MAX causes Windows crash

I installed LabView 7.1 and the additional programs which where shipped with the DAQPAD-6015 on two different computers, both running Windows XP Professional. On one computer everything works fine. On the other computer I have a big problem:
when I start MAX and expand the devices and interfaces it takes a few seconds and then I get a 'blue screen' the whole systems crashes and the computer reboots. This happens always in the same way, if the DAQPAD is connected or not. I tryed deinstalling LabView with all components and reinstalling eveything again with the same result.
Has anybody an idea why everything works fine on one computer and on the other one not?

In the meantime I updated Ni-488.2 from version 1.7 to version 2.3. This diden't help.
Then I updated NI-VISA from version 3.2 to version 3.3, and the problem is fixed since then.
Now everything works fine, there is no crash anymore in MAX and I am able to configure
my Hardware.
There is only one question not answered: why does it work on one computer with NI-VISA 3.2
and on the other computer I needed to update NI-VISA to version 3.3 to avoid a computer
crash when I wanted to configure something in MAX?
Anyway it seems to be a good idea to update your software components to the latest versions
if something with the hardware doesen't work.
Tom Gloor

Similar Messages

Seagate FreeAgent Desk 1TB causes windows crash and to go in a reboot loop

I bought this Seagate external USB HDD 1000Gb capacity and have been using this for a while. I was able to backup about 500gb of data. This external hdd was permanently hooked on to my computer which has win XP pro (4gb ram, 2.66Ghz CPU Pentium). I have used this only for backing up personal data ,photos and videos.
One day I got the dreaded blue screen and rebooted my machine. The machine went on a reboot cycle. It used to show BIOS screen then windows logo and back to BIOS screen.
After that I unhooked my external HDD and the machine booted up clean. Now when I try to hook the external HDD and power it on, my windows crashes with the blue screen and shows the ntfs error.
How do i make it work. I have lots of data which I can't afford to lose.

Sounds like the drive has gone bad, not a common problem by any means. If the data is important, there are several data recovery options including Geek Squad. These options are not cheap though.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Plugin-container.exe causes windows crash that causes Firefox to crash

Any help that can be given with this problem would be appreciated.
I'm running an older machine (Windows XP SP2). I was having a problem with Firefox 9.0 redirecting my search results to other sites. Scans with Norton and Malwarebytes showed no malware on the system. I upgraded afew months ago to Firefox 12.0 hoping that would fix the problem - thinking it was Malware and not bothering to check the support website here. That didn't fix the problem. So over the weekend I uninstalled Firefox 12.0 completely from the system - including my profile information. I did a clean install of Firefox 17.0. I think the redirect problem is fixed, but now I have a new problem - nearly every website I go to I get a windows error "Runtime Error. Virtual C++ Runtime library plugin-container.exe R6030 - CRT not initialized." This locks up Firefox and causes it to become unresponsive (so I can't get a Firefox crash report).

First try to update XP to Service Pack 3 and all other most recent updates. Then try again.

Blu-ray creation causes windows blue screen crash

I am testing Premier Elements 7 for the creation of best quality DVD and Blu ray disks. Source is AVCHD 1920x1080i and I have managed to create a number of DVD's and one Bluray without problem. My latest trial creating a Bluray disk failed at about 98%, burn in progress with a Device Error message. This resulted in a blue screen windows crash. Far more worrying is if I re-insert that BD RE disk back into my PC to erase it and try again, it immediately prompts a Blue screen windows crash, so I guess the disk is ruined. I have previously used Premiere Pro, Ulead and more recently Cyberlink Power Director and Sony Vegas. The quality of the DVD footage produced by Premier is far superior and the Bluray output was also excellent. Cyberlink has proved to be a good package appart from the poor quality of re-rendered output. Sony Vegas Pro seems the only one to recognise raw AVCHD footage and opt not to recompress it!!! The Movie Studio version doesn't appear to do this, however, I have only had a limited go at the trials. I had narrowed my choice to upgrading to Adobe Premier, or the cheaper Elements 7 which suits my requirements for home movies, however, a major windows crash, which I tend never to get has got me running scared. Why o why is there not a burn to hard disk option for Bluray creation as for DVD? Has anyone experienced a similar problem - any ideas as to what I could try?

A BSOD situation normally indicates something is wrong systemicly with the computer. It can be either software (usually OS), or hardware related.
The first thing that I would do would be to gather all info on your system and list full OS, version, updates, etc., and all hardware specs. Something in those lists might provide a clue.
Next, I'd look carefully at Event Viewer, especially at the System and Applications tabs. Look for yellow warning messages at the time of the BSOD, and especially the red error messages. It might be easier to invoke a BSOD, so you will know the exact time and date of the crash. Study each yellow and each red message carefully. Many might not yield much useful info, but some might tell you a lot of about what is happening, and may even give you the cause. Please explore every link that is offered in each of these messages. They should take you to either the MS site, or to the site of a software, or hardware company. These will likely be where you'll gather the most important data.
Here's what to look for in Event Viewer:
Give us any details found there.
Also, see this LINK. The video is a bit long, but will furnish you with a lot of troubleshooting tips, and also tools from MS. Make notes of these tools and their use.
Good luck,
Hunt

Desktop software causes Windows 7 to crash

I have been using Desktop Software for ages now, very successfully on the Windows XP Pro platform. I have now changed to Windows 7 Pro. Although I have downloaded and installed the latest Desktop software build, which is supposed to be Windows 7-compatible, it is certainly not on my machine.
What happens is this: When I first install the Desktop software, and start it, and use it to sync with Outlook, it works fine. Eventually of course I shut down the computer at the end of the session.
The problem occurs when I next trry to boot up. Every time I do this I get a blue screen crash long before any welcome screen appears. The blue screen doesn't last long enough for me to read what it says but the effect is clear - no boot until a repair of some sort is done. I have found that the only way to achieve a successful boot after this is to take the repair option and then the restore option to a time before installing the Blackberry Desktop software.
This has happened so many times now, with other software and hardware being installed at different times perfectly successfully. Only Blackberry Desktiop software causes these crashes. I have gone through this process at least a dozen times now, all with exactly the same effect.
Does anyone have any idea what might be going on here?

ive recently run into this problem as well with windows 7 on my gf's pc. both got 9700 bold's mine worked out fine with vista, but her comppy wont boot. bout as far as i can get from school is to walk her through booting into safe mode to uninstall the bb app til i can get home lol.. kinda screwwy that i cant really find much useful information about it in the past hour or so
about the only thing that has shown up was a 'problem signature 07' screen saying badpatch.. apparently no decent error code to lookup.. help!

Starting Firefox in Private mode from the pinned ico in taskbar causes Windows Explorer to crash.

Starting Firefox in Private mode from the pinned icon in taskbar (right click, choose "New Private Window") causes Windows Explorer to crash almost everytime, but not always. Very odd.
Didn´t happen with previous versions of Firefox.
Firefox 22.0, Win 7 Ultimate with all updates applied.

Hello Paul,
That's a very odd behavior indeed. All I can think of is that an add-on is confused and makes Firefox crash. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Video Drivers in Windows 7 64 bit cause Windows to crash after reboot

I have a Mac Mini mid 2011, I installed Windows 7 64 bit through Bootcamp. After the install I install the Mac drivers. I have narrowed it down to the video card drivers are causing Windows to crash on reboot. Are there other drivers I can use? Am I doing something wrong?
Thank you in advance for any help or advice.

I have an imac
I have an magic pad (same thing as the touch pad on a macbook really)
I have an usb mouse I use both in windows and osx
if your trackpad somehow was registered as actived for some reason it would seem as if it was the mouse
had some *** situations both in windows and osx when my cat sit on the magicpad

Importing video from hard drive causes windows to crash

Whenever I try to add video files to itunes either itunes freezes or windows crashes. I've tried comepletely reinstalling itunes and Quicktime as well as using selective configuration on startup but still keeps happening. Any suggestions?
Windows XP Pro

Hmmm. I installed the new driver but still no go. After I install and startup again I get notices that new hardware has been detected (video something, VGA compliant...) and Windows prompts me to install the correct drivers. I tried iTunes before and after accepting this prompt for another driver but always the same.
After starting up again and before accepting the Windows prompt I checked the Device Manager and there was a yellow question mark beside a VGA device (not sure if I remember this correctly) which hadn't appeared in the list before. After accepting the prompt this device disappeared.
And ideas where to turn next?

Why does firefox cause windows vista to crash

why does firefox cause windows vistra to crash

hello, as long as the download-process isn't finished a file gets the .part extension appended - this is the expected behaviour in firefox...

Firefox stops responding and causes Windows to stop responding also

Sorry if this is vague; I just wrote a very, very detailed post on my issues but then the site decided that I didn't have permission to post it and erased everything.
My problem is that Firefox freezes and causes Windows to freeze for a while also. after a few minutes it goes away, but today I got the following error message:
"AdapterDeviceID: 0x679a
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:29.0.1,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.3
AvailablePageFile: 8932384768
AvailablePhysicalMemory: 7403167744
AvailableVirtualMemory: 2997309440
BIOS_Manufacturer: American Megatrends Inc.
BlockedDllList:
BreakpadReserveAddress: 48037888
BreakpadReserveSize: 37748736
BuildID: 20140506152807
CrashTime: 1402766616
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1402339725
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x679a, AdapterSubsysID: 6616103c, AdapterDriverVersion: 14.100.0.0
D2D? D2D+ DWrite? DWrite+ D3D10 Layers? D3D10 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1402758510
SystemMemoryUsePercentage: 30
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: http://www.newegg.com/Product/Produc...D=3938566&SID=
Vendor: Mozilla
Version: 29.0.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed."
I noticed the file "mswsock.dll" mentioned so I looked for issues with it. Apparently there are issues with malware and Firefox and that file. I have scanned and it found nothing, plus this issue has existed in three formats of my drive and windows re-installs (for other reasons, I didn't format and re-install just to make sure there was no malware) so I'm pretty sure there are no problems with malware.
I am running a Minecraft server and I have a static IP set up, but I've been doing this for three years without issues so I don't think that's the issue either.
I have tried disabling all plugins. Still crashes and crashes Windows with it.
I have run Memtest86+ and the windows memory tester. Not a memory issue.
Here's my troubleshooter info: {
"application": {
"name": "Firefox",
"version": "29.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.3; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0",
"supportURL": "https://support.mozilla.org/1/firefox/29.0.1/WINNT/en-US/"
"crashes": {
"submitted": [
"id": "bp-588b7adc-28fd-43ab-bc02-91dda2140614",
"date": 1402766691156,
"pending": false
"pending": 0
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 6,
"browser.sessionstore.upgradeBackup.latestBuildID": "20140506152807",
"browser.startup.homepage_override.mstone": "29.0.1",
"browser.startup.homepage": "http://scratch.mit.edu/|http://lotro-wiki.com/|http://localhost:8080/",
"browser.startup.homepage_override.buildID": "20140506152807",
"browser.tabs.warnOnClose": false,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "29.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1402771877,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.importedState": true,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"privacy.sanitize.migrateFx3Prefs": true,
"storage.vacuum.last.places.sqlite": 1402344545,
"storage.vacuum.last.index": 1
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 10",
"windowLayerManagerRemote": false,
"adapterDescription": "AMD Radeon HD 7900 Series",
"adapterVendorID": "0x1002",
"adapterDeviceID": "0x679a",
"adapterRAM": "3072",
"adapterDrivers": "aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64",
"driverVersion": "14.100.0.0",
"driverDate": "4-17-2014",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.3.9600.17111",
"webglRenderer": "Google Inc. -- ANGLE (AMD Radeon HD 7900 Series Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.3",
"version": "4.10.3"
"NSS": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSUTIL": {
"minVersion": "3.16",
"version": "3.16"
"NSSSSL": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSSMIME": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Adblock Plus",
"version": "2.6.3",
"isActive": true,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
Like I said before, sorry if this is vague. Let me know if you need more info and hopefully I'll be less impatient with this site then.
I'm running Windows 8.1 64 bit. My full specs are here: https://pcpartpicker.com/b/FfJxFT (I've upgraded to Windows 8 and replaced the dead hard drive now. My new drives are a 120Gb Samsung 840 EVO and a 1TB Seagate Barracuda).
Thanks.

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

I have files that freeze my programs whenever I try to open ANY file. Is there a way to find the exact files causing the crash?

I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!

This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan

Intel processor bug causes Windows 2008r2 guest to blue screen

We recently purchased several B200-M3 blades with E5-2680v2 processors. Our UCS infrastructure and blade firmware is at 2.2(1d). ESXi hosts are at 5.5u1.
From my reading of the Release Notes, this makes the new blades vulnerable to Caveat CSCuo30572 which is a bug in the v2 processors that can cause Windows 2008R2 guests to blue screen.
VMware KB2073791 also deals with this bug
The Intel Erratum is C135
Updating the firmware (2.2(1d) probably to fixed version 2.2(3d)) is a relatively long process in our environment.
Has anyone experienced this bug? Do the guests blue screen at any particular time; e.g. when booting? Are Windows 2012 guests impacted? One of our new v2 blades was running Windows 2008R2 guests for about a week without any known problem. It has since been taken out of production.
The Release Notes (2.2) description for CSCuo30572 is: "Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests." Should the PSOD (ESXi crash) actually be BSOD (Microsoft crash)? Or can ESXi purple screens be caused also, crashing the entire host?
The Release Notes also indicate that the Caveat is resolved in release 2.2(2c)A. Does the A indicate that an Infrastructure update is all that is needed? That does not seem like it would supply the fixed microcode to the processors via BIOS.
I'm basically looking for some insight before proceeding with another FW update. Thank you.

Yes, it refers to Infrastructure (UCS Manager, FI and IOM). You could just upgrade the infrastructure to 2.2.3d and leave your Servers at 2.2.1d
Table 2 Mixed Cisco UCS Releases Supported
of the release notes.
CSCuo30572
Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests.
2.1(3a)A
2.2(2c)A

Sticky Notes in a pdf file cause ie7 crashed.

This is a very interesting bug.
System version: Windows XP with SP3
Adobe Reader Version: 9
IE version: IE 7
Files needed for testing:
a pdf file (note.pdf) with Sticky Note displayed.
a html file (note.html) which has a url link to note.pdf
Action which causes the crash:
1.       Open note.html in a new IE window
2.       Click the link to open the note.pdf in a new window or a new tab, then close it
3.       Click AGAIN the link to open the note.pdf in a new window or a new tab, then close it
Then you could see the error window popup, the ie7 browser crashed. This has been tested in 3 PCs.
Check the Error Event, it said:
Event Type:        Error
Event Source:    Application Error
Event Category:                None
Event ID:              1000
Description:
Faulting application iexplore.exe, version 7.0.6000.16850, faulting module msvcr80.dll, version 8.0.50727.3053, fault address 0x0001e898.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 78656920 726f6c70 78652e65
0020: 2e372065 30362e30 312e3030 30353836
0030: 206e6920 6376736d 2e303872 206c6c64
0040: 2e302e38 32373035 30332e37 61203335
0050: 666f2074 74657366 30303020 39386531
0060: 0a0d38
The bug doesn’t happen to IE 6 and Fixfox

Try Goodreader in the App Store. It should do the job for you.

Windows crashes upon Java exit.

Firstly, I apologise that I know very little about Java and if I've omitted any important information here I may need precise instructions on how to find it out.
According to the Add/Remove Programs menu, I have 'JS2E Runtime Environment 5.0 Update 6', version '1.5.0.60' installed.
My problem is that, in any of the following situations, Windows crashes and I either get a BSOD reporting a 'stop error', or my computer reboots itself:
1) I exit the Java Control Panel, attempt to clear temporary files using the Java Control Panel, or exit certain settings windows/message boxes from the Java control panel (Always occurs)
2) I exit Limewire (which I assume has some embedded Java applet) (Always occurs)
3) I exit a Java executable (.jar file) (Always occurs)
4) I exit Internet Explorer or Firefox (sometimes occurs. I think it's safe to assume this is when I've visited a site with a Java applet, but I haven't tested this)
5) I end the javaw.exe process from Windows Task Manager (always occurs)
6) I attempt to uninstall Runtime Environment 5.0 Update 6 from the Add/Remove Programs menu (always occurs. The crash happens a good while into the uninstallation, however)
Is this a known issue? What is the cause/possible cause? How can it be resolved, given that I can't uninstall Java?

This is a long shot, but anti-aliasing and/or video driver problems seem to cause most of the crashes. So try the following and respond back whether it worked or not.
Make sure you have anti-aliasing set to Application-Controlled: http://www.java.com/en/download/help/5000041100.xml
Make sure you've updated to the latest video drivers.
Make sure Directx is updated to the latest version.
If that still doesn't work read http://forum.java.sun.com/thread.jspa?threadID=661574 and then try adding to your environment JAVAOPTIONS variable -Dsun.java2d.d3d=false. If that doesn't work try -Dsun.java2d.noddraw=true
If the problem was AA, then and you still want to force all 3d applications to use AA and you don't want to keep changing your graphics card display options, you can disable java's use of the Direct3D by setting an environment variable JAVAOPTIONS to -Dsun.java2d.d3d=false. This will allow you to keep your AA settings. Disabling Direct3D is the proposed update to 1.5 (Update 8) to fix this bug. See http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6311320

MAX causes Windows crash

Similar Messages

Maybe you are looking for