MAX CAN logfile missing bits?

I am using the Measurement & Automation Explorer as a Bus Monitor for a CAN bus (using a PXI-8464 module in a PXI-1036 chassis, connected via two PXI-8331 cards to a PC), with all messages logged to a file in comma-separated values (.CSV) format. The first field of each record in the logfile is labeled "Arb ID.". The contents of the data in that field are apparently the 11-bit standard identifier concatenated with the 18-bit extended identifier (I'm using extended format messages). One other odd thing: each value in that field has an asterisk at the end of it.
Q1: What happened to the other 3 bits of the arbitration ID (SRR, IDE, and RTR)?
Q2: What does the asterisk mean?

Hi nmholmgren,
The SRR, IDE, and RTR are not part of the Arbitration ID.  What do you see missing? 
The * simply means that an extended Arbitration ID is used.  An "R" showing means a remote frame is used.  For more details on the Bus Monitor, you can also click the "Help" button within the Bus Monitor.
Have a great day!
Chris R.
Applications Engineer
National Instruments

Similar Messages

  • Missing bits

    I've got missing bit from my '8.1.5ee + patch to 8.1.5.0.2 on my RedHat 6.0.
    With everything installed off the CD and running!
    Got no 'oratclsh' utility and can't get it to build from the .mk files!
    Got no audio and video demos in interMedia and yet image demo 'imgdemo'is installed and works! (lost 'auddemo.sql', 'fplugins.sql', 'fpluginb.sql' etc)
    Got no 'ordmm.zip' in my jlib's.
    I know the manuals are sketchy but the Admin Reference for Intel-Linux mentions this lot!
    Where can I get 'em or how do I build 'em?

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by colin:
    Got Web interMedia Agent to install and work
    with 8.1.5
    using RedHat 6.0 installed with Apache 1.3.12 and configured as in ReadMe.htm document for webagent.
    Note:
    RedHat rpms for apache don't give you all the stuff you nead and are ancient on 6.0!
    So I had to ditch RedHat's and install the http://www.apache.org downloads.
    Problems:
    Had to put ...jre116_v5/lib/ft.jar in my CLASSPATH in order to run runIns.sh from the CD (although OUI already ran as runInstaller and is the same thing I think?)
    Watch out for the chmod's to open up your .../ord/wed/logs directory or else you will get mwm-00067 when you start Apache.
    Test using:- http://'host':'port'/intermedia/~test
    where port in my case is 80.
    Pity On line Administration can't be used in Apache!<HR></BLOCKQUOTE>
    And any luck with web agent 8154 and 8.1.6 database in another machine? I you look in the intermedia forum I put all the details of my configuration, but I compile everything without a glitch but I only get "404 - Page not found" in Apache.
    Maybe I have to a downgrade...
    null

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • 3ds max can't save to lion server, 3ds max can't save to lion server

    I know there have been many discussions in the past few weeks.
    Please if any one can help me with a sollution or work around I will appreciate it.
    We have a mac mini server and both mac's and windows in the office.
    All work perfect except 3ds max can't save or open files from the lion server. All other programs work perfect from the windows machines to the lion server.
    Anybody found a solution yet?

    No I'm still going around in circles. It's infuriating, everything else is working fine, I just have this one issue with the .max files.
    I phoned Apple yesteday, hoping that they may help as we have an AppleCare Protection Plan that supposedly has software support. They have not managed to help in anyway, and have suggested that I take out some kind of cross platform support at extra cost, although they may not be able to help either.
    They are saying it is third party software vendors responsibility to sort out a fix, which annoys me, as we haven't changed the third party software, we've upgraded the server and now our workflow is broken. I have read of other people that have contacted Autodesk about the issue and they have said that the problem is down to Apple using their own SMB in Lion Server, but haven't mentioned any kind of fix/workaround.
    I don't know whether switching the servers SMB off and running SMBup may help. It's not something I really want to do, but I'm really running out of ideas.

  • MAX can't find USB6210

    Hi, I met a strange problem with my MAX,  I pluged the USB 6210 to my laptop, device manager found it. But MAX can't find the device, restart and refresh several times, even restart the windows several times, and reinstall the MAX, the problem still exists.
    It is so weird, don't know why MAX can't identify the device.

    NI DAQMX Version is 9.5.1, MAX is 5.1, Labview is 2011.
    I asked my coworker to uninstall Labview environment entirely, and I made an installer with DAQMX, MAX, but he installed the installer, his laptop still cant find the device, while Windows works well.

  • How can I write bits through the COM1 serial port?

    I'm trying to write bits through the serial port COM1.
    Labview "Write VI" only writes everything in string. It seems. How can I write bit by bit through COM1?
    Thank you,
    Van

    Serial transmission (COM port) protocol requires sending a group of bits at one time. You cannot just send one bit. Standard COM port settings must be either 7 or 8 data bits, 1 or 2 stop bits, etc... You have to group your bits 7 or 8 at a time. You could probably send a 0 byte or a 1 byte. This would be like sending 0000 0000 for a low bit and 0000 0001 for a high bit. Your receiving end would have to know how to interpret what you are sending if you choose this method. Of course you have to convert your byte into a string before sending to COM port. Wire a U8 data type to a Build Array input. Then wire the array output to a Byte Array to String input. The output of this function will be the character representation of your byte suitable for sending acr
    oss a serial port.
    - tbob
    Inventor of the WORM Global

  • Max can't display cards anymore

    Hi All,
    I have a problem with my DAQ PC, when I run the NI MAX program it no longer shows the two cards that are installed under the "Devices and Interfaces" folder, see screenshot.
    The windows device manager can display them however.  Anyone got any ideas as to why MAX can't see them.  The system used to be working fine, but today I've seen
    this problem.  I've tried power cycling the system and rebooting it a number of times.
    Thanks if anyone can assist.
    Solved!
    Go to Solution.
    Attachments:
    chassis1_cantfindcardserror.jpg ‏128 KB

    Hello,
    Thank you for posting to the NI Forums!
    Malhar's suggestion is probably on the right track. It is likely that you have a MAX Database Corruption. One of the main signs that this has occured is that when a "plus" sign that would normally be clicked to expand that menu is clicked, the plus sign dissapears. I noticed in your screen shot that the plus sign next to Devices and Interfaces is gone. 
    The best document to look at would actually be the knowledgebase called What is the Process For Removing MAX Database Corruption?
    This procedure is a little long and slightly tedious. Please be careful to follow the steps exactly so the procedure works. Please post back if you have any questions. Have a great day!
    Regards,
    Margaret Barrett
    National Instruments
    Applications Engineer
    Digital Multimeters and LCR Meters

  • MAX can't detect TPC-2106T

    not sure if it's the right place for posting this but i had to ask this
    I have TPC-2106T touch panel and want MAX to detec it but it won't for some reason
    i have the touch panel module installed and the touch panel is correctly connected to the network which my computer is connected as well
    MAX can detect my compactrio but it can't detect touch panel..
    Does anyone have any clue??
    thanks
    Solved!
    Go to Solution.

    Go through the following documents and post back if you have any other questions.
    LabVIEW Touch Panel Module Getting Started Guide for LabVIEW
    Getting Started with National Instruments Touch Panel Computers using LabVIEW
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How can I avoid bit stuff?

    ---- card=pci-can/2---
    how can I avoid bit stuff?
    when i am using ncgetattr.vi,the return value of series2 error/arb captue is 10100010.
    Then how can i resolve the problem!
    thanks.
    Work hard and enjoy life.
    Love CVI and Labview!
    Certified Labview Developer

    Hi 侠客
    The Series2 error/arb capture register indicates where the last error happened. In this case, the bit stuffing rules (not more then five consecutive bits of the same state) where violated. Typical causes are:
    Baudrate mismatch (most likely no commmunication at all possible)
    Improper termination (please see chapter 4 of the NI-CAN Hardware and Software Manual for more information)
    Wirering schema not compliant with the CAN specification (ISO 11898), e.g. stub/drop length too long, star-type setup instead of a chained setup 
    -B2k

  • NI MAX can't detect instrument but the instrument can be pinged

    Hi,
    I'm in the process of connecting a Lecroy oscilloscope to a cpu via a cross over cable with plans of controlling the scope through some VIs. I cannot get NI MAX to find the oscilloscope, even though I can ping it. Below are the steps I've taken:
    1) Installed NI-VISA and VICPPassport along with all the appropiate Lecroy drivers for Labview
    2) Configured the IP addresses of the scope and CPU and successfully pinged each other (no firewalls active, same subnet, connected with cross-over cable).
    3) Installed Lecroy's wavestudio software, established succesful communication with the scope (it had no trouble finding it automatically)
    4) Opened NI MAX and tried to auto detect the scope using create new TCP/IP option. Failed. Also, the manual option failed as well.
    I don't understand why I can ping the insturment, and interact with it using wavestudio, but NI MAX can't find it.
    Any ideas?
    Thanks

    Hello SimonWall,
    The VICP pport (the rules of the post do not allow me to use the word p&$$port correctly) uses port 1861.  The firmware on the TeledyneLeCroy scope will setup firewall rules to allow the LXI and the VICP connections.  Typically, the issues with a block are either the fact that WaveStudio (or some other application) is still connected to the device when attempting the connection, anti-virus software that has been installed on the scope, or the scope has been connected to a company network that implements policies that have blocked it.
    There is an app. note on the TeledyneLeCroy website that describes the VICPpport (and has the port information as well) that may help you: (Due to the rules of the community for posting here, I cannot add the link, but you can search on VICP from here)  TeledyneLeCroy App Notes
    I hope this helps!
    Leonard Brown
    Applications Engineer
    TeledyneLeCroy

  • TS1347 IPhone5 on 6.1.4 - missing named contacts on contact list. Can see missing named contacts when messaging, but when selected come up as only phone numbers in the sent to window. What is resolution? Can I sync only contact list from to iTunes backup?

    IPhone5 on 6.1.4 - missing named contacts on contact list. Can see missing named contacts when messaging, but when selected come up as only phone numbers in the sent to window. What is resolution? Can I sync only contact list from to iTunes backup?

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • DV7-4053, MB manual states 8 gig max, can it run the 2x8 (16g 1333) modules now available?

    Had no problem with upgrade from shipped 4gig to 8gig (2x4), now that 8gig modules are available, I am hoping to put a 2x8gig 1.5v kit in and have a seamless upgrade once again to full 16gig of 10666/1333...
    I know in the past as technology advances, the manuals can become a bit outdated and obviously are printed based on available modules at time of print.....
    Hoping for a seamless upgrade 8 to 16, is it possible or has somepone already taken the dive and tried 8gig modules already?
    Thanks
    Upgrades so far
    mems from 4 gig to 8gig
    added secondary HD, 500gig 7200rpm, matches boot drive, will convert one to external, see below....
    planned upgrades
    SSD boot drive
    hoping for 8gig to 16gig on mems (only two slots)

    Hi,
    SSD as a boot drive is a good choice but the memory upgrade won't work. The chipset on the laptop doesn't support more than 8GB of RAM and the BIOS won't let the laptop even boot up with 16GB (2x8) of RAM, I guess. 8GB of RAM is enough even for playing games..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Which phone or software can show miss call list in...

    Which phone or software can show miss call lists in separate lines/items/details (not group together from the same person).
    I want these:
    1. wife missed call me 9.00AM
    2. wife missed call me 9.15AM
    3. I see phone and see 2 missed call items in separate 2 lines and then I press clear.
    4. wife missed call me 10.00AM
    5. I see phone and see 1 missed call item.
    Thank for advance

    Have you copied the inf file from another system and copy it to windows system directory?
    You need to have that copied or you need manually each and every system using the server name and System ID
    thanks.
    Wond

  • I have a recently acquired iphone 4s and despite having good hearing and the volume up to max can barely hear who ever I am speaking to. WHat is wrong with the phone?

    I have a recently acquired iphone 4s and despite having good hearing and the volume up to max can barely hear who ever I am speaking to. WHat is wrong with the phone?

    The plastic cover was removed before I left the store and I have moved the volume up and down during, before and after phone calls. Have tried it in protective case and out of it. Impossible to hear calls unless phone is on speaker. There seems to be lots of comments re this. Is it a significant flaw? Can I fix it?

  • Sony KDL32W4000 - missing bits on overscan; blurry; refresh rate

    I've connected the mini to the TV (which is a full 1920x1080 HD set) - using mini-DVI to DVI-D to HDMI.
    When in overscan I'm missing the edges of the screen - the menu bar at the top is outside the physical border of the screen but is usable (ie I can use the mouse in the border of the screen but can't see either the mouse or the top line of the menu). When it's not in overscan I'm using about three quarters of the screen.
    Is there a way to make it fit the screen within the physical borders of the set (ie using overscan but keeping the borders of the screen within the physical boundaries of the set - or turning overscan off but expanding the screen out to the boundaries of the set).
    It is, I think, a 100hz set but in display options I'm only seeing 60hz - is there a way to increase the refresh rate when used by the mini?
    The screen fonts are also a bit blurry - any tips on who to improve visual acuity?
    I haven't upgraded to 10.5.7 at this stage due to the problems people have been having with it - will do so once I do a time machine backup of the current setup.
    Thanks.

    Answering my own questions again - you get the full screen filled out to (but not past) the borders of the set if you set the display area to full pixel rather than "normal" (press Home on the remote then navigate using XMB to settings) and then on the Mini set the Mini's display prefs to overscan. The full pixel setting only affects the TV when it is getting a signal from the pc and doesn't apply when it is used as a TV (so no need to reset it when you want to use the TV as a telly). The font still isn't amazing but this may be due to me sitting further back than I'm used to.

Maybe you are looking for