoping someone can give me an explanation of an oddity I've had. I have a series of fairly large databases. I wanted the make the database log files 8GB in size with 8GB growth increments with
unlimited maximum file size. So, I wrote the script below. It seems to have worked but the database max size doesn't show as unlimited, it shows as 2,097,152MB and cannot be set to unlimited using a script or in SSMS by clicking on the unlimited radio button.
2TB is effectively unlimited anyway but why show that rather than actually setting it to unlimited?
USE
[master]
GO
--- Note: this only works for SIMPLE RECOVERY MODE. FOR FULL / BULK RECOVERY modes you need to backup the transaction log instead of a CHECKPOINT.
DECLARE
@debug
varchar(1)
SET @debug =
'Y'
DECLARE
@database
varchar(255)
DECLARE
@logicalname
varchar(255)
DECLARE
@command
varchar(8000)
DECLARE
database_cursor
CURSOR LOCAL
FAST_FORWARD FOR
select
DB_NAME(database_id)
as DatabaseName
name
as LogicalName
from
master.sys.master_files
where
file_id
= 2
AND type_desc
= 'LOG'
AND physical_name
LIKE '%_log.ldf'
AND
DB_NAME(database_id)
NOT IN('master','model','msdb','tempdb')
OPEN
database_cursor
FETCH
NEXT FROM database_cursor
into @database,@logicalname
WHILE
@@FETCH_STATUS
= 0
BEGIN
SET
@command
= '
USE ['
+ @database
+ ']
CHECKPOINT
DBCC SHRINKFILE('''
+ @logicalname
+ ''', TRUNCATEONLY)
IF
(@debug='Y')
BEGIN
PRINT
@command
END
exec
(@command)
SET
@command
= '
USE master
ALTER DATABASE ['
+ @database
+ ']
MODIFY FILE
( NAME = '''
+ @logicalname
+ '''
, SIZE = 8000MB
ALTER DATABASE ['
+ @database
+ ']
MODIFY FILE
( NAME = '''
+ @logicalname
+ '''
, MAXSIZE = UNLIMITED
, FILEGROWTH = 8000MB
IF
(@debug='Y')
BEGIN
PRINT
@command
END
exec
(@command)
FETCH
NEXT FROM database_cursor
INTO @database,@logicalname
END
CLOSE
database_cursor
DEALLOCATE
database_cursorHi,
http://technet.microsoft.com/en-us/library/ms143432.aspx
File size (data)
16 terabytes
16 terabytes
File size (log)
2 terabytes
2 terabytes
Thanks, Andrew
My blog... -
Max AVI file size into Final Cut Express?
I am a complete newcomer to mac and FC - About to begin loading all my old video onto disk. If I stream 90 min of Hi8 into one AVI file it will be easiest but will the file be too large for FC Exp - is there a file size limit or not - I am assuming not.
Sorry, simply my old Adobe Premier/Windows background - simply wanted to know whether there was any file size limit in FC however I have just captured and imported a complete tape so clearly not.
-
What is the Max import file size for Aperture
I'll some times shoot film and get very large scans done as Tiffs or Jpegs. 500MB+ What is the Max that Aperture can manage, or is it only determined by the Mac configuration?
I'm curious to know this as well before upgrading. Hopefully it has been improved in Aperture 3. I know Aperture 2 only supported up to 250MB which was near useless if you'd ever made any significant adjustments and edits in Ps and saved it as a .psd.
All my medium format (digital and film scans) and large format scans give me the maroon "Unsupported Image Format" error while trying to view in Aperture 2. -
Max. File Size in Archivelink
Hi All
Is it possible to set a maximum size of documents uploaded through SAP Archivelink?
I personally havent come across any configuration table where this can be put in. Is custom development the only way to set a maximum limit?
Regards
Joy KaushishHi,
>Is custom development the only way to set a maximum limit?
I suppose so. I've also never seen a maximum size parameter.
I may be possible inside the content server software (Ixos or Filenet or...)
Regards,
Olivier -
Maximum Image file size flash can handle?
Does anyone knows the max image file size flash can load
using MovieClipLoader?
I tried 10.5 MB PNG file and Flash thinks it is loaded but,
the actual image never shows up.
Thanks,Well it is good for that client. But it still won't work in
Flash. Sorry. You will need to slice the picture into different
chunks at 2880 x 2880 max and reassemble the tiles in Flash.
You may also run into an issue that things sometimes get lost
if there is more that 16,000 (or thereabouts) pixels difference in
their coordinates. -
Premiere Pro CS6, large project file size - crashing etc
Working on a project in Premiere Pro CS6 - also incorporating after effects and using 2 external plugins (Beauty Box and Factory Pro FX). Project is over 500MB, lots of comps, titles etc. project seems to be corrupt on my machine. .The project crashes continually. I cannot save my work, I cannot export, I cannot create XML and media is linking incorrectly. When I pull the project in on my laptop (separate machine) which has CC 2014 running, the project is FINE. That said - I need to work off of the more powerful machine to do this job - so need to find a way to troubleshoot. Note - project opens on my partner's machine, she can save + export, etc - however the media in still linking incorrectly on her machine as well (note partner does not have the 2 plugins, beauty box and factory Pro FX) - that said, it still links to the wrong media.
We have worked out a work-arond where we pull all of the AE sequences out of Premiere and into separate AE project which has made the project workable again but we know something is WRONG and we need to fix for future ASAP.
please help!
thank youREALLY_ Mac has a history of being more stable than PC with Premier ...
Pastor Bernie
International Evangelism Coordinator
Global Teen Challenge
visit us on FACEBOOK (http://www.facebook.com/bernie.gillott) or on
twitter-just tweet globalcry
~~~~Pray Big or Stay Home~~~
www.bgillott.org (http://www.bgillott.com/)
426 Newport News Ave, Hampton VA 23669
Phone (757) 728-0347 cell (757) 218 8499
In a message dated 6/2/2013 5:50:50 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Project Bloating and Repair in Premiere Pro CS6; Max Project File
Size? Adobe Coders Welcome...
created by joe bloe premiere
(http://forums.adobe.com/people/joebloepremiere) in Premiere Pro - View the full discussion
(http://forums.adobe.com/message/5373302#5373302) -
my users demand high quality videos - however when they are
saved they are 33megs in size - is this too large?
Does anyone have a solution for achieving high quality at a
smaller file size? what is the max recommended file size?
thanks
goggabey wrote:
> my users demand high quality videos - however when they
are saved they are
> 33megs in size - is this too large?
> Does anyone have a solution for achieving high quality
at a smaller file size?
> what is the max recommended file size?
Well, many sites where videos are big part of the entire
concept, are big. Bigger than 33megs.
Question here is how long is the video? Could be 2 seconds
then 33 is way too much.
3 minutes and 33 megs, very good !
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
HI
I have a huge file being syndicated via automatic port - 120 Meg
I takes 2 hours to generate the file, but when writing file to the port it seems to hang
When the file is done manually it takes a minute to save after generation.
I know it possible to set max. amount of materials during syndication, but this is not possible in this case.
I have not yet tried to time the syndication for later, but i guess it will still be a problem with the time used to write to port.
Any suggestions?
max. File sizes?Hi Kurt
Syndication process also means updating the last syndicated time in MDM DB for the records so that they are not considered for next syndication. I am assuming that you are using Suppress Unchanged records in the map.
Updating the records will take time depending upon the load on MDS.
Try to schedule this syndication in off peak hours, may be faster.
Also you can try to reduce the file size(no of records) based on some filter conditions in the syndication map, but that will mean having multiple ports and maps.
thanks-Ravi -
What is the max file size that a Adapter Engine [J2SE] can handle ?
We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk -
Automation in saving a image file with a specific max file size
Hi everyone,
I hope someone can help me by this.
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Any help is really appreciated!
Thanks in advance!
Kind regards
Packesel*push*
Hi everyone,
I still need help with this. Is there any tool (OS X) or script for Photoshop who can fulfill this (see title).
ANY help is really appreciated!
Thanks in advance.
Regards
Packesel
Maybe you are looking for
-
Got GPF upon closing Adobe Acrobat 8
Hello, does anyone know if there is a fix for this? (1) In windows XP, Install Adobe acrobat 8 professional. (2) Launch adobe, Click "Help-->Check for Updates..." to update to 8.1.2 or the latest. (3) Launch adobe, again, select Edit-->Preferences, s
-
Transferring from PowerMac to Mac Pro
Hi All- Couple of questions. My beautiful Power Mac has finally become out of date - for my business at least - though I plan to use it for personal use. Today I purchase a Mac Pro and I'm currently installing software, etc. I want to wipe clean and
-
Transaction removed from menu still apprears in S_Tcode
We are doing a role clean up and removed transactions from a general all user role that were causing SoD violations and access was restricted. It's audit time and guess what the transactions are still appearing in S_Tcode even though they are not in
-
The two finger cycle through apps does not work?
Hello, I don'nt know what is wrong, but it seems that the two finger gesture allowing to cycle through apps does not work for me. I am using a standard mac Bluetooth mouse. Can anyone help me with this? Thank you Sebastien Dion from Quebec city, C
-
i am downloading music from itunes it shows on my purchased playlist but when i try to transfer it onto a specific playlist it won't transfer across what do i need to do