Max clock speed of 4th gen i5-4210U processor on R014TX Notebook

Hi, 
My new laptop, HP R014TX has Intel 4th gen i5 processor. The maximum speed of this processor under turbo boost mode is 2.7GHz as seen in the specification. But on my system it is showing and reaches a max clock of 2.4GHz and not 2.7GHz. Why is this so? Could you please explain me on this.
Thanks in advance for your response.
Regards,
Pavan

Even though the CPU specs are such, the HP BIOS may be preset otherwise.
HP uses the InsydeH2O BIOS which gives the end user very limited to no options for CPU adjustments.

Similar Messages

  • Need to update ipod touch 4th gen to OS 5 using Mac Notebook OS 10.5.8

    I have an ipod touch 4th gen OS 4.3 and urgently need to update to OS 5 for a project. I read other discussions on this here and tried to use iTunes to update my ipod touch software but it does not work, telling me I need to update  iTunes software but  iTunes will not let me download and install new software. Is it b/c I'm using a Mac notebook running OS 10.5.8?  It tells me to update iTunes software to version 11 but when I click to download it doesn't . Any suggestions?

    Upgrade the computer to Snow Leopard:
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • How to get higher clock speeds with OC Genie?

    I am 100% new to overclocking and I just built my new pc...
    Bios version 1.5
    Intel I7 860 Cooled with Corsair H50 Push-Pull
    MSI P55 GD65 non USB3
    2x2gb Corsair XMS3 DDR3 1600(Running at 1333 for some reason)
    Zotac Geforce 9800GTX+ 512mb
    Antec Trupower Trio 550w
    2x WD Caviar Blue 160gb in Raid0
    When I hit the OC Genie button it gives me 3.54GHz. Is there anyway to get to 4.0GHz with my setup.
    Have not changed any settings myself all was done with the OC Genie button
    My temps are around 42' with fans on lowest settings

    Quote from: Bernhard on 01-May-11, 15:25:22
    OK, so you are able to set your CPU voltage manually. You need to consider that the auto voltages will compensate only up to a certain OC level, after which the user usually has to do manual adjustments. This auto compensation differs for each hardware combination. As HU16E suggested, try low VDroop and see if it helps. The other alternative is a BIOS flash, or manual voltage settings.
    I tried low vdroop but it didn´t make any difference. But it´s ok, i can set the vcore manually but i was just investigating if i could get the best of both worlds with the powersavings auto vcore offers during idle

  • Max clock speeds for 4800SE.VTD?

    Mines are 300*612
    But nowadays 295*595.... Yours?

    Hey TheCRaSH
    I also cannot go much higher than 295 / 595...
    BTW, How exactly do you card look? Check my thread here and you'll understand what I'm saying: http://www.msi.com.tw/program/e_service/forum/index.php?threadid=30551&sid=
    []'s

  • Max Clock Speed (AMD Chips only please)

    I was wondering what the highest CPU clockspeed in MegaHertz anyone has got on any AMD chip. This is sort of a see whos highest contest  
    If you can, put down the FSB, Multiplier and model.
    Thanks
    --

    Hello, Overclocking Gurus, my set up is in my sig.
    The highest Overclock I could achieve, with my Barton 2500, and were
    it would boot into Windows, and run stable for any period of time was
    220 x 11.5 = 2,530MHZ with the vcore @ 1.85v with my Core temp
    running @ 10-20 degrees Celsius over ambient.  
    I didn’t want to smoke my Core or my RAM quite yet, so I back it down
    to 202 x 11.5 = 2,323 MHZ with the vcore @ 1.70v, now my Core temp
    runs @ 2-6 degrees Celsius over ambient, and totally stable 24-7.
    The Highest Overclock for a Barton 2500 non-M, that I found was 3,210
    MHZ with the vcore @ 1.90v and cooled by air with a SLK-700 and a
    TMD fan.  It’s hard for me to believe, that someone can reach 3,210 MHZ
    on air with a SLK-700 and a TMD fan!  If someone could achieve that
    high of a overclock, I would have thought surely it was cooled by a
    Prometeia rig!  But who really knows, it could just be a little fib!
    I found that info here http://www.overclockers.com and click on CPU database.
    I can almost guarantee that there have been higher Overclocks using liquid
    Nitrogen!  But I don’t think it will remain stable for any period of time!
    Liquid submersion is the way to go if you want to achieve nice Overclocks,
    with a very low overall temp, but it is extremely expensive, and quite scary
    putting all of your components into a bath of liquid, also, it might be a bit
    messy if you like to change video cards or other components often!
    The H20 Guru
    If You Build The Circuit, The Electrons Will Come, You Hope!
    Enermax 550 v1.2 EG651P-VE PSU
    +3.3V=36A  /  +5V=36A  / +12V=36A
    +5V & +3.3V = 200 Watts
    Nvidia MB Chipset Drivers v3.13
    Nvidia VGA Drivers v56.72

  • FFT express VI: maximum possible clock speed

    I'm using the FFT express VI in an FPGA VI running on a PXIe-7962R.  The maximum clock speed I can use without getting timing errors on compilation is 125 MHz.  Is this about right for this VI?  I see that the Xilinx LogiCORE FFT has much faster max. clock speeds listed - > 300 MHz for most configurations.  Would I be able to achieve a significant speed increase by switching to the Xilinx IP module, or are there other timing considerations specific to LabVIEW FPGA that would slow it down?

    Hi Bob,
    125 MHz does sound about right for the FFT Express VI.  You may be able to increase that a bit by adjusting the Clock rate, Throughput, and Length parameters, but you definitely won't be able to get it up to 300 MHz as you mentioned.  Based on the Xilinx LogiCORE FFT documentation, it does look like that could be a faster solution. Have you tried compiling with that method?  What clock rates were you able to compile.  Also, what rate are you trying to reach?
    Thanks,
    Morgan Sweatt
    Applications Engineer
    National Instruments

  • 4th Gen iPod only works with usb - freezes with firewire

    After a recent iTunes upgrade my my 40 gig Gen 4 iPod started locking up and freezing my G4 and G5 when using firewire to transfer files until I unplugged the iPod.
    I found several threads from people with similar problems and tried all the suggestions (with the exception of "dropping" the iPod.)
    After a week of troubleshooting, I'm finally successfully transferring files using USB 1 - it also freezes with USB 2.
    This is the troubleshooting process I went through to arrive at the above conclusion:
    First did the 5Rs.
    Deleted and reinstalled iTunes
    Followed Mitch's suggestion for using Disk Tools to reformat the iPod (successfully)
    Ran some of the internal iPode diagnostic test and they indicate no problem with the drive or USB or firewire.
    Ruled out iTunes as the problem because I was having the same problem when I closed iTunes and just copied files directly from the desktop to the iPod. When doing the transfers in the Finder, the Finder would freeze/lock up and I'd have to reboot.
    Rules out the computer because the same thing happened with both G4 & G5.
    Ruled out something in the user profile because the same thing happened when using my wife's account.
    Ruled out the firewire cables because the same thing happened with two different firewire cables.
    I've seen several posts from people with similar problems but no solutions. Has anyone cracked this nut? It takes FOREVER to update 40 gig with USB
    Dual Processor G4 & G5 Mac OS X (10.4.6) 40 Gig 4th Gen iPod
    Dual Processor G4 & G5   Mac OS X (10.4.6)  

    It looks like the answer to my problems was a bad hard drive. Sent it to the ipod doctor and after a $159 repair, I'm back in business http://nycipoddoctor.com/

  • M30 Centrino clock speed

    I have a Satellite Pro M30 notebook and whenever i check the system information, it shows that the clock speed is at 598MHz, whereas the processor should run a 1.5GHz. I have tried using the "always high" option from the BIOS, but that does not change the freqency at all. the notebook is substantailly slower than it would be and it has been like this since i purchased it.
    What can I do to fix this problem?
    Thank you for your help

    Did you buy a new one or already used Notebook?
    I ask you this because CPU speed is absolutely too low. It can happen after changing of motherboard because in this case it is necessary to update a special firmware to get the full CPU-speed.
    Without this firmware the machine runs at a fixed speed around 600MHz. The best solution is to get in contact with the Toshiba Service partner and ask them if they can check motherboard.
    Bye

  • Speed difference between i7 quad 3rd gen 2.6ghz and i7 quad 4th gen 3.1ghz?

    How much speed difference in Logic X will I notice between an i7 quad 3rd gen 2.6ghz and i7 quad 4th gen 3.1ghz?
    both loaded with 16gb 1600 ram... 256gb ssd

    Kappy wrote:
    All other things being equal 4-cores are twice as fast as 2-cores. This is regardless of what you are doing. The only way a 2-core processor would be as fast is if it were run at twice the clock speed. But the 2-core CPU is only clocked around 10% or so faster. Now, for all that you claim you will be doing the relevant question is do you need 4-cores. My answer is that you don't. But the 2-core machine will be slower - all things being equal.
    Iris is a far better GPU than HD4 or 5000. But not as fast as a discreet GPU with better performance measures. Again, you don't really need high-power GPU. Iris should meet your needs adequately for now.
    But remember you want to keep the computer for 6 or 7 years. No one knows what your needs will be then. You may find whatever you buy today that meets today's needs will be inadequate for tomorrow's.
    Your comments on graphics pretty much confirm the majority of what I've been reading on other sites.
    The conflict is with cores. About half the people are saying for low CPU intensive tasks 4 cores are totally unnecessary, while the other half says they'll make things faster no what the task (one thing all seem to have in common is they're totally against the 2014s).
    So it seems I'm left with the decision between faster performance vs better graphics.
    I appreciate your input.

  • I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

    Hello all.
    I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
    I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
    Is anybody able to help me please.

    You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
    You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

  • Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.

    Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.  I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
    I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house.  For some reason the range is low and speed veru disappointing.
    I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed.  Please HELP!

    No silver bullet........but my suggestions may drive you in the right direction.
    1.  Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
          Proceed to #2 if this dosen't help.
    2.  Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem. 
    2a.  Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch)  wait for all the modem lights to come on EXCEPT activity.
    2b.  Connect ethernet from modem to TC, and plug in the power cable to TC.
          Proceed to #3 if this dosen't help.
    3.  Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
    All really simple to do....if you need additional help let me (us) know.

  • I have an ipod touch (4th gen) and just bought a clock/charger/player.  It says I need ios 4.3.  I keep getting a message saying I can download 6.? but it will wipe out everything on my ipod.  Is there a way to get the ios without wiping out my files?

    I have an ipod touch (4th gen) and just bought a clock/charger/player. It says I need ios 4.3. I keep getting a message saying I can download ios 6.? but that it will wipe everything off my ipod.  Is there any way to get the ios without wiping out my files?

    There is no supported method to "downgrade" iOS on any device.  If you update, you will get the latest iOS for your device, which will be iOS 6.1.3.  You cannot go backwards to iOS 4.3
    If you have never backed up in either iCloud or iTunes, then upgrading to iOS 6.1.3 will involve restoring your device as part of the upgrade.  Without a backup to restore from, you will loose everything that is on it.
    You should first connect to iTunes with your computer, sync your device without upgrading and create an up to date backup of everything.  Then use the upgrade option in iTunes to update your iOS.
    However, if the dock device strictly requires iOS 4.3, it will not work, as you cannot downgrade iOS.  There simply is no mechanism from Apple to do that.

  • My new iPod touch (4th gen) has a significantly lower volume than my old one. I have maxed all the volumes and turned off the volume limit to no help. Can anyone help?

    My new ipod touch 4th gen has a much lower volume than my old one, i have maxed the volumes out and got rid of all volume limits which has nor helped. Can anyone help?

    Are you using the same headphones?
    Did you officially purchase the in an EU country? They require a lower max volume than the USA and other countries.

  • HT1380 i have an ipod touch 4th gen and ipod touch 5th gen is there a univeral adapter/dock that can work for both? i have recently bought a Sony speaker clock radio but only works with ipod 5th gen, i need an adapter for the 4th gen, is there one on the

    I have both the ipod touch 4th and 5th gen, i recently bough a  speaker/dock but it only works for the ipod touch 5th gen? Is there an adapter that I can use to attach the ipod touch 4th gen to the docking system? 

    bobjbkln that only work if the dock has the 30-pin connector
    bobjbkln wrote:
    How about this lightning female to 30 pin male cable? http://www.miniinthebox.com/lightning-female-connector-to-30-pin-male-connector- cable-15cm_p693543.html

  • Airport Ext. 4th Gen. and our Home Wireless Network in chaos?

    Hi,
    In the past 10-12 days (started the week prior to last) approx (May 20th to May 24th ) was the "beginning" of out of the blue random and various (as far as which laptop computer or desktop computer would connect to our home network. Time Warner in N.East Ohio is our ISP provider and have been out three times. We have a mixture of computers (iMac 800 mGZ running OSX 10.3.9 via ethernet from rear of Airport Extreme ( Airport Utility=V 5.6.1)
    A-Port Extreme 4th Generation (Firmware V 7.6.3 (followed Aiport utilty popup when did update > reading up on it)
    Also have a iMac 2010 OSX 10.6.8 , a iPad (latest version (?4 vs. 3) purchased Dec. 2012 and iOS up to date and also airport utilty for it , (it will do online wi fi at work (School based ) but at home is very problemtic (suddenly)
    iPod Touch 2nd Generation (max iOS will go online each time at home so far ) re:Windows 7 based Computers
    aDell Mini Laptop is hit miss , a recent Sony Vaio is not connecting at all and when it did could not print to a cross-platform HP Laser Jet wi fi printer (can hook up via USB also (Printer) A self built Tower (windows 7 with a SSD and a 7200RPM HD as a second drive connects most of the time (using a USB wi fi "dongle " (?) would a wi fi card be better
    Note : We are at the point of recycling the Motorola SURFboard Doscis II Cable modem , the 4th Generation Airport Extreme and restart computers (and have also unplugged the computers and * the complete system (overnight=C-Modem, Airport Extreme and any all Computers and iOS devices (shut off if unplugging not a issue or option)
    I read over in User Tips  (Airport-Complete Power Recycle last modified 4.21.2012 in Apple Support Communities
    I am going to do that (reset to default settings out of the box ) * We also purchased at the same time as The Airport Extreme (4th Gen) a 1st Generation Airport Express (802.11n 2.4-5.0) (not the second generation dual band Airport Express currently sold in the Apple Store (but ? am considering (based on outcome of complete Recyle adding it to extend our network as prior some users got 3-4 bars etc ) we had a 802.11b/g airport express
    but never utilized it for some reason (we started with a Netgear 802.11b it lasted a month (they sent out a new one ) bought a white dome Airport 802.11b(or ) then a D-Link 802.11b/g that failed constantly (I do not recall the model) then in late 2009 bought a MacBook Pro, and also The 4th Generation Airport Extreme and as we added devices (computers Mac or Windows) iOS devices iPod Touch 2nd generation and most recent a iPad
    all had worked without connectivity issues until date above
    oddly (the Cable Modem=all lights including activity(blinked as supposed to or were solid as designed
    and the Airport Extreme light stayed Green ... (other then when doing a recycle the Modem would synch then the Airport Extreme would be Amber (soldid for a few seconds, then blinked amber for a few seconds then turned Green.
    I isolated the Motorola Surfboard Modem (ethernet out to a older imac and it got online (with A-Port Extreme ethernet connection disconnected-then did a recycle and wired in the Airport Extreme (WAN) to Cable Modem Docis II and then ethernet from rear of Airport Extreme (and the iMac (2004 with a Airport Card in it) went online
    We use ethernet connection on it due to its security limits (type of ) where all other computers and iOs devices
    utilizing the Airport Extreme are all wireless and can print wirelessly (up to thedate above)
    I did discuss Docsiss III cable modems (we purchased a Docsis I then II as data needs were upgraded and renting  made purchase a easy decision (and DocissIII has some features not available (in the Motorola SURFboard Docsis III I read the manual and quick start (not ?that its the internet modem or not but channel bonding + faster D-Load speeds (our service was 10MBs and TWC increased it to 15 MBS without fees (and intersting is that all rentals (at least online here) are Dosciss III regardless of plan type ( and in specs though are plan states our Modem and DocissII are fine ) only the Turbo and ?Business class (30MBs and 50Mbs plans/  services "require Docis III cable/internet modems (I did some research awhile back on a "Unofficial Time Warner site and www.AVS
    .com or .net and one or both discussed TWC, Docsis III internet modems +A-Z (the AVS forum also discuss's HDTV (and cable boxes another story)
    I realize this is long (and some one can pull out possibly a quick option or issue (I did check the A-Port Utility settings and also power output (a MacWorld Article in March 2013 page 90 gave the ratio and there are other ways to do it as well (and out put wise (Signal) we are in the excellent range but when have connectivity issues
    and run system disgnostics (wether Mac or windows) its (on my iMac Airport=Green (three top issuesare green
    then at ISP= Red
    TWC feels if it continues it must be the Airport Extreme (?)
    Will do the complete recycle (set to default and same with Utilty ) and once done verify settings-security levels etc
    * I can not figure out how to activate Firewall Logging (its on for firewall.apps ) but not actual Firewall on Network (Airport or ? my Imac) best book I read (The Missing Manual for OSX 10.6.x SNow Leopard (but it did not detail
    Airport EXtreme-Airport Express in detail )
    Many, Many, Thanks Apple /Mac /Computer Users all!
    diamondblues a.k.a David K.

    Hi There,
    I appear to be having the same issue. I have been using my provided time warner router and wifi with all of my Apple devices without an issue until recently. It appears that my macbook pro and twc router will not initiate the "handshake". I get a wrong password was entered or network error message. I contacted twc and they reset my router and renamed it along with a new password. This initially fixed the issue for maybe a day or so. Then the problem began all over again. I have been through he ringer, reinstalled osx, deleted plist...etc contacted apple care and twc. At this point both parties have been no help what so ever... So I connected a new western digital wifi router and all of a sudden I'm getting amazing speed and connectivity. I'm still puzzled as to why all of a sudden my macbook pro or Internet would just quit working... If anyone has any suggestions I'm all ears and any help would be great.
    Current macbookk pro specs:
    OS:10.9.3 Mav
    processor: 2.2 GHz core 2 duo
    memory 4GB 667 MHz SDRAM
    Nice Name: MacBook Pro 15 inch Core 2 Duo SR (Mid/Late 2007)
    Machine Model: MacBookPro3,1
    Name: MacBook Pro (Mid 2007)
    ModelCode: mbp_mid_07
    Family name: A1226
    Model Number: MB074
    Group1: MacBook
    Group2: Pro
    Generation: 31
    CPU speed: 2.2GHz
    Screen size: 15 inch
    Screen resolution: 1440x900 pixels
    Colour: Aluminium
    Production year: 2007
    Production week: 30 (July)
    Production number: 642 (within this week)
    Model introduced: 2007
    Memory - flavour: DDR2-S-667
    Memory - number of slots: 2
    Memory - maximum total: 6GB
    Memory - largest module: 4GB
    Factory: W8 (Shanghai China)

Maybe you are looking for