MAX doesn't find my USB-Scope

Cheers!
I am using Agilent DSO1014A USB-scope. If I switch my scope first on and then launch MAX it doesn't see my scope. Refresh doesn't help. Why?
Only way which helps is to launch MAX first then power on scope. That is when NI Signal Express lauches too. I would like to see my scope like other non-USB devices on the Devices and Interfaces list of MAX without restaring scope after MAX launch.
BR,
Jick

Jick wrote:
Cheers!
I am using Agilent DSO1014A USB-scope. If I switch my scope first on and then launch MAX it doesn't see my scope. Refresh doesn't help. Why?
Only way which helps is to launch MAX first then power on scope. That is when NI Signal Express lauches too. I would like to see my scope like other non-USB devices on the Devices and Interfaces list of MAX without restaring scope after MAX launch.
BR,
Jick
I think I read somewhere that it is because USB devices only init once on plug-in, and not after that - something to that effect.  Therefore, you need to plug it in AFTER you start MAX, or max won't see it.  That's probably not exactly right, but I think it is close.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Similar Messages

  • JMF doesn't find my USB WebCam

    Hello
    I'm am using a USB WebCam that my Win98 detects it as "PC-CIF Camera Capture", but when I run a code that must show me the detected devices (from java.sun.com, the article written by Simon Ritter!), there is NO video-devices there.
    Could someone who already had this problem help me?

    JMF Registry Editor - Capture Devices - Detect Capture Devices ??

  • HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

    I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

    Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
    Thanks for the quick reply!

  • Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command   S, I get a looping "cannot mount errno = 19" message.

    Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
    Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
    When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
    When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
    When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
    When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
    When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
    When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
    I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

    It's a false report and should be ignored.
    I would not rely on TT as I've already said earlier even before Grant posted similar advice.
    I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
    Drive Partition and Format
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer.  Proceed with reinstalling OS X.
    5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • N82: Nokia Software Update doesn't find the phone

    Hello, I am trying to update the firmware of my Nokia N82, but I get an error message from Nokia Software Updater saying that it doesn't find the phone. I find that strange as Nokia PC Suite indeed finds the phone. The icon on the taskbar says that "AndersMobil is connected".
    I've noticed that if I let Nokia PC Suite run at the same time as Nokia Software Updater, this icon shows that the phone is being connected and disconnected several times while Nokia Software Updater tries to find the phone, something that might indicate that the two programs cannot be run at the same time? I tried to run Nokia Software Update alone, but still the program doesn't find the phone.
    In Windows Hardware Manager (or Units manager, not sure of the english translation) of Windows XP, "Nokia GSM Phone USB Modem" gives the following error message: "The unit is not working as it should as Windows cannot load the necessary drivers for this unit (Code 31)." Under "Portable Devices" in Hardware Manager/(or Units manager?) the error message "This unit cannot start. (Code 10)" appears for the unit "AndersMobil".
    I followed the guidelines on the internet reinstalling Nokia PC Suite and Nokia Software Updater, removing and reinstalling the drivers, but Nokia Software Update still doesn't find the phone, and the same error messages appears in Hardware/Units manager every time.
    What do I do?
    Regards,
    Anders
    By the way, I sent an e-mail to Nokia support about this but they still haven't answered although it's been a long time since.
    Moderator note: translation removed.
    Message Edited by sphere_s on 18-Feb-2008 06:53 AM

    See also my post "N82: Remove memory card and click OK" at /discussions/board/message?board.id=smartphones&me​ssage.id=79797#M79797
    I don't know if that problem might be interconnected with the other in some way or not.
    Kind regards,
    Anders

  • [SOLVED] CUPS fails to find my USB-connected Lexmark X543dn

    Hi there!
    I just installed arch off the netinstall CD. Right now I'm struggling to get it recognize my printer. I fired up rekonq at localhost:631 and clicked my way to Add Printer. When prompted, I provided root's name and password. This brings me to the Add Printer page with the "hourglass-like" circle spinning while it's searching for printers. It doesn't find anything.
    At connecting the printer to my USB port I get the following in /var/log/messages.log:
    Apr 2 12:14:40 Godot kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
    Apr 2 12:14:40 Godot kernel: usb 1-3: configuration #1 chosen from 1 choice
    Apr 2 12:14:40 Godot kernel: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x043D pid 0x0121
    Apr 2 12:14:40 Godot kernel: generic-usb 0003:043D:0121.0004: hiddev1,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-3/input2
    As per http://wiki.archlinux.org/index.php/Cups#Kernel_modules I also tried rmmodding usblp. This doesn't change anything in CUPS' web frontend. However, the modules seems to get reloaded:
    Apr 2 12:16:45 Godot kernel: usb 1-4: new high speed USB device using ehci_hcd and address 7
    Apr 2 12:16:45 Godot kernel: usb 1-4: configuration #1 chosen from 1 choice
    Apr 2 12:16:45 Godot kernel: generic-usb 0003:043D:0121.0005: hiddev0,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-4/input2
    Apr 2 12:16:45 Godot kernel: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x043D pid 0x0121
    Apr 2 12:16:45 Godot kernel: usbcore: registered new interface driver usblp
    and it also appears again in lsmod. So I tried blacklisting usblp, which again doesn't change anything in CUPS' frontend. However, it complains in /var/log/messages:
    Apr 2 12:18:25 Godot kernel: usb 1-4: new high speed USB device using ehci_hcd and address 8
    Apr 2 12:18:25 Godot kernel: usb 1-4: configuration #1 chosen from 1 choice
    Apr 2 12:18:25 Godot kernel: generic-usb 0003:043D:0121.0006: hiddev0,hidraw0: USB HID v1.00 Device [Lexmark International Lexmark X543] on usb-0000:00:02.2-4/input2
    Apr 2 12:18:25 Godot load-modules.sh: Not loading module 'usblp' for alias 'usb:v043Dp0121d0000dc00dsc00dp00ic07isc01ip02' because it is blacklisted
    Apr 2 12:18:25 Godot load-modules.sh: 'usb:v043Dp0121d0000dc00dsc00dp00icFFiscFFipFF' is not a valid module or alias name
    I set cupsd.conf's logging level to debug, which yields the following in errors_log. At 12:22:30 I pointed rekonq at localhost:631/admin, at 12:22:32 I clicked "Add printer":
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 16 POST /admin/ HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Active clients
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "LANG=de.UTF8"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "REMOTE_ADDR=127.0.0.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux; de-DE) AppleWebKit/532.4 (KHTML, like Gecko) rekonq Safari/532.4"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "HTTP_REFERER=http://localhost:631/admin"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "REQUEST_METHOD=POST"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "CONTENT_LENGTH=14"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "CONTENT_TYPE=application/x-www-form-urlencoded"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 2520)
    I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2520)
    D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 16 file=14
    D [02/Apr/2010:12:22:30 +0200] [CGI] admin.cgi started...
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [02/Apr/2010:12:22:30 +0200] [CGI] http=0xb8f4a5d8
    D [02/Apr/2010:12:22:30 +0200] [CGI] op="add-printer"...
    D [02/Apr/2010:12:22:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Getting list of devices...
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
    D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username=""
    D [02/Apr/2010:12:22:30 +0200] Returning HTTP Nicht berechtigt for CUPS-Get-Devices (no URI) from localhost
    D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [02/Apr/2010:12:22:30 +0200] [CGI] cgi_passwd(prompt="Das Kennwort für „daemon" auf „localhost"? ") called!
    D [02/Apr/2010:12:22:30 +0200] Script header: Status: 401
    D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 16 WWW-Authenticate: Basic realm="CUPS"
    D [02/Apr/2010:12:22:30 +0200] Script header:
    D [02/Apr/2010:12:22:30 +0200] cupsdWriteClient: 16 Closing because Keep-Alive disabled
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 16
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 12
    D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Not busy
    D [02/Apr/2010:12:22:30 +0200] PID 2520 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 12 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 12 POST /admin/ HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdSetBusyState: Active clients
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: Authorized as root using Basic
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Basic"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux; de-DE) AppleWebKit/532.4 (KHTML, like Gecko) rekonq Safari/532.4"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "HTTP_REFERER=http://localhost:631/admin"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "REQUEST_METHOD=POST"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[32] = "CONTENT_LENGTH=14"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[33] = "CONTENT_TYPE=application/x-www-form-urlencoded"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 2521)
    I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2521)
    D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 12 file=16
    D [02/Apr/2010:12:22:30 +0200] [CGI] admin.cgi started...
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [02/Apr/2010:12:22:30 +0200] [CGI] http=0xb81f05d8
    D [02/Apr/2010:12:22:30 +0200] [CGI] op="add-printer"...
    D [02/Apr/2010:12:22:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Getting list of devices...
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
    D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username=""
    D [02/Apr/2010:12:22:30 +0200] Returning HTTP Nicht berechtigt for CUPS-Get-Devices (no URI) from localhost
    D [02/Apr/2010:12:22:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 14
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 17 from localhost (Domain)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 14
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 17 POST / HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: Authorized as root using Local
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 17 1.1 CUPS-Get-Devices 1
    D [02/Apr/2010:12:22:30 +0200] CUPS-Get-Devices
    D [02/Apr/2010:12:22:30 +0200] cupsdIsAuthorized: username="root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[1] = "1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[2] = "0"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[3] = "30"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[4] = "2"
    D [02/Apr/2010:12:22:30 +0200] [CGI] argv[5] = "requested-attributes=all"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Godot"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.3"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[13] = "USER=root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Local"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.3"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
    D [02/Apr/2010:12:22:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2522)
    I [02/Apr/2010:12:22:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2522)
    D [02/Apr/2010:12:22:30 +0200] cupsdSendCommand: 17 file=14
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2523)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2524)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 2525)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 2526)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 2527)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 2528)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 2529)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2530)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 2531)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 2532)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 2533)
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 2534)
    D [02/Apr/2010:12:22:30 +0200] [CGI] list_devices
    D [02/Apr/2010:12:22:30 +0200] [CGI] usb_find_busses=3
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "http"...
    D [02/Apr/2010:12:22:30 +0200] Script header: Content-Type: application/ipp
    D [02/Apr/2010:12:22:30 +0200] Script header:
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "scsi"...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2529 (scsi) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "lpd"...
    D [02/Apr/2010:12:22:30 +0200] Script header: MIME-Version: 1.0
    D [02/Apr/2010:12:22:30 +0200] Script header: Content-Type: multipart/x-mixed-replace; boundary="CUPS-MULTIPART"
    D [02/Apr/2010:12:22:30 +0200] Script header:
    D [02/Apr/2010:12:22:30 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "ipp"...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2525 (ipp) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2530 (mdns) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2531 (http) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "socket"...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2532 (lpd) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2533 (socket) exited with no errors.
    E [02/Apr/2010:12:22:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
    E [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2534 (dnssd) stopped with status 1!
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "smb"...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2526 (smb) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2524 (serial) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 13
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] [CGI] Flushed attributes...
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] Found device "parallel:/dev/lp0"...
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/right.gif HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2528 (parallel) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 18 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 18 GET /cups.css HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 19 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 19 GET /images/left.gif HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 13
    E [02/Apr/2010:12:22:30 +0200] Bad request line "" from localhost!
    D [02/Apr/2010:12:22:30 +0200] cupsdCloseClient: 19
    D [02/Apr/2010:12:22:30 +0200] [CGI] usb_find_devices=7
    D [02/Apr/2010:12:22:30 +0200] [CGI] Failed to set configuration 1 for 043d:0121
    D [02/Apr/2010:12:22:30 +0200] [CGI] Failed to claim interface 1 for 043d:0121: Operation not permitted
    D [02/Apr/2010:12:22:30 +0200] [cups-deviced] PID 2523 (usb) exited with no errors.
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 13 GET /images/sel.gif HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:30 +0200] cupsdAcceptClient: 19 from localhost:631 (IPv4)
    D [02/Apr/2010:12:22:30 +0200] cupsdReadClient: 19 GET /images/unsel.gif HTTP/1.1
    D [02/Apr/2010:12:22:30 +0200] cupsdAuthorize: No authentication data provided.
    D [02/Apr/2010:12:22:32 +0200] [cups-deviced] PID 2527 (snmp) exited with no errors.
    D [02/Apr/2010:12:22:32 +0200] PID 2522 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [02/Apr/2010:12:22:32 +0200] [CGI] Got device list!
    D [02/Apr/2010:12:22:32 +0200] cupsdReadClient: 17 WAITING Closing on EOF
    D [02/Apr/2010:12:22:32 +0200] cupsdCloseClient: 17
    D [02/Apr/2010:12:22:32 +0200] PID 2521 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [02/Apr/2010:12:22:32 +0200] cupsdWriteClient: 12 Closing because Keep-Alive disabled
    D [02/Apr/2010:12:22:32 +0200] cupsdCloseClient: 12
    D [02/Apr/2010:12:22:32 +0200] cupsdSetBusyState: Not busy
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [02/Apr/2010:12:22:32 +0200] [CGI] Regular expression "[a-z]+://"
    This is the point where I'm at a loss. Any ideas anybody?
    Regards,
    Rufus D
    Last edited by RufusD (2010-04-06 18:56:15)

    @AndyRTR: Are you serious? *Half an hour*? Anyway, I tried it, but to no avail. The log goes like
    tail -f cups/error_log
    D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
    D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
    D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
    D [04/Apr/2010:20:26:59 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [04/Apr/2010:20:26:59 +0200] cupsdCloseClient: 16
    D [04/Apr/2010:20:26:59 +0200] [CGI] Regular expression "[a-z]+://"
    D [04/Apr/2010:20:26:59 +0200] PID 5696 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [04/Apr/2010:20:26:59 +0200] cupsdWriteClient: 15 Closing because Keep-Alive disabled
    D [04/Apr/2010:20:26:59 +0200] cupsdCloseClient: 15
    D [04/Apr/2010:20:26:59 +0200] cupsdSetBusyState: Not busy
    D [04/Apr/2010:20:27:28 +0200] cupsdReadClient: 20 WAITING Closing on EOF
    D [04/Apr/2010:20:27:28 +0200] cupsdCloseClient: 20
    D [04/Apr/2010:20:27:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [04/Apr/2010:20:27:57 +0200] Report: clients=1
    D [04/Apr/2010:20:27:57 +0200] Report: jobs=0
    D [04/Apr/2010:20:27:57 +0200] Report: jobs-active=0
    D [04/Apr/2010:20:27:57 +0200] Report: printers=0
    D [04/Apr/2010:20:27:57 +0200] Report: printers-implicit=0
    D [04/Apr/2010:20:27:57 +0200] Report: stringpool-string-count=124
    D [04/Apr/2010:20:27:57 +0200] Report: stringpool-alloc-bytes=3904
    D [04/Apr/2010:20:27:57 +0200] Report: stringpool-total-bytes=2960
    D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [04/Apr/2010:20:27:57 +0200] cupsdSetBusyState: Active clients
    D [04/Apr/2010:20:27:57 +0200] cupsdAuthorize: No authentication data provided.
    D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
    D [04/Apr/2010:20:27:57 +0200] Get-Notifications /
    D [04/Apr/2010:20:27:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
    D [04/Apr/2010:20:27:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [04/Apr/2010:20:27:57 +0200] cupsdSetBusyState: Not busy
    D [04/Apr/2010:20:27:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [04/Apr/2010:20:27:57 +0200] cupsdCloseClient: 12
    D [04/Apr/2010:20:28:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [04/Apr/2010:20:28:57 +0200] Report: clients=1
    D [04/Apr/2010:20:28:57 +0200] Report: jobs=0
    D [04/Apr/2010:20:28:57 +0200] Report: jobs-active=0
    D [04/Apr/2010:20:28:57 +0200] Report: printers=0
    D [04/Apr/2010:20:28:57 +0200] Report: printers-implicit=0
    D [04/Apr/2010:20:28:57 +0200] Report: stringpool-string-count=124
    D [04/Apr/2010:20:28:57 +0200] Report: stringpool-alloc-bytes=3904
    D [04/Apr/2010:20:28:57 +0200] Report: stringpool-total-bytes=2960
    D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [04/Apr/2010:20:28:57 +0200] cupsdSetBusyState: Active clients
    D [04/Apr/2010:20:28:57 +0200] cupsdAuthorize: No authentication data provided.
    D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
    D [04/Apr/2010:20:28:57 +0200] Get-Notifications /
    D [04/Apr/2010:20:28:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
    D [04/Apr/2010:20:28:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [04/Apr/2010:20:28:57 +0200] cupsdSetBusyState: Not busy
    D [04/Apr/2010:20:28:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [04/Apr/2010:20:28:57 +0200] cupsdCloseClient: 12
    D [04/Apr/2010:20:29:57 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [04/Apr/2010:20:29:57 +0200] Report: clients=1
    D [04/Apr/2010:20:29:57 +0200] Report: jobs=0
    D [04/Apr/2010:20:29:57 +0200] Report: jobs-active=0
    D [04/Apr/2010:20:29:57 +0200] Report: printers=0
    D [04/Apr/2010:20:29:57 +0200] Report: printers-implicit=0
    D [04/Apr/2010:20:29:57 +0200] Report: stringpool-string-count=124
    D [04/Apr/2010:20:29:57 +0200] Report: stringpool-alloc-bytes=3904
    D [04/Apr/2010:20:29:57 +0200] Report: stringpool-total-bytes=2960
    D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [04/Apr/2010:20:29:57 +0200] cupsdSetBusyState: Active clients
    D [04/Apr/2010:20:29:57 +0200] cupsdAuthorize: No authentication data provided.
    D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 1.1 Get-Notifications 1
    D [04/Apr/2010:20:29:57 +0200] Get-Notifications /
    D [04/Apr/2010:20:29:57 +0200] cupsdIsAuthorized: requesting-user-name="rufusd"
    D [04/Apr/2010:20:29:57 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [04/Apr/2010:20:29:57 +0200] cupsdSetBusyState: Not busy
    D [04/Apr/2010:20:29:57 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [04/Apr/2010:20:29:57 +0200] cupsdCloseClient: 12
    repeating the last 19 lines every minute. I don't get why it is "requesting-user-name=rufusd", when I log in to localhost:631/admin as root with root's password. Regarding the device you spoke about: when I allow usblp to be loaded, /dev/usblp1 gets created. I assume this is what you are talking about. It's a link to /dev/usb/lp1, the latter of which features permissions of crw-rw---- root:lp. My user is not a member of group lp, I just realize... Is there any advise as to which groups are useful for a single-user desktop PC? Until now, my user is only member of network and <username>

  • ITunes Diagnostic Doesn't Find Audio CD or iPhone/iPad - Help!

    I
    I’m having issues with iTune to recognize my iPhone and iPad.  My iPod nano (G5) is recognized.  I’ve run diagnostics with two failures (No Audio CD Found, and No iPod, iPhone, iPad connected).  A month ago everything was working.  What happened?  I’ve spend many hours following the instructions that’s on the web without success.  BTW – the music list that’s on my ‘test’ CD is displayed in iTunes and can be played.  It’s very strange that the diagnostic shows a CD/DVD issue.  I don’t have a virtual drive.  'Importing the CD' works cleanly - no problems.
    I am at a loss.  Any suggestions, phones numbers?
    Thanks, Pat
    Below is the diagnostic report
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    HP-Pavilion RP826AV-ABA a1750e
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0014B5E0092A3C90
    Current user is not an administrator.
    The current local date and time is 2011-07-17 16:22:10.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA , NVIDIA GeForce 7500 LE
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 72dfc61552d02f347bc3653b3c001aea
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:      {3D6285FF-7CD0-4784-99E2-8F34C6839F81}
    Description:          NVIDIA nForce 10/100/1000 Mbps Ethernet
    IP Address:           192.168.0.105
    Subnet Mask:        255.255.255.0
    Default Gateway:  192.168.0.1
    DHCP Enabled:    Yes
    DHCP Server:       192.168.0.1
    Lease Obtained:   Sun Jul 17 15:28:25 2011
    Lease Expires:     Sun Jul 24 15:28:25 2011
    DNS Servers:       192.168.0.1
    Active Connection:               LAN Connection
    Connected:           Yes
    Online:                  Yes
    Using Modem:      No
    Using LAN:           Yes
    Using Proxy:         No
    SSL 3.0 Support:   Enabled
    TLS 1.0 Support:   Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-07-17 16:18:57.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    AGERE OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.2
    Serial Number:     YM015EPQ71V
    iPhone 4 running firmware version 4.3.3
    Serial Number:     61120JJWA4S
    iPad running firmware version 4.3.3
    Serial Number:     DLXFPEWMDFHW
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    After trials and tribulation I found the fix to the iPhone issue.   I removed the USB connect to my external drive (buffalo backup).  After booting up, iTunes recognized my iPhone and iPad.  Major issue resolved.  iTunes diagnostic still doesn't find the Audio CD/DVD, but seems to function correctly.  I will following other discussion topic "Error 2510 regarding CD/DVD drives"
    - Pat

  • MAX can't find USB6210

    Hi, I met a strange problem with my MAX,  I pluged the USB 6210 to my laptop, device manager found it. But MAX can't find the device, restart and refresh several times, even restart the windows several times, and reinstall the MAX, the problem still exists.
    It is so weird, don't know why MAX can't identify the device.

    NI DAQMX Version is 9.5.1, MAX is 5.1, Labview is 2011.
    I asked my coworker to uninstall Labview environment entirely, and I made an installer with DAQMX, MAX, but he installed the installer, his laptop still cant find the device, while Windows works well.

  • TA44551 my gen 4 iPod doesn't charge, the usb cable is good(works on other apple products) What should i do?

    my gen 4 iPod doesn't charge, the usb cable is good(works on other apple products) What should i do?

    What normally happens is most people take showers and listen to thier ipods or live around many sources of humidity.  Moisture corrodes the 30 pin connector on the ipod touch.  Clean and inspect the ipod touch's connection pins to resolve most charging/ sync issues.. The pins could also be dirty, bent or broken.  If dirty: Take 91% rubbing alcohol, dip a tooth brush into it, shake the excessive alcohol off leaving the brush damp(don't use to much alcohol, it should not be dripping).  Careful!!! The Pins are Very Fragile! Gently brush the connector pins, long ways, left to right in a few second bursts, inspecting the pins as you go...   If you have an eye loop or magnifying glass you can see inside the connector easily and see if the pins look dirty or bent or broken.  If they are bent you have to VERY GENTLY stand them back up.  If they are bent very far down, chances are you will snap them off trying to straighten them back up.  If they are not severely bent over, use a very small flat head precision screw driver to bend the pin back parallel with the good pins.  Pease note: certain pins are used by the wire for different things such as sync or charging... If your pins are broken off, do a search and find out what the individual pins on the ipod 30 pin connector do to see what is affected.  Worst case is your pins are broken off.  U can attempt to solder the broken pins back on without opening the ipod touch, which is super difficult to do, or you can open the touch and repair/replace to 30 pin connector entirely.  U will need to do some micro soldering to say to least! Don't attempt unless you are confident in your soldering skills and research how to open an ipod touch? You will need some specific tools and watch out for floating LINT!  Get some canned air ;) use a small 1/2 second bursts from 4-6" away because it will steam up you touch if used for to long. Good luck!

  • I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver.

    I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3

    Welcome to the Apple Support Communities
    Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
    Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
    If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers

  • Bluetooth active but PC Suite doesn't find NOKIA 6...

    I have installed bluetooth on my PC. This PC finds my NOKIA 6230 telephone. When performing a click with the right button of my mouse on the PCs bluetooth icon, it finds the telephone. Also with the right button on the bluetooth icon I can download pictures that I have taken with my phone. So, obviously, I have successfully created a communication between PC and phone. However, the connection is always interrupted after 1 minute or so. Also, although my PC finds my phone, when I try the same with Nokia Suite Connector, this programme doesn't find my phone at all.
    What can I do to get Nokia Suite Connector find my phone via bluetooth? What can I do to establish a bluetooth connection that is not interrupted after 1 minute?
    Just to confirm: Both my PC and the phone have once required a bluetooth code. I have selected "visible for all" on my phone.
    Thank you for your help. By the way: I have a BELKIN Bluetooth adapter. It uses COM4 (if this is important)...
    Thanks for your help, violincase

    After you uninstall the bluetooth drivers that came with the belkin, yhou kust boot pc and reconnect the usb bluetooth stick (I assume that is the thing you have) and let windows auomatically recognise the hardware and then you can see if windows bluetooth software is compatible the the usb stick, it will install the window bluetooth drivers. If the windows own bluetooth driver is not compatible, windows will ask for the cd

  • My ipad doesn't find my printer....

    How do I make my hp 3510 discoverable to my ipad? The wireless printing works from my laptop which has the same wifi settings, but the ipad cannot find the printer????

    Hi Kiwisteve77,
    I understand the Ipad doesn't find the printer.
    Thank you for your reply.
    I will be happy to help you with this.
    Try turning the wi-fi off and on again on the Ipad.
    If that doesn't work turn the Ipad off and on again.
    Check to make sure it is connected to the proper network.
    Power cycle the router, Ipad and the printer and try it again if you are still having issues.
    I have provided a document for How to Use Apple's AirPrint Over a Wireless Network. Go to the section What if a 'No AirPrint Printers Found' message displays on my Apple device?
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

    When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

    You may very well have damaged your library - or even your system by not having adaquate storage available
    And never select all of the pitcture and move them - that will destroy your library - the iPhotolibrary is a SQLite database and must always be kept intact as a single entity -
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • ICal search doesn't find anything

    when I test this by creating a future event with a particular word in it, then return to today and search for that word in the little "search" box at top right, it doesn't find that word.
    Why not?

    I have also had long standing problems of not being able to search for calendar events, either from within iCal or Spotlight or using mdfind.
    None of the suggested solutions worked for me (removing Calendar Cache file, adding and removing folders or drives to the privacy section of Spotlight to re-index, or running mdimport ~/Library/Calendars.
    One clue was that mdimport -d2 ~/Library/Calendars would not even look at the individual .ics files within any .calendar/Events directory (no output). I suspected that this was due to LaunchServices not associating these files properly with iCal. My system had previously been upgraded all the way from 10.0 through 10.6.
    What finally worked for me was the following, using the Terminal, rebuilding completely the LaunchServices database:
    rm /Library/Caches/com.apple.LaunchServices*.csstore
    *defaults delete com.apple.LaunchServices*
    *sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -kill*
    *sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -R -domain local -domain system -domain user*
    (note the capital -R in the previous line.)
    This step will take a few minutes to complete, with a message about I/O throttleing
    reboot (not sure if that is necessary)
    *mdimport -d2 ~/Library/Calendars*
    This last command should now show the successful indexing of all calendar events.
    After this search finally worked again for me!
    Regards,
    Heiko

  • Search engine doesn't find vcards

    The search engine in Address book doesn't find cards that exist in my ALL. They were cards imported via Time Machine. Any way I can get AB to index it's content ?

    One week later, I'm still hoping (praying ?) for a solution...

Maybe you are looking for

  • Problem with JPWR2 on a X99S GAMING 7

    Hi, Currently I have a problem with JPWR2 on a X99S GAMING 7 Motherboard. When I plug a 6 pin or a 8 pin on the JWPR2 the motherboard crash and the cable overheat or short-circuit. My power supply is a 1000W SIlent pro bronze. I tested with a new cab

  • How to add the BPM column in iTunes 12.01?

    This used to be easily done under View Options but is gone now.  Is it somewhere else now or has this feature been removed?  THX!

  • Cut, copy, paste issues

    I have been using a Z10 for the past 2 years, so I am familiar with ho the cut, copy, paste is supposed to work. My new Leap does cut, copy, paste but it does so inconsistently. If I have copied a password from my Password Keeper and used it, for exa

  • HT1343 shutdown dialouge box is open, mouse does not respond, command keys do not respond, how to restart?

    shutdown dialouge box is open, mouse does not respond, command keys do not respond, how to restart?

  • Creating WBS Element BAPI_BUS2054_CREATE_MULTI

    hello all in my zrfc to create WBS element i have called following BAPIs       CALL FUNCTION 'BAPI_PS_INITIALIZATION'.       CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'         EXPORTING           i_project_definition = temp_pspid         TABLES