Max cond value vs max cond base value

Hi All,
What is the difference between
Maximum condition value & Max condition base value, in the condition records. (VK11,12,13)
Path - Maximum condition value:-
VK13 --> condition records --> add sales data --> max cond value
For Path Maximum condition base value, i cant see the field out there on the screen
PL help with the differences between the functionality, appreciate, if it is with an example
Jimit Shah

Hi Jimit,
I think it should be ' Condition Base value " and "Max condition value " I may be wrong.
Conditional base value When a value is derived for a condition type, based on certain calculation this value is taken as base.
Condition base value is a concept used in pricing procedure and actual term used is alternate condition base value. This is a formula assigned to a condition type in order to promote an alternate base value for the calculation of the value. If you have to calculate price of a material then you have to have a base value for it. For e.g. if you want to calculate the discount of 10 % for a material then you have to have a base value on which this 10% is calculated. Normally you take the condition value of the base price of the material to calculate the value.
Max condition value, Provided that the condition update function is active for a particular condition type, you can create condition records that specify a maximum cumulative value. The system uses the condition value of an item as the basis for the cumulative value.
You can specify the maximum value when you maintain an existing condition record. The condition update indicator must be maintained in Customizing for Sales for the corresponding condition types.
For example, specify that a customer receives a 10 USD discount for a particular material up to a maximum cumulative order quantity of 5,000 cases. As the customer places sales orders for the item, the system keeps track of the cumulative value (in this example, the number of cases) and stores this data at the condition record level. Once the cumulative value reaches 5,000 cases, the system automatically deactivates the discount. ( Source help.sap.com )
To view the cumulative value for a particular condition record:
Within the condition record, choose Extras > Cumulative values.
A dialog box displays the cumulative value of sales orders where this condition record was used.
Thanks/Rajesh
Edited by: Rajesh Kumar Bhansali on Mar 2, 2011 5:40 PM
Edited by: Rajesh Kumar Bhansali on Mar 2, 2011 5:41 PM

Similar Messages

Max.cond.base value - wrong line totals in Sales Order and Invoice

Dear Experts,
In my pricing procedure, I have set the field Max.cond.base value as 1 in VK12 (in additional data) for one of my condition type ZR16 . If Max.cond.base value is set as 1 for ZR16 condition type, the value for ZR16 will be considered only for the 1st quantity for that item. All subsequent quantities for that item will not be considered. This works fine in Sales Order and when I enter the same material in 2 line items with qty 1 each, only the first line item considers ZR16 value in total net value and the second line item does not consider the value of ZR16 in the total, which is correct.
Problem arises when I create individual deliveries and individual invoices for each line item. Although the ZR16 value is not considered in the total for the second line item in the sales order the value is being considered in the invoice which is wrong. I tried various scenarios and found this issue arises only with domestic customer and not with overseas customer. Issue is that the line total value value calculated correctly in sales order is reflecting wrongly in Invoice when I use Max.cond.base value. I am confused if this is a pricing procedure related issue or copy control related. Please share your valuable inputs.
Regards,
Madhavan

I tried various scenarios and found this issue arises only with domestic customer and not with overseas customer
Compare the access sequence combination and condition record in both the above cases and check which one is differing and creating issue.
the line total value value calculated correctly in sales order is reflecting wrongly in Invoice
Again here also, compare the Analysis tab which should be self explanatory to find out the root cause of the issue.
G. Lakshmipathi

Rebate agreement - cond. base value and scale base value

Hi,
Good day!
I just like to ask the possible reason for the <b>cond. base value</b> and <b>scale base value</b> in rebate agreement (path: rebate payments -> verification level) to contain zero values only.
thanks,
nerissa

*

Alt cal type, alt cond base value

Hi SAP Gurrus,
If the interviewer asks, what is alt calc type, alt cond base value , what i have to tell
Plz tell the def and with small example for
1.alt calc type ,
2. alt cond base value ,
3. Subtotal.
which is in Pricing procedure.
2. What is Replenishment Lead time.

Hello,
What prashant told in that i will add something like.
alt calc type u acn give example like rutine no 11 which is used for calculating profit magin.
base cal type u can give example is 12 or 13 that we use to cal fright. like we cal frieght on wt basis we take base cal type as wt from mmr.
some detailed info as follows i hope this will help u lot for understanding the same
Subtotal:
The value of this field determines where the values of subtotals to be captured i.e. in which table and which field.
Controls whether and in which fields condition amounts or subtotals (for example, a customer discount or the cost of a material) are stored.
If the same fields are used to store different condition amounts, the system totals the individual amounts.
These condition amounts or subtotals are used as a starting point for further calculations. You may, for example, want a subtotal of all the discounts included in the pricing of a sales order.
Requirement:
It is a routine that is written by an ABAP consultant according to the business requirement.
By defining Requirement in condition technique we can restrict the access of condition type.
To understand the concept, we will take the example of the Rebates. Rebates are to be included during the billing document processing and not in the sales document processing. As rebates are given on the delivered quantity and not on the ordered quantity (in case of cut-off period for rebates).
For rebates we use the condition types BO01 to BO05, and in the Requirement column we give the value 24 which is "Only in Billing Document".
This Requirement will ensure that these condition types will appear only during the billing document processing.
If new Requirements are to be defined we follow the procedure given below.
Go to T.Code: VOFM. - Maintain Requirements & Formulas
Click on the "Requirements" in the top menu and then click on "pricing".
We have a list of requirements, we can ask ABAP consultant to create new requirement based on the client requests.
And we assign the application type like V - Sales/Distribution etc.
AltCty - Condition formula for alternative calculation type:
It is again a Routine that is written by ABAP Consultant.
It is an alternative formula for the condition type that can be used instead of standard formulas.
For example, let us take the Profit Margin which can be both + / - , so here this routine will help us in generating the value which can be either + or -. Profit margin is not a condition type so it cannot be classified as +ve or -ve in the V/06.
Ex.: 950 0 Profit Margin 11.
So we assign 11 - Profit Margin.
If new routines are to be defined we follow the procedure given below.
Go to T.Code: VOFM. - Maintain Requirements & Formulas
Click on the "Formulas" and then on the "Condition Values".
We have a list of routines, we can ask ABAP consultant to create new routines based on the client requests.
And we assign the application type.
AltCBV - Alternative formula for condition base value:
Formula for determining the condition basis as an alternative to the standard.
It is again a Routine that is written by ABAP Consultant.
It is used as a basis to calculate value of the condition type instead of using it from the "FROM" column.
Ex.: Freight - KF00.
Freight is calculated based on weight, volume etc. and not on the base price. In pricing there is no entry of weight from which the value can be referred like we do for discounts using base price. We have to get the value from the Material master.
In this column we can mention the value as 12 - Gross Weight or 13 - Net Weight.
During pricing, the system will consider the value that is mentioned in this column and determine the freight based on this value.
Suppose we have Net weight: 100 kgs and Gross Weight: 150 kgs. And if we mention 13 in this column then the Freight condition KF00 will be calculated using the weight as 100 kgs.
Replenishment Lead time
Time needed for production & procurment of item.
like for ex u mainatin rlt as 10 days when u put sales order u do avail.check if stock is not there then system cosider RLT for giving confirmed delivery date in future.
u can maintain it in mmr or even in sales doc type.
Regards
nitin

Regading cond base value

Hi,
when we create a sales order, from where the condition base value is populate in an condition type?

Hi,
    condition base value are poultaed using pricing
    routines defined check
    vofo->formulas-pricing routines
    vok0-enviromment-condtition table
Regards
amole

648 max , testing base and extended memory

I dont see the thread i answered to one time that someone spoke of using ddr400 with 648 max or max-L board and they were getting testing base and extended memory error from the LED's. Well i just got the same error today and my system would not boot i cut the power to the PS. and turned it back on it would start to boot and hang i could barely get to the windows logo sometimes the vid card wouldnt even boot the logo to the screen. This is with an updated mobo that msi sent me that i had just put in , it seemed to run fine at first then this problem started occuring. The only difference i had in the setup from the previous outdated board was i had the mem in DIMM 3 and not DIMM 1, so i moved the memory back over to DIMM 3 and now the problem is gone. Just something for those of you with the same problem to try.
Oh and i forgot one more issue, i cannot set the dram speed in the bios manually i have ddr 333 it should be 167 mhz so i set it to 4/5 and the system will not boot at all i end up having to reset cmos. I called MSI about that and they told me to just have it set to SPD , I said i know that and im fine with leaving it that way but it should let me set it manually if i wanted to and that i wondered if that had anything to do with the random " testing base and extended memory " problem.

It was probably myt thread...
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=6204&boardid=10&styleid=1
Have done some testing with both DDR333 and DDR400 and my results are in the thread.
Right no I'm using my DDR400 as DDR333, manually set to 167MHz, using DIMM1, and havn't seen any problems. I'll try the DIMM3 to see if I get any changes.
And by the way.. I tried setting my DDR400 manually to 200MHz and it wouldn't boot at all. After a lot of ugly language I finally got it back to the BIOS....after a reset of the CMOS.
Seams like you should use SPD if you want to use the correct freq for your RAM.
Have you tested the new 1.3 BIOS?

Rebate : Scale base value is showing zero

Dear Friends,
While configuring Rebate Processing I am getting following problem :
Description: We are Maintaining Condition record on basis of Product Hierarchy for Rebate agreements.
Problem : When we want to view Rebate Payments -> Verification level, the Quantity under Scale Base Value is showing zero but appropriate accruals is coming.
My end user wants apart from Cond.base value & Accruals the Scale Base Value (which shows Quantity) should also come so that he can have a idea on what value and quantity the rebate is been given.
Note: For each Product hierarchy we are maintaining one of the SKU relevant for Product hierarchy in material for settlement field.
Expecting a good answer from u all sap gurus.....
Thanks in advance.
Regards...
Tushar

Hii There
This kind of problem was existing in my system too.
I raised this with SAP people and they told me to apply SAP note no.# 970384 after which the scale base quantity was appearing.
You could try this out.
Thanks & Regards
Gaurav Manocha

Condition base value...

Hi,
We have two basic price condition types called
ZLAB and ZLTR. At any point of time only one condition type will be executed and fetch the price.
We also have ZLAD is the discount based on whichever availble on the above one.
ZLAB
ZLTR
ZLAD
Now I need execute this discount rate based on which is active condtion record.
To cater this can I make use of altenative condition base value formula ?
or any other config set up will help?

Hi,
Which pricing schema look better out of given 2 here
                Schema 1
ZLAB Basic price
ZLTR Basic Price
ZLAD Discount on any one of ZLAB or ZLTR, which is available
ZLVR Discount on any one of ZLAB or ZLTR, which is available
======
Net value
=======
                Schema 2
ZLAB
ZLTR
======
sum value
=====
ZLAD
ZLVR
===========
Net value
========
Here the schema 1 is looks better and as per Standard SAP way. I got the answer for how to writte the cond. base value routine.
Step 1: - Assign subtotal to ZLAB (say "A)
Step 2: - Assign subtotal to ZLTR (say "B")
Step 3: - create new cond. base value , write a code
             as
                  if Value for A is not equal to zero, pass the value to xkwert
               else
               pass the value of B to xkwert.
Step 4: - Assign this routine to ZLAD
step 5: - Create ZLAD condition record.
Results: - System takes either A or B value as base value and for the discoun of ZLAD.
Thanks, good learning
Laxman

Alternative calculation type and alternative condition base value

In pricing procedure what is the difference between alternative calculation type and alternative condition base value?Kindly help

Hi,
Please check the forum before you post your questions as this question was answered a number of times earlier.
Please check the below link which discusses in detail regarding the same.
[Alt Cal Type and Cond Base Value|Alternative calculation type and alterantive condition base value in pricin;
Regards,
Phani Prasad

Base AirPort Extreme and LACINEMA Black Max

Hello..
My name is Cristiano, i'm from Rome (Italy)..
I have a small difficult for how i config connect from Base Airport to Lacinema Black Max and from Lacinema Black Max to Base Airport.
I have buy LACINEMA BLACK MAX
(see this link http://www.lacie.com/it/products/product.htm?pid=11229)
The problem is, i have subscribe and write on forum from LACIE.COM and say that is probability the config on base airport isn't complete...
If you know this LACIE and how is the config of airport for connect, please can you help me?
Because is 2 weeks that i have'nt resolved!
Thank you very muach

It is Mac OS Extended (Journaled).
Tried to repair the disk. That produced interesting results! I got a message telling me it couldn't repair the disk and to back up as many files as possible, reformat the disk and restore the backed-up files.
I wonder if that means my hard drive is on it's way out then? I've had it a few years, but I really haven't used it much. For the first year I don't think I turned it on. Maybe I should buy I new one.
Thanks so much for your suggestions. If you hadn't suggested that, I wouldn't have known there might have been a problem with my hard drive.

Cumulative quantity has exceeded still billing have condition value.

Hi,
Requirement – One discount condition which will be applicable up to a certain quantity at billing.
Issue – Condition is getting determined at billing while cumulative quantity has exceeded.( I am using pricing type C in copy control delivery to billing).
Note –     1. I am using partial Delivery method.
               2. When creating new order functionality is working fine.
Existing Scenario-
i. I have created one condition with condition update setting.
ii. I have maintained VK11 with amount 90 Rs. and Max.cond.base value 1000 qty in additional data.
iii. I have created one sales order (ord. qty. 1500).
iv. Created 1st delivery and billing for 1000 qty.
v. When creating 2nd billing(qty 200) with same delivery, system is picking discount condition which should not happen as billing quantity has exceeded.
Please advise
Thanks and Regards,
Vinod

Hi Vinod,
Which routine have you created..did u create a routine for 'alt calc type' or 'alt cond base value' in pricing ?
If after using A or D in pricing type in copy control, the condition values are not copied from the sales order, then that means there is some issue with the copying control settings.
Anyways, now you have met your requirement.
Please close this discussion.
Regards
Jobi

How to input values with lsmw?

Hi,
I'm trying to maintain pricing master data with object of LSMW as below.
Object               0070   Condition record
Method               0000
Program Name         RV14BTCI
Program Type         B   Batch Input
but I can't find where I can input the fields 'Max.condition value' and 'Max.cond.base value'.
pls help.
tks in advance.

Hi ,
In Lsmw , we will input through flat file or an excel file.
please check in steps of lsmw , where first we have to define a structure of the file and then say the either input the values from the flat file or word with a tab separator.
thanks
Kuntla

Wrong excise value is calculated in billing doc. = VF01.

Dear All ,
I have created a billing doc for a STO , now my price of 1 ton is Rs 57328.94 & in billing the Con for exc is JEXP it is for,14 % but the exc cal culating as Rs 8329.61 , instead of Rs 8026.05 here the wrong calculated Rs 8329.61 is 14.529 % of Rs 57328.94 .so i m in VF03 now selected the cond type & clicked on detail icon here what i see that the a screen opens for header cond. details , here in cond details tab the amount coming as 14 % , Cond base value is Zero & Cond value is Rs 57328.94 , After this on the same scren i had clikced on Go to -
> cond record --> here also 14 % is given then how the system is calculating 14.529 % instead of 14 % .
Rgds
sap12

in the STO under cond tab at item level i had clicked on analysis tab then the con appearing are as under --->
Condition type     Message     Description
P101     213     Amount copied from material valuation data
FRB1     207     Condition has been found (without condition record)
FRC1     207     Condition has been found (without condition record)
FRA1     207     Condition has been found (without condition record)
Y017     207     Condition has been found (without condition record)
Y018     207     Condition has been found (without condition record)
Y019     207     Condition has been found (without condition record)
Y020     207     Condition has been found (without condition record)
Y015     207     Condition has been found (without condition record)
Total Cost     200     Subtotal
Here there is no JEXP , now as u wrote thjat to check the excise rate in J1ID -
> there is no excise rate made for this material , after this ---> in exceptional exc rate there are no entries., now pl guide that what to check .
Rgds
sap12

How to copy total freight value from pricing procedure to TAXINN procedure

Dear Experts,
I want to copy the total freight value from pricing procedure to TAXINN procedure , i think i have to use SUBROUTINE for that but can you guide me what is the routine number and in which coloum i i have to use e.g. requirement, or ALt CAl Typ, or cond Base value ???
e.g.
freight condition type (QTY , freight) will enter manually e.g. 100 Rs and material qty 4 so total freight is 400 Rs this value (400 Rs) i want to copy from Pricing procedure to TAXINN
How can achieve this ????
Thanks and regards
Hanumant Nimbalkar

Hello,
If you want to calculate VAT above Freight, then in Pricing procedure make the Sub total as blank for Freight confition types.
And in Tax procedure, make the condition base value as 363 for VAT condition type.
Make the tax code for 4 % VAT and u'll get the desired result.
This will solve ur purpose.
Regards
Prabhjot Singh Nayyar

Net Price does not match Net Value / Qty

In my pricing procedure we have a custom routine for a freight & duty condition so change to an alternative condition base value.
The issue is the the Net Value (KOMV-KBETR) & KOMP-NETWR/qty does not match the Net price (VBAP-NETPR).
The Net price is the total as if the alternative condition base value was not taken into account.
How do we ensure the Net price (VBAP-NETPR) is the same as the Net Value (KOMP-NETWR/qty )

Please check what you have in the FROM column of your Freight condition type in your pricing procedure. Please make it blank if any value is maintained there
Also it will be helpful if you can provide what is the logic maintained in the alt cond base value formula, which sub total you are reading in the logic, What all subtotals available in your pricing procedure and how they are assigned.
Regards
Sai

Max cond value vs max cond base value

Similar Messages

Maybe you are looking for