MAX does not show scanner card

I'm using an Allen-Bradley 1784-PCDIS PCI scanner card, and it does not show up in MAX. I've un-installed the card, un-installed NI-DNET 1.41, then re-installed NI-DNET, installed the scanner card, and it still doesn't show up. The card does communicate if I use A-B's RSNetworx or IOLinx, but if I try any LabView VI's, I have no luck. Any ideas or suggestions?
I'm running Windows XP Professional with LabView 6.1.
Additional note - the same PC has a NetMos dual RS-232 card installed, which also doesn't show up in MAX, but it works perfectly with any VI that I test it with.

Hi knorcross
The NI-DNET software supports only National Instruments DNET (and with restrictions CAN) hardware products. DeviceNet products from other vendors are not supported (and thus, they won't show up in MAX). For information or device driver software, please refer to the documentation you received with your Allen-Bradley 1784-PCIDS scanner card.
-B2k

Similar Messages

MAX does not show Remote System tab in tree

Hi dear all,
i have installed LabView 2010 and along that MAX 4.7.7 on my Laptop Visat OS. Problem that i am facing is that my MAX tree "Remote System" Tab is not visible. Only My System tab is visible and its showing all installed software and devices correctly.
1. What settings i need to check to get this tab shown in tree?
2. Do i need to install some other software or patches or re-install what softwares?
3. Why is it happening to me?
Kindly help me with your valuable experiences.
Best Regards
awais qureshi
Solved!
Go to Solution.

Hello Awais,
There are a few places that indicate the Real-Time Module has been succesfully installed. I am attaching screenshots of the following locations that indicate that this is the case:
-'Remote Systems' under Measurement and Automation Explorer (MAX)
-NI License Manager
-LabVIEW splash screen
If the Real-Time module/option appears in the locations listed above, there should be no reason for you to have to uninstall or re-install your software. If there are other indicators such as error messages or the module does not appear in these locations, please attach screenshots and a detailed description. We can then discuss if uninstalling or reinstalling the software is the next best option.
Best,
Patricia B.
National Instruments
Applications Engineer
Attachments:
Real-Time module LVSplashScreen.PNG ‏251 KB
Real-Time NI License Manager.PNG ‏88 KB
Real Time module- MAX.PNG ‏28 KB

NiMax does not show hardware servo card

I have a machine that went down and I am trying to very quickly learn about the NI products. The PC has a PCI Servo card in it that is recognized and installed by win 2000. It says it is working, but the LabView application says that there is no board at the address requested when it is launched. It sounds like the configuration/initialization of the card is corrupted. I opened NiMax, but in the tree on the left it does not show any cards under my computer. Any help appreciated.
Thanks!

Hello hokie1989,
The first thing to do is to make sure that you have the correct software installed. Which NI Motion driver do you have installed? This can be found in Measurement and Automation Explorer under the "Software" section. I would try reinstalling the motion driver but before you do the install make sure you take out the PCI card first. Once your computer recognized the card as an NI motion controller you should see it in MAX under Devices and Interfaces >> NI Motion Devices. Also If you install a different version of the motion driver you will need to update the firmware on the motion card. This can be done by clicking on your device in MAX and then selecting "Update Firmware" in the right window. I hope this information helps. Thanks and have a great day.
Regards,
Mark T
Applications Engineer
National Instruments

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

Sd card reader does not show up as a external hard drive any were on my mac

i have a sd card reader that is run through usb. i plug it in whit my card in it that has files on it but the driver does not show up any were not on the desktop not any were ive gone through the trouble shooting on apples sight but no luck. any one have a idea?
the weird part about it is that it worked a few weaks ago no problem like i would just plug it in and it would show up on my desktop

It seems that Intel Macs have problems seeing (the media in) some USB storage devices.
For example I have a Zynet CR-T1-U28 8-in-1 memory card reader. It works A-OK on an old Powerbook running 10.3.9, and on several PPC-based newer machines running 10.4.10. The cards I've tried in it mount immediately and show up on the desktop (and iPhoto starts automatically if appropriate).
However none of the FAT-formatted cards I've tried will mount on any Intel-based machine I've tried it on (all have been running 10.4.10).
Here's how it shows up on my Macbook:
USB Storage Device:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Generic
Product ID: 0x3260
Serial Number: 20030903213338562
Vendor ID: 0x0aec
And here's how it shows up on the old Powerbook:
USB Storage Device:
Capacity: 60.75 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Vendor Name: Generic
OS9 Drivers: No
Product ID: 12896 ($3260)
Speed: Up to 12 Mb/sec
Bus Power (mA): 500
Serial Number: 20030903213338562
Interestingly one kind of card I've tried, a Sandisk M2 card, the 64 MB card shown on the powerbook, mounts A-OK when it's in my Z710i phone and is connected via USB to the macbook. At first I thought the card reader could be at fault, but given the number of (admittedly vague) reports I've seen here today about similar problems with other devices I'm more inclined to blame some driver or kernel problem on Intel macs.
The following showed up for the first time ever in the console log during today's test to get the System Profiler data:
Jul 22 14:27:17 macweird kernel[0]: USBF: 773285.286 IOUSBCompositeDriver[0x60c0c80](USB Storage Device) GetFullConfigDescriptor(0) returned NULL

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

CJC channel does not show up in MAX

Greetings,
I have an SCXI 1124 that I am reading in 32 TC's with. When I try to configure it for CJC internal under MAX for physical channel it does not show up as described in "DAQmx Acquire CJC Temperature". In that document the CJC physical channel should show up as a string similar to SC1Mod1/_cjcTemp but all I see under MAX under the 1124 is ai0-31. I know this should be obvious but could someone shed some light on this and explain my oversight.

Hi teslac,
The SCXI 1124 is an Analog Output module. Could you mean an 1121 or 1125 possibly?
Also, are you scanning the cjc temp channel along with the thermocouple channels? There are some SCXI modules that have to scan only the cjc temp channel without any other channels. You can find this information int he KnowledgeBase article below.
How Can I Address and Use Cold Junction Compensation (CJC) with SCXI Modules?
Hope this helps!
Robert R. | Applications Engineer | National Instruments

I am not able to change credit card or billing info, it writes that I should alter the reason, but does not show me any problems. Im am not even able to put my account to no credit card. What is happening??

For two days I have tried to bye some apps, navigation programs and charts within the program.
I have tried on the Ipad and the PC, but I am not able to alter any info in my account, every time I try to change anything,the result is it writes that I should alter something beforeI can continue, but it does not show me what is wrong. I even tried make it without credit card and still it says that there is something wrong.
I am not even able to delete the credit info I have on one of the Ipads, I have 4 i am working on. Please advise

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I have a iPad mini, I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
Try the link above. Try to find a phone number for your country, call and ask for account security.

USBTMC device does not show up in MAX.

I have a USB device that will not show up in MAX. When I plug the device into the computer, it is recognized as a USBTMC device and Windows chooses NiUsbTmc.sys as the driver. I believe it also uses niusbtmc.inf and niusbtmc.pnf. After going through the process and rebooting, the device shows up in the Windows device manager as a USB Test & Measurement device. When I open MAX, the device does not show up in the device tree, nor can I seem to find a way to communicate with it. So I uninstalled the device, removed the files above to a temp directory, rebooted, and then created a new inf file using the VISA driver wizard. After going through that whole process, rebooting and then plugging the device back into the computer, I directed Windows to use the new inf file. The device now shows up in the Windows device manger as a NI-VISA device and the driver is NiViUsbK.sys. I open MAX back up and the device is nowhere to be found. I tried using the VISA Interactive control to find the device, but no luck. What step or steps am I missing?

Just plugging the instrument in should have made the device appear as USBTMC in MAX and using the driver wizard is not correct. I don't understand why it didn't show up in MAX with either method though. I've only a small amount of experience with USBTMC but have used the wizard a lot for internally developed USB instruments and they have always appeared in MAX. What version of VISA are you using? The latest version is 4.1 that can be downloaded from http://digital.ni.com/softlib.nsf/websearch/B1A7837FFFD2826E8625729100689D3C?opendocument&node=13207....

Brother DCP8080DN scanner does not show up in Image Capture's list of devic

Hi, I've been printing successfully to a Brother DCP-8080DN for a while now. I have the latest CUPS driver and recently installed the latest Twain driver from Brother. I can scan from the Brother Control Center utility but the printer scanner does not show up in Image Capture nor does it appear in the Print&Fax Print Queue (it's supposed to show up on the right side). Any idea how to get 10.6.6 to recognize the scanner? Rebooting didn't help.

I found the legacy twain_32.8ba however when I try to find the "into" location, and I typed it very carefully..there is no path to this location.
I can't understand why Adobe would do this to me. Do they expect me to go out and buy another scanner? I've written to Microtek. All previous versions of Elements I've had import from this scanner and I've installed the latest scanner software. It's horrible that I have to throw away the money I spent on this so-called upgrade and go back to a previous version. Who thinks up this stuff?
I hope other potential purchasers of 9 understand what they're getting into. I would also like to get rid of the bothersome "ID interface" at the beginning..I would like to get to Photoshop edit is quickly as possible but Adobe is putting me through some sort of merchandising of their "free" web space. I don't want it. I'm spending way to much time on this. - Larry

Lexmark x264dn does not show up as scanner

For the life of me, I can't figure this out.
My Lexmark x264dn (networked, ethernet) does not show up as a scanner in Snow Leopard. It installs, the drivers update, but in System Preferences it's only displayed as a printer. I checked Lexmark website, am using the most current drivers - scanning and printing - and nothing.
It works as a scanner, but only if I use Lexmark's cumbersome web interface. It's connected to our Airport Extreme and is recognized on all four Macs and one PC in the house. Any thoughts?

Not only doesn't it work with 10.6 but I couldn't get the scanner to work with Windows 7 either. I had their tech support try for three hours by them using remote access to my iMac. They finally gave up. I don't know how they can list this as being compatible with either operating system.

IPhoto 9.4.2 does not show mp4 movies to import from SD Card

Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
What could be happening to my iPhoto?
Thanks in advance.

but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader? Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
OT

MAX does not show scanner card

Similar Messages

Maybe you are looking for