MAX cannot see my PXIe-5122

Hello,
I'm currently in a training period and I try to install a instrumentation banch for my tutor.
So I have a chassis PXIe-1075 which is connected to my computer by a PXIe-8370.
There are 3 modules :
- PXI-4071
- PXI-5422
- PXIe-5122
For the two first i have no problem to see them in MAX. But the last one doesn't appear in MAX ?
I installed LabView 2010, also NI Scope and a lot of others softwares provides with my products.
Somebody can help me ? =)
Solved!
Go to Solution.

Hi,
First of all I had installed the version 3.6.2, and after downloaded on NI I installed the 3.8.7.
No I didn't try a other slot because when I recieved the chassis, the modules were already installed.
In Windows Device Manager I can't see my modules. I enclose a screen impress.
Thank you for help.
Attachments:
device.png ‏156 KB

Similar Messages

MAX cannot see PXI-8252

Hi all,
I have NI PXI-1042 with PXI-8187 and PXI-8252. In MAX-Devices and
Interfaces I
cannot see 8252 (port 2 empty). I tried to uninstal and reinstall 8252
(add
hardware).
Thanks in advance.

The driver for the PXI-8252 is included natively in Windows. Since NI does not provide the driver for this board, the board will not appear in MAX.
Does the PXI-8252 appear normally in the Windows Device Manager? Are you able to communicate to 1394 devices?
If you connect a 1394 device for which NI does provide the driver, that 1394 device should appear in MAX. For example, if you connect a 1394 camera that is supported by NI-IMAQ for IEEE 1394 then the camera should appear in MAX.

NI MAX cannot see / looses network instrument

There appears to be a bug with NI MAX where a network instrument which was previously configured suddently dissappears and when we attempt to re-establish the instrument, MAX claims that it cannot find the instrument.
This was seen on 4 different stations, all sharing the similar behavior. This was also seen at a completely different customer where the configuration was setup by a fourth person. At client # 1 there are 4 stations. They were setup by 3 different people using the same instructions. Everything was fine on all 4 stations. All of a sudden, the information dissappears from the network instrument list and it is not possible to re-configure the network instrument within MAX. A similar behavior was reported by another client which is totally different than the first client. NI MAX was configured by a different person than at client 1, possibly using different steps (although it is quite simple to setup a network device within NI MAX).
NI MAX at client #1 are versions 5.40f0 and 14.0.0a2.
NI MAX at client # 2 is version at least 14.0.0a2.
If we copy an exported settings file from another station, the network devices are restored and it is possible to use the network instrument. However, if you attempt to setup the instrument manually, because MAX cannot find it automatically, it is not possible to validate the instrument and complete the setup. Even if you cheat and complete the setup, the PC will not communicate with the instrument via VISA. However, it is possible to communicate with the instrument outside NI MAX. The instrument is seen by the PC and does respond to ping requests.
See image below.
When trying to validate the instrument, NI MAX responds with the fact that it could not open a VISA session via TCPIP.
My first question is: why does the instrument dissappear in the first place?
Rebooting the PC did not help. Basic troubleshooting did not resolve the issue. This is not the first time I work with NI MAX and with network instruments; however, this is the first time I see them dissappear fromNI MAX.
I did not find anything while searching for posts for similar issues, so I do not know if anyone else has seen this. I did encounter a similar description for a bug that was supposidly fixed in MAX 5.4
Does anyone at NI have a clue at how to make NI MAX more solid with respect to network instruments?
Thanks,
RayR
Attachments:
badMAX.png ‏190 KB

Hello AK2DM,
I was just north of you last week in Sedona. Beautiful place. Our next trip in your area will take us to Phoenix. We'll have to get together.
There are no dependencies on any NI Services that I am aware of. A customer just reported a similar issue at their Penang CM site. They are now in a bit of a panic. I did not work on the code at that site, but 3 sites, 2 customers reporting the same issue??? That's not a coincidence. Something is wrong with MAX. The only way to recover is to import the configuration file within NI MAX. It was impossible to simply scan for the instrument to get MAX to communicate with the instrument, although the PC, that has NI MAX installed, is able to ping the instrument.
I may have seen a similar issue a few years ago with another client where we kept loosing the network communication, but gave up and switched to GPIB. At the time, we thought the network switches were causing issues and blamed it on the network. Today, I may think otherwise... I do not know what to investigate to verify why this is occurring. Strangely enough, these systems ran for a year before we started seeing the symptoms. I thought windoze upgrades was turned off... It may be related to some recent upgrade, because we only started seeing these unusual behaviors since November (?). I can't remember exactly when we first saw it. Late fall / early winter??
It is strange that you started seeing an odd behavior around the same time. Running windoze, right? I never liked windoze... Everyone should move to Linux/Unix/Solaris. LOL!

MAX does not detect my PXI-5122 and PXI-6551 cards in a PXI-1045 chassis.

I have been using a PC with MXI-3 to PXI-1045 chassis to develop LabView TestStand code. Things are fine on my development PC. [Software configuration report attached nireport_rich.txt].
I have a 2nd PC set aside to test my deployment packages. I installed a GPIB card and MXI-3 card in my deployment test PC, and loaded a bunch of hardware drivers. [Report attached nireport_depPC_0006.txt]
All the PXI cards are found just fine when my development PC is connected, but when I power up my deployment PC (with MXI-3 connected to the 1045 chassis) -- I can't import the development configuration [exported from development PC] because the deployment PC does not see the PXI-6551 DIO card in slot 6 [PXI6::10::INSTR] and the PXI-5122 card in slot 13 [PXI8::15::INSTR].
I keep reviewing the hardware driver versions installed, and the only small difference that I see at this point is that the deployment PC has a slightly older version of NI-Switch.
Anybody have any ideas of what I can try next? I'm out of ideas.
. . . . hmmm, can't seem to attach more than one file, so here's the software info on the deployment PC
NI Software Information:
CVI Run-Time 7.0.0.395
NI-DAQ 7.3.0f1
NI-DAQmx 7.3.1f0
NI Script Editor 1.1
NI-DMM 2.3.1
     Soft Front Panel 2.3.0
NI-FGEN 2.2.1
     FGEN Soft Front Panel 2.2
NI-488.2 Software 2.30
IVI Compliance Package 2.2 2.2
LabVIEW Run-Time 7.0
Measurement & Automation Explorer 3.1.1.3003
Measurement Studio 6.0
     For Visual Basic
          ActiveX User Interface 7.0.0.344
          ActiveX 3D Graph 7.0.0.344
          ActiveX DataSocket 4.2.2.1
NI-USI 1.0.2
NI-HSDIO 1.2.1.3
NI-HWS 1.2.2.0
NI-PAL Software 1.8.2.0
NI-SCOPE 2.7.0f5
     SCOPE Soft Front Panel 2.1.0
NI Spy 2.2.0.12
NI-SWITCH 2.30.49153
NI-TClk 1.2
TestStand 3.1
NI-VISA 3.2
     visa32.dll 3.2.0.19
     NiVisaServer.exe 3.2.0.19
     NIvisaic.exe 3.2.0.19
LabVIEW Run-Time 7.1

Hello Maggie,
Appreciate your assistance and reply.
The pxisys.ini and pxiesys.ini files are modified by me with referring to
1)PXI System Alliance PXI-2 SW spec,
2)PXI-6 SW spec,
and 3)pxisys.ini pxiesys.ini generated by MAX v5.3.0f0 with NI PXIe-1075 + NI PXIe-8133.
The content in pxisys.ini/pxiesys.ini generated by MAX looks like simple. Consequently, I modified and checked it line by line according to actual hardware of PXES-2590+PXIe-3975. Then, MAX just list devices as described in the first post. I tried to find the root cause but in vain.
Is this minor issue can be related any incorrect tag lines in pxisys.ini or pxiesys.ini I posted?
Is any suggestion tests I can do to troubleshoot root cause?
Looking forward your reply.
Cheers,
KL Tseng

Cannot see PCI firewire card in MAX

Hi
I have a firewire camera connected to my computer via a PCI card. Using the software that came with the camera, I am able to capture images easily so there is clearly no hardware problem. However, I cannot seem to access the camera using MAX. If I go to the configuration tree and select My System > Devices and interfaces, all I see is PXI system (Unidentified) and Serial and Parallel. ie. I do not see NI-IMAXdx. If I select Software, I see all of the following on the list (and more) NI Vision, NI-IMAQ, NI-IMAQ for 1394, NI-IMAQdx.
Many thanks,
Gary

Hi,
Without wanting to just throw links at you, have a look at this KB and try the suggestion; otherwise post back!
Regards,
Tom
Applications Engineering, NI UK

NI Scope Sorf Front Panel will not detect NI PXI-5122

Hello,
I am trying to use NI Scope Soft Front Panel 2.7f0 to acquire simple waveforms;
however it will not detect my NI PXI-5122. I have confirmed that the digitizer
works under MAX 4.2.1 and can see waveforms under the test panel. I have
installed NI Scope 3.3.1 on my machine and have updated the driver on the PXI
to version 3.3.1. Any ideas on what is wrong?
~Buck

It is unclear from your post whether or not the 5122 is on the same physical device as you are running the soft front panel (SFP). The SFP only works on local devices. It does not have the capability to attach to RT or remote systems (MAX does). However, if you are running Windows on your PXI controller or are using MXI to control the chassis, there is another issue.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

Hi,
I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one.
My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside
of screen and my machine was Turkish Win XP Home edition. Than I reformat and change into English version of WinXP that comes with in Toshiba recovery CD. But I lost the screen menu for DVD I guess. Now ı don't know how to re-install that option.
Plus my machine is use the Intel Centrino 1.7 but I am not sure if this is a dual proccess. Secondly the ram is 512MB and I am trying to buy 2GB extened ram but seems still very very expensive (around $1100) Why is that 2GB ram so expensive?
I am using my laptop for software engineering as well as using Macromedia flash and Adobe Photoshop.
The both application and MS VS.NET 2005 as well as SQL Server 2000 and SQL Server 2005 application are very slow and sometime it takes more than 30
min. to compile or open it.
I have my home PC P4 3.2G with 1GB ram and it's faster than my Toshibe laptop.
Please be patien with me, after a 5 years later I bought my second laptop and first one was notebook from another manufacture.
I search in the internet and I find the M70-340 with Turkish Q type keyboard was the best option and it cost me $1450.
All I need how to overcome my problem and I need someone from Toshiba to explained to me carefully.
Can someone read my post and answer my question and worries?
I thank you very much and I looking forward to receive some help.
Kind Regards,
NTMS2006

Hello
I dont want to disappoint you but please dont expect someone from Toshiba will write to you because this is user-to-user forum. I will try to write some comments because I have the same unit as you.
This DVD shortcut is really not understandable for me and I really dont know what you are writing about. If the DVD drive is recognized and installed properly it should be listed in device manager and also shown in Windows explorer. If you want to discus about it please describe exact status of DVD drive in device manager and Windows explorer.
You are right about memory. This notebook is delivered with 512 MB Ram. According the notebook specification it can handle max with 2GB of Ram and if you want to use max please use 2x1GB module. Compatible one is DDR2-400/533 1GB (PA3411U-1M1G).
2GB modules are the newest and everything new is very expensive. I dont know how much it can costs but definitely not around $1100. For this money you can buy the whole notebook.
The list of used software is impressive and I am not wondering if the notebook runs slow. Upgrade it to max Ram and it will be much faster. Please dont compare your desktop with this mobile unit.
Pick up info how much costs PA3411U-1M1G memory module and use two of them for max RAM. You will see that unit will run faster and I hope you will be satisfied with performance.
Have a nice day!

Why is it when I convert a Keynote show into HTML, PC users cannot see it properly? Using latest OS and Keynote versions.

Why is it when I convert a keynote show into HTML, PC users cannot see it properly on their computers?

JohnRobertBrown wrote:
It looks perfect using Google Chrome on my Mac. But doesn't work well on Explorer on a PC. It seems to be way off center.
There is never any guarantee that automatically generated html will look right on every browser, especially Explorer. For max compatibility with MS stuff it's best to use Office to start with instead of iWorks.
I don't know whether you could manually edit the Keynote html to make it work better with Explorer. It would be interesting to know whether it looks right in Windows Safari, Chrome, or FireFox so you could know whether only IE does it wrong.

PXIe-5122 continuous stream 2 channels to disk with 100MS/s

Hey,
I am currently trying to find a way to stream 2 channels to disk with 100MS/s with my PXIe-5122. According to the product specification, the card should be able to do this.
Unfortunately, I have'nt seen any programs.
What I have are two loops, one for the DAQ and one to empty the onboard memory using a queue and writing the fetched waveform data into a tdms file. I keep obtaining the error, that samples in the onboard memory are overwritten... therefore, the VI doesn't empty the onboard memory in sufficient speed.
Does anybody know how I could solve this problem? Or does anybody have a program?
Thanks for the help!

Hi lehrm,
you are writing about that you didn#t see any application for the 5122. If you mean examples, there are a lot of examples installed on your system when you install the driver sw for the device. eg. there is an example called niScope EX Stream to Disk, that seems to be interesting for your issue
Examples are available in the Example Finder of LabVIEW, in the folder: "Hardware Input and Output" -> "Modular Instruments" -> NI-SCOPE (High Speed Digitizer)" -> "Continious Acquisition".
This can give you first ideas!
Kind regards
Tobias S.

Cannot see buddy in iChat, they see and hear me fine

Using OS 10.5.7
iChat 4.0.8
Cannot see AIM user (AIM v6.8.14.6, who is on a PC) using iChat when I initiate the session. They see me fine; I only see myself on my iMac.
I am running Perian 1.1.2 (not 1.1.3; I read the previous threads on this issue).
When the AIM user on a PC initiates the session, there is a connection error on my end (I have pasted the details below).
I've read through a ton of related postings on this topic and nothing seems to work. It worked back in January, but never since. VERY frustrating.
Could use some insight. We use this so our son can chat with Grandma and Grandpa.
Error text:
Date/Time: 2009-05-24 15:07:57.883 -0400
OS Version: 10.5.7 (Build 9J61)
Report Version: 4
iChat Connection Log:
2009-05-24 15:07:36 -0400: AVChat started with ID 0.
2009-05-24 15:07:36 -0400: 0x19064a60: State change from AVChatNoState to AVChatStateWaiting.
2009-05-24 15:07:36 -0400: wamhoffb: State change from AVChatNoState to AVChatStateInvited.
2009-05-24 15:07:47 -0400: 0x19064a60: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-05-24 15:07:47 -0400: wamhoffb: State change from AVChatStateInvited to AVChatStateConnecting.
2009-05-24 15:07:51 -0400: 0x19064a60: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-24 15:07:51 -0400: 0x19064a60: Error -8 (Did not receive a response from 0x19064a60.)
2009-05-24 15:07:51 -0400: wamhoffb: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-24 15:07:51 -0400: wamhoffb: Error -8 (Did not receive a response from 0x19064a60.)
Video Conference Error Report:
14.938474 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
11.938972 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:5061 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0f09758c2f7594e1
Max-Forwards: 70
To: "u0" <sip:user@rip:5061>
From: "0" <sip:user@lip:16402>;tag=1782088158
Call-ID: 2bf73c00-4896-11de-a34c-e24fea1f4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Wamhoff 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2660
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:2056103665
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:648799698
12.103214 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 100 Trying
From: "0" <sip:user@lip:16402>;tag=1782088158
To: "u0" <sip:user@rip:5061>
Call-Id: 2bf73c00-4896-11de-a34c-e24fea1f4012@lip
Cseq: 1 INVITE
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0f09758c2f7594e1
Contact: sip:rip:5061
Content-Length: 0
16.312734 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 180 Ringing
From: "0" <sip:user@lip:16402>;tag=1782088158
To: "u0" <sip:user@rip:5061>;tag=19381
Call-Id: 2bf73c00-4896-11de-a34c-e24fea1f4012@lip
Cseq: 1 INVITE
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0f09758c2f7594e1
Contact: sip:rip:5061
User-Agent: COOL/5.2.3.5972 SIPxua/2.10.1.3820 (WinNT)
Supported: replaces
Content-Length: 0
19.649294 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
From: "0" <sip:user@lip:16402>;tag=1782088158
To: "u0" <sip:user@rip:5061>;tag=19381
Call-Id: 2bf73c00-4896-11de-a34c-e24fea1f4012@lip
Cseq: 1 INVITE
Contact: "u0"<sip:user@rip:5061>
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0f09758c2f7594e1
Content-Type: application/sdp
Content-Length: 283
User-Agent: COOL/5.2.3.5972 SIPxua/2.10.1.3820 (WinNT)
Supported: replaces
[v=0
o=sipX 5 5 IN IP4 rip
s=call
t=0 0
m=audio 16384 RTP/AVP 3 0
c=IN IP4 rip
a=rtpmap:3 gsm/8000/1
a=rtpmap:0 pcmu/8000/1
m=video 16386 RTP/AVP 34
c=IN IP4 rip
a=rtpmap:34 h263/90000/1
a=fmtp:34 imagesize 1 rules 15:352:288
a=framerate:15
20.371265 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
From: "0" <sip:user@lip:16402>;tag=1782088158
To: "u0" <sip:user@rip:5061>;tag=19381
Call-Id: 2bf73c00-4896-11de-a34c-e24fea1f4012@lip
Cseq: 1 INVITE
Contact: "u0"<sip:user@rip:5061>
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0f09758c2f7594e1
Content-Type: application/sdp
Content-Length: 283
User-Agent: COOL/5.2.3.5972 SIPxua/2.10.1.3820 (WinNT)
Supported: replaces
[v=0
o=sipX 5 5 IN IP4 rip
s=call
t=0 0
m=audio 16384 RTP/AVP 3 0
c=IN IP4 rip
a=rtpmap:3 gsm/8000/1
a=rtpmap:0 pcmu/8000/1
m=video 16386 RTP/AVP 34
c=IN IP4 rip
a=rtpmap:34 h263/90000/1
a=fmtp:34 imagesize 1 rules 15:352:288
a=framerate:15
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
10.718991 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
11.932462 @Video Conference/VideoConferenceMultiController.m:1507 type=5 (00000000/0)
[Initiate Conference To User Cert Version: u0 with 40 bytes of connection data.
Binary Images Description for "iChat":
0x1000 - 0x23cfff com.apple.iChat 4.0.8 (619) /Applications/iChat.app/Contents/MacOS/iChat
0x2b1000 - 0x325fff com.apple.Bluetooth 2.1.6 (2.1.6f8) /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x373000 - 0x4cefff com.apple.viceroy.framework 363.37 /System/Library/PrivateFrameworks/VideoConference.framework/Versions/A/VideoCon ference
0x53e000 - 0x57dfff com.apple.vmutils 4.1 (104) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x59f000 - 0x5b8fff com.apple.frameworks.preferencepanes 12.2 /System/Library/Frameworks/PreferencePanes.framework/Versions/A/PreferencePanes
0x5d2000 - 0x60cfff com.apple.remotedesktop.screensharing 1.0.2 /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing
0x61c000 - 0x630fff com.apple.ScreenSaver 2.2 /System/Library/Frameworks/ScreenSaver.framework/Versions/A/ScreenSaver
0x641000 - 0x65ffff libexpat.1.dylib /usr/lib/libexpat.1.dylib
0x667000 - 0x699fff com.apple.iChatCommonGUI 4.0.8 (619) /System/Library/PrivateFrameworks/iChatCommonGUI.framework/iChatCommonGUI
0x6c4000 - 0x6c6fff com.apple.BezelServicesFW 1.4.929 /System/Library/PrivateFrameworks/BezelServices.framework/Versions/A/BezelServi ces
0x6eb000 - 0x6f0fff com.apple.iChat.Styles.Balloons 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Balloons.transcriptstyle/Contents/MacO S/Balloons
0x11a0e000 - 0x11a11fff com.apple.iChat.Styles.Boxes 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Boxes.transcriptstyle/Contents/MacOS/B oxes
0x11a18000 - 0x11a1efff com.apple.iChat.Styles.Compact 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Compact.transcriptstyle/Contents/MacOS /Compact
0x11a26000 - 0x11a28fff com.apple.iChat.Styles.Text 4.0.8 (619) /Applications/iChat.app/Contents/PlugIns/Text.transcriptstyle/Contents/MacOS/Te xt
0x14815000 - 0x14a0dfff com.apple.RawCamera.bundle 2.0.14 (436) /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x15cfc000 - 0x15d01fff com.apple.CoreGraphics 1.409.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
0x163b2000 - 0x163edfff com.apple.QuickTimeFireWireDV.component 7.6 (1290) /System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/MacOS/QuickTim eFireWireDV
0x16448000 - 0x164b5fff com.DivXInc.DivXDecoder 6.6.0 /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
0x164c4000 - 0x164cdfff com.apple.IOFWDVComponents 1.9.5 /System/Library/Components/IOFWDVComponents.component/Contents/MacOS/IOFWDVComp onents
0x164d7000 - 0x16505fff com.apple.QuickTimeIIDCDigitizer 7.6 (1290) /System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/MacOS/Quick TimeIIDCDigitizer
0x16517000 - 0x16565fff com.apple.QuickTimeUSBVDCDigitizer 2.2.6 /System/Library/QuickTime/QuickTimeUSBVDCDigitizer.component/Contents/MacOS/Qui ckTimeUSBVDCDigitizer
0x16573000 - 0x16576fff com.apple.audio.AudioIPCPlugIn 1.0.6 /System/Library/Extensions/AudioIPCDriver.kext/Contents/Resources/AudioIPCPlugI n.bundle/Contents/MacOS/AudioIPCPlugIn
0x1657c000 - 0x16581fff com.apple.audio.AppleHDAHALPlugIn 1.6.8 (1.6.8a3) /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bun dle/Contents/MacOS/AppleHDAHALPlugIn
0x16586000 - 0x1670bfff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x16739000 - 0x16a17fff com.apple.ATIRadeonX2000GLDriver 1.5.44 (5.4.4) /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle/Contents/MacOS/ATIRade onX2000GLDriver
0x16a7b000 - 0x16a97fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloa t.bundle/GLRendererFloat
0x17c3f000 - 0x17e0bfff com.apple.audio.codecs.Components 1.6.5 /System/Library/Components/AudioCodecs.component/Contents/MacOS/AudioCodecs
0x18f18000 - 0x18f1bfff com.apple.iokit.IOQTComponents 1.6 /System/Library/Components/IOQTComponents.component/Contents/MacOS/IOQTComponen ts
0x199a4000 - 0x199c0fff com.apple.QuartzComposer.ExtraPatches 2.1 (106.13) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/Resources/ExtraPatches.plugin/Contents/MacOS/ExtraPatches
0x199d2000 - 0x199effff com.apple.audio.midi.CoreMIDI 1.6.1 (42) /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0x19a07000 - 0x19a14fff com.apple.QuartzComposer.Backdrops 1.1 /System/Library/Graphics/Quartz Composer Patches/Backdrops.plugin/Contents/MacOS/Backdrops
0x8fe00000 - 0x8fe2dfff dyld /usr/lib/dyld
0x90003000 - 0x9004dfff com.apple.securityinterface 3.0.2 (36684) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x9004e000 - 0x9004efff com.apple.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x9004f000 - 0x90520fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x90521000 - 0x90525fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x90526000 - 0x907a2fff com.apple.Foundation 6.5.8 (677.24) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x907a3000 - 0x907cbfff com.apple.shortcut 1.0.1 (1.0) /System/Library/PrivateFrameworks/Shortcut.framework/Versions/A/Shortcut
0x90930000 - 0x9093efff libz.1.dylib /usr/lib/libz.1.dylib
0x9093f000 - 0x90946fff com.apple.agl 3.0.9 (AGL-3.0.9) /System/Library/Frameworks/AGL.framework/Versions/A/AGL
0x9094c000 - 0x9099dfff com.apple.framework.familycontrols 1.0.4 /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x9099e000 - 0x909c2fff libxslt.1.dylib /usr/lib/libxslt.1.dylib
0x909cf000 - 0x90a9dfff com.apple.JavaScriptCore 5525.26 (5525.26.2) /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x90a9e000 - 0x90b65fff com.apple.vImage 3.0 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x90b66000 - 0x90b6dfff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90b6e000 - 0x90b75fff libbsm.dylib /usr/lib/libbsm.dylib
0x90b76000 - 0x90b8efff com.apple.openscripting 1.2.8 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x90b8f000 - 0x90c1bfff com.apple.framework.IOKit 1.5.2 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c1c000 - 0x90c1cfff com.apple.Carbon 136 /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x90c1d000 - 0x90c57fff com.apple.securityfoundation 3.0.2 (36131) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x90cc6000 - 0x90d36fff com.apple.iLifeMediaBrowser 2.0.2 (321) /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x90d37000 - 0x90d69fff com.apple.LDAPFramework 1.4.5 (110) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x90d6a000 - 0x90e11fff com.apple.QD 3.11.56 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x90e15000 - 0x90f4dfff com.apple.imageKit 1.0.2 (1.0) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x90f4e000 - 0x90f59fff com.apple.CoreGraphics 1.409.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x90f5a000 - 0x90fb7fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90fb8000 - 0x90fbdfff com.apple.CommonPanels 1.2.4 (85) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x90fbe000 - 0x90fcdfff com.apple.DSObjCWrappers.Framework 1.2.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x90fce000 - 0x910cffff com.apple.PubSub 1.0.3 (65.1.4) /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
0x910d0000 - 0x910d0fff com.apple.quartzframework 1.5 /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x910d1000 - 0x910f0fff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x910f7000 - 0x91176fff com.apple.SearchKit 1.2.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x91177000 - 0x91194fff com.apple.QuickLookFramework 1.3.1 (170.9) /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x91195000 - 0x91993fff com.apple.AppKit 6.5.7 (949.46) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x91994000 - 0x919a5fff com.apple.CFOpenDirectory 10.5 /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/Frameworks /CFOpenDirectory.framework/Versions/A/CFOpenDirectory
0x919e3000 - 0x91d80fff com.apple.QuartzCore 1.5.8 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x91d81000 - 0x91d8efff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x91d8f000 - 0x91e19fff com.apple.DesktopServices 1.4.8 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x91e1a000 - 0x91e26fff com.apple.helpdata 1.0.1 (14.2) /System/Library/PrivateFrameworks/HelpData.framework/Versions/A/HelpData
0x91e27000 - 0x91e69fff com.apple.NavigationServices 3.5.2 (163) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x91e6a000 - 0x91ef1fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x91ef2000 - 0x91f28fff libtidy.A.dylib /usr/lib/libtidy.A.dylib
0x91f29000 - 0x91f78fff com.apple.QuickLookUIFramework 1.3.1 (170.9) /System/Library/PrivateFrameworks/QuickLookUI.framework/Versions/A/QuickLookUI
0x91f79000 - 0x92059fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x9205a000 - 0x9205afff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x9205b000 - 0x9207ffff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x92080000 - 0x9209efff com.apple.DirectoryService.Framework 3.5.6 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x9209f000 - 0x92143fff com.apple.CFNetwork 438.10 (438.12) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x92144000 - 0x922abfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x922ac000 - 0x922e3fff com.apple.SystemConfiguration 1.9.2 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x922e4000 - 0x92311fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x92312000 - 0x9232efff com.apple.IMFramework 4.0.8 (584) /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
0x9233c000 - 0x9246ffff com.apple.CoreFoundation 6.5.6 (476.18) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x92470000 - 0x924cafff com.apple.CoreText 2.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x924cb000 - 0x924fcfff com.apple.quartzfilters 1.5.0 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x924fd000 - 0x92577fff com.apple.print.framework.PrintCore 5.5.4 (245.6) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x92578000 - 0x925d1fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x925d2000 - 0x925d2fff com.apple.ApplicationServices 34 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x925d3000 - 0x926bbfff com.apple.CoreData 100.2 (186.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x926bc000 - 0x926fbfff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x926fc000 - 0x92702fff com.apple.print.framework.Print 218.0.3 (220.2) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x92703000 - 0x92719fff com.apple.DictionaryServices 1.0.0 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x9271a000 - 0x92763fff com.apple.Metadata 10.5.2 (398.25) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x92764000 - 0x92b22fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92b23000 - 0x92baffff com.apple.LaunchServices 290.3 (290.6) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x92bb0000 - 0x92bdbfff libauto.dylib /usr/lib/libauto.dylib
0x92bdc000 - 0x92bdffff com.apple.help 1.1 (36) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x92be0000 - 0x92c31fff com.apple.HIServices 1.7.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92c32000 - 0x92f3afff com.apple.HIToolbox 1.5.5 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92f3b000 - 0x92f89fff com.apple.datadetectorscore 1.0.2 (52.14) /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x92f8a000 - 0x930d0fff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x930d1000 - 0x930d2fff libffi.dylib /usr/lib/libffi.dylib
0x930d3000 - 0x930e8fff com.apple.ImageCapture 5.0.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x930e9000 - 0x93100fff com.apple.datadetectors 1.0.1 (66.2) /System/Library/PrivateFrameworks/DataDetectors.framework/Versions/A/DataDetect ors
0x93101000 - 0x93194fff com.apple.ink.framework 101.3 (86) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x93195000 - 0x93199fff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x93408000 - 0x935c4fff com.apple.QuartzComposer 2.1 (106.13) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x935c5000 - 0x93717fff com.apple.audio.toolbox.AudioToolbox 1.5.2 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x93718000 - 0x946f3fff com.apple.QuickTimeComponents.component 7.6 (1290) /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
0x946f4000 - 0x947b2fff com.apple.WebKit 5525.28 (5525.28.3) /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x947b3000 - 0x94941fff com.apple.CoreAUC 3.07.2 /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
0x94942000 - 0x94d52fff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x94d53000 - 0x94df6fff com.apple.QuickTimeImporters.component 7.6 (1290) /System/Library/QuickTime/QuickTimeImporters.component/Contents/MacOS/QuickTime Importers
0x94df7000 - 0x94e12fff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x94e13000 - 0x94e57fff com.apple.DirectoryService.PasswordServerFramework 3.0.3 /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x94e58000 - 0x94e99fff com.apple.CoreGraphics 1.409.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x94e9a000 - 0x94fd3fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x94fd4000 - 0x94fd4fff com.apple.Cocoa 6.5 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x94fd5000 - 0x94fe8fff com.apple.IMUtils 4.0.8 (584) /System/Library/Frameworks/InstantMessage.framework/Frameworks/IMUtils.framewor k/Versions/A/IMUtils
0x94fe9000 - 0x94feefff com.apple.DisplayServicesFW 2.0.2 /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x94fef000 - 0x950d0fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x950d1000 - 0x950d1fff com.apple.CoreServices 32 /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x950d2000 - 0x953f7fff com.apple.QuickTime 7.6.0 (1290) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x953f8000 - 0x95402fff com.apple.audio.SoundManager 3.9.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x95403000 - 0x95408fff com.apple.backup.framework 1.0 /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x95409000 - 0x95409fff com.apple.Accelerate 1.4.2 (Accelerate 1.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x9540a000 - 0x95413fff com.apple.speech.recognition.framework 3.7.24 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x95414000 - 0x95416fff com.apple.CrashReporterSupport 10.5.7 (161) /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x95417000 - 0x95440fff com.apple.CoreMediaPrivate 15.0 /System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CoreMed iaPrivate
0x95441000 - 0x95441fff com.apple.audio.units.AudioUnit 1.5 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x95442000 - 0x95442fff com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks/InstallServer.framework/Versions/A/InstallSer ver
0x95443000 - 0x9546cfff libcups.2.dylib /usr/lib/libcups.2.dylib
0x95477000 - 0x95527fff edu.mit.Kerberos 6.0.13 /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x95528000 - 0x955dffff com.apple.QTKit 7.6 (1290) /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x955e0000 - 0x955f8fff com.apple.CoreVideo 1.6.0 (20.0) /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x955f9000 - 0x95605fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x95606000 - 0x95683fff com.apple.audio.CoreAudio 3.1.2 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x956b9000 - 0x956f7fff com.apple.opengl 1.5.10 /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x956f8000 - 0x95700fff com.apple.DiskArbitration 2.2.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x95701000 - 0x95703fff com.apple.ImageIO.framework 2.0.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x95704000 - 0x95760fff com.apple.htmlrendering 68 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x95761000 - 0x957f4fff com.apple.ApplicationServices.ATS 3.7 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x957f5000 - 0x9582ffff com.apple.coreui 1.2 (62) /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x95830000 - 0x95840fff com.apple.speech.synthesis.framework 3.7.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x95841000 - 0x95851fff com.apple.LangAnalysis 1.6.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x95852000 - 0x9591dfff com.apple.ColorSync 4.5.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x9591e000 - 0x95f6ffff com.apple.WebCore 5525.28 (5525.28.4) /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x95f70000 - 0x96022fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x96023000 - 0x96062fff com.apple.CoreMediaIOServicesPrivate 15.0 /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
0x96063000 - 0x96065fff com.apple.securityhi 3.0 (30817) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x96148000 - 0x96166fff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x96167000 - 0x9616efff com.apple.CoreGraphics 1.409.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x96361000 - 0x96370fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
0x96371000 - 0x963a0fff com.apple.AE 402.3 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x963a1000 - 0x96572fff com.apple.security 5.0.5 (36371) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x96573000 - 0x96577fff com.apple.OpenDirectory 10.5 /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/OpenDirect ory
0x96578000 - 0x96578fff com.apple.MonitorPanelFramework 1.2.0 /System/Library/PrivateFrameworks/MonitorPanel.framework/Versions/A/MonitorPane l
0x965a9000 - 0x9661bfff com.apple.PDFKit 2.1.2 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x9661c000 - 0x968f6fff com.apple.CoreServices.CarbonCore 786.11 (786.13) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x968f7000 - 0x96a76fff com.apple.AddressBook.framework 4.1.2 (700) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x96a77000 - 0x96b31fff com.apple.CoreServices.OSServices 227 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x96b32000 - 0x96baffff com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x96bb0000 - 0x96c16fff com.apple.ISSupport 1.8 (38.3) /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x96c17000 - 0x972b7fff com.apple.CoreGraphics 1.409.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics

Ralph, thanks for the advice, that did not work. Perian is NOT set to "update". This is so bizzare. In Yahoo Messenger and Gmail video we can see each other. The problem with Gmail is that it crashes and is very delayed and Yahoo messenger does not allow for audio chat. We had this working in iChat to AIM in late December and then on Jan 3, it stopped. They can see and hear me, I can't see our hear them. When it was working in iChat to AIM, it was beautiful! When I do iChat to iChat with colleagues, no issues, works perfectly. So, I don;t think its my router. Any thoughts? Thanks so much my man.
Brian

Re-arming trigger time with pxi-5122

Hi all!
this is my first discussion in this forum so I'm not sure it's the right place to post it, because i'm using LabView but maybe it is an hardware problem.
So... I have a problem to calculate the re-arm trigger time for the pxi 5122.
From the data sheets I read that it should be about 3 us with the tdc off or 12 us if on.
But I needed an accurate measure of the dead time following each record measured so i decided to find it by myself...
Using an acquisition program I have previous written in LabView, I started single acquisitions of 10000 records and each record is composed of 128 samples; as signal I used square waves with different frequencies, of 10 volts peak-to-peak (my trigger was set on the first channel of 5122 with 1 volt of edge value).
First acquisition: 50 kHz wave. Theoretically I need 0.2 s to capture 10000 records without loosing any signals from the square wave. Choosing an acquisition time for a single record of 15.3 us, I found that the time required was 0.199998 s, very similar to the expected one.
Then choosing an acquisition time for a single record of 15.4 us, I found about 0.4 s.
I can guess that in this second case one every two wave peaks goes lost so I required twice the time to capture 10000 records.
Because a wave period is 20 us I have calculated a dead time of 20 - 15.3 = 4.7 us.
It wasn't as the 3 us described for the 5122 but i wasn't impressed and i went on with my try.
Second wave: 20 kHz. I need 0.5 s to capture 10000 records without loosing signals from the square waves.
What i found was that in this case, choosing an acquisition time for a single record of 39.6 us I required 0,5 s to capture all the peaks, while with 39.7 us I required about 1 second, again twice the time.
As the previous example I have calculated the dead time: 50 - 39.6 = 10.4 us.
Very strange... the dead time I supposed being the rearming trigger (and so fixed) was different for the 2 cases.
Trying with others waves lenghts, values were always different.
This happen also fixing the frequency of the square wave and changing the number of samples per record.
For example, with 128 samples per records as I said before I needed a measure time of about 15.3 us to collect all the consecutive peaks, while with 64 samples I needed 12,8 us and so on.
So it seems to be a dependency between the dead time after a records ( the rearming trigger? now i'm not so sure if I can call so) and the sampling frequency of the pxi 5122.
But I don't know why the DAQ behave in this way.
Is it right? Rearm time should be fixed,shouldn't it?
I know it required a bit of time to read my problem but i tried to be more accurate I could.
Thank you in advance.
Giacomo
Solved!
Go to Solution.

Just as with full blown oscope, the cannot select a timing period between the scales shown on the front panel. For example, the horizontal setting is labled 1us, 2us, 5us, etc. You cannot select 2.5us. Here is an excerpt from the PXI-5122 spec manual triggering section:
Divide by
n decimation available where 1<n<65,535
For more information about Sample Clock and decimation, refer to the NI High-Speed Digitizers Help.
What this means is that when you change from 15.3us to 15.4us, the scope changes timing ranges. That is why it takes twice as long to acquire the samples.
- tbob
Inventor of the WORM Global

N1K Nexus1000v VSM Cannot See VEM

Hello,
We are installing a N1K 4.2(1)SV1(5.1)   and for this purpose installed VSM on a Seperate DataCenter Vsphere 5 Cluster onto a blank ESX host. Our problem is that VSM and VEM cannot see each other. What step may we missing?
Thanks in Advance,
Best Regards,
We followed the Installation and Getting started guides:
Cisco Nexus 1000V Installation and Upgrade Guide, Release 4.2(1)SV1(5.1)
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/install_upgrade/vsm_vem/guide/n1000v_installupgrade.html
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4_a/getting_started/configuration/guide/n1000v_gsg.html
from other Discussions we understand that something must be missing with respect to "Control Vlan" which will provide L2 communication between VSM and VEM.
show svs connection shows that vcenter recognizes the VSM
vem status on the ESX host shows the VEM as ok
management, control and packet vlans are same vlan
show module sees only the active and ha-standby vsms, but no vem exists.
show module vem mapping indicates that somehow VSM recognizes the VEM, if the VEM 3 is absent, how could it be seen by VSM once?
One point to note is VSM and VEM are on the same host, can this be a difference between usual configuration? Will test a case when VSM and VEM are on seperate ESX hosts.
if we put Vmware dVS instead of N1K and put a host on this Control Vlan, it may ping to other vlans, and the VMs for port-profiles can communicate to the outside world,
We don't think this is a licensing problem because by default 16 CPUs are on the VSM, and it did not change after the licens is installed.
show module vem mapping
Mod     Status          UUID                                    License Status
3       absent          34343335-3237-4742-3838-346337417236    unlicensed

Hello,
I am having the exact same problem as Canero with the same software version. My setup is as follows:
1. L3 mode with VSM and VEM on different subnets/hosts
2. With the same set of port profiles and UCS service profile cloned, I have one host showing up in VSM and another not showing up. In my view, this rule out mis-configuration in
a. system vlan on veth port profile
b. vlan configuration in upstream switch and UCS fabric interconnect
3. Sometimes, the VEM did managed to show up but can drop without any reason
4. Sniffer trace indicates that there are bi-directional traffic between VSM and VEM
5. show logging logfile has the following error:
2012 Apr 24 15:21:47 VSM-PROD %VMS-5-DVS_HOSTMEMBER_INFO: A host with name=[172.16.105.131] and uuid=[a7f30c6a-6eb0-11e1-2000-000000000006] is added to the dvs. The host is not found as a module in the VSM configuration.
6. Opaque Data in VC shows the following:
"data-version 1.0
switch-domain 200
switch-name VSM-PROD
cp-version 4.2(1)SV1(5.1)
control-vlan 1
system-primary-mac 00:50:56:ab:44:01
active-vsm packet mac 00:50:56:ab:44:03
active-vsm mgmt mac 00:50:56:ab:44:02
standby-vsm ctrl mac 0050-56ab-4404
inband-vlan 1
svs-mode L3
l3control-ipaddr 192.168.1.200
upgrade state 0 mac 0050-56ab-4404 l3control-ipv4 null
profile dvportgroup-149 trunk 105-106,109,111
profile dvportgroup-149 mtu 1500
profile dvportgroup-151 access 105
profile dvportgroup-151 mtu 1500
profile dvportgroup-152 access 106
profile dvportgroup-152 mtu 1500
profile dvportgroup-155 access 111
profile dvportgroup-155 mtu 1500
profile dvportgroup-155 capability l3control
profile dvportgroup-161 access 109
profile dvportgroup-161 mtu 1500
end-version 1.0
In VSM:
VSM-PROD# sh svs domain
SVS domain config:
Domain id:    200
Control vlan: 1
Packet vlan: 1
L2/L3 Control mode: L3
L3 control interface: mgmt0
Status: Config push to VC successful.
VSM-PROD# sh mod vem missing
Mod Server-IP        Server-UUID                           Server-Name
4    172.16.105.31    a7f30c6a-6eb0-11e1-2000-000000000007 NA
5    172.16.105.131   a7f30c6a-6eb0-11e1-2000-000000000006 NA
VSM-PROD# sh mod vem map
Mod     Status          UUID                                    License Status
3       powered-up      a7f30c6a-6eb0-11e1-2000-000000000008    licensed
4       absent          a7f30c6a-6eb0-11e1-2000-000000000007    n/a
5       absent          a7f30c6a-6eb0-11e1-2000-000000000006    n/a
In host:
Below is "show run"
VSM-PROD# sh run
!Command: show running-config
!Time: Tue Apr 24 16:34:38 2012
version 4.2(1)SV1(5.1)
feature telnet
username admin password 5 $1$oCIIPBun$l0pIWvJ/OeQ3mNSY38OTG0 role network-admin
banner motd #Nexus 1000v Switch#
ssh key rsa 2048
ip domain-lookup
hostname VSM-PROD
vem 3
host vmware id a7f30c6a-6eb0-11e1-2000-000000000008
vem 4
host vmware id a7f30c6a-6eb0-11e1-2000-000000000007
vem 5
host vmware id a7f30c6a-6eb0-11e1-2000-000000000006
snmp-server user admin network-admin auth md5 0xd86407e6438a2a6179f6581e7d378d4b priv 0xd86407e6438a2a6179f6581
e7d378d4b localizedkey
vrf context management
ip route 0.0.0.0/0 192.168.1.1
vlan 1,100-103,105-106,109,111-112,200
vlan 1,100-103,105-106,109,111-112,200
port-channel load-balance ethernet source-mac
port-profile default max-ports 32
port-profile type ethernet Unused_Or_Quarantine_Uplink
vmware port-group
shutdown
description Port-group created for Nexus1000V internal usage. Do not use.
state enabled
port-profile type vethernet Unused_Or_Quarantine_Veth
vmware port-group
shutdown
description Port-group created for Nexus1000V internal usage. Do not use.
state enabled
port-profile type vethernet storage
vmware port-group
switchport mode access
switchport access vlan 109
no shutdown
system vlan 109
state enabled
port-profile type ethernet n1kv-uplink
vmware port-group
switchport mode trunk
switchport trunk allowed vlan 105-106,109,111-112
channel-group auto mode on mac-pinning
no shutdown
system vlan 105-106,109,111
state enabled
port-profile type vethernet vm
vmware port-group
switchport mode access
switchport access vlan 112
no shutdown
state enabled
port-profile type vethernet esx_mgmt
vmware port-group
switchport mode access
switchport access vlan 105
no shutdown
system vlan 105
state enabled
port-profile type vethernet esx_vmotion
vmware port-group
switchport mode access
switchport access vlan 106
no shutdown
system vlan 106
state enabled
port-profile type vethernet n1kv-L3-dmz
capability l3control
vmware port-group
switchport mode access
switchport access vlan 111
no shutdown
system vlan 111
state enabled
vdc VSM-PROD id 1
limit-resource vlan minimum 16 maximum 2049
limit-resource monitor-session minimum 0 maximum 2
limit-resource vrf minimum 16 maximum 8192
limit-resource port-channel minimum 0 maximum 768
limit-resource u4route-mem minimum 1 maximum 1
limit-resource u6route-mem minimum 1 maximum 1
limit-resource m4route-mem minimum 58 maximum 58
limit-resource m6route-mem minimum 8 maximum 8
interface port-channel1
inherit port-profile n1kv-uplink
vem 3
interface mgmt0
ip address 192.168.1.200/24
interface Vethernet1
inherit port-profile esx_mgmt
description VMware VMkernel, vmk0
vmware dvport 320 dvswitch uuid "a5 5d 2b 50 90 f4 f8 5a-7e 21 8b 8e f9 62 6e d2"
vmware vm mac 0025.B500.A008
interface Vethernet2
inherit port-profile n1kv-L3-dmz
description VMware VMkernel, vmk2
vmware dvport 480 dvswitch uuid "a5 5d 2b 50 90 f4 f8 5a-7e 21 8b 8e f9 62 6e d2"
vmware vm mac 0050.5672.4908
interface Vethernet4
inherit port-profile esx_vmotion
description VMware VMkernel, vmk3
vmware dvport 352 dvswitch uuid "a5 5d 2b 50 90 f4 f8 5a-7e 21 8b 8e f9 62 6e d2"
vmware vm mac 0050.567B.E4B6
interface Vethernet7
inherit port-profile storage
description VMware VMkernel, vmk1
vmware dvport 577 dvswitch uuid "a5 5d 2b 50 90 f4 f8 5a-7e 21 8b 8e f9 62 6e d2"
vmware vm mac 0050.567D.5E12
interface Ethernet3/3
inherit port-profile n1kv-uplink
interface Ethernet3/4
inherit port-profile n1kv-uplink
interface control0
line console
boot kickstart bootflash:/nexus-1000v-kickstart-mz.4.2.1.SV1.5.1.bin sup-1
boot system bootflash:/nexus-1000v-mz.4.2.1.SV1.5.1.bin sup-1
boot kickstart bootflash:/nexus-1000v-kickstart-mz.4.2.1.SV1.5.1.bin sup-2
boot system bootflash:/nexus-1000v-mz.4.2.1.SV1.5.1.bin sup-2
svs-domain
domain id 200
control vlan 1
packet vlan 1
svs mode L3 interface mgmt0
svs connection vcenter
protocol vmware-vim
remote ip address 192.168.1.252 port 80
vmware dvs uuid "a5 5d 2b 50 90 f4 f8 5a-7e 21 8b 8e f9 62 6e d2" datacenter-name Test-Servers
max-ports 8192
connect
vsn type vsg global
tcp state-checks
vnm-policy-agent
registration-ip 0.0.0.0
shared-secret **********
log-level
Also the DVS screen shot for this host:
Any idea what might be wrong and where to look?
Thanks in advance!

Question about sample rate and PXI 5122

Hello! i am new at using labview and pxi cards. i am trying to sample a signal from an analog gennerator with pxi-5122 so afterwards i can process the samples and extract the processed samples to an oscilloscope through pxi-5421. i tried to use the labview examples for pxi-5122 for sampling and processing( more precisely the example "digital filtering"). They are working perfectly for high sample rates (some MHzs), but when i try to sample low frequency signals (for example 20kHz) and use sample rate according to Nyquist criterion, the acquired samples dont reconstruct the initial signal at all. if you have experienced similar problems, how can i sample low frequency signals with sample rates according to Nyquist criterion?

Nyquist criterion says: "sampling freq. should be at least twice the max. feq. component in the signal". For better reconstruction you should keep the sampling rate to some 8-10 times of max freq. component in the signal.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Airport Extreme Base Station cannot see with Macs

Out of the blue my Macs are experiencing a problem seeing the base station network. I can see it with my iPhone. I have a PowerMac G5 duel core 2 Ghz and cannot see the base station or it is sporadic. System says that the airpot card is recognized on my G5. Other Macs on network experiencing the same issue. Tried turning everything off and restarting. This only works part of the time.
I am on Cox cable service using the modem then the airport. Any suggestions? Thanks for any help in advance.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

MAX cannot see my PXIe-5122

Similar Messages

Maybe you are looking for