Max file size in Attachment Page
Hi,
Whats the maximum size of the file which can be attached to an attachment page?
Thanks,
Gowtam.
Shiv,
I tried in one of my old pages a 10mb non-pdf file, the page went into error!
Anyways,
Gowtham if ur raising a TAR, do update this thread with ur final results/TAR number.
--Mukul
Similar Messages
-
WRT350N USB Drive Max File Size?
What is the max. file size for the FAT32 USB Drive when attached to a WRT350N? When I try to transfer a 11.7 GB file to the Drive, the drive "disconnects" after 3.8GB has been transfered. [Transfer status window shows 7.9 GB remaining to be transfered a the time of disconnect.] I've tried both the Mapped Network drive and the FTP Sever approaches and get the same results every time. All smaller files transfer to the WRT350N USB Drive successfully every time. I using a Windows Vista Ultimate desktop (Wired connection) and the Router has 1.3.02 frimware.
The symptoms tend to indicate that the max. file size is limited to 4GB? Is this correct?You will have to format your disk with the help of the WRT350N and after that you will have creat Share with same "Storage" tab on the linksys router.
-
What is the max file size that a Adapter Engine [J2SE] can handle ?
We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk -
Automation in saving a image file with a specific max file size
Hi everyone,
I hope someone can help me by this.
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Any help is really appreciated!
Thanks in advance!
Kind regards
Packesel*push*
Hi everyone,
I still need help with this. Is there any tool (OS X) or script for Photoshop who can fulfill this (see title).
ANY help is really appreciated!
Thanks in advance.
Regards
Packesel -
What is te max. file size for lightroom
i have some very big files. lightroom says that the are to big to catalog. but what is the max. file size ?
There is no MAX file size.
As John points out, the limits are on the number of pixels, not file size -
Hi,
Any one can share what is max file size can be created in Solaris 10 UFS and ZFS ?
What will be max size file compression using tar,gz ?
Regards
Sivafrom 'man ufs':
A sparse file can have a logical size of one terabyte.
However, the actual amount of data that can be stored
in a file is approximately one percent less than one
terabyte because of file system overhead.
As for ZFS, well, its a 128bit filesystem, and the maximum size of a file or directory is 2 ^64^ bytes, which i think is somewhere around 8 exabyte (i.e 8192 petabyte), even though my calculator gave up on calculating it.
http://www.sun.com/software/solaris/ds/zfs.jsp
.7/M.
Edited by: abrante on Feb 28, 2011 7:31 AM
fixed layout and 2 ^64^ -
What is the Max file size can be use in XI
Hello
This depends upon your hardware and sizing of the XI box. so it also depends on how complex your mapping and whether you are using any BPM inside the scenario or not. I have come across where XI is used just to move the file of 1GB also.
but this is thro various tech like message splitting by using BPM.
so if you r sending the file of large size it surely brings XI down so it is adviseable to read chunks of data into XI and process further.
for message splitting you can use below links
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool Message Splitting Using the Graphical Mapping Tool
Sender File Adapter with file conversion Multimapping
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
thank's
Chetan -
Max file size in OSX Tiger?
I regularly backup my hard drive to my USB 2.x 80GB drive with Retrospect. As of the moment my backup file is 20GB's. Is there a max file size limit like there was in the old Mac os?
Thanks,
JohnThis article may answer your question:
http://docs.info.apple.com/article.html?artnum=25557
However, why are you creating a 20 GB file? Why not do a duplicate from one volume to another?
Mind you, you won't get booting as USB can't boot Mac OS X, but at least all the files will be there, and you won't suffer from an all your eggs in one basket issue, where if one file is corrupted the entire file needs to be recreated from scratch. -
What (if any) is the max file size FMLE can make to serve from FMS? Do the profiles have any relation?
Thanks in advance
MatthewI think you misunderstand the concept of streaming. FMS isn't reading from a file when it streams your video, it reads from your stream. This is dynamic - frames are pushed up to the FMS constantly. As such there is no "size" limitation per se. As long as you are streaming from FLME to the FMS the FMS will stream your data to people that connect to it.
However if you plan to create a file and upload that to the FMS for video-on-demand (i.e. not a "live" stream) that may be a different story. Not sure if there is a size limitation there. -
Max file size OSB 11g can process
Hi,
What is the max file size OSB 11g can process? We want to do a POC that picks a file from FTP do some complex transformation and post to another FTP server.
So in this scenario what can be the max file size OSB 11g can handle?
Regards,
AbdulAgain, there is no fixed limit for message size JMS can handle. It depends on the Heap size available. But, In my experience JMS will reduce the practical limit much more than File/FTP transport. I have seen that you start getting a lot of OOM errors if you try to put very large messages on JMS.
Also, if you are going to transform the payload after reading via FTP/File transport, then you will need to initialize the complete payload in memory which will restrict the maximum message size which can be processed properly.
For large Files using Content Streaming is recommended but you can not access the streamed content within a message flow (hence no transformations).
Another limiting factor is CPU utilization, doing complex transformations on large payload will consume a lot of CPU which will effect any other processes running on the same machine (could be another service instance on OSB itself).
OSB is supposed to work with lightweight, stateless and fast processing. If you have very complex transformations, invest in an XML Appliance.
If you need to transfer huge files, then use ODI. -
Max file size OSB 11 can Process
Hi,
What is the max file size OSB 11g can process.
Regards,
AbdulIn addition to providing additional detail, you should ask this question in the SOA Suite forum:
SOA Suite -
How to increase max file size for uploading
hi i have a form that uploads a file and save it in a database..my problem is when it exceeds 2MB it doesnt save in my database. the page doesnt show any error also.
i use multipartrequest..here is multipartrequest...
MultipartRequest multi= new MultipartRequest(request,"/var/www/myuploads/",1000*1024, new com.oreilly.servlet.multipart.DefaultFileRenamePolicy());my application server in tomcat, and my database in mysql..
do i need to set something in tomcat to increase the file size that i can upload?
i need help asap..thanks in advance.tyr to split ur file into separated files
and then upload them,
it is preferable not to upload a big sized file -
Limit File Type and file size in attachment table.
Dear All,
I want to limit file type like .jpg,.mpgv files while ataching files in attachment table in oracle apps. Also want to limit file size.
Please help.
ThanksRefer below link regd implementing file upload:
File Upload
We can get file type using
DataObject fileUploadData =
(DataObject)pageContext.getNamedDataObject("fileInput2");
//here OAFileUploadBean is "fileInput2"
String contentType = fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
Based on this file type write your login in processFormRequest.
Will let you know if I find anything about size also.
-Anand -
Max file size of input schedule
Hello experts,
We are using BPC 7.5 NW sp4
I've created input schedule and it's size about 6MB. I tried to save this input schedule, but system returns error.
Currently the biggest file I've managed to save is 2MB
Does anybody know max allowed size of file for input schedules and reports? And How we can change this parameter
Best regards,
Evgen ChadiukHi Evgen,
BPC doesn't handle upload of large files through the Excel interface very well. If you go into UJFS (in BW) and find the input schedules for your application, you should be able to upload the input schedule through that interface.
A good way to "compress" reports and input schedules is to delete all data from them before saving. I don't know if this will work in your case, but maybe it's another option.
Ethan -
File size expands exporting Pages to Word
Just recently when I export a file from Pages to Word the file size has jumped considerably. For example, a 187 KB file in pages becomes a 553 KB file in word .docx and 1.6 MB file in .doc. MacBook Pro running OSX 10.9.5 and Pages 5.2.2. I do not have Word on my Mac, but I MUST be able to convert and keep small files small. This same file in March 2014 was converting to 18 KB when in Word. What is happening and how do I fix it?
Thanks. I do have that version, and I just tried to open the file I was working on yesterday, but I received an error message that I need a new version of Pages in order to open it. I can mess around and copy and paste and work around this, most likely, but it's really a pain. Is there a way to push Apple to fix this? Is there an update with the new OSX that may alleviate this problem? I certainly hate to have to switch word processing programs. This is what I do for a living, and I need the technology to be a help rather than a hindrance.
Maybe you are looking for
-
Oracle 8.1.5 for linux, install help.
Does anyone have a successful installation of Oracle 8.1.5 running on Red Hat 6.0? I have tried to install it but, I can't get the installer to run. I get java errors when I run, runInstaller. I have installed jre1.1.6. Any help would be appreciated.
-
Issue regarding folder access from job server?
Hello, We are using SAP BODS 4.0 sp2 setup. There is a requirement in our project. We are generating a text file as output and we are placing it in folder(particular path) on the job server. We have created user id and given access to the folder to e
-
Reading Session Variables in Abstract Portal Component/ JSP Dynpage or Java
Hi All, I have a web dynpro for Java component which passes parameters in a session and also navigates to a Java application. Now when I try to read the session parameters in the Java application (JSPDynpage or Abstract Portal Component) I cannot ret
-
The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it
-
Hi , I have 8 cpus on my server . I want to insert data from tab1 into tab2 as follows : insert into user1.tab1 select * from user1.tab2 ; I wanted to utilize the parallel option in above query and i tried INSERT /*+ PARALLEL(user1.tab1,5) */ INTO us