Max clock speeds for 4800SE.VTD?

Mines are 300*612
But nowadays 295*595.... Yours?

Hey TheCRaSH
I also cannot go much higher than 295 / 595...
BTW, How exactly do you card look? Check my thread here and you'll understand what I'm saying: http://www.msi.com.tw/program/e_service/forum/index.php?threadid=30551&sid=
[]'s

Similar Messages

CPU clock speed for 2645 and 2646 series

I looked for the clock speeds of the CPUs for 2645 and 2646 series at the IBM website but could not find them. Is there a pdf file which contains the above info, or a way to look for the clock speed for a given p/n? Could anyone help?

Visit this page:
http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do?country=us
Input the 7-character model number and watch the history unfold...
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Max clock speed of 4th gen i5-4210U processor on R014TX Notebook

Hi,
My new laptop, HP R014TX has Intel 4th gen i5 processor. The maximum speed of this processor under turbo boost mode is 2.7GHz as seen in the specification. But on my system it is showing and reaches a max clock of 2.4GHz and not 2.7GHz. Why is this so? Could you please explain me on this.
Thanks in advance for your response.
Regards,
Pavan

Even though the CPU specs are such, the HP BIOS may be preset otherwise.
HP uses the InsydeH2O BIOS which gives the end user very limited to no options for CPU adjustments.

Adjust CPU clock speed for saving Power

Does anyone know which software is the best for adjusting the cpu clock speed in Mac book pro? I want to decrease to half of the original speed in MBP so that I can save power when I'm on the battery.
Thanks

well I do understand what you mean but then I would like to have a software to control the clock speed like I control my fan speed although the default setting does that automatically. I don't really want to use it without a battery because apple does not recommend that also.
Thank you

Max write speed for CD-RWs with HL-DT-ST DVD-RW GH41N drive?

hey all,
I've had a look online, but I can't find the answer.
Does anyone know where I can find the max write speed using CD-RWs, with the HL-DT-ST DVD-RW GH41N CD/DVD drive that's in my Mac Pro?
Looking into getting some faster CD-RWs (10-16x), want to make sure my Mac Pro's drive can actually burn them at this speed first.
cheers
Sam

apparently, it can burn up to 32x speed for CD and CD-RW discs:
http://discussions.apple.com/thread.jspa?messageID=12513651

What Max burn speed for DVD or DVD-DL?

Hello,
How can I find out what recording speed DVD, DVD-DL or even plain CD's should I buy for my Macbook? .. Mid 2007 model, 2G's ram, Super-Drive.
I just don't want to go get 8x speed if the system is not going to be able to take advantage of it.
TIA
Oscar A. 

http://www.amazon.com/LaCie-LightScribe-Titanium-FireWire-300979U/dp/B000F9W1D0
thanks, really appreciate it...

How to change CPU clock speed for conserving power?

Hi, I own a compaq CQ60 404CA and I am wondering how I can change the settings for minimal cpu speeds.
I know it automatically sets it's speed down to half when not being used. I want to decrease that even further.
Is that possible?
I tried Nvidia system tools, but it gives a wrong reading regarding the CPU speeds (2.8ghz when its actually 1.05ghz)
Thanks
I've tried:
1. Changing CPU power settings down to 1%, and even then it stayed at half speed
2. Checked Bios, but didn't find settings

Yes it is possible, try steps in amd forum guide, here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Max burning speed for iMac drive?

Internal SuperDrive is MATSHITA DVD-R UJ-875
Should I burn at 8x or 16x?
Alexa

Hi
In iDVD up to version 6 You can't set burn speed.
In iDVD08 and 09 - You can
If You use Roxio Toast™ - You can
Apple Disk Util tool - You can set here too
If You don't select iDVD sets speed acordingly to DVD disk eg x16
As faster - as many write errors
I use x1 when able to select
On older iDVD I use DVD x2 disks.
I would
• Use iDVD to do a DiskImage
• Use Disk Util tool or Toast™ to make the burn at x1 speed
Using iDVD 4 - then You need a Hack to make it able to do the DiskImage
Hurz and Pfurz" on
http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/15-burn_idvdother.html
Yours Bengt W

Max Clock Speed (AMD Chips only please)

I was wondering what the highest CPU clockspeed in MegaHertz anyone has got on any AMD chip. This is sort of a see whos highest contest
If you can, put down the FSB, Multiplier and model.
Thanks
--

Hello, Overclocking Gurus, my set up is in my sig.
The highest Overclock I could achieve, with my Barton 2500, and were
it would boot into Windows, and run stable for any period of time was
220 x 11.5 = 2,530MHZ with the vcore @ 1.85v with my Core temp
running @ 10-20 degrees Celsius over ambient.
I didn’t want to smoke my Core or my RAM quite yet, so I back it down
to 202 x 11.5 = 2,323 MHZ with the vcore @ 1.70v, now my Core temp
runs @ 2-6 degrees Celsius over ambient, and totally stable 24-7.
The Highest Overclock for a Barton 2500 non-M, that I found was 3,210
MHZ with the vcore @ 1.90v and cooled by air with a SLK-700 and a
TMD fan. It’s hard for me to believe, that someone can reach 3,210 MHZ
on air with a SLK-700 and a TMD fan! If someone could achieve that
high of a overclock, I would have thought surely it was cooled by a
Prometeia rig! But who really knows, it could just be a little fib!
I found that info here http://www.overclockers.com and click on CPU database.
I can almost guarantee that there have been higher Overclocks using liquid
Nitrogen! But I don’t think it will remain stable for any period of time!
Liquid submersion is the way to go if you want to achieve nice Overclocks,
with a very low overall temp, but it is extremely expensive, and quite scary
putting all of your components into a bath of liquid, also, it might be a bit
messy if you like to change video cards or other components often!
The H20 Guru
If You Build The Circuit, The Electrons Will Come, You Hope!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3V = 200 Watts
Nvidia MB Chipset Drivers v3.13
Nvidia VGA Drivers v56.72

Max CPU Speed for MS 6131 Ver:2

I have a computer that I'd like to upgrade (slightly) with a faster CPU... I currently have a 550mhz PIII and want to know if I have room to put a faster PIII or Celleron or whatever in without getting a new motherboard.
The manual shows it has support for 233mhz and faster. Chipset is Intel 82440BX AGP. 66.6MHZ and 100MHZ sclocks are supported.
BIOs is award 4.51
If it matters, The current CPU is the old large brick (I Believe Slot 1). I don't know if that means coppermine or whatever (pardon my ignorance).
Plz advise! Thanks in advance for your help
Thanks,
Mark

I spoke with MSI and the fastest CPU officially supported is the 600MHz Katamai PIII.
If you flash the bios to a version that supports coppermine you should be able to get a celeron to run using a slocket card converter by setting the vcore manually to 1.80v but it could fail or even cause damage.

Max speed for 645 ultra?

What is the max processor speed for the 645 ultra? The manual says can support from 1.5 to 2.0ghz and up. How high does the "up" go. Would I be able to get the new 3ghz processor when it comes out? Right now I have a 1.6ghz (overclocked to 2.02ghz) and want a higher speed...
(oh yeah, I have the MS-6547 version 1)

http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=43%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6547
not sure on 3.0 one way or other myself

FFT express VI: maximum possible clock speed

I'm using the FFT express VI in an FPGA VI running on a PXIe-7962R. The maximum clock speed I can use without getting timing errors on compilation is 125 MHz. Is this about right for this VI? I see that the Xilinx LogiCORE FFT has much faster max. clock speeds listed - > 300 MHz for most configurations. Would I be able to achieve a significant speed increase by switching to the Xilinx IP module, or are there other timing considerations specific to LabVIEW FPGA that would slow it down?

Hi Bob,
125 MHz does sound about right for the FFT Express VI. You may be able to increase that a bit by adjusting the Clock rate, Throughput, and Length parameters, but you definitely won't be able to get it up to 300 MHz as you mentioned. Based on the Xilinx LogiCORE FFT documentation, it does look like that could be a faster solution. Have you tried compiling with that method? What clock rates were you able to compile. Also, what rate are you trying to reach?
Thanks,
Morgan Sweatt
Applications Engineer
National Instruments

Clock speeds

What are memory clock speeds for NX7600GT-TD512 and(or) NX7600GT-TD256? because i couldn`t find them in webpage. i supose core speed 560MHz as for all 7600GT
thanx

Quote from: Nameisis on 05-May-07, 07:16:40
ohh i also want to know if 800 satnd for 1600 couse somwhere was writen that card said it was 1600 Mhz but it realy was 800MHz but couse DDR2 it works like 1600MHz, so i wasn`t to know if MSI`s 800Mhz are better than Palit`s 1400Mhz and Club3d`s 1100MHz
thanx
correction in a my previsional post, its 700Mhz for memory not 800Mhz. e.g spec. again:
NX7600GT-TD512(AGP):
GPU Clock: 560MHz
Memory Clock: 700MHz (1400Mhz effective) DDR3 1.4ns

Max Fan Speed on MBP

I have checked my max fan speed for my MBP at /sys/devices/platform/applesmc.768/fan1_max and the value is set at 5700. Shouldn't the max fan rpm be around 6200? I have tried changing the file as root but I still am denied from changing it. What can I do?

Hi Here is a new software from Malwarebytes. MBAM is trusted by millions of PC users. It will find programs that aren't necessary on start up
http://www.malwarebytes.org/products/startuplite/
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

What's the minimum Clock Speed Requirement for GB3?

What's the minimum Clock Speed Requirement for GB3 (assuming one wishes to create and play mult. audio tracks within this current iLife app)? Is it 733mhz?
Here's what i was able to find on
iLife ’06 requirements:
To install iLife, you need:
• A Macintosh computer with a PowerPC G4, G5, or Intel Core processor; 733 MHZ or faster required for iDVD
• 256 MB of RAM; 512 MB recommended
• Mac OS X version 10.3.9 or Mac OS X version 10.4.3 or later; Mac OS X version 10.4.4 recommended
• iTunes 6.0.2 and QuickTime 7.0.4 (included)
• A DVD drive for installation
• 10 GB of disk space to install iLife '06 applications

Thanks Christoph, TIA, and AppleGuy!
Christoph, what model are you using? You said you have even less Mhz, but your model looks like the same as mine.
TIA, I looked at the other thread (thanks for the link) any idea what other models are affected by the sound output problem?
I probably will back up first just to be safe, and won't try running them both at the same time. I was hoping though to have full functionality of the Podcasting features plus all the old music ones without slowing the machine down.
Tansef

Max clock speeds for 4800SE.VTD?

Similar Messages

Maybe you are looking for