MAX does not communicate to SCXI-1000 under using DAQ-6052E, Win XP over fire wire. "Cannot perform test at this time".

I cannot find the SCXI chassis containing two SCXI-1102 boards using the MAX software. I have added the SCXI 1000 using the new command, and manually configured the cards, but the MAX software refuses to admit that they exist. The 6052E passes its test. I am stuck until the software recognizes the SCXI system.

Based on similar problems answered, I have uninstalled and reinstalled the drivers. I have checked the driver version against the Web, and it is the latest. I have tried one other 6052E, and I have tried each of the 1102B's separately. I do not have a different SCXI chassis, but I have checked all three fuses, and tried setting an alternate address. Because of plug 'n' pray issues with this combination, detailed manual installation instructions were provided, but they do not work under Win XP. I have autodetected the 6052E however, and manually configured the SCXI chassis and 1102B cards. The latest claim is that it cannot find the 1102B. (See attached screen shots for details). This equipment is brand new out of the box, and I expect it to work. Do I
need to buy additional SCXI hardware to prove that this hardware doesn't work?
Attachments:
error.zip ‏565 KB

Similar Messages

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way.

MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?

You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology. Is there a fix for the iPhone 5 to allow call pickup via the Acura?
Thanks

HI Friend,
Probably the problem it is because your iPhone 4 and your car have the same Bluetooth technology ( 2.1 ), but iPhone 5 has new Bluetooth technology ( 4.0 ).
http://www.apple.com/iphone/compare-iphones/

HT2513 In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal

In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?

If you're running Mountain Lion (10.8.3), reminders is now a separate app. Launch reminders from your applications group and you will be able to access File>New Reminder.

Ipod touch does not communicate

my ipod touch does not communicate with my pc. i have followed the trouble shooter and still does not work.

iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Try another cable
- Try another comnuter
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

Mdm:iOS terminal does not communicate to a MDM server

How do you do?
It is Matsuzaki SHinji.
I want you to teach about Apple MDM.
I am MDM Vendor.
The MDM server is using Apache 2.2.3.
WavDAV is used.
The PUT method is supported.
The contract of an enterprise is completed.
The application of MDM is also completed.
I am using the following URL by webdav.
It has also checked that it was in the state which can be used.
https://www.anetm.com/dav/
It is a thing of APNs.
nj_dev_apns-dev.pem
The "user ID" of subject contained in a nj_dev_apns-dev-key-noenc.pem certificate is "jp.co.nishitele."
APNs is used using the following ruby script.
In the following codes, a device token is ending exchangeably.
"[ -device torkn string 32 length set- ]"
Start Script
#!/usr/bin/ruby -Ku
require 'openssl'
require 'socket'
    (msg = []) << "[ -device torkn string 32 length set- ]"
    device = msg.pack("H*")
    socket = TCPSocket.new('gateway.sandbox.push.apple.com',2195)
    context = OpenSSL::SSL::SSLContext.new('SSLv3')
    context.cert = OpenSSL::X509::Certificate.new(File.read('nj_dev_apns-dev.pem'))
    context.key = OpenSSL::PKey::RSA.new(File.read('nj_dev_apns-dev-key-noenc.pem'))
    ssl = OpenSSL::SSL::SSLSocket.new(socket, context)
    ssl.connect
    payload = <<-EOS
"mdm":{"<PushMagic>"
EOS
    (message = []) << ['0'].pack('H') << [32].pack('n') << device << [payload.size].pack('n') << payload
    ssl.write(message.join(''))
    ssl.close
    socket.close
End Script
It performs.
The next warning has occurred at the iPhone terminal.
Apr 30 11:04:35 Evangerion-iPhone4S apsd[60] <Warning>: <APSCourier: 0x131e80>: Failed to parse JSON message payload for topic 'jp.co.nishitele': The operation couldn’t be completed. (Cocoa error 3840.)
An iOS terminal does not communicate to a MDM server.
I would like to solve this.
And thank you.
Thank you for your consideration.
He is waiting for the reply.

Is this iPad used?
iTunes should be version 11
It should be reset to wipe all content from the device and set up as a new device with iTunes.    It should update to IOS 7.0.4

MAX does not start up

I am getting the following errors when I try to open up MAX:
The niRemPXI.mxx plug-in caused an exception in the CmxProviderWrapper::BindPrimary function in the NIMax process.
See these files for details:
C:\ProgramData\National Instruments\MAX\Logs\20130828_180211-NIMax-00001484.log
C:\ProgramData\National Instruments\MAX\Logs\20130828_180211-NIMax-00001484.dmp
The niVISAui.mxx plug-in caused an exception in the CmxProviderWrapper::Finalize function in the NIMax process.
See these files for details:
C:\ProgramData\National Instruments\MAX\Logs\20130828_180213-NIMax-00001484.log
C:\ProgramData\National Instruments\MAX\Logs\20130828_180213-NIMax-00001484.dmp
The exception occurred in the NIMax process in the function CmxExecutionThreadPool:oWorkNonUI.
See these files for details:
C:\ProgramData\National Instruments\MAX\Logs\20130828_181648-NIMax-0000173C.log
C:\ProgramData\National Instruments\MAX\Logs\20130828_181648-NIMax-0000173C.dmp
I have tried repairing MAX software unsuccessfully. How to fix this issue ?
Thanks
Jeet
Solved!
Go to Solution.

Even though NI-MAX does not open up and giving me errors, I opened up labview and placed a DAQmx reset device VI and connected a constant at its input. The constant does show all the daq cards (connected in my PXI sytem) in the labview.
What does this mean ? Can I continue with the development even though the MAX does not open up ?
Another NI engineer recommended trying to install the NI System Configuration utility (http://joule.ni.com/nidu/cds/view/p/id/4086/lang/en )
since it does appear that drivers are currently working correctly. This installer includes MAX and a few other utilities but should not affect driver installations.

Trying to set up iCloud onmy iMac and the iCloud icon does not appear in System Preferences under "Internet

I am trying to set up iCloud on my iMac and the iCloud icon does not appear in system preferences under "internet & wireless". How do I proceed. I have already set it up on my iPad & iPhone.

You have to upgrade to Lion for the iCloud preferences to be available.

Shuffle does not appear in itunes or under my computer

Brand new shuffle does not appear in itunes or under my computer

Hello Chefdave514
Check out the article below to get the troubleshooting steps for the appropriate operating system that is on your computer.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Regards,
-Norm G.

HT4623 how do you update an ipod touch? Mine does not have the software update under the general tab. thx

how do you update an ipod touch? Mine does not have the software update under the general tab. I would like to back it up to Icloud. Thx

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
To use iCloud you have to have iOS 5 or later.

HT4972 My iPad does not have a software tab under settings. Facebook froze so I deleted it and now cannot get it back bc I do not have iOS 5. I do not want to lose pictures,music and apps...help!

Facebook froze so I deleted it and tried to upload it again but I do not have ios5. My iPad does not have a software tab under settings. Help!

Do you sync with iTunes? If you do, your Facebook app should be in your iTunes library and you can simply sync the old version back to the iPad.
If you want to update your iPad, back up first and sync first and you should have no worries.
You only have the option in Settings if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
From iOS 4 or lower - Here are the instructions.
http://support.apple.com/kb/HT4972
More instructions here - for all iOS versions.
http://support.apple.com/kb/HT4623
Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

Cursor does not change to a circle when using eraser

Cursor does not change to a circle when using the eraser.
I'm sure it must be a tick box somewhere.
Its always been ok previously.

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

MAX does not communicate to SCXI-1000 under using DAQ-6052E, Win XP over fire wire. "Cannot perform test at this time".

Similar Messages

Maybe you are looking for